CS4352-CZZ - 24-Bit 192kHz Stereo DAC | Cirrus Logic
MPN: CS4352-CZZ ✗ जीवन की समाप्तिCS4352-CZZ अवलोकन
A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage suitable for line-level amplification, headphone stages, powered speakers, or audio analog-to-digital converters. The CS4352 belongs to the stereo DAC hierarchy within audio converter ICs and integrates digital interface circuitry, a multi-bit delta-sigma modulator, reconstruction filtering, and output amplification into one surface-mount device.
Key features include 24-bit resolution, operation up to 192 kHz, 106 dB A-weighted dynamic range, and -93 dB total harmonic distortion plus noise. The integrated line driver is specified for 2 Vrms output, while stereo mute controls and an auto-mute function simplify signal management in consumer, professional, and automotive audio equipment. A 20-pin TSSOP package supports compact surface-mount layouts.
The device uses hardware mode control rather than a software-programmable architecture. Its serial interface is identified as SPI-compatible in distributor technical listings, while the analog section includes a stereo low-pass filter and line driver. This combination reduces the number of external signal-chain blocks required for a conventional consumer-audio reconstruction path, although external routing and output conditioning still depend on the host board.
Typical uses include powered speakers, compact stereo receivers, home-audio equipment, automotive head units, professional audio electronics, and embedded multimedia systems. The 192 kHz capability supports high-resolution PCM streams, while the 106 dB A-weighted dynamic range is appropriate for low-distortion line output stages. Software mute and auto-mute behavior can also suppress unwanted analog noise during idle or mode-transition periods.
For layout, keep the digital interface traces short, provide clean analog and digital supply rails, and place decoupling capacitors close to their associated pins. Treat the analog output as a high-value audio signal path and avoid routing it beside switching-converter nodes. Confirm the package footprint, supply rails, interface mode, output loading, and mute polarity against the manufacturer datasheet before final PCB release.
This product summary combines the CS4352-CZZ electrical characteristics, package details, lifecycle position, replacement considerations, and practical integration guidance in one engineering-focused reference. It also organizes same-footprint alternatives and application trade-offs to support faster design selection without relying on a simple distributor listing alone.
के लिए ड्रॉप-इन विकल्प CS4352-CZZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं CS4352-CZZ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Dynamic Range, Digital De-emphasis, Modulator Architecture, Mounting Type.
CS4352-DZZ
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →CS4351-CZZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
CS4350-CZZR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
CS4352-CZZR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
CS4361-CZZ
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →CS4352-CZZ Maximum Ratings और Electrical Characteristics
| Converter Type | Stereo audio digital-to-analog converter |
| रेज़ोल्यूशन | 24 bit |
| Maximum Sample Rate | 192 kHz |
| Dynamic Range | 106 dB A-weighted |
| THD+N | -93 dB |
| Integrated Line Output | 2 Vrms |
| Modulator Architecture | Multi-bit delta-sigma |
| Analog Filter | Integrated stereo low-pass filter |
| Digital Interface | SPI |
| Control Mode | Hardware mode only |
| Mute Functions | Stereo mute and auto-mute |
| Analog Supply Range | 3.13 V to 3.47 V |
| Digital Supply Range | 8.4 V to 12.6 V |
| ऑपरेटिंग तापमान | -40°C to +85°C |
| पैकेज | 20-pin TSSOP |
| माउंटिंग प्रकार | SMD surface mount |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
CS4352-CZZ 20-pin tssop पिन कॉन्फ़िगरेशन गाइड
CS4352-CZZ (20-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: CS4352-CZZ.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
CS4352-CZZ के लिए उपयुक्त है 6 अनुप्रयोगs: High-Resolution Consumer Audio, Automotive Head-Unit Audio, Professional Stereo Monitoring, Powered Speaker USB Audio, Multimedia System Audio, Digital Audio Interface and Line Output.
High-Resolution Consumer Audio
The CS4352-CZZ fits line-output stages requiring 24-bit data and sample rates up to 192 kHz because its multi-bit delta-sigma modulator supports high-resolution PCM streams. Its 106 dB A-weighted dynamic range and -93 dB THD+N provide a useful performance target for compact amplifiers, music players, and home-audio receivers. The integrated analog low-pass filter removes much of the need for external reconstruction circuitry, while the 2 Vrms line driver supplies a convenient stereo output. Designers should still verify output loading, mute timing, and analog-supply headroom against the manufacturer datasheet before fixing the analog stage.
अनुशंसित
Automotive Head-Unit Audio
The CS4352-CZZ is suitable for automotive audio line outputs because Cirrus Logic identifies the CS4352 family for automotive audio applications and reports a -40°C to +85°C operating range. The 192 kHz capability accommodates high-resolution source material, while the integrated line driver, stereo mute, and auto-mute function support controlled transitions during source changes. An automotive design must still confirm qualification documents for the exact suffix, electromagnetic requirements, supply transients, and load behavior. Use clean analog routing and local bypass capacitors to preserve the 106 dB A-weighted dynamic-range target.
अनुशंसित
Professional Stereo Monitoring
The CS4352-CZZ can serve as the stereo line-output converter in professional monitoring equipment when the design values low distortion over a compact board area. Its -93 dB THD+N, 106 dB A-weighted dynamic range, and integrated analog low-pass filter support a direct conversion path from the digital audio bus to line-level outputs. The 2 Vrms line driver simplifies balancing and gain-staging decisions, but output impedance, load, and downstream amplifier headroom must be checked before layout approval. Short analog traces and separate return paths are especially important when the converter is placed near switching power stages.
अनुशंसित
Powered Speaker USB Audio
The CS4352-CZZ is well suited to a USB or network-audio source that feeds a powered-speaker controller through a digital audio interface. Its 24-bit resolution and 192 kHz maximum rate preserve high-resolution source data, while hardware mode control provides a straightforward implementation without a software-programmable control port. The integrated stereo mute and auto-mute functions can suppress output during host-state changes, although the exact mute polarity and timing should be verified in hardware. Pay attention to the separate 3.13–3.47 V analog and 8.4–12.6 V digital supplies when designing the system power tree.
अनुशंसित
Multimedia System Audio
The CS4352-CZZ can provide a compact stereo analog output for tablets, displays, set-top systems, and other multimedia equipment. Its 192 kHz sample-rate support, integrated line driver, and internal analog low-pass filter reduce the component count needed around a digital audio processor. Hardware mode control is useful in cost-sensitive designs where a software register interface is unnecessary. The implementation should account for the required 8.4–12.6 V digital supply, which may need local regulation from a lower system rail. Keep the analog section away from display, wireless, and processor switching activity to avoid degrading noise performance.
अनुशंसित
Digital Audio Interface and Line Output
The CS4352-CZZ can serve as the endpoint of a digital audio interface when the upstream device provides compatible serial data, clock, and hardware-mode controls. Its SPI-listed interface and 24-bit operation align with common audio transports, while the 106 dB A-weighted dynamic range provides sufficient headroom for a line-level stage. Unlike a software-programmable DAC, its fixed hardware configuration makes the design deterministic and compact. Engineers should verify clocking, serial word format, reset behavior, and supported master-clock arrangements against the manufacturer timing diagrams rather than assuming compatibility from the SPI label alone.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा CS4352-CZZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | CS4352-DZZ | CS4351-CZZ | CS4350-CZZR | CS4352-CZZR | CS4361-CZZ |
|---|---|---|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 20-TSSOP | 20-TSSOP - same | 20-TSSOP - same | 20-TSSOP - same | 20-TSSOP - same | 20-TSSOP - same |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Audio DAC |
मुख्य विशेषताएँ
- High-resolution stereo conversion in a compact 20-pin package (बनामCS4350-CZZR)
- Integrated analog reconstruction and line-drive functions (बनामCS4351-CZZ)
- Low-distortion output performance (बनामCS4352-CZZR)
- Automotive-oriented family positioning (बनामCS4361-CZZ)
डिज़ाइन नोट्स
Use the manufacturer's 20-pin TSSOP land pattern and verify pin 1 orientation against the package drawing before layout release. Place the recommended bypass capacitors adjacent to the analog and digital supply pins, with short ground returns. Route the serial interface, clock, and reset signals away from the stereo analog outputs, and avoid placing the analog output path beneath digital clock signals or switching-regulator components.
Keep the CS4352-CZZ analog traces short and treat left and right outputs as sensitive audio signals. Use a continuous ground reference without splitting the ground plane beneath the converter, and place output-resistor or coupling networks close to the relevant device pins. Verify the actual downstream load because the 2 Vrms line-driver specification is not independent of load, output impedance, supply headroom, and the distortion target.
The CS4352-CZZ requires a 3.13–3.47 V analog supply and an 8.4–12.6 V digital supply. Regulate or decouple these rails close to the device and keep analog and digital return currents controlled, particularly when the digital rail originates from a switching converter. Confirm startup order, reset timing, and mute polarity in the complete signal chain; the CS4352 uses hardware mode control, so incorrect strap or mode settings can prevent intended operation.
Do not treat a shared TSSOP package as sufficient proof of replacement compatibility. For CS4352-DZZ, CS4351-family, CS4350-family, CS4361-family, or alternate shipment-form options, compare every pin, supply voltage, clock requirement, serial format, mute polarity, output load, and qualification category. The manufacturer identifies the CS4352 as pin-compatible with the CS4351 architecture, but each ordering code still requires a documented engineering review.
अनुपालन जानकारी
The CS4352 family is identified for automotive audio applications, but no exact-suffix AEC-Q100 qualification statement, RoHS declaration, REACH declaration, lead-free statement, halogen-free statement, or conflict-minerals report is present in the referenced product material. Compliance must therefore be confirmed for the exact orderable part.