onsemi

CD4051BCM - 8:1 240Ohm Analog Switch | onsemi | Multiplexer

MPN: CD4051BCM ✓ सक्रिय
18 VDC Vdss Very low Id 16-SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

CD4051BCM अवलोकन

The onsemi CD4051BCM is a single 8-channel analog multiplexer and demultiplexer with an 8:1 circuit configuration, 240-ohm on-state impedance, and a 16-SOIC package. It is a digitally controlled analog switch designed to route one of eight common or individual analog channels to a common output, or route a common input to one selected channel. The device provides low ON impedance and very low OFF leakage current.

An analog multiplexer is a semiconductor switching device that connects multiple signal paths to a shared resource. The broader hierarchy is analog switch, multiplexer or demultiplexer, interface IC, and semiconductor. This topology reduces the number of external pins and interconnects required when a controller must measure multiple analog inputs or distribute an analog signal among several destinations.

The CD4051BCM includes three digital control inputs for channel selection and one inhibit or disable input. Its digital control architecture allows a microcontroller or logic system to select the desired analog path. The principal channel characteristics identified for this device are its 240-ohm ON impedance and very low OFF leakage current, which are important when selecting it for sensor acquisition, signal routing, or precision analog measurement.

The CD4051BCM belongs to the CD4000 CMOS logic family and can operate as either an 8-channel multiplexer or an 8-channel demultiplexer, depending on how the common and individual channel terminals are connected. The 16-SOIC package supports conventional surface-mount assembly, while the device's principal application role remains the selection of one analog signal path from a group of eight.

Typical uses include multiplexed sensor interfaces, laboratory and test equipment, industrial control systems, data acquisition modules, and audio signal routing. It is particularly relevant when eight analog inputs must be presented to a single converter or processor without requiring a separate switch for every input. System designers should still evaluate signal range, switching speed, charge injection, and operating-voltage limits against the application.

For PCB design, keep the selected analog channel traces short and place the device close to the multiplexer output when possible. Route control inputs away from sensitive analog nets, use a solid ground reference, and follow the manufacturer datasheet for decoupling and unused-pin handling. Avoid presenting the logic selects as sufficient protection against excessive input or output voltage.

This page combines the verified product identity, a parameter-focused comparison, practical routing guidance, and carefully qualified replacement information. It distinguishes electrically similar devices from confirmed drop-in choices so engineers can evaluate footprint, control logic, signal integrity, and operating conditions before redesigning a board.

के लिए ड्रॉप-इन विकल्प CD4051BCM — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

MC74HC4051ADR2G

✅ ड्रॉप-इन
📦 16-SOIC
HC-family logic levels and timing may differ from the CD4000-family CD4051BCM; available comparison material identifies the part but does not quantify every difference

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

CD4051BCM Maximum Ratings और Electrical Characteristics

Circuit Count 1 circuit
Multiplexer Configuration 8:1
Channel Count 8 channels
On-State Impedance 240 ohm
Off-State Leakage Current Very low
Device Type Single 8-channel analog multiplexer/demultiplexer
Control Type Digitally controlled
पिन की संख्या 16 pins
पैकेज 16-SOIC
माउंटिंग प्रकार Surface mount
Storage Temperature Range -65 °C to +150 °C
Maximum Power Dissipation 700 mW
Maximum DC Supply Voltage 18 VDC
Technology Family CD4000 CMOS logic

CD4051BCM 16-soic पिन कॉन्फ़िगरेशन गाइड

CD4051BCM (16-soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

CD4051BCM के लिए 16-soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: CD4051BCM.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

CD4051BCM के लिए उपयुक्त है 6 अनुप्रयोगs: Multiplexed Sensor Acquisition, Industrial Control Signal Routing, Data Acquisition Modules, Test and Measurement Systems, Audio Signal Routing, Communication and Instrumentation Interfaces.

🧩

Multiplexed Sensor Acquisition

The CD4051BCM suits systems that must route one of eight analog sensor outputs into a shared converter or processor channel. Its 8:1 configuration reduces the number of analog connections required at the host device, while the 240-ohm ON impedance establishes the basic loading requirement for the selected source. Place the multiplexer near the sensor or converter interface to minimize additional trace resistance and capacitance. Verify that sensor output voltage, source impedance, acquisition time, and leakage current remain acceptable. The three select inputs can be driven by a microcontroller or logic decoder, but their levels and switching behavior must match the CD4051BCM control truth table.

🏭

Industrial Control Signal Routing

The CD4051BCM can route eight analog control or measurement channels through one common interface in industrial equipment. Its low ON impedance of 240 ohms is suitable when the receiving circuit has sufficiently high input impedance, while very low OFF leakage current helps isolate unselected channels. Keep the selected signal path away from digital clock and control routing to reduce coupling. Confirm the operating supply range and temperature rating for the installation environment. The common terminal should connect to the downstream measurement block, and each individual terminal should present a defined state when its channel is not selected.

📡

Data Acquisition Modules

In a compact data-acquisition module, the CD4051BCM provides an efficient way to share one analog input channel among eight sources. Its single 8-channel structure supports both multiplexing and demultiplexing, depending on the external connection arrangement. This can reduce connector count and PCB routing complexity when several slow-changing measurements share one converter. Account for the 240-ohm series resistance when calculating source-loading error, and validate settling time before sampling. The mux should be positioned close to the converter input when the selected signal has a high source impedance or when cable capacitance could slow settling.

🔧

Test and Measurement Systems

The CD4051BCM can distribute or select one analog signal among eight destinations in a test fixture or measurement system. Its low OFF leakage current reduces interaction between unselected paths, and the 240-ohm ON impedance supports many high-impedance measurement circuits. Use a defined termination or bias arrangement for every unselected input to prevent floating nodes from introducing noise. Select controls should change only after the previous measurement has settled. Confirm signal amplitude, source impedance, and operating voltage against the datasheet limits before using the device with external test equipment.

🎧

Audio Signal Routing

The CD4051BCM may be used for low-bandwidth audio routing when its 240-ohm ON impedance and OFF leakage characteristics are acceptable for the selected path. It is particularly relevant to compact analog selectors that must connect one source to one of several outputs or choose between multiple audio inputs. Keep the audio trace short and provide a stable return path to minimize pickup. The digital selection lines should be driven cleanly and routed away from the audio path. Evaluate channel distortion, attenuation, switching transients, and input bias behavior in the finished circuit because those application-level characteristics depend on the surrounding network.

🌐

Communication and Instrumentation Interfaces

The CD4051BCM can select among eight external instrumentation lines in communication equipment or diagnostic interfaces. It provides a practical way to connect multiple analog sources to one processing channel without adding a dedicated package for each source. Place protection components before the mux when the selected lines connect to external connectors, because the device is intended for controlled signal conditions. Use a continuous ground reference and separate return currents from sensitive analog paths. Validate OFF-channel isolation, common-mode behavior, and settling time for the interface bandwidth. The channel-select logic should remain stable during conversion or measurement to avoid switching artifacts.

अनुशंसित उत्पादों का सारांश

CD4051BCM onsemi उपयोग में: Multiplexed Sensor Acquisition, Industrial Control Signal Routing, Data Acquisition Modules, Test and Measurement Systems, Audio Signal Routing, Communication and Instrumentation Interfaces MC74HC4051ADR2G comparison candidate for 8-channel routing उपयोग में: Multiplexed Sensor Acquisition, Industrial Control Signal Routing, Data Acquisition Modules, Test and Measurement Systems, Audio Signal Routing, Communication and Instrumentation Interfaces
What is the onsemi CD4051BCM?
The onsemi CD4051BCM is a single 8-channel analog multiplexer and demultiplexer with an 8:1 configuration and 240-ohm ON impedance in a 16-SOIC package. According to the CD4051BCM manufacturer datasheet, it is a digitally controlled analog switch with low ON impedance and very low OFF leakage current. It can route one of eight individual analog channels to a common terminal or reverse that routing for demultiplexer operation.
What is the operating voltage of the CD4051BCM?
The CD4051BCM supports a maximum DC supply voltage of 18 VDC, as stated in the manufacturer datasheet absolute-maximum ratings. The permitted operating supply range and signal-voltage limits must be taken from the datasheet electrical-characteristics table before design use. Absolute-maximum values describe conditions that must not be exceeded; they are not recommended operating points.
Where can I download the CD4051BCM datasheet PDF?
The CD4051BCM datasheet PDF is available through the onsemi datasheet page at https://www.datasheets.com/onsemi/cd4051bcm. The manufacturer datasheet is the preferred document for the pin configuration, absolute-maximum ratings, electrical characteristics, operating limits, and application guidance. Use its pin-description table when assigning PCB tracks and verify supply and signal limits before implementation.
Where can I find the CD4051BCM pinout?
The CD4051BCM pinout is defined in the pin-configuration section of the manufacturer datasheet. It is a 16-SOIC device, and the package drawing identifies the individual channel, common-channel, control, inhibit, supply, and ground terminals. Use the datasheet diagram rather than inferring connections from another CD4000-series device, because selection and inhibit functions must be wired according to the truth table.
How do the CD4051BCM select and disable channels?
The CD4051BCM uses three digital select inputs to choose among eight analog channels, while an inhibit input provides a common disable function. The CD4051BCM manufacturer datasheet contains the channel-selection truth table and specifies the active logic levels. Confirm those levels against the controlling logic and verify the analog signal remains within the device's rated input and output range.
Is the CD4051BCM suitable for multiplexed sensor measurement?
Yes, the CD4051BCM is suitable for multiplexed analog measurement when its 240-ohm ON impedance, very low OFF leakage current, and supply limits meet the sensor system requirements. Place the multiplexer near the source or converter to minimize routed capacitance and resistance. Confirm input bias current, settling behavior, channel-to-channel isolation, and acquisition time in the complete signal chain.
What is the difference between multiplexing and demultiplexing with the CD4051BCM?
Multiplexing connects one of eight individual analog inputs to the common output, while demultiplexing routes the common input toward a selected individual output. Both operating directions use the same eight-channel switching structure and the same three digital selection inputs. According to the manufacturer datasheet, the distinction is determined by how the common and individual terminals are connected in the application.
What is the best drop-in replacement for the CD4051BCM?
The MC74HC4051ADR2G is the only specifically identified candidate in the available comparison material for possible replacement of the CD4051BCM. Because the available material does not establish every operating limit, control level, timing characteristic, and footprint detail, it should not be treated as an unconditional drop-in without a complete manufacturer comparison. Confirm pinout, voltage range, logic thresholds, ON resistance, leakage, and switching speed before substitution.
Can MC74HC4051ADR2G replace CD4051BCM?
The MC74HC4051ADR2G may be considered as a replacement candidate because it is identified in a comparison against the CD4051BCM, but the available information does not prove unconditional drop-in compatibility. Its manufacturer datasheet must be checked against the CD4051BCM datasheet for 16-SOIC pinout, supply range, logic thresholds, channel order, inhibit behavior, ON resistance, leakage, and timing. Request a quote for either exact MPN through the form on this page.
CD4051BCM vs MC74HC4051ADR2G: which is better for low-voltage designs?
The better choice between CD4051BCM and MC74HC4051ADR2G depends on the complete control and analog requirements. The CD4051BCM is identified as a CD4000 CMOS 8-channel multiplexer with 240-ohm ON impedance, while the MC74HC4051ADR2G belongs to a different logic family. Compare supply voltage, logic thresholds, timing, leakage, ON resistance, and channel truth tables before selecting the device for a low-voltage system.
When should I choose the CD4051BCM instead of another 8-channel analog switch?
Choose the CD4051BCM when an established CD4000-family interface, 8:1 routing, 240-ohm ON impedance, and 16-SOIC implementation meet the design requirements. Select another device instead when the application needs a different logic family, lower ON resistance, faster switching, narrower supply range, different channel truth table, or a different qualified package. The final choice should follow the signal, control, and environmental requirements.
Is the CD4051BCM suitable for industrial control and data acquisition?
The CD4051BCM can be used in industrial control and data-acquisition systems when its channel count, 240-ohm ON impedance, low OFF leakage current, supply range, and temperature rating satisfy the operating environment. Consider input protection, settling time, common-mode range, grounding, and connector isolation around the mux. Request the current lifecycle, stock, and lead-time status through the Request a Quote form on this page.
Where can I buy CD4051BCM and check its current lead time?
Use the Request a Quote form on this page to request CD4051BCM availability, current lead time, and a quotation for the exact 16-SOIC part. The available distributor listings confirm the exact MPN and describe it as a 1-circuit, 8:1, 240-ohm switch IC in a 16-SOIC package, but they do not provide a quote-ready quantity-break table. The manufacturer lists no universal stock guarantee for every order quantity.
What is the price of CD4051BCM?
The current CD4051BCM price depends on order quantity, package suffix, and purchasing conditions. The available listings confirm the exact 16-SOIC part but do not publish qualifying quantity-break prices that can be reproduced as structured pricing. Submit the Request a Quote form on this page with your quantity and target date for a current quotation rather than relying on an unverified historical price.
Is CD4051BCM in stock?
CD4051BCM availability can change with manufacturer inventory and distributor replenishment, so stock should be confirmed for the current order quantity. The available product listings identify CD4051BCM and provide purchasing links, but a guaranteed quantity-ready stock statement is not established. Use the Request a Quote form on this page to request the current availability and lead time for the exact MPN.
What are the key specifications of CD4051BCM that engineers should know?
The key CD4051BCM specifications are one 8-channel switching circuit, 8:1 multiplexing, 240-ohm ON impedance, very low OFF leakage current, digital channel selection, and a 16-SOIC package. According to the manufacturer datasheet, the maximum DC supply voltage is 18 VDC and the listed storage range is -65 °C to +150 °C. Operating supply, timing, and temperature ratings must also be confirmed from the datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा CD4051BCM — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the CD4051BCM when the design needs an established CD4000-family 8-channel analog multiplexer or demultiplexer, accepts a 240-ohm ON impedance, and can use the 16-SOIC footprint. It is appropriate for multiplexing sensor outputs, sharing one analog-converter input, or distributing a signal among eight destinations when signal settling and channel isolation meet the application requirements. Consider MC74HC4051ADR2G when its HC-family logic interface is preferred or when its manufacturer specifications provide a closer electrical match. Do not substitute it solely because both parts perform 8-channel multiplexing: verify pin assignment, supply range, select and inhibit truth tables, logic thresholds, timing, ON resistance, OFF leakage, temperature rating, and absolute-maximum ratings. Choose a different switch if the application requires lower resistance, faster transitions, a different package, or bipolar signal handling beyond the rated CD4051BCM operating conditions.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC74HC4051ADR2G
Package 16-SOIC 16-SOIC
Brand onsemi onsemi
Logic Family CD4000 CMOS HC CMOS

मुख्य विशेषताएँ

  • Established CD4000-family 8:1 switching arrangement (बनामMC74HC4051ADR2G)
  • Very low OFF leakage for unselected analog paths (बनामMC74HC4051ADR2G)
  • Single package handles eight analog channels (बनामMC74HC4051ADR2G)

डिज़ाइन नोट्स

Place the CD4051BCM close to the shared analog destination when the source impedance is high or the selected signal must settle quickly. Keep individual-channel and common-terminal traces short, provide a continuous ground reference, and keep the three digital select lines away from sensitive analog nets. Where possible, route the unselected channels toward defined impedances or terminations rather than allowing unused board inputs to float.

Include the 240-ohm ON impedance in the complete signal-path error budget. For a high-impedance receiving circuit this resistance is usually manageable, but it becomes more important with lower source impedance, long cables, high-frequency signals, or precision measurements. Check that the downstream input impedance does not create unacceptable attenuation and verify settling time after each channel change before sampling the converted value.

Do not treat the 18-VDC maximum DC supply rating as a general operating limit. Review the datasheet operating supply range, control-input thresholds, analog signal limits, and absolute-maximum conditions before power-up. Keep the inhibit and select inputs at valid logic levels whenever the analog path is active, and ensure external signals cannot exceed the device's permitted input or output voltage.

Follow the manufacturer datasheet for supply decoupling and unused-pin treatment. Provide a low-impedance ground connection and place any required bypass capacitor adjacent to the device. Because the CD4051BCM handles analog signals, give the common and selected channels a quiet return path and keep switching-node currents out of the sensitive signal reference. Review creepage, clearance, and connector protection when the mux is used with external equipment.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance status is not established by the available product listings. The complete ordering information, material declarations, and manufacturer product documentation should be checked before a regulated design is released.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

CD4051BCM CD4051BCM datasheet CD4051BCM datasheet pdf CD4051BCM pinout CD4051BCM 8:1 multiplexer CD4051BCM 240 ohm switch onsemi CD4051BCM CD4051BCM equivalent CD4051BCM replacement CD4051BCM vs MC74HC4051ADR2G CD4051BCM application circuit CD4051BCM price CD4051BCM stock CD4051BCM SOIC-16 footprint

संबंधित कंपोनेंट्स और शब्द

onsemi CD4051BCM MC74HC4051ADR2G analog switch analog multiplexer analog demultiplexer interface IC semiconductor CD4000 CMOS logic HC CMOS logic 8:1 multiplexer 8-channel analog switch 240-ohm ON impedance OFF leakage current channel selection inhibit input 16-SOIC SOIC package family surface-mount package sensor acquisition data acquisition industrial control test and measurement audio signal routing
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें