EFM32TG842F32-D-QFP64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG842F32-D-QFP64 ✓ فعالEFM32TG842F32-D-QFP64 جائزہ
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. Within the embedded-system hierarchy, the EFM32TG842 belongs to the ARM Cortex-M3 MCU class and the EFM32 Tiny Gecko family. The platform emphasizes energy-sensitive operation, rapid wake-up behavior, autonomous peripheral activity, and high analog integration.
Key features include a 32 MHz Cortex-M3 core, 32 kB Flash, 4 kB RAM, 53 digital I/O pins, and two 16-bit timers. The manufacturer datasheet reports current consumption as low as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. AES capability and LCD support expand its usefulness for secure controls and compact human-interface systems.
The EFM32 architecture places timers, GPIO, communications, and other peripherals close to the processor, reducing internal data movement and supporting responsive event-driven designs. Its Memory Protection Unit can protect up to eight memory segments, while the Cortex-M3 Wake-up Interrupt Controller allows events to trigger processor attention without continuous full-speed operation.
Typical uses include industrial sensor nodes, energy meters, battery-powered instruments, compact control panels, connected building equipment, and low-power data-acquisition systems. Its 53 GPIO pins provide substantial interface capacity for sensors, displays, communications transceivers, and discrete control signals in a single 10 x 10 mm package.
PCB design should preserve short, controlled return paths around supply and ground pins and follow the manufacturer's decoupling recommendations. When low standby energy is the priority, validate the complete peripheral configuration in Sleep and Stop modes because enabling clocks, communications, or analog blocks can change measured current.
This page combines manufacturer specifications, package details, engineering comparisons, drop-in alternatives, and practical design guidance to support faster component selection and PCB implementation.
کے لیے ڈراپ اِن متبادل EFM32TG842F32-D-QFP64 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EFM32TG842F32-D-QFP64 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Processor Core, Flash Memory, Product Type, Timers.
EFM32TG232F32-QFP64
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32G842F32-QFP64
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32G842F64-QFP64
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32WG842F64-QFP64
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32TG842F32-D-QFP64 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Manufacturer | Silicon Labs |
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| CPU Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 4 kB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Run Mode Current | 150 uA/MHz |
| Stop Mode Current | 0.6 uA |
| Memory Protection Unit Capacity | Up to 8 memory segments |
| Processor Performance | Up to 1.25 Dhrystone MIPS/MHz |
| پیکیج | 64-TQFP, 10 x 10 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Security Capability | AES |
| Display Support | LCD |
| RoHS اسٹیٹس | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
EFM32TG842F32-D-QFP64 64-tqfp, 10 x 10 mm پن کنفیگریشن گائیڈ
EFM32TG842F32-D-QFP64 (64-tqfp, 10 x 10 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EFM32TG842F32-D-QFP64.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EFM32TG842F32-D-QFP64 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor and Control Node, Battery-Powered Environmental Monitor, Compact LCD Control Panel, Energy Metering and Data Acquisition, Building Automation Controller, Secure Connected Embedded Device.
Industrial Sensor and Control Node
The EFM32TG842F32-D-QFP64 is well suited to industrial sensor and control nodes because its 32 MHz ARM Cortex-M3 core can execute acquisition, filtering, and local control logic while the 53 digital I/O pins reduce the need for external I/O expanders. The 1.85 V to 3.8 V operating range supports compact low-voltage designs. Its 150 uA/MHz Run-mode specification and 0.6 uA Stop-mode figure are valuable when the node spends most of its time waiting for sensor events. Firmware should disable unused peripherals and configure wake-up events to minimize system energy.
تجویز کردہ
Battery-Powered Environmental Monitor
The EFM32TG842F32-D-QFP64 supports battery-powered environmental monitoring by combining low-power operation with sufficient processing capability for sampling and local filtering. The 0.6 uA Stop-mode specification is relevant during long inactive periods, while fast wake-up behavior enables the device to respond without remaining continuously active. Its 32 kB Flash can hold firmware and configuration data, and the 4 kB RAM supports short-term buffering. The 10 x 10 mm package also helps reduce enclosure size, although sensor standby currents can dominate the final system budget.
تجویز کردہ
Compact LCD Control Panel
The EFM32TG842F32-D-QFP64 fits compact LCD control panels because the MCU includes LCD support, 53 digital I/O pins, and two 16-bit timers for periodic display and input-handling tasks. Its 32 MHz Cortex-M3 core provides sufficient performance for menu logic, status updates, and communication handling while the 4 kB RAM accommodates display buffers. The 64-TQFP package offers more I/O than a minimal controller, allowing panel keys, indicators, and communications to share one device. Interface timing and segment mapping must be validated against the LCD controller and chosen panel.
تجویز کردہ
Energy Metering and Data Acquisition
The EFM32TG842F32-D-QFP64 is applicable to energy-metering and data-acquisition equipment that needs real-time measurement control, event handling, and configurable communication interfaces. Its two 16-bit timers can support timing, pulse counting, and periodic sampling tasks, while the 53 GPIO pins allow multiple sensor and status signals to be connected. The Cortex-M3 Memory Protection Unit can isolate up to eight memory segments for code or data protection. Calibration data and event buffering must be sized against the available 4 kB RAM and 32 kB Flash.
تجویز کردہ
Building Automation Controller
The EFM32TG842F32-D-QFP64 can serve as a building-automation controller for lighting, HVAC, access, or occupancy subsystems where many local signals must be managed economically. Its 53 GPIO pins can handle discrete inputs and outputs while the two timers support scheduled or repeating control functions. The low-power architecture is useful in permanently installed equipment that spends substantial time idle. A bus interface such as I2C, SPI, or RS-485 can be added as required, and the firmware should validate fail-safe states during resets, communication faults, and loss of power.
تجویز کردہ
Secure Connected Embedded Device
The EFM32TG842F32-D-QFP64 fits secure connected embedded products that require hardware-assisted AES support and flexible serial communications. The Cortex-M3 platform can run network or fieldbus protocol stacks, and the EFM32 energy-management architecture can reduce consumption when the device waits for data or alarms. Its 32 kB Flash may require careful partition allocation for firmware, protocol code, keys, and configuration, while 4 kB RAM limits buffering depth. Secure boot, key storage, debug access, and update mechanisms should be addressed as part of the complete security design.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EFM32TG842F32-D-QFP64 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EFM32TG232F32-QFP64 | EFM32G842F32-QFP64 | EFM32G842F64-QFP64 | EFM32WG842F64-QFP64 |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 kB | 32 kB | 32 kB | 64 kB | 64 kB |
اہم امتیازی خصوصیات
- Lower RAM demand in the Tiny Gecko configuration (بمقابلہEFM32G842F32-QFP64)
- Lower flash capacity can simplify fixed-function firmware (بمقابلہEFM32G842F64-QFP64)
- Two 16-bit timers reduce duplicated timing resources (بمقابلہEFM32G842F32-QFP64)
- Tiny Gecko low-power architecture targets energy-sensitive systems (بمقابلہEFM32WG842F64-QFP64)
ڈیزائن نوٹس
Keep the EFM32TG842F32-D-QFP64 supply within 1.85 V to 3.8 V and follow the manufacturer datasheet's recommended bypass network. Place the principal input and output capacitors close to their package pins with short ground returns. Validate regulator startup, load transient response, and inrush behavior because the MCU's Run-mode demand of 150 uA/MHz can rise rapidly as clock speed and active peripherals increase.
Use a continuous ground plane beneath the QFP device and route high-speed clock signals over uninterrupted reference planes. Separate sensitive analog inputs from switching and digital return currents, especially when the MCU is used for acquisition or metering. Keep programming and debug access clear of assembly fixtures, and verify every alternate 64-QFP candidate against the complete datasheet pin table because package size alone does not establish electrical equivalence.
Do not treat EFM32TG232F32-QFP64, EFM32G842F32-QFP64, EFM32G842F64-QFP64, or EFM32WG842F64-QFP64 as automatic software-compatible substitutes. Differences in RAM, timers, peripheral multiplexing, interrupt assignments, and low-power behavior can require firmware and board validation. In a battery design, measure current across Sleep and Stop states with all external devices disabled; the 0.6 uA Stop-mode specification applies to the MCU rather than the complete product.
Route the main clock according to the manufacturer's reference layout and keep its return path continuous through the ground plane. Decouple each active supply domain locally and avoid sharing narrow return paths between the MCU, communications interface, and display circuitry. When using the LCD function, validate timing, bias voltage, and pin multiplexing in the device configuration because alternate peripheral assignments can affect board-level signal routing.
تعمیل کی معلومات
Formal RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the technical product documentation reviewed. Obtain the current material declaration for the exact ordering code from Silicon Labs before regulatory qualification.