Silicon Labs

EFM32G890F32-BGA112 - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32G890F32-BGA112 ✓ सक्रिय
2.5 V or 3.3 V Vdss As low as 0.6 microamps Id 112-BGA, 10 mm x 10 mm Package 32 MHz Speed 32 KB Flash (32K x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

EFM32G890F32-BGA112 अवलोकन

Silicon Labs EFM32G890F32-BGA112 is a 32-bit ARM Cortex-M3 Gecko microcontroller operating at up to 32 MHz, with 32 KB of Flash memory, 8 KB of RAM, and 90 digital I/O pins in a 112-BGA package measuring 10 mm by 10 mm. The device is designed around the EFM32G energy-management platform, which combines low-power operation, fast wake-up behavior, and autonomous peripheral activity.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as serial interfaces, timers, and analog blocks. Within the product hierarchy, the EFM32G890F32 belongs to the ARM Cortex-M3 microcontroller class, the EFM32 Gecko family, and the broader embedded-control semiconductor category. Its combination of a 32-bit processor and low-power peripherals makes it suitable for battery-operated equipment and other embedded systems that must process data while limiting energy use.

The EFM32G890F32-BGA112 provides 32 KB of Flash program memory and 8 KB of SRAM, supporting firmware storage, working memory, and application state. Its listed digital interface resources include 90 I/O pins, three 16-bit timers, EBI/EMI, I2C, IrDA, SPI, SmartCard, and UART/USART connectivity. These interfaces allow the MCU to communicate with sensors, displays, external nonvolatile memory, transceivers, and other embedded peripherals without requiring multiple companion controllers.

Silicon Labs describes the EFM32G family as an energy-oriented platform with autonomous peripherals and low current draw in both active and sleep operating states. The family data sheet states that EFM32G devices can consume as little as 0.6 microamps in Stop mode and 180 microamps per megahertz in Run mode. These figures characterize the broader family and should be checked against the exact operating configuration, clock rate, and peripheral activity used in a finished design.

Typical uses include industrial sensor nodes, compact wireless-control equipment, battery-powered instruments, building-automation endpoints, wearable accessories, and low-power IoT controllers. In each case, the MCU can execute control logic while using its low-energy modes between external events. The 112-BGA package also supports compact PCB designs, although its fine pitch requires careful assembly planning, inspection access, and multilayer board construction.

Design the power rails and decoupling around the 3.3 V-class operating environment described for this device family, and use the pin-description tables in the manufacturer datasheet when assigning the 90 digital I/O pins. Confirm package ball assignments, exposed-pad treatment, supported supply tolerances, and peripheral multiplexing before release because those details are not reproduced in the product listing.

This product record combines the exact ordering information, memory configuration, package dimensions, core speed, interface list, and low-power family characteristics with practical considerations for PCB layout, firmware sizing, and sourcing. It also provides same-package alternatives and a parameter-by-parameter comparison so engineers can distinguish flash-capacity changes from true pin-compatible design choices.

के लिए ड्रॉप-इन विकल्प EFM32G890F32-BGA112 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं EFM32G890F32-BGA112 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न RAM.

EFM32G890F64-BGA112

✅ ड्रॉप-इन
Silicon Labs
📦 112-BGA (10x10)
32-bit ARM Cortex-M3 microcontroller · EFM32 Gecko · 32 MHz · ARM Cortex-M3 · 64 KB · 16 KB · 90 pins · 3 timers

कीमत के लिए संपर्क करें

डेटाशीट देखें →

EFM32G890F128-BGA112

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 112-BGA (10x10)
Flash increases from 32 KB to 128 KB (+300%) and RAM from 8 KB to 16 KB (+100%); CPU remains 32 MHz

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

EFM32G890F16-BGA112

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 112-BGA (10x10)
Flash decreases from 32 KB to 16 KB (-50%), making it unsuitable for the 70% drop-in parameter floor

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

EFM32G290F128-BGA112T

✅ ड्रॉप-इन
📦 112-BGA (10x10)
Flash increases from 32 KB to 128 KB (+300%); package, core speed, and 32-bit Cortex-M3 class remain aligned

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

EFM32G890F32-BGA112T

✅ ड्रॉप-इन
📦 112-BGA (10x10)
Core, memory, and electrical ratings are unchanged; ordering suffix distinguishes the tape-and-reel format

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

EFM32G890F32-BGA112 Maximum Ratings और Electrical Characteristics

Core Processor ARM Cortex-M3, 32-bit
Maximum CPU Frequency 32 MHz
Program Memory 32 KB Flash (32K x 8)
RAM 8 KB
Digital I/O Pins 90 pins
Timers 3 x 16-bit
पैकेज 112-BGA, 10 mm x 10 mm
Package Type Ball Grid Array
माउंटिंग प्रकार Surface Mount
सप्लाई वोल्टेज 2.5 V or 3.3 V
Stop Mode Current As low as 0.6 microamps
Run Mode Current 180 microamps per MHz
Serial Interfaces EBI/EMI, I2C, IrDA, SPI, SmartCard, UART/USART

EFM32G890F32-BGA112 ball grid array पिन कॉन्फ़िगरेशन गाइड

EFM32G890F32-BGA112 (ball grid array पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

EFM32G890F32-BGA112 के लिए ball grid array पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: EFM32G890F32-BGA112.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

EFM32G890F32-BGA112 के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Sensor Nodes, Industrial Monitoring and Control, Low-Power IoT Gateways, Portable Medical Accessories, Building Automation Endpoints, Wearable and Personal Devices.

🧩

Battery-Powered Sensor Nodes

The EFM32G890F32-BGA112 fits battery-powered sensor nodes because its ARM Cortex-M3 core handles acquisition and local control at up to 32 MHz, while the EFM32G family supports very low-power operation. The manufacturer EFM32G datasheet states that family devices can consume as little as 0.6 microamps in Stop mode. Use the 32 KB of Flash for compact firmware and the 8 KB of RAM for working buffers, then connect sensors through I2C or SPI. Design the duty cycle around measurement intervals because active current depends on processing time and enabled peripherals.

🏭

Industrial Monitoring and Control

The EFM32G890F32-BGA112 is suitable for industrial monitoring equipment that combines local control with several communication peripherals. Its listed connectivity includes UART/USART, SPI, I2C, IrDA, EBI/EMI, and SmartCard, while three 16-bit timers support periodic sampling, motor timing, or industrial pulse counting. The 32 MHz Cortex-M3 core provides responsive control without requiring a separate communications processor. For deployed systems, confirm operating-temperature limits, EMC requirements, and the exact supply range against the manufacturer datasheet before selecting the MCU for a production environment.

🌐

Low-Power IoT Gateways

The EFM32G890F32-BGA112 can serve as the local controller in a compact IoT gateway that wakes periodically, reads sensors, and forwards information through a serial radio or network module. Its 90 digital I/O pins provide substantial interface capacity, and the presence of UART/USART, SPI, I2C, and IrDA supports multiple peripheral styles. The family's Run-mode figure of 180 microamps per megahertz gives engineers a basis for comparing operating budgets, although actual consumption depends on the selected clock, active peripherals, and duty cycle.

💊

Portable Medical Accessories

The EFM32G890F32-BGA112 is appropriate for compact battery-powered accessories that perform simple control, logging, or communication rather than intensive diagnostic processing. Its low-power Gecko architecture helps separate standby consumption from active operation, and the 90 I/O pins can support buttons, indicators, sensors, and serial peripherals. A medical product design must still apply the applicable risk management, biocompatibility, electrical-safety, and validation processes for the finished device. Confirm the target temperature range and medical-market qualification status rather than inferring suitability from the MCU family name.

🏠

Building Automation Endpoints

The EFM32G890F32-BGA112 fits building-automation endpoints that combine room controls, sensor inputs, and communications over UART, I2C, or SPI. Its 90 I/O pins reduce the need for external digital expanders in connected room hardware, while the three 16-bit timers can support timing-intensive control tasks. The 112-BGA package supports compact equipment designs but requires a multilayer PCB, controlled assembly, and adequate escape routing. Validate relay-driver isolation, ESD requirements, and operating-temperature limits as separate system-level design requirements.

📱

Wearable and Personal Devices

The EFM32G890F32-BGA112 is suitable for wearable accessories and personal devices where a 32-bit processor, modest memory, and low-power modes are needed in a compact assembly. The 10 mm by 10 mm 112-BGA package reduces board area compared with many leaded packages, although its ball pitch complicates prototype soldering and inspection. Its 32 KB Flash can hold a focused firmware image, while UART, SPI, I2C, and IrDA allow connection to sensors and companion radio modules. Confirm package warpage, assembly capability, and operating-temperature requirements during hardware planning.

अनुशंसित उत्पादों का सारांश

EFM32G890F64-BGA112 Silicon Labs उपयोग में: Battery-Powered Sensor Nodes, Industrial Monitoring and Control, Low-Power IoT Gateways, Portable Medical Accessories, Building Automation Endpoints, Wearable and Personal Devices EFM32G890F128-BGA112 Same-package upgrade for larger firmware उपयोग में: Battery-Powered Sensor Nodes, Low-Power IoT Gateways EFM32G290F128-BGA112T Same-package high-memory family alternative उपयोग में: Industrial Monitoring and Control, Building Automation Endpoints EFM32G890F32-BGA112T Same-device tape-and-reel ordering option उपयोग में: Portable Medical Accessories, Wearable and Personal Devices
What is the EFM32G890F32-BGA112?
The EFM32G890F32-BGA112 is a 32-bit ARM Cortex-M3 Gecko microcontroller from Silicon Labs with a maximum clock speed of 32 MHz, 32 KB of Flash memory, 8 KB of RAM, and 90 digital I/O pins. According to the manufacturer EFM32G datasheet, the device uses the energy-oriented EFM32G platform and is suitable for battery-operated and other low-power embedded systems.
What are the key specifications of EFM32G890F32-BGA112?
The EFM32G890F32-BGA112 combines an ARM Cortex-M3 core, up to 32 MHz operation, 32 KB of Flash, 8 KB of RAM, and 90 digital I/O pins in a 112-BGA package. Its listed peripherals include three 16-bit timers plus EBI/EMI, I2C, IrDA, SPI, SmartCard, and UART/USART interfaces. The manufacturer EFM32G datasheet also identifies the device as part of the low-power Gecko family.
Where can I download the EFM32G890F32-BGA112 datasheet PDF?
The manufacturer EFM32G datasheet PDF is available from Silicon Labs at the product datasheet link on this page. It describes the F32, F64, and F128 family variants and provides the device-level information needed for clock, memory, peripheral, electrical, and package design. Use the manufacturer document rather than an unofficial copy when approving a production release.
Where can I find the EFM32G890F32-BGA112 pinout and ball assignments?
Use the EFM32G890 pin-description and package tables in the manufacturer EFM32G datasheet for the authoritative BGA112 ball assignments, peripheral multiplexing, power pins, and exposed-pad requirements. The product record confirms a 112-BGA package measuring 10 mm by 10 mm, but a complete numbered ball list is not reproduced here because the package diagram library does not contain a BGA-112 entry.
What is the difference between EFM32G890F32-BGA112 and EFM32G890F64-BGA112?
The primary documented difference is internal memory capacity. EFM32G890F32-BGA112 has 32 KB of Flash and 8 KB of RAM, while EFM32G890F64-BGA112 has 64 KB of Flash and 16 KB of RAM. Both use the same 112-BGA package and 32 MHz ARM Cortex-M3 platform. The F64 option is preferable when firmware or working-memory requirements exceed the F32 limits.
Is EFM32G890F32-BGA112 suitable for battery-powered IoT devices?
Yes, the EFM32G890F32-BGA112 is suitable for battery-powered IoT and embedded-control equipment when its low-power modes and peripheral set match the workload. According to the manufacturer EFM32G datasheet, the family can consume as little as 0.6 microamps in Stop mode and 180 microamps per megahertz in Run mode. Actual current depends on clock settings, active peripherals, and power-management configuration.
Can EFM32G890F64-BGA112 replace EFM32G890F32-BGA112?
EFM32G890F64-BGA112 can serve as a drop-in upgrade candidate because it retains the 112-BGA package and 32 MHz Cortex-M3 configuration while increasing Flash from 32 KB to 64 KB and RAM from 8 KB to 16 KB. The replacement should still be checked against the datasheet pin table, especially if the original design depends on a specific peripheral mapping or power configuration.
When should I choose EFM32G890F32-BGA112 instead of EFM32G890F64-BGA112?
Choose EFM32G890F32-BGA112 when 32 KB of Flash and 8 KB of RAM are sufficient and minimizing internal memory is a priority. Choose EFM32G890F64-BGA112 when code size, data buffering, firmware updates, or future feature expansion make the additional 32 KB of Flash and 8 KB of RAM valuable. Both preserve the same 112-BGA mechanical format and 32 MHz processor class.
What is the best drop-in replacement for EFM32G890F32-BGA112?
EFM32G890F64-BGA112 is the closest same-family drop-in upgrade identified from the manufacturer listings because it keeps the 112-BGA package and 32 MHz Cortex-M3 architecture while increasing memory to 64 KB Flash and 16 KB RAM. No universally interchangeable cross-brand replacement is established here. Verify pin multiplexing, timing, supply requirements, and qualification before approving any substitution.
Is EFM32G890F32-BGA112 the same as EFM32G890F32-BGA112T?
The EFM32G890F32-BGA112 and EFM32G890F32-BGA112T identify the same 112-BGA, 32 MHz Cortex-M3, 32 KB Flash microcontroller configuration, with the suffix distinguishing the shipping format or temperature-related ordering option. A suffix difference does not justify listing one as a separate engineering alternative because it adds packaging notation rather than a distinct electrical design.
Where can I buy EFM32G890F32-BGA112 online?
Use the Request a Quote form on this page to request EFM32G890F32-BGA112 availability, current lead time, and minimum order quantity. The exact ordering code identifies a 112-BGA Silicon Labs microcontroller with 32 KB Flash, 8 KB RAM, and a 32 MHz ARM Cortex-M3 core. Confirm the suffix, package condition, and shipment quantity when submitting the request.
What is the price of EFM32G890F32-BGA112?
Current price and quantity breaks for EFM32G890F32-BGA112 should be obtained through the Request a Quote form on this page. The pricing shown in structured distributor listings did not include explicit quantity-break prices for this exact ordering code, so no price amount is asserted. The quote request can also confirm stock status, lead time, and approved order quantities.
What is the lead time for EFM32G890F32-BGA112?
The current lead time for EFM32G890F32-BGA112 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and inventory availability. The listing identifies the part as a 112-BGA, 32 MHz Cortex-M3 device with 32 KB Flash and 8 KB RAM, but it does not publish a guaranteed delivery interval.
Is EFM32G890F32-BGA112 in stock?
Current stock for EFM32G890F32-BGA112 is best confirmed through the Request a Quote form on this page. Submit the required quantity and exact ordering code so the fulfillment team can check allocation and shipment timing. Because stock changes independently of technical specifications, no fixed availability statement should be inferred from the manufacturer or distributor listing.
What is the best Silicon Labs equivalent for EFM32G890F32-BGA112?
EFM32G890F64-BGA112 is the best documented same-brand equivalent candidate because it uses the same 112-BGA package and 32 MHz Cortex-M3 platform, but provides 64 KB Flash and 16 KB RAM instead of 32 KB Flash and 8 KB RAM. EFM32G890F128-BGA112 adds a larger memory option in the same family. Confirm the ball-level pin assignments and firmware implications before selecting either upgrade.

के लिए इंजीनियरिंग संदर्भ डेटा EFM32G890F32-BGA112 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose EFM32G890F32-BGA112 when 32 KB of Flash, 8 KB of RAM, and 90 I/O pins are sufficient for a compact, energy-conscious ARM Cortex-M3 design. EFM32G890F64-BGA112 is the practical same-package upgrade when larger firmware, more buffering, or over-the-air update images require 64 KB Flash and 16 KB RAM. EFM32G890F128-BGA112 offers still more program space for protocol-heavy products. EFM32G890F16-BGA112 reduces memory and is unsuitable when the F32 firmware no longer fits. EFM32G290F128-BGA112T and EFM32G890F32-BGA112T are additional ordering or family options that require ball-level and peripheral comparison before substitution. No cross-brand drop-in candidate is established, so software portability, pin multiplexing, timing, and qualification remain the decisive checks.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद EFM32G890F64-BGA112 EFM32G890F128-BGA112 EFM32G890F16-BGA112 EFM32G290F128-BGA112T EFM32G890F32-BGA112T
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 112-BGA (10x10) 112-BGA (10x10) 112-BGA (10x10) 112-BGA (10x10) 112-BGA (10x10) 112-BGA (10x10)
Core Processor ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 64 KB 128 KB 16 KB 128 KB 32 KB

मुख्य विशेषताएँ

  • Balanced memory configuration (बनामEFM32G890F16-BGA112)
  • Lower memory demand than the F64 option (बनामEFM32G890F64-BGA112)
  • Direct same-package configuration match (बनामEFM32G890F32-BGA112T)

डिज़ाइन नोट्स

Design the PCB and assembly process around the 112-BGA, 10 mm by 10 mm package. Use a multilayer board with a solid ground plane, route escape traces between ball rows, and provide adequate thermal and copper support beneath the device. Confirm pad geometry, solder-mask definition, paste volume, and package tolerances using the manufacturer land-pattern and assembly guidance before fabrication.

Follow the manufacturer recommendations for supply voltage, decoupling, power sequencing, and exposed-pad connection. Place the required bulk and high-frequency capacitors close to the relevant supply balls, with a short return path to the ground plane. Validate brownout behavior, startup sequencing, and current peaks caused by enabled peripherals rather than relying only on the nominal Run-mode current.

Assign every ball through the manufacturer pin-description table, including alternate peripheral functions, debug signals, clock sources, and supply pins. Leave programming and debug access available on the board, isolate analog-sensitive routes from switching nodes, and use solid reference planes for high-speed interfaces. A valid schematic symbol is not enough; the PCB footprint and ball map must correspond to the exact BGA ordering code.

Avoid treating the family-level current figures as exact product guarantees. The 0.6-microamp Stop-mode and 180-microamps-per-MHz Run-mode figures depend on the operating configuration. Measure the full sleep, wake, active, and peripheral-load sequence, then size the battery and regulator for peak current. Also avoid assuming that a memory-capacity change preserves every peripheral function without comparing the relevant datasheet tables.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance attributes are not stated in the available product records and have therefore not been inferred.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

EFM32G890F32-BGA112 datasheet EFM32G890F32-BGA112 pinout EFM32G890F32-BGA112 datasheet pdf EFM32G890F32-BGA112 equivalent EFM32G890F32-BGA112 replacement EFM32G890F32-BGA112 cross reference EFM32G890F32-BGA112 footprint EFM32G890F32-BGA112 schematic EFM32G890F32-BGA112 price EFM32G890F32-BGA112 stock Silicon Labs EFM32G890F32-BGA112 EFM32G890F32-BGA112 32MHz 8KB RAM EFM32G890F32-BGA112 vs EFM32G890F64-BGA112 EFM32G890F32 battery powered sensor

संबंधित कंपोनेंट्स और शब्द

Silicon Labs EFM32G890F32-BGA112 EFM32G890F64-BGA112 EFM32G890F128-BGA112 EFM32G890F16-BGA112 EFM32G290F128-BGA112T EFM32G890F32-BGA112T ARM Cortex-M3 microcontroller MCU embedded controller system-on-chip semiconductor EFM32 Gecko Flash memory RAM UART/USART SPI I2C IrDA EBI/EMI SmartCard 112-BGA ball grid array surface mount IoT industrial control battery-powered systems low-power mode Stop mode Run mode digital I/O 16-bit timer
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें