C8051F806-GU - 25MHz 16KB Flash MCU | Silicon Labs
MPN: C8051F806-GU ✓ सक्रियC8051F806-GU अवलोकन
A mixed-signal microcontroller is a semiconductor device that integrates digital processing with functions such as ADC, DAC, comparators, and sensor interfaces. The C8051F806-GU belongs to the 8051-compatible MCU family and combines a general-purpose control processor with mixed-signal acquisition and output circuitry. This integration can reduce component count, board area, and system complexity when an application requires both control logic and analog measurement.
The device operates at 25 MHz and provides 16 KB of Flash program memory. Its 8-bit architecture supports embedded control tasks that do not require the processing capacity of a 32-bit MCU. On-chip resources include an ADC, a DAC, one comparator, and an on-chip temperature sensor, while the capacitive-touch feature supports touch-sensitive human interfaces. These functions make the device relevant to panel controls, compact instruments, consumer appliances, and embedded sensing products.
The C8051F806-GU combines the familiar 8051 instruction set with dedicated mixed-signal peripherals. Its Flash memory permits firmware to be programmed after manufacture, simplifying configuration changes and production diagnostics. Because the ADC, DAC, comparator, and temperature sensor are integrated, designers can construct measurement and control loops without adding separate analog ICs when their specified performance satisfies the application.
Typical applications include capacitive-touch keypads, temperature-monitoring controls, compact sensor interfaces, analog signal conditioning, and low-cost embedded control panels. For designs operating from a 1.8 V to 3.6 V supply, the MCU supports both core and analog functions within one device. Battery-powered equipment should also account for the supply range and peripheral configuration during power-budget analysis.
PCB implementation requires attention to the 24-QSOP footprint, exposed ground connections, decoupling, and analog signal routing. Place input and output capacitors close to their associated pins, keep sensitive analog traces away from fast digital switching paths, and follow the package recommendations in the manufacturer datasheet. Firmware should also initialize the ADC, DAC, comparator, and temperature-sensor blocks before measurements are used.
This product page combines the C8051F806-GU specification summary, package information, qualified same-family alternatives, comparison criteria, and practical PCB design guidance. It helps engineers identify whether the 25 MHz 8051 core, 16 KB Flash configuration, capacitive-touch function, and integrated mixed-signal resources match the requirements of a new embedded design.
के लिए ड्रॉप-इन विकल्प C8051F806-GU — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं C8051F806-GU (समान फॉर्म फैक्टर और फुटप्रिंट).
C8051F802-GU
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
C8051F814-GU
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →C8051F800-GU
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
C8051F806-GU Maximum Ratings और Electrical Characteristics
| Product Type | 8-bit mixed-signal flash microcontroller |
| Processor Core | 8051-compatible 8-bit core |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 25 MHz |
| Program Memory Size | 16 KB Flash |
| Program Memory Organization | 16K x 8 bits |
| Supply Voltage Range | 1.8 V to 3.6 V |
| ADC | 1 ADC |
| DAC | 1 DAC |
| Comparator Count | 1 comparator |
| On-Chip Temperature Sensor | 1 integrated temperature sensor |
| Capacitive Touch | Supported |
| पैकेज | 24-QSOP |
| माउंटिंग प्रकार | Surface mount |
| पिन की संख्या | 24 pins |
| Flash Programming | In-system programming |
C8051F806-GU 24-qsop पिन कॉन्फ़िगरेशन गाइड
C8051F806-GU (24-qsop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: C8051F806-GU.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
C8051F806-GU के लिए उपयुक्त है 6 अनुप्रयोगs: Capacitive-Touch Control Panels, Temperature Monitoring Instruments, Compact Analog Signal-Control Products, Low-Voltage Sensor Interface Modules, Consumer Appliance User Interfaces, Programmable Test and Measurement.
Capacitive-Touch Control Panels
The C8051F806-GU suits compact control panels because its 25 MHz 8051-compatible core can process local button and menu logic while the integrated capacitive-touch function handles user input. With 16 KB of Flash, the device also has sufficient program-memory class for embedded interface firmware, including debounce, calibration, and status behavior. Its 1.8 V to 3.6 V supply range supports low-voltage panel electronics, and the 24-QSOP package limits board footprint. Designers should allocate the touch electrodes away from switching nodes, follow the recommended grounding approach, and verify channel count and sensitivity in the manufacturer datasheet before releasing the PCB.
अनुशंसित
Temperature Monitoring Instruments
The integrated temperature sensor gives the C8051F806-GU a practical role in compact thermal monitoring equipment. The 25 MHz 8-bit core can acquire readings, apply calibration, drive indicators, and communicate a measurement to a higher-level controller. Operating from 1.8 V to 3.6 V permits use in low-power instrumentation where the display, sensor interface, and MCU share a limited supply range. The 24-QSOP package also supports space-constrained products. Firmware should allow the sensor and ADC to stabilize before conversion, and PCB layout should keep thermal copper and analog traces away from digital switching activity to improve measurement repeatability.
अनुशंसित
Compact Analog Signal-Control Products
The C8051F806-GU integrates an ADC, a DAC, and one comparator within the same mixed-signal microcontroller, reducing the need for separate conversion devices in compact control products. Its 25 MHz 8051-compatible core can supervise acquisition, filtering, threshold decisions, and output updates, while 16 KB of Flash stores application firmware. The 1.8 V to 3.6 V operating range supports low-voltage industrial and consumer equipment. Keep analog inputs short and isolate them from high-current switching paths, use the specified decoupling arrangement, and confirm reference-voltage and conversion-resolution requirements in the manufacturer datasheet before finalizing analog calibration.
अनुशंसित
Low-Voltage Sensor Interface Modules
A 25 MHz 8-bit MCU with 16 KB of Flash is appropriate for local sensor conditioning where an external processor would add unnecessary cost and board area. The C8051F806-GU can read analog sensor outputs through its ADC, apply thresholds through the comparator, generate control or test signals through the DAC, and report status through available communications functions. Its 1.8 V to 3.6 V supply range is suitable for compact low-voltage modules. Preserve sensor-signal integrity by separating analog and digital return paths, placing support capacitors close to the device, and validating the conversion and comparator settings in firmware.
अनुशंसित
Consumer Appliance User Interfaces
The C8051F806-GU can consolidate appliance controls that require touch sensing, analog measurement, and embedded logic in a single 24-QSOP device. Its 25 MHz processing rate supports responsive control loops, while 16 KB of Flash accommodates firmware for user-interface behavior, diagnostics, and configuration. The 1.8 V to 3.6 V supply range helps align the controller with modern low-voltage appliance electronics. A capacitive keypad should be designed with clean electrode geometry and controlled grounding, while motor, relay, heater, and mains-connected stages must remain physically separated from the MCU and analog circuitry.
अनुशंसित
Programmable Test and Measurement
The combination of a 25 MHz 8051-compatible core, ADC, DAC, comparator, and 16 KB of Flash makes the C8051F806-GU suitable for compact programmable test equipment. The MCU can acquire a measured value, compare it against a threshold, generate an analog output, and coordinate a sequence of tests without requiring several separate mixed-signal ICs. Its 24-QSOP package helps minimize instrument size, and the 1.8 V to 3.6 V supply range supports portable low-voltage systems. Calibrate analog gain and offset over the intended temperature range, use stable references, and separate sensitive measurement paths from digital output edges.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा C8051F806-GU — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | C8051F802-GU | C8051F814-GU | C8051F800-GU |
|---|---|---|---|---|
| Package | 24-QSOP | 24-QSOP | 24-QSOP | 24-QSOP |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Architecture | 8-bit 8051-compatible core | 8-bit C8051F8xx architecture | 8-bit C8051F8xx architecture | 8-bit C8051F8xx architecture |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Program Memory | 16 KB Flash | 16 KB Flash | 16 KB Flash | 16 KB Flash |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Programming Interface | In-system Flash programming | In-system Flash programming | In-system Flash programming | In-system Flash programming |
मुख्य विशेषताएँ
- Integrated mixed-signal resource set (बनामC8051F802-GU)
- Capacitive-touch integration (बनामC8051F800-GU)
- Mixed-signal functionality in a compact package (बनामC8051F814-GU)
डिज़ाइन नोट्स
Use the 24-QSOP land pattern and pin numbering defined by the manufacturer package drawing. Place input and output capacitors adjacent to their associated pins, provide a low-impedance ground path, and route analog inputs away from digital clock and switching nets. Because the complete pin list is not shown on the product page, verify every signal against the manufacturer datasheet before releasing the PCB artwork.
Keep the ADC input, DAC output, comparator input, and temperature-sensor circuitry away from high-current switching paths and inductive components. Use a continuous ground reference beneath analog signals when the package and board construction permit it, and terminate unused inputs according to the manufacturer's recommendations. Separate analog filtering from MCU routing where the operating frequency and source impedance make coupling significant.
Do not treat a shared package name as proof that firmware and peripherals are interchangeable. Compare ADC channels, DAC availability, comparator behavior, touch resources, programming pins, reset requirements, and electrical limits between the C8051F806-GU and any proposed family alternative. Recheck startup, clock configuration, and conversion-settling sequences in firmware, especially when replacing an operating design.
अनुपालन जानकारी
Compliance status for the exact C8051F806-GU suffix was not identified. AEC-Q100 is not applicable because this product is a general-purpose microcontroller rather than an automotive-qualified device.