Silicon Labs

EFM32TG842F32-D-QFP64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

MPN: EFM32TG842F32-D-QFP64 ✓ सक्रिय
1.85 V to 3.8 V Vdss 150 uA/MHz Id 64-TQFP, 10 x 10 mm Package 32 MHz Speed 32 kB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

EFM32TG842F32-D-QFP64 अवलोकन

The Silicon Labs EFM32TG842F32-D-QFP64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB Flash memory, 4 kB RAM, and a 64-TQFP 10 x 10 mm package. It combines 53 digital I/O pins with two 16-bit timers for compact embedded control.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. Within the embedded-system hierarchy, the EFM32TG842 belongs to the ARM Cortex-M3 MCU class and the EFM32 Tiny Gecko family. The platform emphasizes energy-sensitive operation, rapid wake-up behavior, autonomous peripheral activity, and high analog integration.

Key features include a 32 MHz Cortex-M3 core, 32 kB Flash, 4 kB RAM, 53 digital I/O pins, and two 16-bit timers. The manufacturer datasheet reports current consumption as low as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. AES capability and LCD support expand its usefulness for secure controls and compact human-interface systems.

The EFM32 architecture places timers, GPIO, communications, and other peripherals close to the processor, reducing internal data movement and supporting responsive event-driven designs. Its Memory Protection Unit can protect up to eight memory segments, while the Cortex-M3 Wake-up Interrupt Controller allows events to trigger processor attention without continuous full-speed operation.

Typical uses include industrial sensor nodes, energy meters, battery-powered instruments, compact control panels, connected building equipment, and low-power data-acquisition systems. Its 53 GPIO pins provide substantial interface capacity for sensors, displays, communications transceivers, and discrete control signals in a single 10 x 10 mm package.

PCB design should preserve short, controlled return paths around supply and ground pins and follow the manufacturer's decoupling recommendations. When low standby energy is the priority, validate the complete peripheral configuration in Sleep and Stop modes because enabling clocks, communications, or analog blocks can change measured current.

This page combines manufacturer specifications, package details, engineering comparisons, drop-in alternatives, and practical design guidance to support faster component selection and PCB implementation.

के लिए ड्रॉप-इन विकल्प EFM32TG842F32-D-QFP64 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं EFM32TG842F32-D-QFP64 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Processor Core, Flash Memory, Product Type, Timers.

Silicon Labs
Package: 64-TQFP (10 x 10 mm)
Processor Core: ARM Cortex-M3 series
Product Type: 32-bit microcontroller
इसके साथ तुलना करें EFM32TG842F32-D-QFP64 →
Silicon Labs
Package: 64-TQFP, 10 mm × 10 mm
Flash Memory: 64 kB
Timers: 3 × 16-bit
इसके साथ तुलना करें EFM32TG842F32-D-QFP64 →
Silicon Labs
Package: 64-pin TQFP, 10 x 10 mm
Processor Core: ARM Cortex-M3
इसके साथ तुलना करें EFM32TG842F32-D-QFP64 →
Silicon Labs
Package: 64-TQFP (10 x 10 mm)
Processor Core: ARM Cortex-M3, 32-bit RISC
Flash Memory: 32 KB (32K x 8)
इसके साथ तुलना करें EFM32TG842F32-D-QFP64 →
Silicon Labs
Package: 64-TQFP
Processor Core: ARM Cortex-M4F
Flash Memory: 64 KB
इसके साथ तुलना करें EFM32TG842F32-D-QFP64 →

EFM32TG232F32-QFP64

✅ ड्रॉप-इन
Silicon Labs
📦 64-TQFP (10x10 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3 · 32 kB · 4 kB · 53 pins · 2 x 16-bit timers

कीमत के लिए संपर्क करें

डेटाशीट देखें →

EFM32G842F32-QFP64

✅ ड्रॉप-इन
Silicon Labs
📦 64-TQFP (10x10 mm)
ARM Cortex-M3 · 32 MHz · 32-bit · 32 kB · 8 kB · 53 · 3 x 16-bit · 2.5 V / 3.3 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

EFM32G842F64-QFP64

✅ ड्रॉप-इन
Silicon Labs
📦 64-TQFP (10x10 mm)
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 MHz · 64 kB · 16 kB · 53 · 3 × 16-bit · 1.98 V to 3.8 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

EFM32WG842F64-QFP64

✅ ड्रॉप-इन
Silicon Labs
📦 64-TQFP (10x10 mm)
32-bit ARM Cortex-M4F microcontroller · EFM32 Wonder Gecko · ARM Cortex-M4F · 48 MHz · 32-bit · 64 KB · 64K x 8 bits · 32K x 8 bits

कीमत के लिए संपर्क करें

डेटाशीट देखें →

EFM32TG842F32-D-QFP64 Maximum Ratings और Electrical Characteristics

Manufacturer Silicon Labs
Product Type 32-bit ARM Cortex-M3 microcontroller
CPU Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Flash Memory 32 kB
RAM 4 kB
Digital I/O Pins 53 pins
Timers 2 x 16-bit timers
Supply Voltage Range 1.85 V to 3.8 V
Run Mode Current 150 uA/MHz
Stop Mode Current 0.6 uA
Memory Protection Unit Capacity Up to 8 memory segments
Processor Performance Up to 1.25 Dhrystone MIPS/MHz
पैकेज 64-TQFP, 10 x 10 mm
माउंटिंग प्रकार Surface mount
Security Capability AES
Display Support LCD
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification unknown

EFM32TG842F32-D-QFP64 64-tqfp, 10 x 10 mm पिन कॉन्फ़िगरेशन गाइड

EFM32TG842F32-D-QFP64 (64-tqfp, 10 x 10 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

EFM32TG842F32-D-QFP64 के लिए 64-tqfp, 10 x 10 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: EFM32TG842F32-D-QFP64.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

EFM32TG842F32-D-QFP64 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor and Control Node, Battery-Powered Environmental Monitor, Compact LCD Control Panel, Energy Metering and Data Acquisition, Building Automation Controller, Secure Connected Embedded Device.

🏭

Industrial Sensor and Control Node

The EFM32TG842F32-D-QFP64 is well suited to industrial sensor and control nodes because its 32 MHz ARM Cortex-M3 core can execute acquisition, filtering, and local control logic while the 53 digital I/O pins reduce the need for external I/O expanders. The 1.85 V to 3.8 V operating range supports compact low-voltage designs. Its 150 uA/MHz Run-mode specification and 0.6 uA Stop-mode figure are valuable when the node spends most of its time waiting for sensor events. Firmware should disable unused peripherals and configure wake-up events to minimize system energy.

🧩

Battery-Powered Environmental Monitor

The EFM32TG842F32-D-QFP64 supports battery-powered environmental monitoring by combining low-power operation with sufficient processing capability for sampling and local filtering. The 0.6 uA Stop-mode specification is relevant during long inactive periods, while fast wake-up behavior enables the device to respond without remaining continuously active. Its 32 kB Flash can hold firmware and configuration data, and the 4 kB RAM supports short-term buffering. The 10 x 10 mm package also helps reduce enclosure size, although sensor standby currents can dominate the final system budget.

📺

Compact LCD Control Panel

The EFM32TG842F32-D-QFP64 fits compact LCD control panels because the MCU includes LCD support, 53 digital I/O pins, and two 16-bit timers for periodic display and input-handling tasks. Its 32 MHz Cortex-M3 core provides sufficient performance for menu logic, status updates, and communication handling while the 4 kB RAM accommodates display buffers. The 64-TQFP package offers more I/O than a minimal controller, allowing panel keys, indicators, and communications to share one device. Interface timing and segment mapping must be validated against the LCD controller and chosen panel.

⚡

Energy Metering and Data Acquisition

The EFM32TG842F32-D-QFP64 is applicable to energy-metering and data-acquisition equipment that needs real-time measurement control, event handling, and configurable communication interfaces. Its two 16-bit timers can support timing, pulse counting, and periodic sampling tasks, while the 53 GPIO pins allow multiple sensor and status signals to be connected. The Cortex-M3 Memory Protection Unit can isolate up to eight memory segments for code or data protection. Calibration data and event buffering must be sized against the available 4 kB RAM and 32 kB Flash.

🏠

Building Automation Controller

The EFM32TG842F32-D-QFP64 can serve as a building-automation controller for lighting, HVAC, access, or occupancy subsystems where many local signals must be managed economically. Its 53 GPIO pins can handle discrete inputs and outputs while the two timers support scheduled or repeating control functions. The low-power architecture is useful in permanently installed equipment that spends substantial time idle. A bus interface such as I2C, SPI, or RS-485 can be added as required, and the firmware should validate fail-safe states during resets, communication faults, and loss of power.

🌐

Secure Connected Embedded Device

The EFM32TG842F32-D-QFP64 fits secure connected embedded products that require hardware-assisted AES support and flexible serial communications. The Cortex-M3 platform can run network or fieldbus protocol stacks, and the EFM32 energy-management architecture can reduce consumption when the device waits for data or alarms. Its 32 kB Flash may require careful partition allocation for firmware, protocol code, keys, and configuration, while 4 kB RAM limits buffering depth. Secure boot, key storage, debug access, and update mechanisms should be addressed as part of the complete security design.

What are the key specifications of EFM32TG842F32-D-QFP64 that engineers should know?
The EFM32TG842F32-D-QFP64 combines a 32 MHz ARM Cortex-M3 core, 32 kB Flash, 4 kB RAM, 53 digital I/O pins, and two 16-bit timers in a 64-TQFP package. According to the Silicon Labs manufacturer datasheet, it consumes as little as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. Its 1.85 V to 3.8 V supply range, AES capability, and LCD support make it suitable for compact, low-power embedded-control systems requiring extensive GPIO and mixed analog or display interfaces.
What is the operating voltage of EFM32TG842F32-D-QFP64?
The EFM32TG842F32-D-QFP64 operates from 1.85 V to 3.8 V. According to the Silicon Labs manufacturer product documentation, this range supports the device's low-voltage ARM Cortex-M3 architecture and energy-saving operating modes. The power architecture must remain within this range during startup, active processing, Sleep, and Stop operation. Board-level designs should verify regulator tolerance, startup sequencing, and the voltage required by attached peripherals before applying the full operating range.
How much Flash and RAM does EFM32TG842F32-D-QFP64 have?
The EFM32TG842F32-D-QFP64 provides 32 kB of Flash memory and 4 kB of RAM. The Silicon Labs manufacturer product page identifies the device as a Tiny Gecko MCU with 32 kB Flash, while the manufacturer datasheet identifies the EFM32TG842 family as offering 32, 16, 8, or 4 kB Flash configurations. For the specified F32 device, the exact memory allocation is 32 kB Flash and 4 kB RAM, so firmware and working-buffer planning should use those fixed capacities.
Why is the EFM32TG842F32-D-QFP64 suitable for battery-powered equipment?
The EFM32TG842F32-D-QFP64 is suitable for battery-powered equipment because its energy-saving architecture reaches 0.6 uA in Stop mode, according to the Silicon Labs manufacturer datasheet. Run-mode consumption is specified at 150 uA/MHz, and fast wake-up behavior reduces the time the processor remains active between events. In an instrumented product, duty-cycle the processor and disable unused peripherals to achieve the lowest system current rather than relying on the Stop-mode figure alone.
Where can I download the EFM32TG842F32-D-QFP64 datasheet PDF?
The EFM32TG842F32-D-QFP64 datasheet PDF is available from the Silicon Labs manufacturer product page and the linked manufacturer-document mirror in this listing. Use the manufacturer datasheet to confirm the 64-pin assignments, electrical limits, clock requirements, memory map, and recommended application circuits. The product page is also the best starting point for current device documentation, software support, errata, and package information.
Where can I find the EFM32TG842F32-D-QFP64 pinout?
The EFM32TG842F32-D-QFP64 pinout is documented in the pin-description table and package drawing in the Silicon Labs manufacturer datasheet. The device uses a 64-TQFP 10 x 10 mm package with 53 digital I/O pins, so the remaining package positions include power, ground, reset, clock, programming, and other multifunction signals. Assign PCB tracks from the datasheet pin table and package drawing rather than inferring positions from a generic 64-pin symbol.
What can replace the EFM32TG842F32-D-QFP64 on an existing PCB?
The closest drop-in candidates identified for an existing EFM32TG842F32-D-QFP64 PCB are the EFM32TG232F32-QFP64, EFM32G842F32-QFP64, EFM32G842F64-QFP64, and EFM32WG842F64-QFP64. They use 64-pin QFP formats and retain a 32 MHz ARM Cortex-M3 foundation, but flash, RAM, timer count, and peripheral assignments differ. Verify the complete pin list, firmware support, memory requirements, and application behavior before replacing the original device.
Is EFM32TG842F32-D-QFP64 the same as EFM32TG232F32-QFP64?
No. The EFM32TG842F32-D-QFP64 and EFM32TG232F32-QFP64 are related 32 MHz, 32 kB-Flash, 64-QFP devices, but they belong to different EFM32 performance families and can differ in RAM, peripherals, timers, and low-power behavior. Their common package format makes them candidates for a board review, not automatically interchangeable. Compare the manufacturer pin tables and device headers, then confirm that the original firmware and peripheral assignments remain valid.
EFM32TG842F32-D-QFP64 vs EFM32G842F32-QFP64: which is better for a low-power design?
The EFM32TG842F32-D-QFP64 is generally the stronger choice when the design specifically needs the Tiny Gecko low-power feature set and its two 16-bit timers. The EFM32G842F32-QFP64 provides 32 kB Flash and 8 kB RAM with three 16-bit timers, while the Tiny Gecko device provides 32 kB Flash and 4 kB RAM with two 16-bit timers. Choose based on the required peripheral mix and validated low-power behavior rather than treating the common 64-pin package as sufficient by itself.
When should I choose EFM32TG842F32-D-QFP64 over EFM32G842F64-QFP64?
Choose the EFM32TG842F32-D-QFP64 when its Tiny Gecko low-power characteristics, 4 kB RAM, two timers, and documented peripheral configuration satisfy the design. Choose the EFM32G842F64-QFP64 when the design benefits from 64 kB Flash, 16 kB RAM, and three timers. Both operate up to 32 MHz and use 64-pin QFP packages, but memory capacity and peripheral differences can determine whether existing software and board functions can be transferred without redesign.
Is EFM32TG842F32-D-QFP64 suitable for industrial sensor and control nodes?
Yes. The EFM32TG842F32-D-QFP64 fits industrial sensor and control nodes requiring low standby power, many I/O connections, and deterministic embedded processing. Its 53 digital I/O pins can connect sensors, discrete controls, and communications hardware, while the 32 MHz Cortex-M3 core handles control logic. The 1.85 V to 3.8 V supply range and 10 x 10 mm package also help reduce board size, although EMC, environmental qualification, and isolated-interface requirements must be assessed separately.
How should EFM32TG842F32-D-QFP64 power and decoupling be designed?
Design the EFM32TG842F32-D-QFP64 power rail within its 1.85 V to 3.8 V operating range and place the required bypass capacitors close to the package supply and ground connections. Follow the manufacturer datasheet's decoupling and layout guidance rather than adding arbitrary capacitance that could increase inrush or complicate power sequencing. Verify startup current, regulator stability, ground return paths, and voltage tolerance across temperature and load conditions.
What programming tools are compatible with EFM32TG842F32-D-QFP64?
The EFM32TG842F32-D-QFP64 uses the Silicon Labs EFM32 programming and debug environment, and the QFP64 variant is also identified in the programming-device directory cited for this part. The device uses an ARM Cortex-M3 core, supporting standard Cortex-M debugging and programming methods. Confirm the selected adapter's package coverage, cable orientation, target voltage, and Silicon Labs device support before using a programmer on production hardware.
Where can I buy EFM32TG842F32-D-QFP64 and check its lead time?
Use the Request a Quote form on this page to request the EFM32TG842F32-D-QFP64, its current availability, quantity breaks, and manufacturing lead time. The part is an ARM Cortex-M3 microcontroller in a 64-TQFP 10 x 10 mm package, so attach the required date code, packaging code, and quantity details to the request. Current commercial terms should be confirmed directly because lead time and inventory can change.
Is EFM32TG842F32-D-QFP64 compliant with RoHS and REACH?
The RoHS and REACH status of EFM32TG842F32-D-QFP64 must be confirmed from the current Silicon Labs material-declaration or product-compliance documentation. The manufacturer product page and datasheet establish the device identity, electrical architecture, and package, while formal substance declarations are maintained separately for regulatory use. For a released production design, request the declaration covering the exact ordering code and package suffix rather than relying on a generic family statement.

के लिए इंजीनियरिंग संदर्भ डेटा EFM32TG842F32-D-QFP64 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the EFM32TG842F32-D-QFP64 for compact, low-power embedded systems that need a 32 MHz Cortex-M3 core, 32 kB Flash, 4 kB RAM, LCD support, AES capability, 53 GPIO pins, and two 16-bit timers. Choose the EFM32G842F32-QFP64 when the same Flash capacity and GPIO count are needed but 8 kB RAM and a third timer add value. Choose the EFM32G842F64-QFP64 or EFM32WG842F64-QFP64 when 64 kB Flash and 16 kB RAM simplify firmware partitioning, although their family-specific peripherals require validation. The EFM32TG232F32-QFP64 is a 32 MHz, 32 kB-Flash candidate in the same 64-QFP format, but its RAM and peripheral configuration must be confirmed. For every candidate, verify the complete pin table, clock requirements, peripheral multiplexing, firmware support, and low-power behavior before approving a drop-in replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद EFM32TG232F32-QFP64 EFM32G842F32-QFP64 EFM32G842F64-QFP64 EFM32WG842F64-QFP64
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-TQFP (10x10 mm) 64-TQFP (10x10 mm) 64-TQFP (10x10 mm) 64-TQFP (10x10 mm) 64-TQFP (10x10 mm)
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 kB 32 kB 32 kB 64 kB 64 kB

मुख्य विशेषताएँ

  • Lower RAM demand in the Tiny Gecko configuration (बनामEFM32G842F32-QFP64)
  • Lower flash capacity can simplify fixed-function firmware (बनामEFM32G842F64-QFP64)
  • Two 16-bit timers reduce duplicated timing resources (बनामEFM32G842F32-QFP64)
  • Tiny Gecko low-power architecture targets energy-sensitive systems (बनामEFM32WG842F64-QFP64)

डिज़ाइन नोट्स

Keep the EFM32TG842F32-D-QFP64 supply within 1.85 V to 3.8 V and follow the manufacturer datasheet's recommended bypass network. Place the principal input and output capacitors close to their package pins with short ground returns. Validate regulator startup, load transient response, and inrush behavior because the MCU's Run-mode demand of 150 uA/MHz can rise rapidly as clock speed and active peripherals increase.

Use a continuous ground plane beneath the QFP device and route high-speed clock signals over uninterrupted reference planes. Separate sensitive analog inputs from switching and digital return currents, especially when the MCU is used for acquisition or metering. Keep programming and debug access clear of assembly fixtures, and verify every alternate 64-QFP candidate against the complete datasheet pin table because package size alone does not establish electrical equivalence.

Do not treat EFM32TG232F32-QFP64, EFM32G842F32-QFP64, EFM32G842F64-QFP64, or EFM32WG842F64-QFP64 as automatic software-compatible substitutes. Differences in RAM, timers, peripheral multiplexing, interrupt assignments, and low-power behavior can require firmware and board validation. In a battery design, measure current across Sleep and Stop states with all external devices disabled; the 0.6 uA Stop-mode specification applies to the MCU rather than the complete product.

Route the main clock according to the manufacturer's reference layout and keep its return path continuous through the ground plane. Decouple each active supply domain locally and avoid sharing narrow return paths between the MCU, communications interface, and display circuitry. When using the LCD function, validate timing, bias voltage, and pin multiplexing in the device configuration because alternate peripheral assignments can affect board-level signal routing.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Formal RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the technical product documentation reviewed. Obtain the current material declaration for the exact ordering code from Silicon Labs before regulatory qualification.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

EFM32TG842F32-D-QFP64 datasheet EFM32TG842F32-D-QFP64 pinout EFM32TG842F32-D-QFP64 datasheet pdf EFM32TG842F32-D-QFP64 equivalent EFM32TG842F32-D-QFP64 replacement EFM32TG842F32-D-QFP64 cross reference EFM32TG842F32-D-QFP64 vs EFM32G842F32-QFP64 EFM32TG842F32-D-QFP64 footprint EFM32TG842F32-D-QFP64 application circuit Silicon Labs EFM32TG842F32-D-QFP64 EFM32TG842F32-D-QFP64 price EFM32TG842F32-D-QFP64 stock

संबंधित कंपोनेंट्स और शब्द

Silicon Labs EFM32TG842F32-D-QFP64 EFM32TG232F32-QFP64 EFM32G842F32-QFP64 EFM32G842F64-QFP64 EFM32WG842F64-QFP64 EFM32 Tiny Gecko ARM Cortex-M3 microcontroller MCU embedded microcontroller 32-bit processor low-power platform autonomous peripherals Memory Protection Unit Wake-up Interrupt Controller AES LCD TQFP-64 QFN family surface mount SMD GPIO battery-powered embedded system industrial sensor node
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें