Texas Instruments

DS90CR583MTDX - 65 MHz 28-Bit LVDS Transmitter | TI

MPN: DS90CR583MTDX ✓ सक्रिय
TSSOP Package 65 MHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

DS90CR583MTDX अवलोकन

The Texas Instruments DS90CR583MTDX is a 65 MHz LVDS flat-panel-display link transmitter that converts 28 bits of CMOS/TTL input into four differential LVDS data streams and a fifth differential clock link. It is packaged in a 56-terminal gull-wing TSSOP with a commercial temperature grade. The device is designed for parallel-to-LVDS conversion in LCD and flat-panel display systems where a multi-lane serial interface reduces the number of traces required between the display controller and panel.

An LVDS interface, also called Low Voltage Differential Signaling, is a high-speed electrical interface that transmits data through differential current pairs. Differential signaling improves noise immunity because the receiver evaluates the voltage difference between two conductors rather than the voltage of either conductor relative to ground. In this category, a line driver converts parallel logic into a low-voltage differential serial signal, while a corresponding line receiver reconstructs the parallel data.

The DS90CR583 transmitter samples 28 CMOS/TTL data bits during every cycle of its transmitted clock. Four LVDS pairs carry the converted data, and a separate LVDS link carries the phase-locked transmit clock. This organization supports a 65 MHz LVDS 24-bit color flat-panel-display link while preserving a parallel source interface for the graphics or display controller.

The implementation uses a phase-locked transmit clock so that the data lanes and clock lane remain aligned during transmission. Because the clock is transferred in parallel with the data streams, the receiving system can recover the transmitted word boundaries from the differential interface rather than relying on a separate source-synchronous clock conductor from the transmitter.

Typical applications include LCD monitor panels, industrial HMIs, automotive display links, point-of-sale terminals, and other controller-to-panel assemblies that use a 28-bit parallel pixel bus and an LVDS display link. The transmitter is normally paired with a DS90CR584-family receiver at the panel end. System designers must also provide compatible input and output circuitry, controlled-impedance routing, and connector or cable structures suitable for low-voltage differential signaling.

The main design consideration is that a panel cable and receiver must match the transmitter's data-lane count, clock arrangement, and signaling standard. Review the pin-description table, recommended decoupling, and LVDS routing guidance in the manufacturer datasheet before assigning PCB tracks or laying out the interface.

This page consolidates the interface architecture, verified package information, application guidance, design notes, and drop-in replacement considerations to help engineers evaluate the DS90CR583MTDX before integrating it into a flat-panel-display link.

के लिए ड्रॉप-इन विकल्प DS90CR583MTDX — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं DS90CR583MTDX (समान फॉर्म फैक्टर और फुटप्रिंट).

DS90CR285MTDX

✅ ड्रॉप-इन
📦 TSSOP-56
Maximum link clock increases from 65 MHz to 66 MHz, and the receiver/clocking architecture must be confirmed before substitution

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

DS90CR583MTDX विशेषताएं

Device Type LVDS flat-panel-display link transmitter
Manufacturer Texas Instruments
Maximum Link Clock Frequency 65 MHz
Parallel Input Width 28 bits
Input Logic CMOS/TTL
LVDS Data Streams 4 differential data links
Clock Link 1 fifth LVDS link carrying the phase-locked transmit clock
Output Signaling LVDS (Low Voltage Differential Signaling)
Display Link Type LVDS 24-bit color flat-panel-display link
Temperature Grade Commercial
Package Code TSSOP
Number of Terminals 56 terminals
Terminal Form Gull wing
Package Shape Rectangular
माउंटिंग प्रकार Surface mount
श्रेणी Line driver / receiver
Data Sampling 28 input bits sampled every transmit-clock cycle

DS90CR583MTDX rectangular पिन कॉन्फ़िगरेशन गाइड

DS90CR583MTDX (rectangular पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

DS90CR583MTDX के लिए rectangular पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: DS90CR583MTDX.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

DS90CR583MTDX के लिए उपयुक्त है 6 अनुप्रयोगs: LCD Monitor Panel Interfaces, Industrial Human-Machine Interfaces, Point-of-Sale Terminal Displays, Automotive Display Prototyping, Video Game and Kiosk Panels, Flat-Panel Display Test Equipment.

📺

LCD Monitor Panel Interfaces

The DS90CR583MTDX fits controller-to-panel links in LCD monitors because it accepts 28 parallel CMOS/TTL bits and converts them into four LVDS data streams operating at up to 65 MHz. The transmitter also sends a phase-locked clock over the fifth differential link, allowing the panel receiver to recover data alignment. This arrangement replaces many parallel pixel traces with controlled-impedance differential routing, although the exact panel controller and receiver must support the same link format.

🏭

Industrial Human-Machine Interfaces

Industrial HMIs often place a graphics processor several centimeters from a touch display, making the DS90CR583MTDX suitable for a compact differential connection. Its 65 MHz four-data-lane LVDS output carries 28 sampled input bits per transmit-clock cycle and places the clock on a separate differential pair. Designers should use the manufacturer’s routing guidance and confirm the commercial temperature grade against the enclosure’s actual thermal environment.

🖥️

Point-of-Sale Terminal Displays

Point-of-sale terminals can use the DS90CR583MTDX to connect a display engine to a smaller LCD panel while preserving a wide 28-bit parallel input interface. The resulting four LVDS data pairs plus clock pair reduce PCB routing congestion and support a 65 MHz clocked display link. The receiver, display timing, connector wiring, and cable characteristics must be matched to the transmitter rather than selected only by nominal data rate.

🚗

Automotive Display Prototyping

The DS90CR583MTDX can support prototype automotive display links where a 28-bit parallel controller output must reach a remote panel over LVDS. Its 65 MHz transmitter architecture and separate clock link are appropriate for evaluating panel timing and connector behavior. Because the device is listed with a commercial temperature grade, production automotive use requires confirmation of the correct ordering variant, temperature limits, qualification status, and lifecycle commitments.

🎮

Video Game and Kiosk Panels

Compact displays in kiosks, gaming systems, and control panels benefit from the DS90CR583MTDX when the native graphics engine supplies 28 parallel data bits. The transmitter converts those bits into four LVDS pairs and a dedicated clock pair at a 65 MHz link clock, which can simplify enclosure cabling and reduce board area compared with a long parallel bus. Signal-integrity validation remains essential because panel timing, skew, and connector geometry determine usable display reliability.

🔧

Flat-Panel Display Test Equipment

The DS90CR583MTDX is useful in test systems that emulate or exercise 28-bit-to-LVDS panel links at up to 65 MHz. Engineers can use it to generate four differential data streams and a separate phase-locked clock for cable, connector, and receiver characterization. Calibration equipment must match the link’s electrical conventions, and test fixtures should preserve controlled-impedance routing to avoid mistaking fixture reflections for transmitter or panel failures.

अनुशंसित उत्पादों का सारांश

DS90CR584MTDX Texas Instruments उपयोग में: LCD Monitor Panel Interfaces, Industrial Human-Machine Interfaces, Point-of-Sale Terminal Displays, Automotive Display Prototyping, Video Game and Kiosk Panels, Flat-Panel Display Test Equipment DS90CR285MTDX Related TI 28-bit LVDS transmitter उपयोग में: LCD Monitor Panel Interfaces, Industrial Human-Machine Interfaces, Point-of-Sale Terminal Displays, Automotive Display Prototyping, Video Game and Kiosk Panels, Flat-Panel Display Test Equipment
What is the DS90CR583MTDX used for?
The DS90CR583MTDX is a 65 MHz LVDS transmitter for 24-bit color flat-panel-display links. It accepts 28 parallel CMOS/TTL input bits, converts them into four differential LVDS data streams, and transmits a phase-locked clock over a fifth differential link. The device is typically used between a display controller and a remote LCD receiver, reducing parallel routing into a low-voltage differential cable connection.
How many LVDS data outputs does DS90CR583MTDX provide?
The DS90CR583MTDX provides four differential LVDS data streams plus a fifth LVDS link for the phase-locked transmit clock. Each transmitted clock cycle carries 28 sampled input bits across the four data lanes. The separate clock link allows the receiver to recover word boundaries from the differential clock rather than requiring an additional transmitter-to-receiver clock trace.
What is the maximum clock frequency of the DS90CR583MTDX?
The DS90CR583MTDX supports a 65 MHz LVDS 24-bit color flat-panel-display link. According to the National Semiconductor and Texas Instruments device documentation, 28 bits of CMOS/TTL data are sampled during every transmit-clock cycle and converted into four LVDS data streams, with the phase-locked clock carried in parallel over a fifth LVDS link.
Where can I find the DS90CR583MTDX datasheet PDF?
The DS90CR583MTDX datasheet is titled “DS90CR583/DS90CR584 LVDS 24-Bit Color Flat Panel Display (FPD) Link—65 MHz.” A downloadable copy is linked on this page through the device documentation entry. The document covers the transmitter, the companion DS90CR584 receiver, pin descriptions, operating information, and recommended application circuits for the complete display-link system.
What receiver pairs with the DS90CR583MTDX?
The DS90CR584 is the receiver specified for the same LVDS 24-bit color flat-panel-display link. The DS90CR583 transmitter converts 28 parallel CMOS/TTL bits into four LVDS data streams and a clock stream, while the DS90CR584 receiver converts those differential streams back into parallel CMOS/TTL data. Confirm connector pin assignment and cable routing against both devices’ application information before assembly.
What package does the DS90CR583MTDX use?
The DS90CR583MTDX is packaged in a 56-terminal gull-wing TSSOP with a rectangular package shape and surface-mount construction. The commercial temperature grade identifies its intended operating class. Use the manufacturer’s pin-description table for the exact terminal assignments because the 56-lead package includes power, ground, clock, data, and configuration connections.
Is DS90CR583MTDX pin compatible with DS90CR583MTD?
The DS90CR583MTD and DS90CR583MTDX are closely related ordering variants listed in 56-terminal TSSOP form, but the suffix difference should be confirmed as a commercial versus extended-temperature ordering code before substitution. The package marking, specified temperature grade, and orderable-part status must match the requirements of the original assembly. The X variant’s price is not published here because a current qualified listing is required.
What can replace the DS90CR583MTDX in an existing PCB?
A valid replacement must match the 56-terminal TSSOP footprint, the 28-bit parallel input interface, four LVDS data lanes plus a clock lane, and the 65 MHz link requirement. No second-source drop-in equivalent could be confirmed from the available manufacturer and distributor records, so PCB reuse should not be assumed without engineering review. Compare the candidate’s pin-description table, clocking method, electrical limits, and display-link timing before approving a substitution.
When should I choose the DS90CR583MTDX over a generic LVDS transmitter?
Choose the DS90CR583MTDX when the display system already uses a 28-bit parallel CMOS/TTL source and a 65 MHz four-data-lane LVDS panel link with a fifth clock lane. A generic serializer may use a different lane count, encoding, clock architecture, connector mapping, or receiver ecosystem, so its internal ICs are not automatically interchangeable even when the data rate appears similar.
Is the DS90CR583MTDX suitable for an automotive display?
The DS90CR583MTDX is identified as a commercial-temperature-grade line driver, so it should not be assumed to meet automotive qualification requirements. For a vehicle display, verify the exact ordering option, temperature range, AEC-Q100 status, production status, and any automotive qualification documentation with the manufacturer. If those requirements are not met, select an automotive-qualified display-link device rather than substituting by package alone.
How do I lay out an LVDS link using the DS90CR583MTDX?
Route each differential LVDS pair as a tightly coupled pair with continuous reference-plane support and minimize layer transitions and stubs. Keep the four data pairs and the clock pair physically consistent in length to limit timing skew, and follow the manufacturer’s recommended decoupling and interface-layout diagrams. Cable and connector transitions must preserve controlled-impedance differential behavior rather than treating each signal as an independent single-ended route.
Where can I buy the DS90CR583MTDX and check current availability?
Current availability, order quantity, and lead time for the DS90CR583MTDX should be confirmed through the Request a Quote form on this page. The form allows the exact MPN and required quantity to be submitted for a current commercial response. Because lead time and inventory can change without notice, a request is more reliable than relying on an archived distributor page or an unconfirmed stock statement.
What is the price of the DS90CR583MTDX?
Use the Request a Quote form on this page to request the current price and quantity break for the DS90CR583MTDX. The device is a specialized 56-terminal TSSOP LVDS transmitter, and commercial pricing can vary with order volume, packaging requirement, date, and market conditions. A current quote provides a binding response for the exact MPN and the quantity your production program requires.
How long is the lead time for the DS90CR583MTDX?
The current lead time for DS90CR583MTDX should be requested through the Request a Quote form on this page. Quote requests can specify the annual and initial quantities needed for planning, along with the required shipping destination. For obsolete or constrained components, a single-request lead-time statement should also be validated against the manufacturer’s lifecycle status before the BOM is released.
What are the key specifications of DS90CR583MTDX that engineers should know?
The DS90CR583MTDX is a 65 MHz LVDS display-link transmitter with a 28-bit CMOS/TTL input, four differential LVDS data outputs, one differential clock output, and a 56-terminal gull-wing TSSOP package. The transmitter samples all 28 input bits each clock cycle and sends the phase-locked clock in parallel with the data. It is classified as a commercial-grade line driver for 24-bit color flat-panel-display links.
How does DS90CR583MTDX compare with DS90CR285MTDX?
The DS90CR285 is described by Texas Instruments as a 3.3 V rising-edge data-strobe LVDS 28-bit channel-link transmitter operating up to 66 MHz, while the DS90CR583MTDX is a 65 MHz 24-bit color flat-panel-display transmitter. Both use an LVDS 28-bit transmitter concept, but clocking, voltage, link organization, and receiver compatibility must be checked before considering a board-level substitution.

के लिए इंजीनियरिंग संदर्भ डेटा DS90CR583MTDX — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the DS90CR583MTDX when the display architecture already uses a 28-bit parallel CMOS/TTL source, four LVDS data lanes, a separate fifth clock lane, and a receiver designed for the 65 MHz flat-panel-display link. It is a direct fit for controller-to-LCD and controller-to-HMI cable connections where reducing parallel traces is important. The related DS90CR285MTDX may suit a 66 MHz rising-edge data-strobe design, but it should not replace the DS90CR583MTDX without checking clock style, supply voltage, and receiver compatibility. Do not approve a board substitution based only on the shared TSSOP package. If the system uses a different serializer architecture, lane count, or clocking method, redesigning around the appropriate transmitter is usually safer than forcing an electrically similar part into an incompatible link.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद DS90CR285MTDX
Brand Texas Instruments Texas Instruments
Package 56-terminal TSSOP TSSOP-56 - same package family
Device Type LVDS flat-panel-display link transmitter 28-bit LVDS channel-link transmitter
Maximum Link Clock 65 MHz 66 MHz
Parallel Input Width 28 bits 28 bits
Output Signaling LVDS LVDS
Clock Style Phase-locked transmit clock on a fifth LVDS link Rising-edge data-strobe channel link
Primary Application 24-bit color flat-panel-display link 28-bit channel-link transmission

मुख्य विशेषताएँ

  • Dedicated fifth LVDS clock link (बनामDS90CR285MTDX)
  • Direct 28-bit parallel display input (बनामDS90CR285MTDX)
  • Established 56-terminal TSSOP interface (बनामDS90CR285MTDX)

डिज़ाइन नोट्स

Treat the five LVDS pairs as controlled-impedance differential nets. Route each pair together, maintain a continuous reference plane, and avoid long stubs, excessive vias, and unnecessary layer changes. Keep data-to-clock skew within the link’s timing budget and follow the manufacturer’s recommended interface layout. If the cable is significant, characterize both transmitter outputs and receiver thresholds at the panel end rather than relying only on source-side waveforms.

Place input decoupling and any required clock or configuration components close to their associated device terminals, following the pin-description table and recommended application circuit. Separate the LVDS output routing from sensitive analog or high-speed unrelated circuitry where practical. Verify connector and cable pin assignment so that the four data lanes, clock lane, grounds, and auxiliary connections correspond to the DS90CR584 receiver arrangement.

Do not substitute the part solely because another 28-bit LVDS transmitter uses a similar TSSOP package. Confirm terminal-by-terminal assignment, supply voltage, data-strobe or clock behavior, link timing, receiver compatibility, and connector mapping. The DS90CR583MTDX is a 65 MHz flat-panel-display transmitter, while related channel-link devices may use a different clock architecture or electrical interface even when the parallel data width is identical.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The device is identified as a commercial-temperature-grade line driver. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status for the exact orderable part before production release.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

DS90CR583MTDX datasheet DS90CR583MTDX datasheet pdf DS90CR583MTDX pinout DS90CR583MTDX replacement DS90CR583MTDX equivalent DS90CR583MTDX cross reference Texas Instruments DS90CR583MTDX DS90CR583 56 TSSOP transmitter DS90CR583MTDX LVDS display link DS90CR583MTDX vs DS90CR285MTDX DS90CR583MTDX price DS90CR583MTDX stock and lead time 65 MHz 28-bit LVDS transmitter DS90CR583MTDX schematic

संबंधित कंपोनेंट्स और शब्द

Texas Instruments DS90CR583MTDX DS90CR583 DS90CR584MTDX DS90CR285MTDX LVDS Low Voltage Differential Signaling line driver flat-panel-display link FPD link parallel-to-serial converter CMOS TTL phase-locked transmit clock 28-bit parallel input four differential data lanes fifth clock lane 65 MHz TSSOP-56 gull-wing package surface-mount IC display controller LCD panel controlled impedance differential signal integrity
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें