EFM32TG842F16-QFP64T - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG842F16-QFP64T ✓ सक्रियEFM32TG842F16-QFP64T अवलोकन
An ARM Cortex-M3 microcontroller is a compact embedded processor used to control sensors, communications, display, and industrial equipment. The Cortex-M3 combines a 32-bit reduced-instruction-set computer core with interrupt handling, memory-protection features, and low-power operating states. Within the semiconductor hierarchy, the EFM32TG842 belongs to the EFM32 Tiny Gecko family of energy-sensitive 32-bit microcontrollers.
The device combines 16 kB Flash, 4 kB RAM, 53 digital I/O pins, and two 16-bit timers in a 10 mm by 10 mm TQFP package. Its integrated peripherals include DMA, I2S, LCD support, brown-out detection and reset, power-on reset, pulse-width modulation, and a watchdog timer. Conversion resources include eight 12-bit analog-to-digital converter channels and one 12-bit digital-to-analog converter channel.
The 32 MHz Cortex-M3 core provides sufficient processing throughput for protocol handling, control loops, data acquisition, and user-interface support while retaining multiple low-energy modes and fast wake-up behavior. Its 4 kB RAM limits the amount of simultaneous application data, but the integrated Flash and peripheral set support compact embedded designs that do not require external memory.
Typical uses include industrial sensor nodes, building-control equipment, battery-powered instruments, connected measurement devices, and compact human-machine interfaces. The combination of a 3.3 V-compatible supply range, 53 I/O pins, 12-bit ADC channels, and low-power architecture is particularly useful when one compact package must handle analog measurement and multiple digital interfaces.
PCB design should preserve a continuous ground reference beneath the TQFP and place decoupling capacitors close to the supply pins. Firmware must also account for the limited 16 kB Flash and 4 kB RAM budgets. Analog signal routing should be separated from high-current switching paths to reduce coupling into the ADC inputs.
This product record combines manufacturer specifications, package and sourcing details, practical design guidance, and a parameter-by-parameter comparison with compatible EFM32Tiny Gecko options. It is intended to help engineers confirm electrical limits, memory capacity, pin compatibility, and application suitability before starting an embedded design.
के लिए ड्रॉप-इन विकल्प EFM32TG842F16-QFP64T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं EFM32TG842F16-QFP64T (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Memory, Package, Processor Core, RAM, Timers.
EFM32TG842F8-QFP64T
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →EFM32TG842F32-QFP64T
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
EFM32TG840F16-QFP64T
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
EFM32TG841F16-QFP64T
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
EFM32TG842F64-QFP64T
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
EFM32TG842F16-QFP64T Maximum Ratings और Electrical Characteristics
| Processor Core | ARM Cortex-M3, 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 kB |
| RAM | 4 kB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit |
| ऑपरेटिंग सप्लाई वोल्टेज | 1.85 V to 3.8 V |
| Nominal Supply Levels | 2.5 V and 3.3 V |
| ऑपरेटिंग तापमान | -40°C to 85°C |
| ADC | 8 channels x 12-bit |
| DAC | 1 channel x 12-bit |
| पैकेज | 64-TQFP, 10 mm x 10 mm |
| माउंटिंग प्रकार | Surface mount |
| पिन काउंट | 64 pins |
| Integrated Peripherals | DMA, I2S, LCD, PWM, and watchdog timer |
| Protection Features | Brown-out detection and power-on reset |
| Low-Power Features | Energy-saving modes with fast wake-up |
EFM32TG842F16-QFP64T 64-tqfp, 10 mm x 10 mm पिन कॉन्फ़िगरेशन गाइड
EFM32TG842F16-QFP64T (64-tqfp, 10 mm x 10 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: EFM32TG842F16-QFP64T.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
EFM32TG842F16-QFP64T के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Node, Connected Measurement Device, Building Control Module, Battery-Powered Handheld Instrument, Digital Audio Control Board, Motor and Actuator Control.
Industrial Sensor Node
The EFM32TG842F16-QFP64T fits compact industrial sensor nodes that require many digital inputs, local analog measurement, and low standby consumption. Its 53 digital I/O pins can connect discrete sensors, switches, indicators, and actuators while the eight 12-bit ADC channels support analog transducers. The 32 MHz ARM Cortex-M3 core provides enough throughput for filtering, calibration, and communication handling, and the 1.85 V to 3.8 V operating range supports both 2.5 V and 3.3 V system rails. Firmware planning must reserve RAM for acquisition buffers and stack usage within the 4 kB memory limit.
अनुशंसित
Connected Measurement Device
The EFM32TG842F16-QFP64T is suitable for connected measurement equipment where a local MCU must acquire analog signals, process results, and communicate with a host. Its eight 12-bit ADC channels provide the sensing front end, while DMA and the 32 MHz Cortex-M3 core can move and process samples without excessive processor overhead. The 53 I/O pins support display control, buttons, status indicators, and serial interfaces. Designers should keep analog inputs away from switching-node traces and use the manufacturer pin table to assign I2S, LCD, UART, and other multiplexed functions without conflicts.
अनुशंसित
Building Control Module
The EFM32TG842F16-QFP64T can serve as the local controller in a building-control module that monitors environmental inputs and drives relays, indicators, or communication transceivers. Its 53 digital I/O pins reduce the need for multiple I/O expanders, while the 12-bit ADC can measure analog sensors and the DAC can support testing or control signals. Low-energy modes and fast wake-up behavior suit equipment that spends much of its time idle. Firmware must verify actuator shutdown states, watchdog operation, and brown-out response before the module controls connected loads.
अनुशंसित
Battery-Powered Handheld Instrument
The EFM32TG842F16-QFP64T suits battery-powered handheld instruments that combine local sensing, a small display, and low-power operation. The Cortex-M3 core handles control logic at up to 32 MHz, the LCD peripheral supports a compact display interface, and the ADC channels can acquire sensor data. Energy-saving modes and fast wake-up behavior can reduce activity during inactive periods, although final battery performance depends on the selected mode and measurement cadence. The 16 kB Flash and 4 kB RAM favor compact firmware, so diagnostic logs and update buffers should be sized before production.
अनुशंसित
Digital Audio Control Board
The EFM32TG842F16-QFP64T can handle digital audio control and configuration in a compact embedded system. Its I2S peripheral supports serial audio data transfer, while DMA reduces the processing burden of moving audio or control buffers. The 12-bit DAC provides a basic analog output for test tones or low-level audio functions, and the 32 MHz core can perform timing, decoding, and user-interface tasks. The design should maintain a short, controlled ground return for analog signals and validate I2S clocking, buffer depth, and peripheral pin multiplexing before production.
अनुशंसित
Motor and Actuator Control
The EFM32TG842F16-QFP64T is appropriate for small motor and actuator controllers that need deterministic timer resources, multiple I/O, and local analog monitoring. Its two 16-bit timers support periodic timing and PWM-related functions, while 53 digital I/O pins can accept limit switches, encoders, control signals, and fault inputs. The ADC channels can monitor current or position feedback when analog conditioning is present. Keep motor switching nodes and high-current return paths isolated from sensitive timing and measurement traces, and use the watchdog and brown-out reset features to establish a safe recovery path after electrical faults.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा EFM32TG842F16-QFP64T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | EFM32TG842F8-QFP64T | EFM32TG842F32-QFP64T | EFM32TG840F16-QFP64T | EFM32TG841F16-QFP64T | EFM32TG842F64-QFP64T |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 kB | 8 kB | 32 kB | 16 kB | 16 kB | 64 kB |
मुख्य विशेषताएँ
- Balanced memory configuration for compact embedded control (बनामEFM32TG842F8-QFP64T)
- Expansion path without a larger package (बनामEFM32TG842F32-QFP64T)
- Higher code capacity in the same footprint (बनामEFM32TG842F64-QFP64T)
डिज़ाइन नोट्स
Place the device on a continuous ground plane and route decoupling connections directly to the associated supply and ground pins. Keep the traces short, with the capacitor placed on the same PCB side as the controller whenever practical. The 64-TQFP footprint also requires adequate pin escape routing for 0.5 mm pitch connections; inspect the manufacturer land pattern rather than scaling a generic TQFP drawing.
Separate analog inputs from digital clocks, PWM outputs, and switching-regulator traces. The eight 12-bit ADC channels can be affected by coupling even though the controller operates from a regulated supply. Use a continuous ground reference, avoid routing sensitive inputs beneath high-current traces, and keep test points and debug signals away from the analog section. Validate the final layout with both idle and maximum switching activity in the assembled system.
Confirm that firmware fits the 16 kB Flash and 4 kB RAM limits before committing the PCB. Include the stack, interrupt handlers, DMA buffers, boot code, and update logic in the memory budget rather than measuring only application code. When changing to another EFM32 member, compare every used signal because a shared QFP64 footprint does not guarantee identical peripheral multiplexing, reset behavior, or debug assignments.
Design the supply for the complete 1.85 V to 3.8 V operating range and verify startup, brown-out reset, and behavior at the minimum rail. Decoupling requirements and peripheral current should be checked in the manufacturer electrical-characteristics table. Avoid placing analog measurement or actuator-control decisions near the point where supply noise or droop is most likely to affect system behavior.
अनुपालन जानकारी
The cited product and datasheet pages do not state complete compliance declarations for the exact EFM32TG842F16-QFP64T orderable MPN. Obtain current manufacturer declarations before production release. The stated -40°C to 85°C operating range does not by itself establish AEC-Q100 qualification.