Silicon Labs

C8051F806-GU - 25MHz 16KB Flash MCU | Silicon Labs

N.º da peça: C8051F806-GU ✓ Ativo
1.8 V to 3.6 V Vdss 24-QSOP Package 25 MHz Speed 16 KB Flash Memory
MOQ: 1 |

C8051F806-GU Visão geral

The Silicon Labs C8051F806-GU is an 8-bit mixed-signal flash microcontroller with a 25 MHz 8051 core, 16 KB of program Flash, capacitive-touch capability, and a 24-QSOP package. Its operating supply range is 1.8 V to 3.6 V, combining a compact embedded control core with analog peripherals for cost-sensitive embedded products.

A mixed-signal microcontroller is a semiconductor device that integrates digital processing with functions such as ADC, DAC, comparators, and sensor interfaces. The C8051F806-GU belongs to the 8051-compatible MCU family and combines a general-purpose control processor with mixed-signal acquisition and output circuitry. This integration can reduce component count, board area, and system complexity when an application requires both control logic and analog measurement.

The device operates at 25 MHz and provides 16 KB of Flash program memory. Its 8-bit architecture supports embedded control tasks that do not require the processing capacity of a 32-bit MCU. On-chip resources include an ADC, a DAC, one comparator, and an on-chip temperature sensor, while the capacitive-touch feature supports touch-sensitive human interfaces. These functions make the device relevant to panel controls, compact instruments, consumer appliances, and embedded sensing products.

The C8051F806-GU combines the familiar 8051 instruction set with dedicated mixed-signal peripherals. Its Flash memory permits firmware to be programmed after manufacture, simplifying configuration changes and production diagnostics. Because the ADC, DAC, comparator, and temperature sensor are integrated, designers can construct measurement and control loops without adding separate analog ICs when their specified performance satisfies the application.

Typical applications include capacitive-touch keypads, temperature-monitoring controls, compact sensor interfaces, analog signal conditioning, and low-cost embedded control panels. For designs operating from a 1.8 V to 3.6 V supply, the MCU supports both core and analog functions within one device. Battery-powered equipment should also account for the supply range and peripheral configuration during power-budget analysis.

PCB implementation requires attention to the 24-QSOP footprint, exposed ground connections, decoupling, and analog signal routing. Place input and output capacitors close to their associated pins, keep sensitive analog traces away from fast digital switching paths, and follow the package recommendations in the manufacturer datasheet. Firmware should also initialize the ADC, DAC, comparator, and temperature-sensor blocks before measurements are used.

This product page combines the C8051F806-GU specification summary, package information, qualified same-family alternatives, comparison criteria, and practical PCB design guidance. It helps engineers identify whether the 25 MHz 8051 core, 16 KB Flash configuration, capacitive-touch function, and integrated mixed-signal resources match the requirements of a new embedded design.

Alternativas drop-in para C8051F806-GU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com C8051F806-GU (mesmo formato e footprint).

C8051F802-GU

✅ Drop-In
📦 24-QSOP
Same 25 MHz and 16 KB Flash classes and same 24-QSOP footprint; DAC, comparator, temperature-sensor, and touch feature mix differs, so pin-level and firmware validation is required.

📋 Alternativa de referência (fora do catálogo)

C8051F814-GU

✅ Drop-In
Silicon Labs
📦 24-QSOP
C8051F81x · 8-bit 8051 · 25 MHz · 8 KB (8K x 8) · 512 bytes (512 x 8 bits) · 17 · 3 V · Internal

Consulte o preço

Ver ficha técnica →

C8051F800-GU

✅ Drop-In
📦 24-QSOP
Shares the 25 MHz C8051F8xx architecture, 16 KB Flash class, and 24-QSOP footprint; ADC, DAC, comparator, temperature-sensor, and touch resources differ and must be checked.

📋 Alternativa de referência (fora do catálogo)

C8051F806-GU Classificações máximas e características elétricas

Product Type 8-bit mixed-signal flash microcontroller
Processor Core 8051-compatible 8-bit core
Frequência máxima de clock 25 MHz
Program Memory Size 16 KB Flash
Program Memory Organization 16K x 8 bits
Supply Voltage Range 1.8 V to 3.6 V
ADC 1 ADC
DAC 1 DAC
Comparator Count 1 comparator
On-Chip Temperature Sensor 1 integrated temperature sensor
Capacitive Touch Supported
Encapsulamento 24-QSOP
Tipo de montagem Surface mount
Número de pinos 24 pins
Flash Programming In-system programming

Guia de Configuração de Pinos do C8051F806-GU 24-qsop

Configuração de pinos para C8051F806-GU (pacote 24-qsop). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 24-qsop para C8051F806-GU

Nenhum dado detalhado de pinagem disponível para C8051F806-GU.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

C8051F806-GU é adequado para 6 aplicaçãos: Capacitive-Touch Control Panels, Temperature Monitoring Instruments, Compact Analog Signal-Control Products, Low-Voltage Sensor Interface Modules, Consumer Appliance User Interfaces, Programmable Test and Measurement.

🧩

Capacitive-Touch Control Panels

The C8051F806-GU suits compact control panels because its 25 MHz 8051-compatible core can process local button and menu logic while the integrated capacitive-touch function handles user input. With 16 KB of Flash, the device also has sufficient program-memory class for embedded interface firmware, including debounce, calibration, and status behavior. Its 1.8 V to 3.6 V supply range supports low-voltage panel electronics, and the 24-QSOP package limits board footprint. Designers should allocate the touch electrodes away from switching nodes, follow the recommended grounding approach, and verify channel count and sensitivity in the manufacturer datasheet before releasing the PCB.

💊

Temperature Monitoring Instruments

The integrated temperature sensor gives the C8051F806-GU a practical role in compact thermal monitoring equipment. The 25 MHz 8-bit core can acquire readings, apply calibration, drive indicators, and communicate a measurement to a higher-level controller. Operating from 1.8 V to 3.6 V permits use in low-power instrumentation where the display, sensor interface, and MCU share a limited supply range. The 24-QSOP package also supports space-constrained products. Firmware should allow the sensor and ADC to stabilize before conversion, and PCB layout should keep thermal copper and analog traces away from digital switching activity to improve measurement repeatability.

🏭

Compact Analog Signal-Control Products

The C8051F806-GU integrates an ADC, a DAC, and one comparator within the same mixed-signal microcontroller, reducing the need for separate conversion devices in compact control products. Its 25 MHz 8051-compatible core can supervise acquisition, filtering, threshold decisions, and output updates, while 16 KB of Flash stores application firmware. The 1.8 V to 3.6 V operating range supports low-voltage industrial and consumer equipment. Keep analog inputs short and isolate them from high-current switching paths, use the specified decoupling arrangement, and confirm reference-voltage and conversion-resolution requirements in the manufacturer datasheet before finalizing analog calibration.

📡

Low-Voltage Sensor Interface Modules

A 25 MHz 8-bit MCU with 16 KB of Flash is appropriate for local sensor conditioning where an external processor would add unnecessary cost and board area. The C8051F806-GU can read analog sensor outputs through its ADC, apply thresholds through the comparator, generate control or test signals through the DAC, and report status through available communications functions. Its 1.8 V to 3.6 V supply range is suitable for compact low-voltage modules. Preserve sensor-signal integrity by separating analog and digital return paths, placing support capacitors close to the device, and validating the conversion and comparator settings in firmware.

📱

Consumer Appliance User Interfaces

The C8051F806-GU can consolidate appliance controls that require touch sensing, analog measurement, and embedded logic in a single 24-QSOP device. Its 25 MHz processing rate supports responsive control loops, while 16 KB of Flash accommodates firmware for user-interface behavior, diagnostics, and configuration. The 1.8 V to 3.6 V supply range helps align the controller with modern low-voltage appliance electronics. A capacitive keypad should be designed with clean electrode geometry and controlled grounding, while motor, relay, heater, and mains-connected stages must remain physically separated from the MCU and analog circuitry.

🖥️

Programmable Test and Measurement

The combination of a 25 MHz 8051-compatible core, ADC, DAC, comparator, and 16 KB of Flash makes the C8051F806-GU suitable for compact programmable test equipment. The MCU can acquire a measured value, compare it against a threshold, generate an analog output, and coordinate a sequence of tests without requiring several separate mixed-signal ICs. Its 24-QSOP package helps minimize instrument size, and the 1.8 V to 3.6 V supply range supports portable low-voltage systems. Calibrate analog gain and offset over the intended temperature range, use stable references, and separate sensitive measurement paths from digital output edges.

Resumo dos produtos recomendados

C8051F802-GU Same-family 8051 microcontroller candidate for a reduced feature configuration Usado em: Capacitive-Touch Control Panels, Compact Analog Signal-Control Products, Low-Voltage Sensor Interface Modules, Programmable Test and Measurement C8051F814-GU Silicon Labs Usado em: Capacitive-Touch Control Panels, Compact Analog Signal-Control Products, Consumer Appliance User Interfaces, Programmable Test and Measurement C8051F800-GU Related 8051-family control option Usado em: Temperature Monitoring Instruments, Low-Voltage Sensor Interface Modules, Consumer Appliance User Interfaces C8051F806-GU Silicon Labs Usado em: Temperature Monitoring Instruments
What is the C8051F806-GU?
The C8051F806-GU is a Silicon Labs 8-bit mixed-signal flash microcontroller built around a 25 MHz 8051-compatible core. It includes 16 KB of Flash program memory, a 1.8 V to 3.6 V operating supply range, and a 24-QSOP package. The manufacturer datasheet also identifies integrated analog resources consisting of an ADC, a DAC, one comparator, and an on-chip temperature sensor.
What are the key specifications of C8051F806-GU that engineers should know?
The C8051F806-GU combines a 25 MHz 8-bit 8051-compatible processor, 16 KB of Flash program memory, and a 1.8 V to 3.6 V supply range in a 24-QSOP package. Its mixed-signal resources include an ADC, a DAC, one comparator, and an on-chip temperature sensor. Capacitive-touch support is also identified as a key feature, making the device appropriate for compact controls that combine logic, sensing, and analog output.
Where can I download the C8051F806-GU datasheet PDF?
The C8051F806-GU datasheet PDF can be reached through the linked Silicon Laboratories document listed on the product's datasheet page. Use the manufacturer datasheet when assigning every 24-QSOP pin, configuring the ADC and DAC, selecting decoupling, and checking the flash programming procedure. The linked PDF should be treated as the controlling document for electrical limits and package details.
Where can I find the C8051F806-GU pinout?
The C8051F806-GU pin assignments are found in the pin-description table and package drawing in the Silicon Laboratories datasheet. Use those diagrams when assigning power, ground, analog, programming, and communication signals. The public C8051F806-GU listing identifies the device as a 24-QSOP, but it does not display a complete pin table, so the schematic should be checked against the manufacturer package drawing before layout release.
Can the C8051F806-GU be used for capacitive-touch applications?
Yes, the C8051F806-GU is identified as a capacitive-touch 8-bit MCU. Its capacitive-touch capability can support touch-sensitive keypad and control-panel designs while the 25 MHz 8051-compatible core handles local logic. The exact number of touch channels, electrode configuration, and recommended sensing components should be confirmed in the manufacturer datasheet before fixing the PCB and firmware.
What is the C8051F806-GU supply voltage range?
The C8051F806-GU operates from 1.8 V to 3.6 V. This range allows the MCU to be used in low-voltage embedded systems without requiring a higher supply rail. Because the device also contains analog conversion resources, check the analog reference, digital core, and I/O voltage limits separately in the manufacturer datasheet when planning mixed-signal signal paths.
C8051F806-GU vs C8051F802-GU: which one is better for analog control?
The C8051F806-GU is the better choice when the design specifically needs its identified DAC, comparator, temperature sensor, and capacitive-touch resources. The C8051F802-GU is a related family member, but the two are not identical in every peripheral feature. The C8051F806-GU therefore offers the more complete mixed-signal feature set, while the C8051F802-GU may suit applications requiring less integrated analog functionality.
What is the difference between C8051F806-GU and C8051F814-GU?
Both devices belong to the C8051F8xx family and use the same 24-QSOP package designation, but their internal peripheral configurations differ. The C8051F806-GU is specifically identified with 16 KB of Flash, a 25 MHz core, an ADC, a DAC, one comparator, a temperature sensor, and capacitive-touch capability. The C8051F814-GU should be selected only after its own resource and electrical requirements are checked against the target design.
When should I choose C8051F806-GU over C8051F800-GU?
Choose the C8051F806-GU when the design benefits from its specifically identified DAC, comparator, on-chip temperature sensor, and capacitive-touch capability. The C8051F800-GU remains a related 8051-family choice, but it may not reproduce the same analog and user-interface feature set. The decision should be based on required peripherals, firmware support, memory, supply conditions, and the confirmed pin assignments of the chosen variant.
What can replace the C8051F806-GU?
The closest documented same-family options are the C8051F802-GU, C8051F800-GU, and C8051F814-GU because they are associated with the same 24-QSOP package family. A true drop-in replacement still requires verification of pin functions, peripheral resources, memory requirements, firmware compatibility, and electrical limits. Use the Request a Quote form on this page when availability or lead-time confirmation is required.
Is there a Silicon Labs drop-in replacement for the C8051F806-GU?
No fully verified drop-in replacement can be identified from the available documentation because the manufacturer pin table and detailed cross-reference specifications are required to prove interchangeability. C8051F802-GU, C8051F800-GU, and C8051F814-GU are same-family candidates in the 24-QSOP package family, but they should be treated as design-review candidates rather than unconditional substitutions. Confirm every pin and peripheral function before replacing an assembled design.
What is the best cross-brand equivalent for the C8051F806-GU?
No cross-brand equivalent is established as a true drop-in replacement for the C8051F806-GU. The C8051F806-GU combines a 25 MHz 8051-compatible core, 16 KB of Flash, a 1.8 V to 3.6 V supply range, capacitive-touch capability, and specific analog peripherals in a 24-QSOP package. A substitute with a similar MCU category or clock rate may still require pin, firmware, and peripheral changes.
Where can I buy the C8051F806-GU online?
Use the Request a Quote form on this page to request the C8051F806-GU, current commercial terms, and expected lead time. The part is listed with a manufacturer part number of C8051F806-GU and distributor ordering code 336-1776-5-ND. Confirm the exact suffix, package, and delivery requirements with the quotation response before issuing a purchase order.
What is the price of the C8051F806-GU?
The current commercial price is not stated in the visible product copy because it can change with quantity, supply status, and requested delivery terms. Use the Request a Quote form on this page for the applicable unit and volume pricing for the exact C8051F806-GU ordering code. The request should identify the required quantity, 24-QSOP package, and target schedule.
What is the lead time and stock status of the C8051F806-GU?
Current stock and lead time for the C8051F806-GU should be confirmed through the Request a Quote form on this page. The listing identifies the exact C8051F806-GU ordering code as 336-1776-5-ND, but a listing page alone does not guarantee immediate availability. Include your required quantity, delivery date, and approved manufacturer or manufacturer-approved sourcing requirements in the request.

Dados de referência de engenharia para C8051F806-GU — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the C8051F806-GU when a design needs an 8051-compatible 8-bit MCU with 25 MHz operation, 16 KB of Flash, a 1.8 V to 3.6 V supply, capacitive-touch input, and integrated ADC, DAC, comparator, and temperature-sensor resources. Its 24-QSOP package is appropriate for compact embedded products where conserving board area is important. Consider the C8051F802-GU when the required application can operate with a reduced peripheral set and you have completed a detailed pin and firmware comparison. Consider the C8051F814-GU when its specific mixed-signal configuration matches the design more closely than the C8051F806-GU. The C8051F800-GU is another related family option for simpler control tasks. For every candidate, verify pin functions, peripheral availability, memory, clocking, programming, electrical limits, and existing firmware dependencies before approving a substitution.

Comparação com alternativas

Parâmetro Este produto C8051F802-GU C8051F814-GU C8051F800-GU
Package 24-QSOP 24-QSOP 24-QSOP 24-QSOP
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Architecture 8-bit 8051-compatible core 8-bit C8051F8xx architecture 8-bit C8051F8xx architecture 8-bit C8051F8xx architecture
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz
Program Memory 16 KB Flash 16 KB Flash 16 KB Flash 16 KB Flash
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V
Programming Interface In-system Flash programming In-system Flash programming In-system Flash programming In-system Flash programming

Principais diferenciais

  • Integrated mixed-signal resource set (vs C8051F802-GU)
  • Capacitive-touch integration (vs C8051F800-GU)
  • Mixed-signal functionality in a compact package (vs C8051F814-GU)

Notas de projeto

Use the 24-QSOP land pattern and pin numbering defined by the manufacturer package drawing. Place input and output capacitors adjacent to their associated pins, provide a low-impedance ground path, and route analog inputs away from digital clock and switching nets. Because the complete pin list is not shown on the product page, verify every signal against the manufacturer datasheet before releasing the PCB artwork.

Keep the ADC input, DAC output, comparator input, and temperature-sensor circuitry away from high-current switching paths and inductive components. Use a continuous ground reference beneath analog signals when the package and board construction permit it, and terminate unused inputs according to the manufacturer's recommendations. Separate analog filtering from MCU routing where the operating frequency and source impedance make coupling significant.

Do not treat a shared package name as proof that firmware and peripherals are interchangeable. Compare ADC channels, DAC availability, comparator behavior, touch resources, programming pins, reset requirements, and electrical limits between the C8051F806-GU and any proposed family alternative. Recheck startup, clock configuration, and conversion-settling sequences in firmware, especially when replacing an operating design.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance status for the exact C8051F806-GU suffix was not identified. AEC-Q100 is not applicable because this product is a general-purpose microcontroller rather than an automotive-qualified device.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

C8051F806-GU datasheet C8051F806-GU pinout C8051F806-GU datasheet pdf C8051F806-GU equivalent C8051F806-GU replacement C8051F806-GU cross reference C8051F806-GU vs C8051F802-GU C8051F806-GU footprint C8051F806-GU price C8051F806-GU stock Silicon Labs C8051F806-GU C8051F806-GU capacitive touch C8051F806-GU application circuit

Componentes & termos relacionados

Silicon Labs C8051F806-GU C8051F802-GU C8051F814-GU C8051F800-GU 8-bit microcontroller mixed-signal MCU 8051-compatible core CISC microcontroller embedded microcontroller semiconductor Flash program memory capacitive touch ADC DAC comparator on-chip temperature sensor 25 MHz clock 1.8 V to 3.6 V power supply 24-QSOP package QSOP package family surface-mount package in-system programming embedded control sensor interface
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ