अंतिम बार खरीदने की सूचना: CD4518BF3 end-of-life के करीब है। अंतिम ऑर्डर तिथि: हमसे संपर्क करें. उपलब्ध वैकल्पिक पार्ट्स देखें →
Harris Corporation

CD4518BF3 Dual BCD Up-Counter, 16-CDIP | Harris

MPN: CD4518BF3 ⚠ अंतिम खरीद
3 V to 18 V Vdss 1 uA at 18 V Id 16-CDIP, 0.300-inch (7.62 mm) pitch Package 6 MHz at 10 V Speed
न्यूनतम ऑर्डर मात्रा: 1 |

CD4518BF3 अवलोकन

The Harris Corporation CD4518BF3 is a dual CMOS BCD up-counter operating from 3 V to 18 V, with a typical clock frequency of 6 MHz at 10 V. The device is packaged in a 16-pin ceramic dual in-line package (CDIP) and provides positive- or negative-edge triggering, synchronous internal carry propagation, and independent decade and binary counting modes for each counter. Each half of the device includes separate clock, reset, and count inputs, while the two counters can operate independently or together as an 8-bit cascaded counter.

A BCD counter is a digital counter that represents decimal digits using a four-bit binary-coded decimal output. The dual counter belongs to the broader CMOS logic hierarchy: counter IC, logic IC, digital integrated circuit, and semiconductor. The CD4518 is useful when a design must count decimal events, divide an input frequency, sequence industrial equipment, or generate multi-digit numerical displays without requiring a microcontroller.

Key operating features include medium-speed operation, a typical 6 MHz clock at a 10 V supply, selectable positive- or negative-edge triggering, and synchronous internal carry propagation. The dual architecture supports two independent 4-bit counters in decimal mode or two 4-bit binary counters. Its broad supply range allows operation from 3 V through 18 V, making it suitable for both 5 V and higher-voltage industrial logic systems when signal and input tolerances are checked carefully.

The CD4518BF3 uses CMOS construction to provide low quiescent current and wide operating-voltage capability. Its maximum input current is specified as 1 uA at 18 V, and the device is 100% tested for quiescent current at 20 V over the full package-temperature range. As a legacy ceramic-DIP device, it offers a robust through-hole construction for industrial, laboratory, educational, and maintenance applications rather than a compact surface-mount footprint.

Typical uses include decade counters for panel meters, frequency dividers in timing circuits, programmable sequence controllers, digital time-base modules, and two-digit event counters. Two CD4518 packages can also form an eight-bit cascaded counter when the carry output of the first device clocks the second. Designers should treat all unused CMOS inputs as active logic states and observe the manufacturer's truth table for reset and count-trigger behavior.

For reliable operation, connect the reset inputs to a defined logic level and do not allow unused inputs to float. Decoupling should follow the manufacturer datasheet's recommended supply arrangement, while external clock and reset traces should be kept short and protected from switching-node coupling. The ceramic DIP package permits straightforward breadboard and through-hole construction, but its 0.300-inch, 7.62 mm pin pitch requires a compatible footprint and adequate board spacing.

This product page combines the CD4518BF3 electrical characteristics, pin configuration, verified family references, compatible counter alternatives, comparison parameters, and practical implementation guidance to support component selection, schematic review, PCB footprint confirmation, and legacy-system maintenance.

के लिए ड्रॉप-इन विकल्प CD4518BF3 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं CD4518BF3 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Logic Family, Clock Edge Selection, Carry Propagation, Maximum Input Current, Operating Temperature Range.

Texas Instruments
Logic Family: CMOS CD4000 series
Clock Edge Selection: Positive or negative edge
Operating Temperature Range: -55 C to +125 C
इसके साथ तुलना करें CD4518BF3 →
Texas Instruments
Logic Family: CD4000B CMOS
Clock Edge Selection: Positive or negative edge
Carry Propagation: Synchronous internal propagation
इसके साथ तुलना करें CD4518BF3 →

CD4518BE

✅ ड्रॉप-इन
Texas Instruments
📦 16-PDIP
Dual BCD up-counter · CMOS CD4000 series · 2 sections · 4 bits · 4 stages per section · Binary-coded decimal (BCD) · 8 MHz · 3 V to 18 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC14518B

✅ ड्रॉप-इन
📦 16-DIP
Equivalent dual 4518 BCD up-counter in a 16-pin DIP; electrical and environmental limits may differ by manufacturer revision.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

CD4518BF3A

✅ ड्रॉप-इन
📦 16-CDIP
Same CD4518BF function in a 16-CDIP ceramic-DIP configuration; the A suffix identifies a distinct ordering configuration whose temperature and qualification details need confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

HCF4518B

✅ ड्रॉप-इन
📦 16-DIP
Identified as an equivalent 4518 CMOS counter with the same 16-pin DIP form factor; manufacturer-specific voltage, timing, and temperature limits require comparison.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

HEF4518B

✅ ड्रॉप-इन
📦 16-DIP
Identified as an equivalent 4518 CMOS counter in a 16-pin DIP; supply limits and propagation timing should be verified against the CD4518BF3.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

CD4518BF3 Maximum Ratings और Electrical Characteristics

Product Type Dual BCD up-counter
Number of Counters 2 counters
Counter Resolution 4 bits per counter
Counting Modes BCD decimal or binary
Supply Voltage Range 3 V to 18 V
Typical Clock Frequency 6 MHz at 10 V
Clock Edge Selection Positive- or negative-edge triggering
Carry Propagation Synchronous internal
Maximum Input Current 1 uA at 18 V
Quiescent Current Test 100% tested at 20 V over full package-temperature range
Logic Family CMOS
पैकेज 16-CDIP, 0.300-inch (7.62 mm) pitch
माउंटिंग प्रकार Through-hole
पिन काउंट 16 pins
आउटपुट कॉन्फ़िगरेशन Dual 4-bit BCD/binary counter outputs

CD4518BF3 16-cdip, 0.300-inch (7.62 mm) pitch पिन कॉन्फ़िगरेशन गाइड

CD4518BF3 (16-cdip, 0.300-inch (7.62 mm) pitch पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

CD4518BF3 के लिए 16-cdip, 0.300-inch (7.62 mm) pitch पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: CD4518BF3.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

CD4518BF3 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Digital Sequence Counter, Panel-Meter Digit Counter, Frequency Divider and Timer, Laboratory Counter and Pulse-Counter, Two-Digit Event Display, Legacy Control and Automation Module.

🏭

Industrial Digital Sequence Counter

The CD4518BF3 is suitable for industrial sequence counting because it combines two independent counters, selectable BCD or binary modes, and a 3 V to 18 V supply range. One section can count machine events while the other tracks a second process stage, eliminating the need for two separate counter packages. The 16-CDIP construction supports through-hole assembly and repair. At 10 V, the family is specified for a typical 6 MHz clock, allowing operation above simple event-rate counting when timing margins are verified. Use defined reset levels, avoid floating CMOS inputs, and route clock and reset lines away from high-current switching nodes.

📺

Panel-Meter Digit Counter

The CD4518BF3 can form the counting stage of a decimal panel display because each half operates as a 4-bit BCD up-counter. Two sections permit separate decade digits, while cascaded operation can extend the count range. The BCD outputs reduce the logic required to decode decimal values and drive display-oriented circuitry. A 3 V to 18 V operating range permits integration into legacy industrial instruments operating near 5 V or at higher logic levels. The 16-CDIP package is easy to socket for maintenance, although designers should check LED or display drive currents and keep the counter supply adequately decoupled.

⏱️

Frequency Divider and Timer

The CD4518BF3 is appropriate for frequency division and time-base generation because it supports both decimal and binary counting, selectable clock-edge triggering, and synchronous carry propagation. The manufacturer CD4518B family reaches a typical 6 MHz clock at 10 V, providing substantial margin for dividing lower-frequency timing inputs into slower system clocks. Configure the mode-control inputs from the four count outputs to establish the divide ratio, then cascade a second package when additional division is required. Confirm switching times across voltage and temperature before using the typical clock figure as a guaranteed system limit.

🔧

Laboratory Counter and Pulse-Counter

The CD4518BF3 works well as the core of a laboratory pulse-counter because two independent counter sections can monitor separate inputs without duplicating counter circuitry. Positive- or negative-edge triggering allows selection of the desired response to input transitions, while BCD mode simplifies decimal readout. The 16-CDIP package is convenient for breadboards and legacy educational or service equipment, and its 3 V minimum supply supports operation from a 5 V laboratory rail. A ceramic DIP package adds mechanical robustness, but reset inputs should still be debounced or controlled so switch bounce does not create unintended counts.

🖥️

Two-Digit Event Display

The CD4518BF3 can count and retain two decimal digits for event displays, product counters, and batch-counting systems. Each 4-bit BCD section represents one decade, and the sections may be advanced independently or cascaded. The family operates from 3 V to 18 V, allowing use in legacy 5 V instrumentation as well as higher-voltage industrial logic where appropriate. Synchronous internal carry propagation helps define when the high-order digit advances. The ceramic DIP footprint requires a 0.300-inch, 7.62 mm pitch layout, and designers should account for output loading when adding display drivers or logic decoders.

⚡

Legacy Control and Automation Module

The CD4518BF3 can serve as a compact state-counting element in legacy industrial controls, particularly where a 16-pin through-hole footprint and wide supply range simplify retrofit work. Two counters can track separate steps, count retries, or implement a multi-stage timing sequence without adding a microcontroller. The device's CMOS inputs require valid logic levels, so unused terminals must not float and long wiring should be shielded from inductive or switching interference. Its 6 MHz typical clock at 10 V supports moderately fast event processing, but thermal, timing, and reset behavior must be checked against the original control system requirements.

अनुशंसित उत्पादों का सारांश

CD4518BE Texas Instruments उपयोग में: Industrial Digital Sequence Counter, Panel-Meter Digit Counter, Laboratory Counter and Pulse-Counter, Two-Digit Event Display, Legacy Control and Automation Module MC14518B Pin-compatible dual 4518-family counter उपयोग में: Industrial Digital Sequence Counter, Laboratory Counter and Pulse-Counter CD4518BF3A CD4518BF-family ceramic-DIP counter option उपयोग में: Panel-Meter Digit Counter, Two-Digit Event Display HCF4518B Equivalent CMOS counter for through-hole timing modules उपयोग में: Frequency Divider and Timer, Legacy Control and Automation Module HEF4518B 4518-family counter for cascaded frequency division उपयोग में: Frequency Divider and Timer, Legacy Control and Automation Module
What is the CD4518BF3?
The CD4518BF3 is a dual CMOS BCD up-counter with two independent 4-bit counters, positive- or negative-edge triggering, and synchronous internal carry propagation. According to the manufacturer CD4518B family datasheet, the device supports both decade and binary counting modes across a 3 V to 18 V supply range and is specified in a 16-pin ceramic DIP package. It is suitable for decimal event counting, frequency division, sequencing, and cascaded eight-bit counting systems.
What is the operating voltage of CD4518BF3?
The CD4518BF3 operates from 3 V to 18 V. The manufacturer CD4518B datasheet identifies a typical clock frequency of 6 MHz at a 10 V supply, illustrating the device's medium-speed CMOS operation. Actual timing margin depends on supply voltage, temperature, output loading, and clock transition rates, so the application should use the worst-case operating conditions when calculating counter throughput.
Where can I download the CD4518BF3 datasheet PDF?
The official CD4518B family documentation is available through the Texas Instruments product page at https://www.ti.com/product/CD4518B, and a PDF-indexed copy appears in the manufacturer-datasheet listing at https://www.alldatasheet.com/datasheet-pdf/pdf/2191380/TI2/CD4518BF.html. Use the pin-description table and switching-characteristics tables to assign the CD4518BF3's 16 ceramic-DIP connections and verify operating limits before layout release.
Where can I find the CD4518BF3 pinout?
The CD4518BF3 uses a 16-pin ceramic DIP arrangement with a 0.300-inch, 7.62 mm pin pitch. Use the manufacturer CD4518B datasheet pin-description table to identify the clock, reset, mode-control, carry, and four parallel-output terminals for each counter. The public snippets establish the device and package but do not reproduce every terminal name, so do not infer an individual pin function from the family description alone.
Can CD4518BF3 count in both BCD and binary modes?
Yes. The CD4518BF3 can operate each 4-bit counter as a decade BCD counter or as a binary counter through its mode-control inputs. The manufacturer CD4518B family datasheet describes the same internal device as a dual BCD up-counter with selectable counting behavior. Confirm the mode-control truth table and reset requirements in the datasheet because incorrect logic states can force a counter away from its intended sequence.
What clock frequency can CD4518BF3 handle?
The CD4518BF3 has a typical operating clock frequency of 6 MHz at 10 V. The manufacturer CD4518B datasheet lists medium-speed operation and supports positive- or negative-edge triggering. This is a typical value rather than a guarantee for every voltage, temperature, and load condition, so high-speed designs should use the datasheet's switching tables and allow margin for clock rise time and propagation delay.
How do I cascade two CD4518BF3 devices?
Two CD4518BF3 devices can form an eight-bit cascaded counter by using one device's carry output to drive the second device's clock input. Keep the two counters in the same decimal or binary mode and connect each reset input so both sections begin from a defined state. The CD4518B family provides synchronous internal carry propagation, which helps define the relationship between the low-order and high-order count stages.
Where can I buy CD4518BF3 online?
Use the Request a Quote form on this page to request CD4518BF3 availability, lot handling, and a current quotation. The exact target is a legacy 16-CDIP Harris Corporation device, so package condition, ceramic-package construction, test traceability, and quantity requirements should be stated with the request. The manufacturer family page at https://www.ti.com/product/CD4518B remains the authoritative source for technical documentation.
What is the price of CD4518BF3?
Current commercial pricing for the exact CD4518BF3 is obtained through the Request a Quote form on this page. Because CD4518BF3 is a legacy ceramic-DIP part, the request should identify the required package, quantity, traceability needs, and acceptable delivery schedule. The structured pricing fields should be used for any displayed commercial data, while the manufacturer CD4518B product page remains the source for technical selection.
Is CD4518BF3 in stock and what is the lead time?
Current CD4518BF3 stock and lead time should be confirmed through the Request a Quote form on this page. The part is a legacy Harris Corporation 16-CDIP device, so availability can vary with remaining factory inventory, inspection requirements, and order volume. Include the required quantity and target date in the request to obtain a meaningful supply commitment rather than relying on a generic catalog-stock statement.
What can replace CD4518BF3?
The CD4518BE and MC14518B are pin-compatible 4518-family alternatives for designs that use a 16-pin through-hole footprint. The CD4518BF3A is another identified 4518-family option, although its package and qualification details should be checked before substitution. A replacement must match the 16-pin pinout, counting mode controls, supply voltage, clock-edge behavior, and environmental requirements rather than relying only on the 4518 family name.
Is CD4518BE the same as CD4518BF3?
The CD4518BE implements the same dual CMOS BCD-counter function in a 16-PDIP package and is the closest identified pin-compatible alternative. The CD4518BF3 is the ceramic-DIP CD4518BF3 configuration, while CD4518BE carries a different package suffix. Before replacing one with the other, verify the exact pin assignments, operating-temperature grade, package dimensions, and any qualification requirements in the relevant manufacturer datasheet.
CD4518BF3 vs CD4518BE — which is better for a new design?
The CD4518BF3 is preferable when an existing design specifically requires the legacy 16-CDIP Harris Corporation device and its exact qualification history. The CD4518BE is preferable for a new through-hole design when a currently cataloged plastic DIP implementation is acceptable and offers simpler sourcing. Both perform the dual 4518 BCD-counter function, but package construction, lifecycle status, temperature grade, and documentation should determine the final choice.
When should I choose CD4518BF3 instead of CD4518BE?
Choose CD4518BF3 when maintaining an existing assembly requires the specific legacy ceramic-DIP qualification, mechanical fit, or documented electrical behavior of that part. Choose CD4518BE for a new 16-pin through-hole design when its current lifecycle status and environmental ratings are preferable. Both devices must be checked against the same logic truth table, 3 V to 18 V supply architecture, clock timing, and footprint requirements before selection.
Is CD4518BF3 suitable for a frequency divider?
The CD4518BF3 is suitable for frequency division because it provides two counters, BCD or binary operating modes, and positive- or negative-edge triggering. For divide-by-N use, connect the relevant count outputs to the mode-control inputs according to the manufacturer truth table. The 6 MHz typical clock specification at 10 V provides a useful starting point, but final divider bandwidth must be checked across supply and temperature extremes.
What are the key specifications of CD4518BF3 that engineers should know?
The key CD4518BF3 specifications are a 3 V to 18 V supply range, two 4-bit counters, BCD or binary modes, positive- or negative-edge triggering, synchronous internal carry propagation, and a typical 6 MHz clock at 10 V. The manufacturer CD4518B datasheet also specifies a maximum input current of 1 uA at 18 V and 100% quiescent-current testing at 20 V. The physical device is a 16-pin ceramic DIP with a 0.300-inch pitch.

के लिए इंजीनियरिंग संदर्भ डेटा CD4518BF3 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the CD4518BF3 when maintaining or reproducing an existing 16-CDIP assembly that specifically calls for the Harris Corporation ceramic-DIP configuration. Its documented 3 V to 18 V operating range, two independent counters, BCD or binary modes, and 6 MHz typical clock at 10 V make it appropriate for legacy event counting, frequency division, and decimal sequencing. Choose CD4518BE for a new 16-PDIP design when a currently documented plastic-DIP implementation is preferable, or MC14518B, HCF4518B, and HEF4518B when an equivalent 4518-family source is acceptable. For every alternative, verify pin assignments, counting-mode truth table, supply limits, propagation delays, operating-temperature grade, and package dimensions. Do not use family equivalence as a substitute for a full timing and environmental comparison.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद CD4518BE MC14518B CD4518BF3A HCF4518B HEF4518B
Package 16-CDIP 16-PDIP 16-DIP 16-CDIP 16-DIP 16-DIP
Brand Harris Corporation Texas Instruments Motorola Texas Instruments STMicroelectronics NXP Semiconductors
Counter Type Dual BCD up-counter Dual BCD up-counter Equivalent dual 4518 BCD up-counter Dual BCD up-counter Equivalent 4518 CMOS counter Equivalent 4518 CMOS counter
Number of Counters 2 2 2 2 2 2
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

मुख्य विशेषताएँ

  • Legacy ceramic-DIP construction for established through-hole assemblies (बनामCD4518BE)
  • Exact target-family configuration with a 6 MHz typical clock at 10 V (बनामMC14518B)
  • Broad 3 V to 18 V supply operation for legacy instrumentation (बनामCD4518BF3A)

डिज़ाइन नोट्स

Do not leave unused CMOS inputs floating. Tie each unused clock, reset, and mode-control terminal to a valid inactive logic level so input leakage, coupling, and supply noise cannot create false transitions. Confirm the reset truth table before connecting external switches; a slow or noisy reset release may cause repeated or asynchronous count behavior. Use a defined pull-down or pull-up arrangement appropriate to the active state shown in the manufacturer datasheet.

The CD4518BF3 occupies a 16-pin, 0.300-inch, 7.62 mm pitch footprint. Confirm ceramic-DIP body width, row spacing, and drill size against the physical device before releasing artwork. Place the device away from high-current switching stages and route clock and reset traces as short nets. If the board also contains a CD4518BE plastic-DIP alternative, verify that the package body and drill geometry remain acceptable for the assembled board rather than checking pin count alone.

Supply decoupling must be located close to the CD4518BF3 power and ground terminals. Apply the manufacturer datasheet's recommended bypass capacitance and keep the ground return short to reduce clock-edge current in the supply rails. The family operates from 3 V to 18 V, but output rise time and maximum clock rate vary with supply voltage, so use the lowest valid supply only when its corresponding timing characteristics satisfy the design requirement.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The CD4518BF3 is a legacy Harris Corporation ceramic-DIP logic IC. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact device.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

CD4518BF3 datasheet CD4518BF3 pinout CD4518BF3 datasheet pdf CD4518BF3 equivalent CD4518BF3 replacement CD4518BF3 cross reference CD4518BF3 vs CD4518BE CD4518BF3 16-CDIP footprint Harris CD4518BF3 CD4518BF3 BCD counter CD4518BF3 frequency divider CD4518BF3 price CD4518BF3 stock CD4518BF3 application circuit

संबंधित कंपोनेंट्स और शब्द

Harris Corporation CD4518BF3 CD4518B CD4518BE CD4518BF3A MC14518B HCF4518B HEF4518B Texas Instruments Motorola STMicroelectronics NXP Semiconductors dual BCD up-counter binary-coded decimal CMOS logic counter IC logic IC digital integrated circuit semiconductor positive-edge triggering negative-edge triggering synchronous carry propagation 16-CDIP dual in-line package through-hole mounting frequency divider industrial sequence control panel-meter counter
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें