C8051F560-IM - 50MHz 32KB CAN/LIN MCU | Silicon Labs
MPN: C8051F560-IM ✓ सक्रियC8051F560-IM अवलोकन
An 8-bit microcontroller is a compact digital controller built around a central processing unit, memory, peripherals, and communication interfaces. The C8051F56x family combines the established 8051 instruction architecture with mixed-signal conversion functions and automotive-oriented communications. It belongs to the MCU hierarchy and is designed for embedded control, monitoring, and communication tasks where a 32-QFN footprint supports compact, surface-mount assemblies.
The device provides 32 KB of program flash for firmware, 2.25 KB of RAM for working data, and a maximum clock speed of 50 MHz. Its 12-bit analog-to-digital converter can use up to 25 single-ended external inputs, with references selectable from the on-chip reference, an external pin, or VDD. CAN 2.0 and LIN 2.1 support make the device suitable for distributed vehicle and industrial control networks.
The -IM ordering code uses a 32-QFN package measuring 5x5 mm and includes an exposed thermal pad. The listed operating-temperature range is -40 C to +125 C. All package options in the C8051F55x/F56x/F57x family are described as lead-free and RoHS compliant, while the -IM suffix identifies the industrial-temperature ordering option rather than the automotive-qualified -AM option.
Typical uses include CAN or LIN gateway controllers, industrial sensor nodes, automotive body and climate-control modules, motor-control peripherals, and compact embedded data-acquisition systems. The CAN and LIN interfaces reduce the need for separate protocol controllers, while the 12-bit ADC supports direct analog sensing without an external converter.
PCB implementation should use the manufacturer's exposed-pad and thermal-via recommendations. Place the exposed pad over a continuous copper area with multiple thermal vias, keep high-current return paths compact, and follow the datasheet layout for analog, clock, and communication signals. Power sequencing and decoupling should preserve a stable supply across the 1.8 V to 5.25 V operating range.
This page consolidates the principal specifications, package details, application guidance, selection trade-offs, and verified same-family alternatives for engineers evaluating the C8051F560-IM in embedded communication and mixed-signal control designs.
के लिए ड्रॉप-इन विकल्प C8051F560-IM — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं C8051F560-IM (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Automotive Qualification, Package, RAM, Serial Interfaces.
C8051F562-IM
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
C8051F564-IM
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
C8051F566-IM
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
C8051F560-IM Maximum Ratings और Electrical Characteristics
| Architecture | 8-bit 8051 with C8051F56x mixed-signal features |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 50 MHz |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 2.25 KB |
| Supply Voltage Range | 1.8 V to 5.25 V |
| ADC Resolution | 12 bit |
| External Single-Ended ADC Inputs | Up to 25 inputs |
| ADC Conversion Rate | Up to 200 ksps |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| Serial Interfaces | SPI, UART, and I2C |
| ऑपरेटिंग तापमान रेंज | -40 C to +125 C |
| पैकेज | 32-QFN with exposed pad, 5x5 mm |
| माउंटिंग प्रकार | Surface mount |
| Lead-Free Status | Lead-free package options |
| RoHS स्थिति | RoHS compliant |
| Automotive Qualification | Not indicated for the -IM ordering option |
C8051F560-IM 32-qfn with exposed pad, 5x5 mm पिन कॉन्फ़िगरेशन गाइड
C8051F560-IM (32-qfn with exposed pad, 5x5 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: C8051F560-IM.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
C8051F560-IM के लिए उपयुक्त है 6 अनुप्रयोगs: CAN and LIN Network Gateway, Industrial Sensor and Condition Monitoring, Automotive Body Control Module, Motor Control and Actuator Interface, Mixed-Signal Data Acquisition, Communication Bridge and Protocol Converter.
CAN and LIN Network Gateway
The C8051F560-IM fits a compact gateway that must participate in both CAN 2.0 and LIN 2.1 networks because both interfaces are integrated into the same 8-bit MCU. Its 50 MHz clock supports deterministic communication servicing, while 32 KB of flash provides room for protocol stacks and 2.25 KB of RAM supports packet buffering and state management. The 32-QFN 5x5 mm package also preserves a compact board footprint. Engineers should verify timing, transceiver levels, termination, and fault behavior for each network, particularly where automotive qualification is required.
अनुशंसित
Industrial Sensor and Condition Monitoring
The C8051F560-IM is appropriate for industrial sensor nodes that need local analog measurement and networked reporting in one package. Its 12-bit ADC supports up to 25 external single-ended inputs and conversion rates up to 200 ksps, while the 1.8 V to 5.25 V supply range accommodates low-voltage sensing electronics. The MCU can sample transducers, apply filtering, and transmit results through CAN, LIN, UART, or I2C. A practical design should separate analog and digital return paths, provide stable ADC references, and validate sensor accuracy across the full -40 C to +125 C range.
अनुशंसित
Automotive Body Control Module
The C8051F560-IM supports compact body-control and climate-control modules that need CAN or LIN communication plus local mixed-signal control. The 50 MHz processor, 32 KB flash, 2.25 KB RAM, and 12-bit ADC cover typical switch, sensor, and actuator coordination functions. The -IM ordering option is rated from -40 C to +125 C, making it suitable for harsh temperature environments, but Silicon Labs identifies the -AM family option as the automotive-tested and qualified choice. Vehicle programs should therefore confirm whether -IM or -AM is required by their quality requirements.
अनुशंसित
Motor Control and Actuator Interface
The C8051F560-IM can serve as the supervisory controller in a motor or actuator subsystem where sensing, control sequencing, and communications are required. Its 12-bit ADC is suitable for monitoring analog command or feedback signals, and CAN, LIN, UART, and SPI provide multiple paths for connecting to power electronics and system controllers. The 32-QFN footprint reduces board area in compact assemblies. Designers should allocate precise timing for control tasks, isolate noisy motor paths, use suitable external drive circuitry, and validate operation over the full 1.8 V to 5.25 V supply range.
अनुशंसित
Mixed-Signal Data Acquisition
The C8051F560-IM is useful for compact data-acquisition systems that must convert several analog inputs and process or transmit the measurements locally. Its 12-bit ADC provides up to 25 external single-ended inputs and up to 200 ksps conversion performance, while available reference sources support measurement designs using the internal reference, an external reference, or VDD. The MCU can then transfer data through UART, SPI, I2C, CAN, or LIN. Good results depend on controlled source impedance, suitable sampling time, reference stability, analog filtering, and a layout that prevents switching activity from coupling into measured signals.
अनुशंसित
Communication Bridge and Protocol Converter
The C8051F560-IM fits protocol-conversion products that bridge CAN or LIN with UART, SPI, or I2C. The 8051-compatible architecture provides a familiar firmware platform, while 32 KB of flash can hold bridging logic and 2.25 KB of RAM can support message queues. Integrating several serial interfaces reduces board area, and the 50 MHz operating speed provides processing margin for message routing. Production designs should verify protocol timing, baud-rate tolerance, bus arbitration behavior, timeout handling, and bootloader behavior because equivalent interfaces do not guarantee identical interrupt or peripheral implementations across family members.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा C8051F560-IM — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | C8051F562-IM | C8051F564-IM | C8051F566-IM |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 32-QFN (5x5 mm) with exposed pad | 32-QFN (5x5 mm) with exposed pad | 32-QFN (5x5 mm) with exposed pad | 32-QFN (5x5 mm) with exposed pad |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB |
| Supply Voltage Range | 1.8 V to 5.25 V | 1.8 V to 5.25 V | 1.8 V to 5.25 V | 1.8 V to 5.25 V |
| Communication Interfaces | CAN 2.0, LIN 2.1, SPI, UART, and I2C | C8051F56x family CAN and LIN interfaces | C8051F56x family CAN and LIN interfaces | C8051F56x family CAN and LIN interfaces |
| Operating Temperature Range | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
मुख्य विशेषताएँ
- Combines dual vehicle-network support with local analog conversion (बनामC8051F564-IM)
- Provides 32 KB of flash and 2.25 KB of RAM for embedded control firmware (बनामC8051F562-IM)
- Supports an industrial temperature range for harsh operating environments (बनामC8051F566-IM)
डिज़ाइन नोट्स
Use the exposed pad as the primary thermal path for the 32-QFN package. Place the pad over a continuous copper region and add the manufacturer-recommended thermal vias beneath the device; avoid placing a void directly under the pad. Keep nearby heat-producing components separated where practical. Because the listed -40 C to +125 C rating describes the device's operating capability, verify the assembled junction temperature in the final enclosure under maximum clock activity, communications traffic, and ambient temperature.
Follow the family datasheet layout for supply connections and exposed-pad implementation rather than treating the QFN as a generic 32-pin footprint. Place local supply decoupling at the device power pins with short, low-inductance connections, and provide a solid ground reference beneath and around the package. Check all pins against the ordering table for the -IM configuration because the family contains related devices with different package options and peripheral assignments.
Separate analog inputs and reference routing from CAN, LIN, clock, and switching-related traces. Use a quiet ground path for the ADC and reference circuitry, and place filtering close to the measured source when lead or trace resistance could affect the acquisition. The converter supports up to 25 external single-ended inputs at rates up to 200 ksps, but practical accuracy still depends on source impedance, sampling time, reference stability, and control of unwanted coupling.
Do not assume that two C8051F56x members are firmware-compatible solely because their speed and memory ratings match. Compare the pin-description table, interrupt vectors, clock configuration, ADC channels, communication peripherals, and package options for the exact ordering code. The -IM option is industrial-temperature, while Silicon Labs identifies -AM devices as receiving additional automotive testing and qualification. Choose the suffix according to the product's environmental and quality requirements.
अनुपालन जानकारी
The Silicon Labs family datasheet states that the C8051F55x/F56x/F57x package options are lead-free and RoHS compliant. The -IM ordering option is described as industrial-temperature, while -AM devices have received additional automotive testing and qualification.