EFM32TG842F16-QFP64T - 32MHz Cortex-M3 MCU | Silicon Labs
料号: EFM32TG842F16-QFP64T ✓ 量产中EFM32TG842F16-QFP64T 概述
An ARM Cortex-M3 microcontroller is a compact embedded processor used to control sensors, communications, display, and industrial equipment. The Cortex-M3 combines a 32-bit reduced-instruction-set computer core with interrupt handling, memory-protection features, and low-power operating states. Within the semiconductor hierarchy, the EFM32TG842 belongs to the EFM32 Tiny Gecko family of energy-sensitive 32-bit microcontrollers.
The device combines 16 kB Flash, 4 kB RAM, 53 digital I/O pins, and two 16-bit timers in a 10 mm by 10 mm TQFP package. Its integrated peripherals include DMA, I2S, LCD support, brown-out detection and reset, power-on reset, pulse-width modulation, and a watchdog timer. Conversion resources include eight 12-bit analog-to-digital converter channels and one 12-bit digital-to-analog converter channel.
The 32 MHz Cortex-M3 core provides sufficient processing throughput for protocol handling, control loops, data acquisition, and user-interface support while retaining multiple low-energy modes and fast wake-up behavior. Its 4 kB RAM limits the amount of simultaneous application data, but the integrated Flash and peripheral set support compact embedded designs that do not require external memory.
Typical uses include industrial sensor nodes, building-control equipment, battery-powered instruments, connected measurement devices, and compact human-machine interfaces. The combination of a 3.3 V-compatible supply range, 53 I/O pins, 12-bit ADC channels, and low-power architecture is particularly useful when one compact package must handle analog measurement and multiple digital interfaces.
PCB design should preserve a continuous ground reference beneath the TQFP and place decoupling capacitors close to the supply pins. Firmware must also account for the limited 16 kB Flash and 4 kB RAM budgets. Analog signal routing should be separated from high-current switching paths to reduce coupling into the ADC inputs.
This product record combines manufacturer specifications, package and sourcing details, practical design guidance, and a parameter-by-parameter comparison with compatible EFM32Tiny Gecko options. It is intended to help engineers confirm electrical limits, memory capacity, pin compatibility, and application suitability before starting an embedded design.
直接替换替代料: EFM32TG842F16-QFP64T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: EFM32TG842F16-QFP64T (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, Processor Core, RAM, Timers.
EFM32TG842F8-QFP64T
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →EFM32TG842F32-QFP64T
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
EFM32TG840F16-QFP64T
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
EFM32TG841F16-QFP64T
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
EFM32TG842F64-QFP64T
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
EFM32TG842F16-QFP64T 最大额定值与电气特性
| Processor Core | ARM Cortex-M3, 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 kB |
| RAM | 4 kB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit |
| 工作电源电压 | 1.85 V to 3.8 V |
| Nominal Supply Levels | 2.5 V and 3.3 V |
| 工作温度 | -40°C to 85°C |
| ADC | 8 channels x 12-bit |
| DAC | 1 channel x 12-bit |
| 封装 | 64-TQFP, 10 mm x 10 mm |
| 安装类型 | Surface mount |
| 引脚数量 | 64 pins |
| Integrated Peripherals | DMA, I2S, LCD, PWM, and watchdog timer |
| Protection Features | Brown-out detection and power-on reset |
| Low-Power Features | Energy-saving modes with fast wake-up |
EFM32TG842F16-QFP64T 64-tqfp, 10 mm x 10 mm 引脚配置指南
EFM32TG842F16-QFP64T(64-tqfp, 10 mm x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: EFM32TG842F16-QFP64T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EFM32TG842F16-QFP64T 适用于 6 应用s: Industrial Sensor Node, Connected Measurement Device, Building Control Module, Battery-Powered Handheld Instrument, Digital Audio Control Board, Motor and Actuator Control.
Industrial Sensor Node
The EFM32TG842F16-QFP64T fits compact industrial sensor nodes that require many digital inputs, local analog measurement, and low standby consumption. Its 53 digital I/O pins can connect discrete sensors, switches, indicators, and actuators while the eight 12-bit ADC channels support analog transducers. The 32 MHz ARM Cortex-M3 core provides enough throughput for filtering, calibration, and communication handling, and the 1.85 V to 3.8 V operating range supports both 2.5 V and 3.3 V system rails. Firmware planning must reserve RAM for acquisition buffers and stack usage within the 4 kB memory limit.
推荐
Connected Measurement Device
The EFM32TG842F16-QFP64T is suitable for connected measurement equipment where a local MCU must acquire analog signals, process results, and communicate with a host. Its eight 12-bit ADC channels provide the sensing front end, while DMA and the 32 MHz Cortex-M3 core can move and process samples without excessive processor overhead. The 53 I/O pins support display control, buttons, status indicators, and serial interfaces. Designers should keep analog inputs away from switching-node traces and use the manufacturer pin table to assign I2S, LCD, UART, and other multiplexed functions without conflicts.
推荐
Building Control Module
The EFM32TG842F16-QFP64T can serve as the local controller in a building-control module that monitors environmental inputs and drives relays, indicators, or communication transceivers. Its 53 digital I/O pins reduce the need for multiple I/O expanders, while the 12-bit ADC can measure analog sensors and the DAC can support testing or control signals. Low-energy modes and fast wake-up behavior suit equipment that spends much of its time idle. Firmware must verify actuator shutdown states, watchdog operation, and brown-out response before the module controls connected loads.
推荐
Battery-Powered Handheld Instrument
The EFM32TG842F16-QFP64T suits battery-powered handheld instruments that combine local sensing, a small display, and low-power operation. The Cortex-M3 core handles control logic at up to 32 MHz, the LCD peripheral supports a compact display interface, and the ADC channels can acquire sensor data. Energy-saving modes and fast wake-up behavior can reduce activity during inactive periods, although final battery performance depends on the selected mode and measurement cadence. The 16 kB Flash and 4 kB RAM favor compact firmware, so diagnostic logs and update buffers should be sized before production.
推荐
Digital Audio Control Board
The EFM32TG842F16-QFP64T can handle digital audio control and configuration in a compact embedded system. Its I2S peripheral supports serial audio data transfer, while DMA reduces the processing burden of moving audio or control buffers. The 12-bit DAC provides a basic analog output for test tones or low-level audio functions, and the 32 MHz core can perform timing, decoding, and user-interface tasks. The design should maintain a short, controlled ground return for analog signals and validate I2S clocking, buffer depth, and peripheral pin multiplexing before production.
推荐
Motor and Actuator Control
The EFM32TG842F16-QFP64T is appropriate for small motor and actuator controllers that need deterministic timer resources, multiple I/O, and local analog monitoring. Its two 16-bit timers support periodic timing and PWM-related functions, while 53 digital I/O pins can accept limit switches, encoders, control signals, and fault inputs. The ADC channels can monitor current or position feedback when analog conditioning is present. Keep motor switching nodes and high-current return paths isolated from sensitive timing and measurement traces, and use the watchdog and brown-out reset features to establish a safe recovery path after electrical faults.
推荐
推荐产品汇总
工程参考数据: EFM32TG842F16-QFP64T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EFM32TG842F8-QFP64T | EFM32TG842F32-QFP64T | EFM32TG840F16-QFP64T | EFM32TG841F16-QFP64T | EFM32TG842F64-QFP64T |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 kB | 8 kB | 32 kB | 16 kB | 16 kB | 64 kB |
关键差异点
- Balanced memory configuration for compact embedded control (对比 EFM32TG842F8-QFP64T)
- Expansion path without a larger package (对比 EFM32TG842F32-QFP64T)
- Higher code capacity in the same footprint (对比 EFM32TG842F64-QFP64T)
设计说明
Place the device on a continuous ground plane and route decoupling connections directly to the associated supply and ground pins. Keep the traces short, with the capacitor placed on the same PCB side as the controller whenever practical. The 64-TQFP footprint also requires adequate pin escape routing for 0.5 mm pitch connections; inspect the manufacturer land pattern rather than scaling a generic TQFP drawing.
Separate analog inputs from digital clocks, PWM outputs, and switching-regulator traces. The eight 12-bit ADC channels can be affected by coupling even though the controller operates from a regulated supply. Use a continuous ground reference, avoid routing sensitive inputs beneath high-current traces, and keep test points and debug signals away from the analog section. Validate the final layout with both idle and maximum switching activity in the assembled system.
Confirm that firmware fits the 16 kB Flash and 4 kB RAM limits before committing the PCB. Include the stack, interrupt handlers, DMA buffers, boot code, and update logic in the memory budget rather than measuring only application code. When changing to another EFM32 member, compare every used signal because a shared QFP64 footprint does not guarantee identical peripheral multiplexing, reset behavior, or debug assignments.
Design the supply for the complete 1.85 V to 3.8 V operating range and verify startup, brown-out reset, and behavior at the minimum rail. Decoupling requirements and peripheral current should be checked in the manufacturer electrical-characteristics table. Avoid placing analog measurement or actuator-control decisions near the point where supply noise or droop is most likely to affect system behavior.
合规信息
The cited product and datasheet pages do not state complete compliance declarations for the exact EFM32TG842F16-QFP64T orderable MPN. Obtain current manufacturer declarations before production release. The stated -40°C to 85°C operating range does not by itself establish AEC-Q100 qualification.