DG407DW - Dual 8:1 CMOS Analog Multiplexer | Vishay
MPN: DG407DW ✓ सक्रियDG407DW अवलोकन
An analog multiplexer is an interface IC that connects multiple input channels to a shared signal path under digital control. The DG407DW belongs to the CMOS analog switch and multiplexer hierarchy, where low on-resistance preserves signal amplitude, low charge injection reduces switching errors, and short transition time supports higher-speed routing. Its dual differential architecture suits measurement systems requiring balanced input and output connections.
Key features include two independent 8-channel differential sections, 50 ohm on-resistance, 15 pC charge injection, and a 200 ns transition time. The 44 V maximum supply rating provides additional operating headroom in industrial and instrumentation environments, while the 0.2 mW power figure highlights suitability for battery-operated and remote equipment. Reduced glitching and improved data throughput are explicit design goals of the DG407 family.
The DG407 uses digital address and enable control to determine which differential input is connected to the output. Because it is a CMOS analog multiplexer rather than a digital logic device, its useful performance is governed by analog switching parameters such as on-resistance, off leakage, charge injection, and channel-transition behavior. Designers should evaluate those parameters against the bandwidth, source impedance, and acceptable settling error of the signal being routed.
Typical uses include high-speed data-acquisition systems, audio signal routing, automatic test equipment, avionics, remote instrumentation, and battery-powered measurement products. In each case, the two differential multiplexer sections can route balanced sources while reducing wiring complexity. The manufacturer datasheet identifies low power dissipation and low on-resistance as especially useful for portable and precision signal-chain systems.
PCB design should preserve the pin orientation, supply decoupling, and analog return paths recommended by the manufacturer. Input and output traces should be kept compact and away from high-energy switching nodes, while the address and enable traces should be routed to minimize coupling into the selected analog channel. System engineers should also account for charge injection and transition time when settling data after every address change.
This product page combines the DG407DW operating characteristics with application guidance, package details, and a structured comparison against identified ordering alternatives. It is designed to help engineers select the correct mux configuration, plan layout and signal conditioning, and assess replacement options without overlooking analog switching constraints.
के लिए ड्रॉप-इन विकल्प DG407DW — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
DG407DW-E3
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG407DW विशेषताएं
| Multiplexer Configuration | Dual 8:1 differential analog multiplexer |
| Number of Circuits | 2 circuits |
| Number of Inputs per Circuit | 8 differential inputs |
| On-Resistance | 50 ohm |
| Charge Injection | 15 pC |
| Transition Time | 200 ns |
| Power Dissipation | 0.2 mW |
| Maximum Supply Voltage | 44 V |
| Supply Type | Single-supply capable |
| Technology | CMOS |
| पैकेज | 28-pin SOIC |
| माउंटिंग प्रकार | Surface mount |
DG407DW 28-pin soic पिन कॉन्फ़िगरेशन गाइड
DG407DW (28-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: DG407DW.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
DG407DW के लिए उपयुक्त है 6 अनुप्रयोगs: High-Speed Data Acquisition, Audio Signal Routing, Automatic Test Equipment, Remote Instrumentation, Avionics Signal Routing, Battery-Powered Sensor Interfaces.
High-Speed Data Acquisition
The DG407DW fits multiplexed data-acquisition systems that route balanced sensor outputs into a shared measurement chain. Its two 8:1 differential sections can reduce the number of amplifiers and ADC input channels required when several correlated inputs must be sampled sequentially. The manufacturer datasheet specifies a 200 ns transition time, 50 ohm on-resistance, and reduced glitching, which provide a concrete starting point for timing and error budgets. The acquisition system should still allow adequate settling after each address change and validate the 15 pC charge injection against the selected amplifier and ADC acquisition window.
अनुशंसित
Audio Signal Routing
The DG407DW is appropriate for balanced audio routing in test and signal-routing equipment because the manufacturer datasheet identifies audio signal switching and routing as an intended use. Each differential section can connect one of eight balanced sources to a common output, helping preserve a symmetrical signal path through the board. The 50 ohm on-resistance should be compared with the source and load impedances to determine channel loss, while the 200 ns transition time supports switching well above ordinary audio frequencies. Confirm that audio amplitudes, bandwidth, and transient expectations remain within the device's stated operating limits.
अनुशंसित
Automatic Test Equipment
The DG407DW can reduce connection complexity in automatic test equipment by routing multiple balanced test channels through a shared measurement path. Its dual differential organization allows two groups of eight inputs to be selected independently, which is useful when a test system must compare paired signals or preserve differential excitation. The manufacturer datasheet lists ATE as an intended application and highlights low on-resistance, reduced glitching, and improved data throughput. Timing should nevertheless include source settling and measurement acquisition delays, and engineers should verify that every routed signal remains within the mux's common-mode and voltage limits.
अनुशंसित
Remote Instrumentation
The DG407DW suits remote and battery-operated instrumentation where numerous balanced inputs must be routed through a compact, low-power interface. The manufacturer datasheet identifies remote instrumentation and battery-operated applications, with low power dissipation listed as 0.2 mW and low on-resistance as 50 ohm. These characteristics allow multiple channels to be selected while limiting the load introduced by the multiplexing stage. Because the device is analog rather than a signal processor, appropriate front-end amplification and filtering remain necessary to control noise, offset, and the effects of the specified 15 pC charge injection.
अनुशंसित
Avionics Signal Routing
The DG407DW can be evaluated for avionics signal routing where multiple balanced channels require compact multiplexing and rapid selection. The manufacturer datasheet explicitly lists avionics among the DG406 and DG407 applications and identifies improved data throughput and reduced glitching as design objectives. The 28-pin SOIC package provides a defined surface-mount assembly format, while the two differential sections simplify paired-signal routing. Qualification for a specific airborne program requires separate review of operating temperature, supply tolerance, reliability documentation, and applicable aerospace procurement requirements.
अनुशंसित
Battery-Powered Sensor Interfaces
The DG407DW is useful in battery-powered sensor interfaces that must select among several differential sensor channels while conserving power. Its stated 0.2 mW power dissipation and 50 ohm on-resistance provide useful initial values for comparing the mux against longer sensor wiring and higher-power switching stages. The 15 pC charge injection should be included in the settling analysis when the selected source drives a high-impedance amplifier. Designers should also verify input common-mode range, leakage, and supply behavior at the lowest battery voltage to ensure reliable operation throughout the discharge cycle.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा DG407DW — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | DG407DW-E3 |
|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC |
| Brand | Vishay Intertechnology | Vishay Intertechnology |
| Multiplexer Configuration | Dual 8:1 differential | Dual 8:1 differential |
| Number of Circuits | 2 circuits | 2 circuits |
| On-Resistance | 50 ohm | 50 ohm |
| Charge Injection | 15 pC | 15 pC |
| Transition Time | 200 ns | 200 ns |
| Power Dissipation | 0.2 mW | 0.2 mW |
| Maximum Supply Voltage | 44 V | 44 V |
| Supply Capability | Single-supply capable | Single-supply capable |
मुख्य विशेषताएँ
- Differential dual-section routing (बनामDG406DW)
- Low stated on-resistance for signal preservation (बनामDG407DW-E3)
- Fast channel transition and controlled charge injection (बनामDG407DW-E3)
डिज़ाइन नोट्स
Treat each address transition as an analog settling event. The specified 200 ns transition time is not the complete acquisition delay: include amplifier recovery, the 15 pC charge injection transient, source impedance, and the selected channel's 50 ohm on-resistance in the system timing budget. For differential routing, keep the paired input and output traces closely coupled and provide equal-length paths where channel-to-channel skew would otherwise affect the result.
Use the manufacturer pin-description table to assign all 28 SOIC positions and cross-check the physical pin-1 orientation against the PCB footprint. Place the supply bypass capacitor close to the device's supply and ground pins, and keep high-impedance routing short to minimize leakage and induced error. Avoid placing switching-node copper directly beneath the analog output or control traces because coupling can appear as extra charge injection or channel-to-channel glitching.
Do not equate a 50 ohm on-resistance rating with a source-impedance requirement. The total channel resistance includes the selected switch resistance and all series source impedance, while off-channel leakage and input capacitance can affect the next conversion after switching. Also verify common-mode limits and supply polarity for both single-ended and differential operation; the 44 V maximum supply rating is an absolute limit, not a recommended operating point.
अनुपालन जानकारी
Compliance status was not stated in the cited product and distributor information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the current manufacturer documentation or declaration.