Maxim Integrated

DG409CUE+ Dual 4:1 CMOS Multiplexer | Maxim Integrated

MPN: DG409CUE+ ✓ सक्रिय
Up to +30 V Vdss 100 ohms maximum Rds(on) 16-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

DG409CUE+ अवलोकन

The Maxim Integrated DG409CUE+ is a dual 4:1 CMOS analog multiplexer with two independent 4:1 switching circuits, a maximum on-resistance of 100 ohms, and a 16-pin TSSOP package. It operates with supply voltages up to +30 V for single-supply operation and up to ±20 V for dual-supply operation, making it suitable for routing bipolar or unipolar analog signals.

A CMOS analog multiplexer is an interface IC that connects multiple signal inputs to a shared output under digital control. Each DG409CUE+ circuit uses address and enable logic to select one of four inputs. The DG409 family belongs to the broader analog switch and multiplexer hierarchy, where low on-resistance, predictable channel behavior, and controlled switching are central to accurate signal routing.

The DG409CUE+ provides improved matching between channels, guaranteed at 8 ohms maximum, and flatness over the specified signal range of 9 ohms maximum. Its 100-ohm maximum on-resistance limits signal attenuation when the device routes low-frequency analog signals. ESD protection greater than 2,000 V according to MIL-STD-883 Method 2002 adds handling protection for the switching pins.

The device is designed for both single-ended and balanced routing architectures. Two multiplexers in one package can implement a 4:1 analog selection function, a dual-channel instrumentation interface, or a paired differential signal path. Its CMOS implementation supports bidirectional analog conduction, allowing the selected terminals to serve as inputs or outputs as required by the circuit topology.

Typical applications include data acquisition, sample-and-hold systems, battery monitoring, test equipment, signal routing in industrial controls, and precision analog measurement. The dual 4:1 organization is particularly useful when two related signals must be selected simultaneously, such as differential sensor outputs, although the address and enable timing should be coordinated to prevent unintended channel transitions.

PCB layout should minimize resistance and inductance in analog signal paths. Place the TSSOP-16 device close to connector and measurement circuitry, route selected and unselected analog terminals away from fast digital clocks, and use a solid ground plane. Supply bypassing should be placed at the power pins, while address and enable traces require clean return paths to prevent switching transients from coupling into the selected channel.

This page combines the device's key electrical characteristics, functional positioning, application guidance, design precautions, and compatibility analysis. It also provides practical criteria for determining when the DG409CUE+ fits a routing requirement and when a different package or multiplexer architecture should be selected.

के लिए ड्रॉप-इन विकल्प DG409CUE+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

DG409CUE

✅ ड्रॉप-इन
📦 16-pin TSSOP
Ordering-suffix and qualification terms may differ; both are 16-pin TSSOP dual 4:1 devices with a maximum on-resistance of 100 ohms

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

DG409CUE+ विशेषताएं

Multiplexer Type Dual 4:1 CMOS analog multiplexer
Number of Circuits 2 circuits
On-Resistance 100 ohms maximum
Channel Matching 8 ohms maximum
Flatness Over Signal Range 9 ohms maximum
Single-Supply Voltage Up to +30 V
Dual-Supply Voltage Up to ±20 V
ESD Protection Greater than 2,000 V per MIL-STD-883 Method 2002
Technology CMOS
पैकेज 16-pin TSSOP
माउंटिंग प्रकार Surface mount
Analog Signal Conduction Bidirectional
Production Status Production

DG409CUE+ 16-pin tssop पिन कॉन्फ़िगरेशन गाइड

DG409CUE+ (16-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

DG409CUE+ के लिए 16-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: DG409CUE+.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

DG409CUE+ के लिए उपयुक्त है 6 अनुप्रयोगs: Battery Monitoring Systems, Data Acquisition Front Ends, Test and Measurement Routing, Industrial Control Signal Multiplexing, Sample-and-Hold Systems, Balanced Differential Signal Routing.

⚡

Battery Monitoring Systems

The DG409CUE+ fits battery-monitoring boards that must route several cell or pack voltages to a common measurement amplifier. Its two independent 4:1 circuits can select related voltage pairs, while the 100-ohm maximum on-resistance limits attenuation when the source impedance is much higher than the switch resistance. The 8-ohm maximum channel matching and 9-ohm maximum flatness also help maintain consistency between selected battery taps. The device can operate from a single supply up to +30 V, making it relevant for industrial packs whose monitored voltages remain within that limit. Protection components and high-impedance dividers should be placed ahead of the multiplexer so that the switch handles a controlled signal range.

📊

Data Acquisition Front Ends

The DG409CUE+ is appropriate for data-acquisition front ends that must connect several sensor outputs to a shared analog-to-digital converter input. Two 4:1 sections permit paired channel selection, which is useful for differential measurements when both sides of a sensor require synchronized routing. A maximum on-resistance of 100 ohms is generally suitable for low-frequency, high-impedance sensors, while the specified 8-ohm channel matching and 9-ohm flatness reduce amplitude changes caused by channel selection. The common terminals conduct bidirectionally, allowing flexible signal-flow arrangements. Designers should verify converter acquisition time, mux settling behavior, source impedance, and the address-to-enable timing before fixing the sampling sequence.

🔧

Test and Measurement Routing

The DG409CUE+ can route test signals in instrumentation where several sources must connect to one measurement chain without relocating probes. Its dual 4:1 organization allows two routing paths to be switched together, reducing the number of separate multiplexer packages needed for paired or comparative tests. The 100-ohm maximum on-resistance is suitable for many low-frequency instrumentation signals, and the 8-ohm maximum channel matching supports repeatable comparisons across inputs. For high-impedance buffers or precision dividers, account for the switch resistance when calculating attenuation. Keep sensitive analog routes away from digital address lines and use a low-impedance ground return to minimize coupling into the selected measurement path.

🏭

Industrial Control Signal Multiplexing

The DG409CUE+ supports industrial control boards that must select among multiple analog command, feedback, or sensor signals using digital control logic. Its +30 V maximum single-supply operation is useful for systems with higher-voltage process signals, while the ±20 V dual-supply range supports bipolar analog environments. Two independent multiplexers can manage separate command and feedback channels without adding another package. The improved matching of 8 ohms maximum and flatness of 9 ohms maximum help reduce errors when the controller compares signals from different sources. The system designer must still confirm common-mode limits, input overvoltage protection, control thresholds, and whether a 100-ohm maximum switch resistance is acceptable for the driven load.

📈

Sample-and-Hold Systems

The DG409CUE+ can be used to select which signal is presented to a sample-and-hold stage when multiple sources require periodic capture. The bidirectional analog paths support both source and destination signal flow, and the two 4:1 sections can select two related channels for matched sampling. Its low specified channel matching of 8 ohms maximum and flatness of 9 ohms maximum are important when the downstream circuit distinguishes amplitude differences between channels. Designers should account for switch on-resistance, control timing, and downstream sampling time rather than assuming instantaneous selection. Short analog traces, a continuous ground plane, and separation from high-speed control and clock traces will reduce settling errors and crosstalk in precision acquisition paths.

🌐

Balanced Differential Signal Routing

The DG409CUE+ is useful when two 4:1 sections must route positive and negative sides of a differential signal. Selecting corresponding channels on both multiplexers allows a differential source pair to reach downstream circuitry through matched analog paths. The improved channel matching of 8 ohms maximum and flatness of 9 ohms maximum support consistent behavior across the selected inputs, and operation up to ±20 V accommodates bipolar signals within the stated range. Care is required when the two sections do not switch simultaneously, because mismatched timing can create transient differential imbalance. Firmware or control logic should coordinate address and enable transitions, and PCB routing should maintain closely matched geometry for the paired channels.

अनुशंसित उत्पादों का सारांश

DG409CUE+ Maxim Integrated उपयोग में: Battery Monitoring Systems, Data Acquisition Front Ends, Test and Measurement Routing, Industrial Control Signal Multiplexing, Sample-and-Hold Systems, Balanced Differential Signal Routing DG409CUE Closely related TSSOP ordering code उपयोग में: Battery Monitoring Systems, Data Acquisition Front Ends, Test and Measurement Routing, Industrial Control Signal Multiplexing, Sample-and-Hold Systems, Balanced Differential Signal Routing
What is the DG409CUE+?
The DG409CUE+ is a dual 4:1 CMOS analog multiplexer in a 16-pin TSSOP package. It contains two independent multiplexers, each of which can connect one of four analog terminals to a common terminal through digital address and enable controls. According to the Maxim Integrated DG409 datasheet, its maximum on-resistance is 100 ohms, and it operates from single supplies up to +30 V or dual supplies up to ±20 V.
What is the on-resistance of the DG409CUE+?
The DG409CUE+ has a maximum on-resistance of 100 ohms. This figure describes the resistance of a closed analog switch and determines how much the device attenuates the routed signal. The Maxim Integrated DG409 datasheet also specifies improved channel matching of 8 ohms maximum and flatness over the signal range of 9 ohms maximum, helping preserve amplitude consistency when different channels are selected.
What supply voltage does the DG409CUE+ support?
The DG409CUE+ supports single-supply operation up to +30 V and dual-supply operation up to ±20 V. According to the Maxim Integrated DG409 datasheet, these ranges allow the two multiplexers to route signals near ground, from a single positive rail, or across a bipolar signal range. The selected operating mode must remain within the limits shown for the device, including its control-logic levels.
Where can I download the DG409CUE+ datasheet PDF?
The DG409CUE+ datasheet and product resources are available from the Maxim Integrated DG409 page at Analog Devices. The DG409 data sheet identifies the device as an improved, 8-channel or dual 4-channel CMOS analog multiplexer and includes its ordering information, electrical characteristics, and application details. Use the manufacturer's DG409 page for the current document and verify the ordering code before placing a component.
Where can I find the DG409CUE+ pinout?
The DG409CUE+ pin assignment is shown in the Maxim Integrated DG409 data sheet under the package and pin-description information for the 16-pin TSSOP option. The device uses two multiplexers and requires power, ground, address, enable, and analog-terminal assignments. Assign PCB nets directly from that pin-description table rather than relying on a package outline alone, especially when either common terminal must operate bidirectionally.
Is the DG409CUE+ in stock?
Current inventory and delivery status can change, so use the Request a Quote form on this page for an availability check tied to the exact DG409CUE+ ordering code. The manufacturer identifies the DG409 family as production, and distributor listings include the 16-TSSOP version. When requesting a quote, specify the required quantity, tube or tape-and-reel packaging preference, and delivery schedule.
What is the lead time for the DG409CUE+?
The current lead time depends on inventory, order quantity, and the requested delivery schedule. Use the Request a Quote form on this page and provide the required quantity and packaging preference for a lead-time confirmation. The device is offered in tube packaging, but a shipment-level commitment should be obtained for the exact order rather than inferred from a general product-page availability statement.
Where can I buy the DG409CUE+ online?
Use the Request a Quote form on this page to request the exact Maxim Integrated DG409CUE+ in the required package and quantity. The product is identified as a 2-circuit, 4:1, 100-ohm analog switch IC in a 16-pin TSSOP package. Quote requests help confirm current allocation, lead time, and shipment configuration for production or prototype builds.
What is the difference between DG409CUE+ and DG409CUE?
The DG409CUE+ and DG409CUE are closely related Maxim Integrated DG409 order codes, but their ordering suffixes define separate catalog entries that can carry different qualification or packaging terms. Both are associated with the 16-pin TSSOP implementation. Before substitution, compare the temperature grade, lead-free status, package orientation, and acquisition code in the manufacturer ordering table.
What is the best drop-in replacement for the DG409CUE+?
The closest same-package candidate identified for the DG409CUE+ is the Maxim Integrated DG409CUE, which uses the same TSSOP-16 footprint and 4:1 multiplexer architecture. Confirm its ordering suffix and electrical limits in the manufacturer ordering table before replacing the part. The DG409DY-T1-E3 is not a physical drop-in for the TSSOP-16 target because it is offered in a 16-SOIC package.
Can the Vishay DG409DY-T1-E3 replace the DG409CUE+?
The Vishay DG409DY-T1-E3 cannot be treated as a physical drop-in replacement for the DG409CUE+ because the available listing identifies a 16-SOIC package rather than the target's 16-TSSOP package. Although both are associated with the DG409-style 4:1 multiplexing function, changing package geometry requires a PCB footprint change. It may therefore serve as a functional reference, but not a same-land-pattern substitute.
Is the DG409CUE+ suitable for battery monitoring?
The DG409CUE+ is suitable for routed battery-monitoring measurements when the signals remain within its +30 V single-supply or ±20 V dual-supply limits. Its 100-ohm maximum on-resistance, 8-ohm maximum channel matching, and 9-ohm maximum flatness help limit channel-dependent measurement variation. A higher-impedance sensing path may be required when switch resistance is a significant fraction of the source impedance.
When should I choose the DG409CUE+ for a data-acquisition system?
Choose the DG409CUE+ when a board needs two coordinated 4:1 analog selections in one 16-pin TSSOP device. Its maximum on-resistance of 100 ohms, channel matching of 8 ohms maximum, and signal-range flatness of 9 ohms maximum suit low-frequency measurement signals. Confirm that the source impedance, settling time, bandwidth, and control logic remain compatible with those characteristics.
What are the key specifications engineers should know about the DG409CUE+?
The key DG409CUE+ specifications are two 4:1 CMOS multiplexers, 100-ohm maximum on-resistance, 8-ohm maximum channel matching, 9-ohm maximum flatness, +30 V single-supply operation, ±20 V dual-supply operation, and greater-than-2,000 V ESD protection. The Maxim Integrated DG409 datasheet places these characteristics in a 16-pin TSSOP package designed for production surface-mount assembly.
What can replace the DG409CUE+?
A valid replacement must reproduce the 16-pin TSSOP land pattern, pin functions, address and enable logic, and key electrical limits. The Maxim Integrated DG409CUE is the closest identified same-package option, while the Vishay DG409DY-T1-E3 uses a different 16-SOIC package and is not a physical drop-in. Verify the ordering table and application requirements before approving any substitution.

के लिए इंजीनियरिंग संदर्भ डेटा DG409CUE+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the DG409CUE+ when the design requires two 4:1 analog routing sections in a 16-pin TSSOP package and the signals remain within the +30 V single-supply or ±20 V dual-supply limits. It is particularly suitable for battery monitoring, data acquisition, and paired signal routing where the 100-ohm maximum on-resistance is acceptable relative to the source impedance. Select DG409CUE when its ordering-suffix and qualification terms satisfy the production requirements and it is qualified for the intended PCB. The Vishay DG409DY-T1-E3 is a functional reference for a similar 4:1 topology, but its 16-SOIC package requires a different footprint and is not a physical drop-in replacement. For high-frequency signals, very low source impedance requirements, or applications requiring very low on-resistance, review a higher-performance multiplexer architecture rather than assuming this TSSOP device is suitable.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद DG409CUE
Brand Maxim Integrated Maxim Integrated
Package 16-pin TSSOP 16-pin TSSOP - same
Multiplexer Configuration Dual 4:1 Dual 4:1
Number of Circuits 2 circuits 2 circuits
On-Resistance 100 ohms maximum 100 ohms maximum
Channel Matching 8 ohms maximum 8 ohms maximum
Flatness Over Signal Range 9 ohms maximum 9 ohms maximum
Single-Supply Operation Up to +30 V Up to +30 V
Dual-Supply Operation Up to ±20 V Up to ±20 V
ESD Protection Greater than 2,000 V per MIL-STD-883 Method 2002 Greater than 2,000 V per MIL-STD-883 Method 2002
Technology CMOS CMOS

मुख्य विशेषताएँ

  • Two independent multiplexers in one package (बनामDG409DY-T1-E3)
  • Specified channel consistency for measurement routing (बनामDG409DY-T1-E3)
  • Broad analog operating range (बनामDG409DY-T1-E3)

डिज़ाइन नोट्स

Route each analog terminal directly to its intended connector, sensor, or measurement circuit and keep the DG409CUE+ close to the selected circuitry. The device's maximum on-resistance is 100 ohms, so long PCB traces can become significant when the source impedance is high. Use a continuous ground plane, avoid splits beneath the TSSOP-16 footprint, and place supply bypassing close to the power pins. Keep the address and enable routes away from sensitive analog paths to reduce capacitive coupling during switching.

Coordinate address and enable timing when both multiplexer sections carry a differential signal. Changing only one section's selection can create a temporary voltage difference between the paired paths. Apply address and enable signals with suitable rise and fall times, and observe the device's control requirements in the Maxim Integrated DG409 datasheet. If the circuit samples immediately after a channel change, allow for the complete switching and settling interval rather than sampling in the transition region.

Do not treat the TSSOP-16 and SOIC-16 DG409 order codes as interchangeable land patterns. The Vishay DG409DY-T1-E3 listing identifies a 16-SOIC package, while the DG409CUE+ uses a 16-pin TSSOP footprint. In addition, confirm that the source impedance is high enough relative to the 100-ohm maximum on-resistance or compensate for the resulting attenuation. Finally, verify single- and dual-supply limits before applying bipolar signals.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

MIL-STD-883 Method 2002 ESD protection is specified, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the available product information.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

DG409CUE+ DG409CUE+ datasheet DG409CUE+ pinout DG409CUE+ datasheet pdf DG409CUE+ equivalent DG409CUE+ replacement DG409CUE+ price DG409CUE+ stock Maxim Integrated DG409CUE+ DG409CUE+ 16 TSSOP pinout DG409CUE+ battery monitoring DG409CUE+ vs DG409DY-T1-E3

संबंधित कंपोनेंट्स और शब्द

Maxim Integrated Analog Devices DG409CUE+ DG409CUE DG409DY-T1-E3 CMOS analog multiplexer analog multiplexer analog switch interface IC 4:1 multiplexer dual multiplexer on-resistance channel matching flatness bidirectional analog conduction TSSOP-16 TSSOP package family surface-mount package battery monitoring data acquisition sample-and-hold differential signal routing MIL-STD-883 Method 2002 ESD protection single-supply operation dual-supply operation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें