Silicon Labs

C8051F560-IM - 50MHz 32KB CAN/LIN MCU | Silicon Labs

N.º de pieza: C8051F560-IM ✓ Activo
1.8 V to 5.25 V Vdss 32-QFN with exposed pad, 5x5 mm Package 50 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

C8051F560-IM Descripción general

The Silicon Labs C8051F560-IM is an 8-bit C8051F56x mixed-signal microcontroller operating up to 50 MHz, with 32 KB of embedded flash, 2.25 KB of RAM, and a 32-QFN 5x5 mm package with an exposed pad. It supports a 1.8 V to 5.25 V supply range and integrates CAN 2.0, LIN 2.1, SPI, UART, and I2C communication interfaces.

An 8-bit microcontroller is a compact digital controller built around a central processing unit, memory, peripherals, and communication interfaces. The C8051F56x family combines the established 8051 instruction architecture with mixed-signal conversion functions and automotive-oriented communications. It belongs to the MCU hierarchy and is designed for embedded control, monitoring, and communication tasks where a 32-QFN footprint supports compact, surface-mount assemblies.

The device provides 32 KB of program flash for firmware, 2.25 KB of RAM for working data, and a maximum clock speed of 50 MHz. Its 12-bit analog-to-digital converter can use up to 25 single-ended external inputs, with references selectable from the on-chip reference, an external pin, or VDD. CAN 2.0 and LIN 2.1 support make the device suitable for distributed vehicle and industrial control networks.

The -IM ordering code uses a 32-QFN package measuring 5x5 mm and includes an exposed thermal pad. The listed operating-temperature range is -40 C to +125 C. All package options in the C8051F55x/F56x/F57x family are described as lead-free and RoHS compliant, while the -IM suffix identifies the industrial-temperature ordering option rather than the automotive-qualified -AM option.

Typical uses include CAN or LIN gateway controllers, industrial sensor nodes, automotive body and climate-control modules, motor-control peripherals, and compact embedded data-acquisition systems. The CAN and LIN interfaces reduce the need for separate protocol controllers, while the 12-bit ADC supports direct analog sensing without an external converter.

PCB implementation should use the manufacturer's exposed-pad and thermal-via recommendations. Place the exposed pad over a continuous copper area with multiple thermal vias, keep high-current return paths compact, and follow the datasheet layout for analog, clock, and communication signals. Power sequencing and decoupling should preserve a stable supply across the 1.8 V to 5.25 V operating range.

This page consolidates the principal specifications, package details, application guidance, selection trade-offs, and verified same-family alternatives for engineers evaluating the C8051F560-IM in embedded communication and mixed-signal control designs.

Alternativas directas para C8051F560-IM — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con C8051F560-IM (mismo factor de forma y huella) — difiere en Automotive Qualification, Package, RAM, Serial Interfaces.

Silicon Labs
Automotive Qualification: Not designated as an automotive -AM device
Package: 24-QFN, 4 x 4 mm, exposed pad
RAM: 2.25K x 8
Comparar con C8051F560-IM →

C8051F562-IM

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 32-QFN (5x5 mm)
Core speed and flash remain 50 MHz and 32 KB, a 0% change; device-specific peripheral mix must be checked

📋 Alternativa de referencia (no en el catálogo)

C8051F564-IM

✅ Sustitución directa
📦 32-QFN (5x5 mm)
Core speed and flash remain 50 MHz and 32 KB, a 0% change; verify peripheral and interrupt-vector differences

📋 Alternativa de referencia (no en el catálogo)

C8051F566-IM

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 32-QFN (5x5 mm)
Core speed and flash remain 50 MHz and 32 KB, a 0% change; analog and communication peripheral availability must be checked

📋 Alternativa de referencia (no en el catálogo)

C8051F560-IM Valores máximos y características eléctricas

Architecture 8-bit 8051 with C8051F56x mixed-signal features
Frecuencia de reloj máxima 50 MHz
Flash Memory 32 KB (32K x 8)
RAM 2.25 KB
Supply Voltage Range 1.8 V to 5.25 V
ADC Resolution 12 bit
External Single-Ended ADC Inputs Up to 25 inputs
ADC Conversion Rate Up to 200 ksps
CAN Interface CAN 2.0
LIN Interface LIN 2.1
Serial Interfaces SPI, UART, and I2C
Rango de temperatura de funcionamiento -40 C to +125 C
Encapsulado 32-QFN with exposed pad, 5x5 mm
Tipo de montaje Surface mount
Lead-Free Status Lead-free package options
Estado RoHS RoHS compliant
Automotive Qualification Not indicated for the -IM ordering option

Guía de configuración de pines de C8051F560-IM 32-qfn with exposed pad, 5x5 mm

Configuración de pines para C8051F560-IM (encapsulado 32-qfn with exposed pad, 5x5 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 32-qfn with exposed pad, 5x5 mm para C8051F560-IM

No hay datos detallados de patillaje disponibles para C8051F560-IM.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

C8051F560-IM es adecuado para 6 aplicacións: CAN and LIN Network Gateway, Industrial Sensor and Condition Monitoring, Automotive Body Control Module, Motor Control and Actuator Interface, Mixed-Signal Data Acquisition, Communication Bridge and Protocol Converter.

🌐

CAN and LIN Network Gateway

The C8051F560-IM fits a compact gateway that must participate in both CAN 2.0 and LIN 2.1 networks because both interfaces are integrated into the same 8-bit MCU. Its 50 MHz clock supports deterministic communication servicing, while 32 KB of flash provides room for protocol stacks and 2.25 KB of RAM supports packet buffering and state management. The 32-QFN 5x5 mm package also preserves a compact board footprint. Engineers should verify timing, transceiver levels, termination, and fault behavior for each network, particularly where automotive qualification is required.

🏭

Industrial Sensor and Condition Monitoring

The C8051F560-IM is appropriate for industrial sensor nodes that need local analog measurement and networked reporting in one package. Its 12-bit ADC supports up to 25 external single-ended inputs and conversion rates up to 200 ksps, while the 1.8 V to 5.25 V supply range accommodates low-voltage sensing electronics. The MCU can sample transducers, apply filtering, and transmit results through CAN, LIN, UART, or I2C. A practical design should separate analog and digital return paths, provide stable ADC references, and validate sensor accuracy across the full -40 C to +125 C range.

🚗

Automotive Body Control Module

The C8051F560-IM supports compact body-control and climate-control modules that need CAN or LIN communication plus local mixed-signal control. The 50 MHz processor, 32 KB flash, 2.25 KB RAM, and 12-bit ADC cover typical switch, sensor, and actuator coordination functions. The -IM ordering option is rated from -40 C to +125 C, making it suitable for harsh temperature environments, but Silicon Labs identifies the -AM family option as the automotive-tested and qualified choice. Vehicle programs should therefore confirm whether -IM or -AM is required by their quality requirements.

🔧

Motor Control and Actuator Interface

The C8051F560-IM can serve as the supervisory controller in a motor or actuator subsystem where sensing, control sequencing, and communications are required. Its 12-bit ADC is suitable for monitoring analog command or feedback signals, and CAN, LIN, UART, and SPI provide multiple paths for connecting to power electronics and system controllers. The 32-QFN footprint reduces board area in compact assemblies. Designers should allocate precise timing for control tasks, isolate noisy motor paths, use suitable external drive circuitry, and validate operation over the full 1.8 V to 5.25 V supply range.

📟

Mixed-Signal Data Acquisition

The C8051F560-IM is useful for compact data-acquisition systems that must convert several analog inputs and process or transmit the measurements locally. Its 12-bit ADC provides up to 25 external single-ended inputs and up to 200 ksps conversion performance, while available reference sources support measurement designs using the internal reference, an external reference, or VDD. The MCU can then transfer data through UART, SPI, I2C, CAN, or LIN. Good results depend on controlled source impedance, suitable sampling time, reference stability, analog filtering, and a layout that prevents switching activity from coupling into measured signals.

🔌

Communication Bridge and Protocol Converter

The C8051F560-IM fits protocol-conversion products that bridge CAN or LIN with UART, SPI, or I2C. The 8051-compatible architecture provides a familiar firmware platform, while 32 KB of flash can hold bridging logic and 2.25 KB of RAM can support message queues. Integrating several serial interfaces reduces board area, and the 50 MHz operating speed provides processing margin for message routing. Production designs should verify protocol timing, baud-rate tolerance, bus arbitration behavior, timeout handling, and bootloader behavior because equivalent interfaces do not guarantee identical interrupt or peripheral implementations across family members.

What are the key specifications of C8051F560-IM that engineers should know?
The C8051F560-IM is an 8-bit mixed-signal MCU with a 50 MHz maximum clock, 32 KB of flash, 2.25 KB of RAM, and a 1.8 V to 5.25 V operating supply range. According to the Silicon Labs C8051F55x/F56x/F57x datasheet, the device includes a 12-bit ADC rated up to 200 ksps, CAN 2.0, LIN 2.1, SPI, UART, and I2C interfaces. It is offered in a 32-QFN 5x5 mm package with an exposed pad and an operating-temperature range of -40 C to +125 C.
What is the operating voltage of C8051F560-IM?
The C8051F560-IM operates from 1.8 V to 5.25 V. This range allows the microcontroller to support low-voltage digital systems as well as conventional 5 V industrial and vehicle electronics. According to the Silicon Labs family datasheet, the device also provides selectable ADC references from the on-chip reference, an external reference pin, or VDD. Design the regulator and decoupling network so that VDD remains within this range under transient load conditions.
What communication interfaces are available on C8051F560-IM?
The C8051F560-IM provides CAN 2.0, LIN 2.1, SPI, UART, and I2C interfaces. The Silicon Labs product listing identifies the same interface set for the C8051F56x family, while the manufacturer family datasheet defines the electrical and peripheral details. CAN supports network-oriented vehicle and industrial control, LIN suits lower-cost single-wire nodes, and SPI, UART, and I2C provide flexible links to sensors, memories, transceivers, and other controllers.
Where can I download the C8051F560-IM datasheet PDF?
The C8051F560-IM is covered by the Silicon Labs C8051F55x/F56x/F57x family datasheet, available from the official manufacturer document at https://www.silabs.com/documents/public/data-sheets/C8051F55x-F56x-F57x.pdf. The PDF contains the shared family architecture, electrical characteristics, pin descriptions, ordering information, and application guidance. Use the device-ordering table to confirm the exact -IM package and temperature configuration before applying the document to a design.
Where can I find the C8051F560-IM pinout and package information?
The C8051F560-IM uses a 32-QFN package measuring 5x5 mm with an exposed pad. Its detailed pin-description and package diagrams are located in the Silicon Labs C8051F55x/F56x/F57x manufacturer datasheet. Engineers should use the pin-description table to assign power, ground, analog, clock, programming, and communication signals rather than relying only on a distributor preview. The exposed-pad layout and recommended thermal-via pattern must also be followed for reliable heat transfer.
Is C8051F560-IM suitable for CAN and LIN automotive electronics?
The C8051F560-IM is suitable for industrial-temperature CAN and LIN control systems because it provides CAN 2.0, LIN 2.1, and a -40 C to +125 C temperature range. Silicon Labs states that the -AM devices, rather than the -IM devices, have received additional automotive testing and qualification. Therefore, an automotive production design should verify the -AM ordering option when automotive qualification is required, while the -IM part remains suited to industrial, aftermarket, or non-qualified vehicle electronics.
Can C8051F564-IM replace C8051F560-IM?
C8051F564-IM is the closest identified member of the same C8051F56x family for evaluating a replacement, but equivalence must be confirmed at the peripheral and pin level. Both the target listing and the cross-reference results associate the C8051F56x family with 50 MHz operation, 32 KB of flash, CAN, LIN, SPI, UART, and I2C. The manufacturer ordering table and family datasheet should be checked for package pin assignments, exposed-pad connection, device-specific peripherals, and qualification before approving the substitution.
What can replace C8051F560-IM without changing the PCB footprint?
The C8051F560-IM footprint can be retained only when the replacement uses the same 32-QFN 5x5 mm body and exposed-pad arrangement and has a verified pin-for-pin match. Identified same-family candidates include C8051F562-IM, C8051F564-IM, and C8051F566-IM, but their peripheral assignments and qualification details must be compared with the manufacturer datasheet. A footprint match alone does not guarantee firmware, timing, or analog-function compatibility, so prototype validation remains essential.
What is the difference between C8051F560-IM and C8051F560-IMR?
C8051F560-IM and C8051F560-IMR both identify a 32-QFN C8051F560-family device, but the ordering suffixes can represent different reel or packing configurations. The -IMR listing describes the same core device attributes, including 50 MHz operation, 32 KB of flash, CAN, LIN, SPI, UART, and I2C. Because the suffix concerns ordering and packaging rather than an electrical redesign, it may fit the same footprint, but procurement drawings and the manufacturer ordering table should confirm the exact mechanical and packing requirements.
When should I choose C8051F560-IM over another 8-bit MCU?
Choose the C8051F560-IM when a design requires the combined 50 MHz C8051 core, 32 KB flash, 2.25 KB RAM, 12-bit ADC, CAN 2.0, LIN 2.1, and a compact 32-QFN footprint. It is particularly useful in industrial or vehicle-control nodes where CAN and LIN are both required. Select another MCU when the design needs substantially more RAM, a different instruction set, broader software ecosystem, or a package and qualification profile outside the C8051F56x family.
Is C8051F560-IM a drop-in replacement for C8051F564-IM?
The C8051F560-IM and C8051F564-IM appear suitable for footprint-level evaluation as members of the C8051F56x family in a 32-QFN configuration, but they should not be treated as automatically interchangeable. The family shares a 50 MHz clock and 32 KB flash positioning, while individual devices can differ in peripheral availability, interrupt vectors, analog functions, and package details. Use the Silicon Labs ordering information and family datasheet to compare every assigned pin, then validate firmware and mixed-signal behavior on hardware.
Where can I buy C8051F560-IM and how do I request current availability?
Use the Request a Quote form on this page to request current C8051F560-IM availability, lead time, and order handling for the exact 32-QFN ordering code. Confirm the required reel or packing suffix, quantity, and delivery destination in the request because the -IM suffix and alternate -IMR ordering code can represent different packing arrangements. Stock status should be checked at the time of quotation rather than relying on a historical listing, particularly for active microcontrollers distributed through multiple channels.
What is the price of C8051F560-IM?
Current pricing for the C8051F560-IM should be requested through the Request a Quote form on this page using the exact MPN C8051F560-IM. The quotation should identify the requested package suffix, packing option, quantity, and currency. Historical distributor pricing can fluctuate with inventory, quantity breaks, and order volume, so it is not used as a fixed customer-facing price. Use the quotation response for production budgeting and procurement approval.
What is the lead time and stock status for C8051F560-IM?
The current stock position and lead time for C8051F560-IM should be confirmed through the Request a Quote form on this page. Request the quantity, reel or packing configuration, destination, and required delivery schedule so the supplier response reflects the actual manufacturing and logistics position. Do not infer availability from general distributor search pages, because historical inventory can change quickly. The exact MPN and packaging suffix are essential when requesting a firm delivery commitment.
How much power and thermal margin does the C8051F560-IM QFN package provide?
The C8051F560-IM is supplied in a 32-QFN package with an exposed pad that provides the primary path for heat removal. Its -40 C to +125 C temperature rating describes device capability, while actual junction temperature depends on clock activity, enabled peripherals, supply voltage, ambient temperature, and PCB copper. Follow the exposed-pad and thermal-via layout in the Silicon Labs family datasheet, and verify temperature rise in the assembled enclosure rather than relying on the package rating alone.
Is there a Silicon Labs equivalent with more memory for the C8051F560-IM application?
A higher-memory replacement must be selected from the broader C8051 family only after comparing package pins, peripheral assignments, flash, RAM, communication interfaces, and qualification. The C8051F560-IM provides 32 KB of flash and 2.25 KB of RAM, so firmware growth, buffering, or protocol tables may justify a device with more memory. Use the Silicon Labs product-selection tables and family datasheet to identify a device with the same 32-QFN footprint and preserved CAN, LIN, analog, clock, and programming requirements.

Datos de referencia de ingeniería para C8051F560-IM — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the C8051F560-IM when the design benefits from a 50 MHz 8-bit MCU with 32 KB of flash, 2.25 KB of RAM, a 12-bit ADC, CAN 2.0, LIN 2.1, and a compact 32-QFN footprint. It is particularly effective in industrial sensor nodes, mixed-signal data-acquisition units, protocol bridges, and compact vehicle electronics. Consider C8051F562-IM, C8051F564-IM, or C8051F566-IM when their specific peripheral set better matches an existing design, but confirm pin assignments, interrupt vectors, and firmware implications before substitution. Select an -AM ordering option when the manufacturing program requires the additional automotive testing and qualification associated with that family. If the application exceeds the available RAM or flash, requires a different instruction set, or needs a larger ecosystem and wider connectivity, move to a higher-capacity MCU rather than forcing a same-family replacement.

Comparación con alternativas

Parámetro Este producto C8051F562-IM C8051F564-IM C8051F566-IM
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 32-QFN (5x5 mm) with exposed pad 32-QFN (5x5 mm) with exposed pad 32-QFN (5x5 mm) with exposed pad 32-QFN (5x5 mm) with exposed pad
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz 50 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB
Supply Voltage Range 1.8 V to 5.25 V 1.8 V to 5.25 V 1.8 V to 5.25 V 1.8 V to 5.25 V
Communication Interfaces CAN 2.0, LIN 2.1, SPI, UART, and I2C C8051F56x family CAN and LIN interfaces C8051F56x family CAN and LIN interfaces C8051F56x family CAN and LIN interfaces
Operating Temperature Range -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C

Diferenciadores clave

  • Combines dual vehicle-network support with local analog conversion (frente a C8051F564-IM)
  • Provides 32 KB of flash and 2.25 KB of RAM for embedded control firmware (frente a C8051F562-IM)
  • Supports an industrial temperature range for harsh operating environments (frente a C8051F566-IM)

Notas de diseño

Use the exposed pad as the primary thermal path for the 32-QFN package. Place the pad over a continuous copper region and add the manufacturer-recommended thermal vias beneath the device; avoid placing a void directly under the pad. Keep nearby heat-producing components separated where practical. Because the listed -40 C to +125 C rating describes the device's operating capability, verify the assembled junction temperature in the final enclosure under maximum clock activity, communications traffic, and ambient temperature.

Follow the family datasheet layout for supply connections and exposed-pad implementation rather than treating the QFN as a generic 32-pin footprint. Place local supply decoupling at the device power pins with short, low-inductance connections, and provide a solid ground reference beneath and around the package. Check all pins against the ordering table for the -IM configuration because the family contains related devices with different package options and peripheral assignments.

Separate analog inputs and reference routing from CAN, LIN, clock, and switching-related traces. Use a quiet ground path for the ADC and reference circuitry, and place filtering close to the measured source when lead or trace resistance could affect the acquisition. The converter supports up to 25 external single-ended inputs at rates up to 200 ksps, but practical accuracy still depends on source impedance, sampling time, reference stability, and control of unwanted coupling.

Do not assume that two C8051F56x members are firmware-compatible solely because their speed and memory ratings match. Compare the pin-description table, interrupt vectors, clock configuration, ADC channels, communication peripherals, and package options for the exact ordering code. The -IM option is industrial-temperature, while Silicon Labs identifies -AM devices as receiving additional automotive testing and qualification. Choose the suffix according to the product's environmental and quality requirements.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The Silicon Labs family datasheet states that the C8051F55x/F56x/F57x package options are lead-free and RoHS compliant. The -IM ordering option is described as industrial-temperature, while -AM devices have received additional automotive testing and qualification.

Búsquedas relacionadas

C8051F560-IM datasheet C8051F560-IM specifications C8051F560-IM pinout C8051F560-IM datasheet pdf C8051F560-IM 32-QFN C8051F560-IM equivalent C8051F560-IM replacement C8051F560-IM cross reference C8051F560-IM vs C8051F564-IM Silicon Labs C8051F560-IM C8051F560-IM CAN LIN application circuit C8051F560-IM price

Componentes & términos relacionados

Silicon Labs C8051F560-IM C8051F562-IM C8051F564-IM C8051F566-IM C8051F56x 8-bit microcontroller mixed-signal MCU 8051 architecture embedded microcontroller semiconductor 32-QFN package QFN family surface-mount package exposed pad CAN 2.0 LIN 2.1 SPI UART I2C 12-bit ADC industrial temperature range RoHS lead-free packaging
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ