EFM32WG332F64-QFP64 - 48MHz Cortex-M4F 64KB MCU | Silicon Labs
料号: EFM32WG332F64-QFP64 ✓ 量产中EFM32WG332F64-QFP64 概述
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The EFM32WG332 belongs to the Wonder Gecko family of 32-bit embedded microcontrollers, combining an ARM Cortex-M4F processor with energy-conscious peripherals for connected, low-power products. Its floating-point and DSP instruction support makes it suitable for control logic that must process mixed integer, signal, and floating-point workloads.
The headline configuration combines a 48 MHz Cortex-M4F core, 64 KB flash, USB connectivity, and AES security in a 64-QFN package. The compact 9 x 9 mm package supports space-constrained circuit boards while providing 64 electrical contacts. Its 1.98 V to 3.8 V operating range is appropriate for systems using a regulated 3.3 V rail or compatible lower-voltage supply architectures.
The Cortex-M4F architecture provides a 32-bit processing path with single-precision floating-point and DSP instructions. This allows efficient implementation of digital control, sensor processing, communications, and protocol handling without requiring a separate digital signal processor. Hardware AES and USB support further reduce the processing burden associated with secure data transfer and USB-connected equipment.
Typical applications include energy-metering and utility equipment, building-automation controllers, industrial sensor nodes, portable medical accessories, connected security products, and compact USB peripherals. The Wonder Gecko platform is particularly relevant when a design needs strong processing performance, low-power operation, and integrated connectivity in a small package.
Designers should assign all 64 package pins from the manufacturer pin-description table and preserve the exposed thermal-pad connection recommended for the selected PCB land pattern. Decoupling, clock stability, USB routing, and supply sequencing should follow the device reference circuitry. Firmware development should use the supported Silicon Labs toolchain and verify peripheral assignments against the exact package variant.
This page consolidates the confirmed electrical identity, package information, connectivity features, replacement analysis, comparison parameters, and practical integration guidance for engineers evaluating the EFM32WG332F64-QFP64.
直接替换替代料: EFM32WG332F64-QFP64 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: EFM32WG332F64-QFP64 (相同外形与封装尺寸) ——差异在于 Package, Series.
EFM32WG332F256-QFP64
✅ 直接替换📋 参考替代料(不在目录中)
EFM32G232F128G-E-QFP64R
✅ 直接替换联系询价
查看数据手册 →EFM32WG332F64-QFP64 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Series | Wonder Gecko |
| CPU Core | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz |
| Architecture | 32-bit |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Supply Voltage Range | 1.98 V to 3.8 V |
| 封装 | 64-QFN, 9 x 9 mm |
| 引脚数量 | 64 pins |
| 安装类型 | Surface mount |
| USB Interface | Yes |
| Hardware AES | Yes |
| DSP Instructions | Yes |
| Floating-Point Unit | Yes, single precision |
| Manufacturer | Silicon Labs |
EFM32WG332F64-QFP64 64-qfn, 9 x 9 mm 引脚配置指南
EFM32WG332F64-QFP64(64-qfn, 9 x 9 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: EFM32WG332F64-QFP64.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EFM32WG332F64-QFP64 适用于 6 应用s: USB-Connected Sensor Equipment, Industrial Sensor Node, Building Automation Controller, Portable Medical Accessory, Energy Measurement Module, Connected Security Device.
USB-Connected Sensor Equipment
The EFM32WG332F64-QFP64 fits USB-connected sensor equipment because it combines a 48 MHz ARM Cortex-M4F processor with integrated USB and 64 KB of flash. The controller can acquire sensor data, perform filtering, and present results over USB without requiring a separate interface IC. Its 1.98 V to 3.8 V supply range supports compact regulated power systems. Designers should reserve differential USB routing space, provide compliant bus protection, and validate enumeration behavior across the intended host and cable configuration.
推荐
Industrial Sensor Node
The EFM32WG332F64-QFP64 is suitable for industrial sensor nodes that combine local signal processing with low-power operation. Its Cortex-M4F core executes control logic and DSP or floating-point calculations at up to 48 MHz, while 64 KB of flash stores application firmware and parameter tables. The 64-QFN 9 x 9 mm package limits board area in distributed monitoring systems. Confirm peripheral assignments, clock configuration, and environmental operating limits against the manufacturer documentation for each deployed condition.
推荐
Building Automation Controller
The EFM32WG332F64-QFP64 can serve as the central controller in a compact building-automation module. The 48 MHz Cortex-M4F processor provides sufficient performance for sensor management, actuator decisions, communication protocols, and local control logic, while the DSP and floating-point instructions support filtered measurements. Its 64-QFN package supports space-conscious control boards. Firmware should include watchdog and fault-handling strategies, and PCB design should isolate sensitive analog or communications paths from switching and high-current circuitry.
推荐
Portable Medical Accessory
The EFM32WG332F64-QFP64 supports portable medical accessories that need local processing, a compact footprint, and hardware-assisted security. Its 48 MHz Cortex-M4F core can handle control tasks and numeric processing, while hardware AES supports efficient implementation of cryptographic operations. The 64-QFN 9 x 9 mm package is useful in wearable or handheld products. Medical designs must still address applicable product-specific validation, isolation, safety, and environmental requirements beyond the component-level electrical specifications.
推荐
Energy Measurement Module
The EFM32WG332F64-QFP64 is appropriate for compact energy-measurement modules requiring deterministic processing in a space-constrained enclosure. The Cortex-M4F core can execute sampling control, calibration routines, and floating-point calculations at up to 48 MHz, while 64 KB of flash holds firmware and configuration data. The package supports dense board layouts, but precision analog and current-sensing layouts should remain separate from digital and USB-return paths. Validate clock accuracy, scaling behavior, and temperature compensation in the final system.
推荐
Connected Security Device
The EFM32WG332F64-QFP64 fits compact connected security devices because it combines a 48 MHz Cortex-M4F core, hardware AES, and USB in one 64-QFN package. Security-aware firmware can use the AES hardware to reduce software overhead, while the processor handles device management, communication, and access-control logic. Designers should establish a secure boot and update strategy, protect debug access, and validate the USB implementation for the intended threat model. The 64 KB flash limit requires careful budgeting when multiple protocol stacks and cryptographic libraries are included.
推荐
推荐产品汇总
工程参考数据: EFM32WG332F64-QFP64 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EFM32WG332F256-QFP64 | EFM32G232F128G-E-QFP64R |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9x9) | 64-QFP | 64-QFP |
| CPU Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4 class |
| Flash Memory | 64 KB | 256 KB | 128 KB |
关键差异点
- Lower flash capacity within the same Wonder Gecko family (对比 EFM32WG332F256-QFP64)
- Integrated connectivity and security for compact USB products (对比 EFM32G232F128G-E-QFP64R)
- Documented Cortex-M4F processing configuration (对比 EFM32WG332F256-QFP64)
设计说明
Use the manufacturer drawing for the 64-QFN 9 x 9 mm land pattern rather than a generic QFN footprint. Confirm pad and mask dimensions, thermal-via configuration, and the exposed-pad connection to ground. The pinout is not reproduced here because the complete manufacturer pin-description table was not part of the verified product record; assign every connection directly from that table before releasing PCB artwork.
Design the supply network for the confirmed 1.98 V to 3.8 V operating range and place local decoupling close to the device's supply and ground pins. Keep analog, digital, and clock-supply routing consistent with the manufacturer reference circuit. Verify startup, brownout behavior, and external load currents at the system level because the component specification alone does not establish the performance of the complete power tree.
For USB implementations, route the differential pair as a controlled-impedance pair with a continuous reference plane and minimize stubs and unnecessary layer transitions. Keep the USB connector, protection components, and transceiver path away from noisy switching nodes. The 48 MHz CPU clock also requires deliberate layout and power-distribution planning, including short return paths and avoidance of coupling into sensitive input channels.
Do not treat a same-package candidate as an unconditional drop-in replacement. The 256 KB flash alternative changes the available memory map and may affect linker placement, boot configuration, and firmware sizing, while a different Gecko family can differ in peripheral population or behavior. Review the manufacturer pin table, errata, device initialization, and application-specific peripheral requirements before substituting any candidate.
合规信息
The verified product record does not provide definitive component-level compliance statements. The required compliance status should be confirmed with Silicon Labs before qualification.