EFM32WG332F64-QFP64 - 48MHz Cortex-M4F 64KB MCU | Silicon Labs
MPN: EFM32WG332F64-QFP64 ✓ सक्रियEFM32WG332F64-QFP64 अवलोकन
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The EFM32WG332 belongs to the Wonder Gecko family of 32-bit embedded microcontrollers, combining an ARM Cortex-M4F processor with energy-conscious peripherals for connected, low-power products. Its floating-point and DSP instruction support makes it suitable for control logic that must process mixed integer, signal, and floating-point workloads.
The headline configuration combines a 48 MHz Cortex-M4F core, 64 KB flash, USB connectivity, and AES security in a 64-QFN package. The compact 9 x 9 mm package supports space-constrained circuit boards while providing 64 electrical contacts. Its 1.98 V to 3.8 V operating range is appropriate for systems using a regulated 3.3 V rail or compatible lower-voltage supply architectures.
The Cortex-M4F architecture provides a 32-bit processing path with single-precision floating-point and DSP instructions. This allows efficient implementation of digital control, sensor processing, communications, and protocol handling without requiring a separate digital signal processor. Hardware AES and USB support further reduce the processing burden associated with secure data transfer and USB-connected equipment.
Typical applications include energy-metering and utility equipment, building-automation controllers, industrial sensor nodes, portable medical accessories, connected security products, and compact USB peripherals. The Wonder Gecko platform is particularly relevant when a design needs strong processing performance, low-power operation, and integrated connectivity in a small package.
Designers should assign all 64 package pins from the manufacturer pin-description table and preserve the exposed thermal-pad connection recommended for the selected PCB land pattern. Decoupling, clock stability, USB routing, and supply sequencing should follow the device reference circuitry. Firmware development should use the supported Silicon Labs toolchain and verify peripheral assignments against the exact package variant.
This page consolidates the confirmed electrical identity, package information, connectivity features, replacement analysis, comparison parameters, and practical integration guidance for engineers evaluating the EFM32WG332F64-QFP64.
के लिए ड्रॉप-इन विकल्प EFM32WG332F64-QFP64 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं EFM32WG332F64-QFP64 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Series.
EFM32WG332F256-QFP64
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
EFM32G232F128G-E-QFP64R
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EFM32WG332F64-QFP64 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Series | Wonder Gecko |
| CPU Core | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz |
| Architecture | 32-bit |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Supply Voltage Range | 1.98 V to 3.8 V |
| पैकेज | 64-QFN, 9 x 9 mm |
| पिन काउंट | 64 pins |
| माउंटिंग प्रकार | Surface mount |
| USB Interface | Yes |
| Hardware AES | Yes |
| DSP Instructions | Yes |
| Floating-Point Unit | Yes, single precision |
| Manufacturer | Silicon Labs |
EFM32WG332F64-QFP64 64-qfn, 9 x 9 mm पिन कॉन्फ़िगरेशन गाइड
EFM32WG332F64-QFP64 (64-qfn, 9 x 9 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: EFM32WG332F64-QFP64.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
EFM32WG332F64-QFP64 के लिए उपयुक्त है 6 अनुप्रयोगs: USB-Connected Sensor Equipment, Industrial Sensor Node, Building Automation Controller, Portable Medical Accessory, Energy Measurement Module, Connected Security Device.
USB-Connected Sensor Equipment
The EFM32WG332F64-QFP64 fits USB-connected sensor equipment because it combines a 48 MHz ARM Cortex-M4F processor with integrated USB and 64 KB of flash. The controller can acquire sensor data, perform filtering, and present results over USB without requiring a separate interface IC. Its 1.98 V to 3.8 V supply range supports compact regulated power systems. Designers should reserve differential USB routing space, provide compliant bus protection, and validate enumeration behavior across the intended host and cable configuration.
अनुशंसित
Industrial Sensor Node
The EFM32WG332F64-QFP64 is suitable for industrial sensor nodes that combine local signal processing with low-power operation. Its Cortex-M4F core executes control logic and DSP or floating-point calculations at up to 48 MHz, while 64 KB of flash stores application firmware and parameter tables. The 64-QFN 9 x 9 mm package limits board area in distributed monitoring systems. Confirm peripheral assignments, clock configuration, and environmental operating limits against the manufacturer documentation for each deployed condition.
अनुशंसित
Building Automation Controller
The EFM32WG332F64-QFP64 can serve as the central controller in a compact building-automation module. The 48 MHz Cortex-M4F processor provides sufficient performance for sensor management, actuator decisions, communication protocols, and local control logic, while the DSP and floating-point instructions support filtered measurements. Its 64-QFN package supports space-conscious control boards. Firmware should include watchdog and fault-handling strategies, and PCB design should isolate sensitive analog or communications paths from switching and high-current circuitry.
अनुशंसित
Portable Medical Accessory
The EFM32WG332F64-QFP64 supports portable medical accessories that need local processing, a compact footprint, and hardware-assisted security. Its 48 MHz Cortex-M4F core can handle control tasks and numeric processing, while hardware AES supports efficient implementation of cryptographic operations. The 64-QFN 9 x 9 mm package is useful in wearable or handheld products. Medical designs must still address applicable product-specific validation, isolation, safety, and environmental requirements beyond the component-level electrical specifications.
अनुशंसित
Energy Measurement Module
The EFM32WG332F64-QFP64 is appropriate for compact energy-measurement modules requiring deterministic processing in a space-constrained enclosure. The Cortex-M4F core can execute sampling control, calibration routines, and floating-point calculations at up to 48 MHz, while 64 KB of flash holds firmware and configuration data. The package supports dense board layouts, but precision analog and current-sensing layouts should remain separate from digital and USB-return paths. Validate clock accuracy, scaling behavior, and temperature compensation in the final system.
अनुशंसित
Connected Security Device
The EFM32WG332F64-QFP64 fits compact connected security devices because it combines a 48 MHz Cortex-M4F core, hardware AES, and USB in one 64-QFN package. Security-aware firmware can use the AES hardware to reduce software overhead, while the processor handles device management, communication, and access-control logic. Designers should establish a secure boot and update strategy, protect debug access, and validate the USB implementation for the intended threat model. The 64 KB flash limit requires careful budgeting when multiple protocol stacks and cryptographic libraries are included.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा EFM32WG332F64-QFP64 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | EFM32WG332F256-QFP64 | EFM32G232F128G-E-QFP64R |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9x9) | 64-QFP | 64-QFP |
| CPU Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4 class |
| Flash Memory | 64 KB | 256 KB | 128 KB |
मुख्य विशेषताएँ
- Lower flash capacity within the same Wonder Gecko family (बनामEFM32WG332F256-QFP64)
- Integrated connectivity and security for compact USB products (बनामEFM32G232F128G-E-QFP64R)
- Documented Cortex-M4F processing configuration (बनामEFM32WG332F256-QFP64)
डिज़ाइन नोट्स
Use the manufacturer drawing for the 64-QFN 9 x 9 mm land pattern rather than a generic QFN footprint. Confirm pad and mask dimensions, thermal-via configuration, and the exposed-pad connection to ground. The pinout is not reproduced here because the complete manufacturer pin-description table was not part of the verified product record; assign every connection directly from that table before releasing PCB artwork.
Design the supply network for the confirmed 1.98 V to 3.8 V operating range and place local decoupling close to the device's supply and ground pins. Keep analog, digital, and clock-supply routing consistent with the manufacturer reference circuit. Verify startup, brownout behavior, and external load currents at the system level because the component specification alone does not establish the performance of the complete power tree.
For USB implementations, route the differential pair as a controlled-impedance pair with a continuous reference plane and minimize stubs and unnecessary layer transitions. Keep the USB connector, protection components, and transceiver path away from noisy switching nodes. The 48 MHz CPU clock also requires deliberate layout and power-distribution planning, including short return paths and avoidance of coupling into sensitive input channels.
Do not treat a same-package candidate as an unconditional drop-in replacement. The 256 KB flash alternative changes the available memory map and may affect linker placement, boot configuration, and firmware sizing, while a different Gecko family can differ in peripheral population or behavior. Review the manufacturer pin table, errata, device initialization, and application-specific peripheral requirements before substituting any candidate.
अनुपालन जानकारी
The verified product record does not provide definitive component-level compliance statements. The required compliance status should be confirmed with Silicon Labs before qualification.