Cirrus Logic Inc.

CS4352-CZZ - 24-Bit 192kHz Stereo DAC | Cirrus Logic

MPN: CS4352-CZZ ✗ סוף ייצור
3.13 V to 3.47 V Vdss 20-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

CS4352-CZZ סקירה

The Cirrus Logic CS4352-CZZ is a 24-bit stereo digital-to-analog converter with support for sample rates up to 192 kHz, an integrated line driver, and a 20-pin TSSOP package. It provides 2 Vrms output capability and combines a multi-bit delta-sigma modulator with an integrated analog low-pass filter for audio signal conversion.

A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage suitable for line-level amplification, headphone stages, powered speakers, or audio analog-to-digital converters. The CS4352 belongs to the stereo DAC hierarchy within audio converter ICs and integrates digital interface circuitry, a multi-bit delta-sigma modulator, reconstruction filtering, and output amplification into one surface-mount device.

Key features include 24-bit resolution, operation up to 192 kHz, 106 dB A-weighted dynamic range, and -93 dB total harmonic distortion plus noise. The integrated line driver is specified for 2 Vrms output, while stereo mute controls and an auto-mute function simplify signal management in consumer, professional, and automotive audio equipment. A 20-pin TSSOP package supports compact surface-mount layouts.

The device uses hardware mode control rather than a software-programmable architecture. Its serial interface is identified as SPI-compatible in distributor technical listings, while the analog section includes a stereo low-pass filter and line driver. This combination reduces the number of external signal-chain blocks required for a conventional consumer-audio reconstruction path, although external routing and output conditioning still depend on the host board.

Typical uses include powered speakers, compact stereo receivers, home-audio equipment, automotive head units, professional audio electronics, and embedded multimedia systems. The 192 kHz capability supports high-resolution PCM streams, while the 106 dB A-weighted dynamic range is appropriate for low-distortion line output stages. Software mute and auto-mute behavior can also suppress unwanted analog noise during idle or mode-transition periods.

For layout, keep the digital interface traces short, provide clean analog and digital supply rails, and place decoupling capacitors close to their associated pins. Treat the analog output as a high-value audio signal path and avoid routing it beside switching-converter nodes. Confirm the package footprint, supply rails, interface mode, output loading, and mute polarity against the manufacturer datasheet before final PCB release.

This product summary combines the CS4352-CZZ electrical characteristics, package details, lifecycle position, replacement considerations, and practical integration guidance in one engineering-focused reference. It also organizes same-footprint alternatives and application trade-offs to support faster design selection without relying on a simple distributor listing alone.

חלופות תחליף ישיר עבור CS4352-CZZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם CS4352-CZZ (אותו גורם צורה וטביעת רגל) — שונים ב Dynamic Range, Digital De-emphasis, Modulator Architecture, Mounting Type.

Cirrus Logic Inc.
Dynamic Range: 102 dB
Digital De-emphasis: Supported
Modulator Architecture: Fifth-order multi-bit delta-sigma
השווה עם CS4352-CZZ →
Cirrus Logic Inc.
Dynamic Range: 105 dB
Digital De-emphasis: On-chip
Mounting Type: Surface mount
השווה עם CS4352-CZZ →

CS4352-DZZ

✅ Drop-In
Cirrus Logic Inc.
📦 20-TSSOP
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · 102 dB · 106 dB · -93 dB · 2 Vrms · SPI

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

CS4351-CZZ

✅ Drop-In
📦 20-TSSOP
Pin-compatible CS4351-family alternative with the same 24-bit, 192 kHz stereo DAC class; feature differences remain within 10%

📋 חלופה להתייחסות (לא בקטלוג)

CS4350-CZZR

✅ Drop-In
📦 20-TSSOP
Same 20-pin TSSOP stereo-DAC footprint and 24-bit/192 kHz performance class; feature differences remain within 20%

📋 חלופה להתייחסות (לא בקטלוג)

CS4352-CZZR

✅ Drop-In
📦 20-TSSOP
Identical 24-bit, 192 kHz and 20-pin TSSOP key ratings; shipment-form suffix differs without changing core specifications

📋 חלופה להתייחסות (לא בקטלוג)

CS4361-CZZ

✅ Drop-In
Cirrus Logic Inc.
📦 20-TSSOP
6 channels · 24 bit · 192 kHz · 105 dB · I2S · All major audio data interface formats · 3.3 V or 5 V · Built-in

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

CS4352-CZZ דירוגים מרביים ומאפיינים חשמליים

Converter Type Stereo audio digital-to-analog converter
רזולוציה 24 bit
Maximum Sample Rate 192 kHz
Dynamic Range 106 dB A-weighted
THD+N -93 dB
Integrated Line Output 2 Vrms
Modulator Architecture Multi-bit delta-sigma
Analog Filter Integrated stereo low-pass filter
Digital Interface SPI
Control Mode Hardware mode only
Mute Functions Stereo mute and auto-mute
Analog Supply Range 3.13 V to 3.47 V
Digital Supply Range 8.4 V to 12.6 V
טמפרטורת פעולה -40°C to +85°C
מארז 20-pin TSSOP
סוג הרכבה SMD surface mount
RoHS Compliance unknown
REACH Compliance unknown

מדריך תצורת פינים של CS4352-CZZ 20-pin tssop

תצורת פינים עבור CS4352-CZZ (מארזת 20-pin tssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 20-pin tssop עבור CS4352-CZZ

אין נתוני פריסת פינים מפורטים עבור CS4352-CZZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

CS4352-CZZ מתאים עבור 6 יישוםs: High-Resolution Consumer Audio, Automotive Head-Unit Audio, Professional Stereo Monitoring, Powered Speaker USB Audio, Multimedia System Audio, Digital Audio Interface and Line Output.

🎧

High-Resolution Consumer Audio

The CS4352-CZZ fits line-output stages requiring 24-bit data and sample rates up to 192 kHz because its multi-bit delta-sigma modulator supports high-resolution PCM streams. Its 106 dB A-weighted dynamic range and -93 dB THD+N provide a useful performance target for compact amplifiers, music players, and home-audio receivers. The integrated analog low-pass filter removes much of the need for external reconstruction circuitry, while the 2 Vrms line driver supplies a convenient stereo output. Designers should still verify output loading, mute timing, and analog-supply headroom against the manufacturer datasheet before fixing the analog stage.

🚗

Automotive Head-Unit Audio

The CS4352-CZZ is suitable for automotive audio line outputs because Cirrus Logic identifies the CS4352 family for automotive audio applications and reports a -40°C to +85°C operating range. The 192 kHz capability accommodates high-resolution source material, while the integrated line driver, stereo mute, and auto-mute function support controlled transitions during source changes. An automotive design must still confirm qualification documents for the exact suffix, electromagnetic requirements, supply transients, and load behavior. Use clean analog routing and local bypass capacitors to preserve the 106 dB A-weighted dynamic-range target.

🎚️

Professional Stereo Monitoring

The CS4352-CZZ can serve as the stereo line-output converter in professional monitoring equipment when the design values low distortion over a compact board area. Its -93 dB THD+N, 106 dB A-weighted dynamic range, and integrated analog low-pass filter support a direct conversion path from the digital audio bus to line-level outputs. The 2 Vrms line driver simplifies balancing and gain-staging decisions, but output impedance, load, and downstream amplifier headroom must be checked before layout approval. Short analog traces and separate return paths are especially important when the converter is placed near switching power stages.

🖥️

Powered Speaker USB Audio

The CS4352-CZZ is well suited to a USB or network-audio source that feeds a powered-speaker controller through a digital audio interface. Its 24-bit resolution and 192 kHz maximum rate preserve high-resolution source data, while hardware mode control provides a straightforward implementation without a software-programmable control port. The integrated stereo mute and auto-mute functions can suppress output during host-state changes, although the exact mute polarity and timing should be verified in hardware. Pay attention to the separate 3.13–3.47 V analog and 8.4–12.6 V digital supplies when designing the system power tree.

📺

Multimedia System Audio

The CS4352-CZZ can provide a compact stereo analog output for tablets, displays, set-top systems, and other multimedia equipment. Its 192 kHz sample-rate support, integrated line driver, and internal analog low-pass filter reduce the component count needed around a digital audio processor. Hardware mode control is useful in cost-sensitive designs where a software register interface is unnecessary. The implementation should account for the required 8.4–12.6 V digital supply, which may need local regulation from a lower system rail. Keep the analog section away from display, wireless, and processor switching activity to avoid degrading noise performance.

🌐

Digital Audio Interface and Line Output

The CS4352-CZZ can serve as the endpoint of a digital audio interface when the upstream device provides compatible serial data, clock, and hardware-mode controls. Its SPI-listed interface and 24-bit operation align with common audio transports, while the 106 dB A-weighted dynamic range provides sufficient headroom for a line-level stage. Unlike a software-programmable DAC, its fixed hardware configuration makes the design deterministic and compact. Engineers should verify clocking, serial word format, reset behavior, and supported master-clock arrangements against the manufacturer timing diagrams rather than assuming compatibility from the SPI label alone.

What are the key specifications of CS4352-CZZ that engineers should know?
The CS4352-CZZ is a 24-bit stereo DAC that supports sample rates up to 192 kHz and delivers 106 dB A-weighted dynamic range with -93 dB THD+N. According to the Cirrus Logic manufacturer datasheet, it includes a multi-bit delta-sigma modulator, an integrated stereo analog low-pass filter, and an integrated line driver capable of 2 Vrms output. The device uses a 20-pin TSSOP package and hardware mode control, with separate analog and digital supply requirements of 3.13–3.47 V and 8.4–12.6 V, respectively.
Where can I download the CS4352-CZZ datasheet PDF?
The official CS4352 product page at Cirrus Logic provides the manufacturer documentation for the CS4352 family, including the CS4352-CZZ ordering information and technical resources. The manufacturer describes the CS4352 as a low-profile, 20-pin, 102 dB stereo DAC for consumer, professional, and automotive audio applications. Use the pin-description table and electrical-characteristics sections in that datasheet to verify PCB assignments, supply sequencing, output loading, and mute behavior before releasing a layout.
Where can I find the CS4352-CZZ pinout for a 20-pin TSSOP footprint?
The CS4352-CZZ uses a 20-pin TSSOP package, and its authoritative pin assignments are shown in the pin-description table of the Cirrus Logic manufacturer datasheet. Use that table when assigning power, ground, serial-interface, clock, reset, mute, and analog-output nets. The package drawing also defines lead pitch and body dimensions, which must be checked against the PCB library and exposed-pad requirements before fabrication.
What can replace the discontinued CS4352-CZZ?
The CS4352-CZZR and CS4352-DZZ are the closest same-family ordering options, while CS4351-family devices are identified as pin-compatible with the CS4352 architecture. The manufacturer calls the CS4352 a hardware-mode, cost-efficient version of the CS4351 stereo DAC. Before selecting a replacement, verify the exact pinout, supply levels, serial-interface timing, mute polarity, output-load capability, and automotive qualification requirements; a shared package alone does not establish full functional equivalence.
Is CS4352-CZZ suitable for 192 kHz high-resolution audio?
Yes, the CS4352-CZZ supports sampling rates up to 192 kHz with 24-bit resolution. According to the Cirrus Logic manufacturer datasheet, its multi-bit delta-sigma conversion architecture provides 106 dB A-weighted dynamic range and -93 dB THD+N. The device also includes an integrated reconstruction filter and 2 Vrms line driver, making it suitable for line-output stages in high-resolution consumer, professional, and automotive audio systems.
What is the difference between CS4352-CZZ and CS4352-CZZR?
The CS4352-CZZ and CS4352-CZZR identify different orderable forms of the same CS4352 family, and distributor listings describe both as 20-pin TSSOP, 24-bit, 192 kHz stereo DACs. Their key ordering distinction is the package shipment form associated with the suffix. Confirm the required assembly packaging, pin configuration, lifecycle status, and exact orderable designation before procurement, and use the manufacturer ordering information rather than assuming that a different suffix changes the electrical rating.
When should I choose CS4352-CZZ over a CS4351-family device?
Choose the CS4352-CZZ when the design needs the lower-cost, hardware-mode stereo DAC implementation defined for the CS4352 family. According to the Cirrus Logic manufacturer product page, the CS4352 is pin-compatible with the popular CS4351 stereo DAC and is intended for cost-efficient consumer, professional, and automotive audio equipment. Select a CS4351 option instead when its additional device-specific functions or control requirements are needed, and confirm that the chosen family member matches the existing schematic and pin configuration.
Is the CS4352-CZZ suitable for automotive audio systems?
The CS4352 is explicitly identified by Cirrus Logic as suitable for automotive audio applications, and the reported operating-temperature range for CS4352-CZZ is -40°C to +85°C. However, the manufacturer product page does not by itself establish AEC-Q100 qualification for every ordering suffix. Automotive programs should therefore request the applicable qualification and traceability documentation, and confirm that the exact orderable part meets the vehicle-level environmental and quality requirements.
What power supplies and decoupling does the CS4352-CZZ need?
The CS4352-CZZ uses an analog supply range of 3.13 V to 3.47 V and a digital supply range of 8.4 V to 12.6 V. According to the Cirrus Logic manufacturer datasheet, the device includes an integrated line driver and analog low-pass filter, but the external supply network must still provide clean, low-impedance power at the device pins. Place the recommended bypass capacitors close to their associated supply and ground pins and keep switching-node copper away from the analog output traces.
How much output can the CS4352-CZZ line driver provide?
The integrated line driver in the CS4352-CZZ is specified for 2 Vrms output. The Cirrus Logic manufacturer datasheet also describes stereo mute and auto-mute functions alongside the analog low-pass filter. Actual usable output depends on the connected load, analog supply condition, output termination, and downstream amplifier gain, so use the datasheet load and headroom limits when sizing coupling components or designing a line-level output stage.
What is the lifecycle status of CS4352-CZZ?
The CS4352 family is marked discontinued on the official Cirrus Logic product page, so CS4352-CZZ should be treated as an obsolete or legacy-ordering device rather than a new-design choice. For existing equipment, verify the exact suffix, documented package shipment form, and any remaining authorized supply before committing a repair or production build. New designs should normally evaluate a currently supported stereo DAC unless the system has a documented reason to retain the CS4352 footprint.
What are the main design considerations for a CS4352-CZZ audio board?
The main design considerations are supply separation, short digital routes, controlled analog outputs, and correct TSSOP land patterns. According to the Cirrus Logic manufacturer datasheet, the part supports 3.13–3.47 V analog and 8.4–12.6 V digital supplies and uses hardware mode control. Place decoupling capacitors close to the relevant pins, route the SPI and clock signals away from analog outputs, avoid stubs on sensitive lines, and verify mute polarity and reset behavior in the final system timing.
Is the PCM1794A a pin-for-pin replacement for the CS4352-CZZ?
No, the PCM1794A should not be treated as a pin-for-pin replacement for the CS4352-CZZ. Cross-reference information identifies the PCM1794A as a potential functional alternative but explicitly states that it is not a direct pin-to-pin substitute. Its interface, supply arrangement, package footprint, and control requirements must be reviewed before use. For a true footprint-compatible replacement, prioritize a documented Cirrus Logic same-family ordering option and validate every net against the original schematic.
How does the CS4352-CZZ compare with the CS4352-DZZ?
The CS4352-CZZ and CS4352-DZZ are both listed as 24-bit stereo DACs in 20-pin TSSOP packaging, and cross-reference results identify the CS4352-DZZ as a replace-part candidate. The suffix distinction must still be confirmed through the manufacturer ordering table, including temperature grade, packing form, and lifecycle status. Treat the device as a drop-in candidate only after checking pin names, power rails, serial timing, mute polarity, and output specifications against the specific circuit revision.
Can I buy CS4352-CZZ online and what is its lead time?
Use the Request a Quote form on this page to request the current CS4352-CZZ unit price, stock position, minimum order quantity, and lead time. The CS4352 family is discontinued, and the visible commercial information should not be interpreted as a guaranteed allocation. For production continuity, provide the exact suffix, required package shipment form, annual usage, and inspection requirements so the request can be matched to an available sourcing route.

נתוני עזר הנדסיים עבור CS4352-CZZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the CS4352-CZZ when maintaining an existing 20-pin TSSOP stereo-DAC design and the required behavior is 24-bit conversion up to 192 kHz with an integrated 2 Vrms line driver. Its 106 dB A-weighted dynamic range and -93 dB THD+N suit high-quality line-output stages, while hardware mode control simplifies designs that do not require a programmable DAC. For maintenance, first consider CS4352-DZZ or the corresponding CS4352 shipment form after verifying the exact ordering table and lifecycle status. A CS4351-family part is appropriate when its additional functions are needed and its datasheet confirms compatibility with the original circuit. CS4350- or CS4361-family candidates require more careful pin, interface, channel, and performance review. For new products, favor a currently supported converter unless retaining the existing footprint is essential. Treat the PCM1794A and AK4490EQ as functional references rather than pin-to-pin replacements.

השוואה עם חלופות

פרמטר מוצר זה CS4352-DZZ CS4351-CZZ CS4350-CZZR CS4352-CZZR CS4361-CZZ
Brand Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic
Package 20-TSSOP 20-TSSOP - same 20-TSSOP - same 20-TSSOP - same 20-TSSOP - same 20-TSSOP - same
Converter Type Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC Audio DAC

מבדילים עיקריים

  • High-resolution stereo conversion in a compact 20-pin package (לעומתCS4350-CZZR)
  • Integrated analog reconstruction and line-drive functions (לעומתCS4351-CZZ)
  • Low-distortion output performance (לעומתCS4352-CZZR)
  • Automotive-oriented family positioning (לעומתCS4361-CZZ)

הערות תכנון

Use the manufacturer's 20-pin TSSOP land pattern and verify pin 1 orientation against the package drawing before layout release. Place the recommended bypass capacitors adjacent to the analog and digital supply pins, with short ground returns. Route the serial interface, clock, and reset signals away from the stereo analog outputs, and avoid placing the analog output path beneath digital clock signals or switching-regulator components.

Keep the CS4352-CZZ analog traces short and treat left and right outputs as sensitive audio signals. Use a continuous ground reference without splitting the ground plane beneath the converter, and place output-resistor or coupling networks close to the relevant device pins. Verify the actual downstream load because the 2 Vrms line-driver specification is not independent of load, output impedance, supply headroom, and the distortion target.

The CS4352-CZZ requires a 3.13–3.47 V analog supply and an 8.4–12.6 V digital supply. Regulate or decouple these rails close to the device and keep analog and digital return currents controlled, particularly when the digital rail originates from a switching converter. Confirm startup order, reset timing, and mute polarity in the complete signal chain; the CS4352 uses hardware mode control, so incorrect strap or mode settings can prevent intended operation.

Do not treat a shared TSSOP package as sufficient proof of replacement compatibility. For CS4352-DZZ, CS4351-family, CS4350-family, CS4361-family, or alternate shipment-form options, compare every pin, supply voltage, clock requirement, serial format, mute polarity, output load, and qualification category. The manufacturer identifies the CS4352 as pin-compatible with the CS4351 architecture, but each ordering code still requires a documented engineering review.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The CS4352 family is identified for automotive audio applications, but no exact-suffix AEC-Q100 qualification statement, RoHS declaration, REACH declaration, lead-free statement, halogen-free statement, or conflict-minerals report is present in the referenced product material. Compliance must therefore be confirmed for the exact orderable part.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

CS4352-CZZ datasheet CS4352-CZZ datasheet pdf CS4352-CZZ pinout CS4352-CZZ replacement CS4352-CZZ equivalent CS4352-CZZ cross reference CS4352-CZZ vs CS4352-DZZ CS4352-CZZ vs CS4351-CZZ Cirrus Logic CS4352-CZZ CS4352-CZZ 20-TSSOP CS4352-CZZ 24-bit 192kHz CS4352-CZZ automotive audio DAC CS4352-CZZ price CS4352-CZZ stock what replaces CS4352-CZZ

רכיבים ומונחים קשורים

Cirrus Logic CS4352-CZZ CS4352-DZZ CS4351-CZZ CS4350-CZZR CS4352-CZZR CS4361-CZZ PCM1794A AK4490EQ digital-to-analog converter DAC stereo DAC audio converter IC delta-sigma modulator integrated low-pass filter integrated line driver SPI 24-bit resolution 192 kHz sampling rate 106 dB A-weighted dynamic range -93 dB THD+N 2 Vrms line output 20-pin TSSOP TSSOP package family surface-mount device
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר