EP2C15AF256C7N - 14,448-LE Cyclone II FPGA | Altera
MPN: EP2C15AF256C7N ✗ जीवन की समाप्तिEP2C15AF256C7N अवलोकन
A field-programmable gate array is a semiconductor whose digital logic, interconnections, and configurable I/O are defined after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Cyclone II family combines logic elements, embedded memory, general-purpose I/O, and PLL-based clocking in one integrated device, allowing a board design to adapt to protocol or control requirements without changing the PCB.
The EP2C15AF256C7N provides 14,448 logic elements, 152 user I/O, 239,616 bits of embedded memory, and a 402.58 MHz listed operating frequency. Its 1.2 V core supply reduces power requirements compared with older FPGA generations, while the 256-FBGA package supports dense board layouts. The commercial temperature range makes it appropriate for indoor industrial equipment, laboratory instruments, embedded controllers, and general-purpose data-processing modules.
Cyclone II devices use configurable logic architecture for datapath and control logic, with embedded memory available for buffering and lookup functions. The 256-ball package provides a high pin count relative to earlier low-cost FPGAs, although ball pitch, exposed-pad requirements, and multilayer board construction must be considered during layout. Programming is normally performed through a JTAG-compatible configuration interface, with configuration data loaded from a nonvolatile memory device or another permitted source.
Typical uses include industrial I/O expansion, sensor acquisition, motor and machine control, communications bridges, data logging, and embedded protocol gateways. Its combination of 152 I/O and embedded memory allows multiple external interfaces and local data buffering to coexist in one package. Designs can also use FPGA logic to consolidate discrete control functions, shorten signal paths, and provide a field-update path for logic changes.
Board planning should follow the Cyclone II layout guidance for power, decoupling, configuration pins, clock routing, and high-speed I/O. Place core and I/O supply capacitors close to their designated balls, route configuration signals away from fast clocks, and provide all voltage rails simultaneously. The 256-FBGA footprint requires careful escape-routing planning and a PCB process capable of supporting its ball pitch.
This product page consolidates the core Cyclone II device characteristics, package constraints, lifecycle considerations, qualified family alternatives, and practical implementation guidance into one engineering-focused reference for design reviews and legacy-system maintenance.
के लिए ड्रॉप-इन विकल्प EP2C15AF256C7N — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं EP2C15AF256C7N (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Logic Elements, Operating Temperature Range, RoHS Status, Speed Grade.
EP2C15AF256A7N
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP2C15AF256I8N
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP2C15AF256C6N
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →EP2C15AF256C8N
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →EP2C15AF256M7N
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
EP2C15AF256C7N Maximum Ratings और Electrical Characteristics
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone II |
| Logic Elements | 14,448 elements |
| User I/O Count | 152 I/O |
| Embedded Memory | 239,616 bits |
| Maximum Operating Frequency | 402.58 MHz |
| Core Supply Voltage | 1.2 V |
| Package Type | 256-FBGA / 256-LBGA |
| Total Package Pins | 256 pins |
| Package Pin Count | 256 balls |
| ऑपरेटिंग तापमान रेंज | 0 to 85 degrees Celsius |
| माउंटिंग प्रकार | Surface mount |
EP2C15AF256C7N 256 balls पिन कॉन्फ़िगरेशन गाइड
EP2C15AF256C7N (256 balls पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: EP2C15AF256C7N.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
EP2C15AF256C7N के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Machine Control, Sensor and Data-Acquisition Systems, Communication Protocol Bridges, Programmable I/O Expansion, Test and Measurement Equipment, Data Logging and Storage Controllers.
Industrial Machine Control
The EP2C15AF256C7N fits legacy machine-control platforms that require deterministic programmable logic, a moderate pin count, and embedded buffering within a 1.2 V FPGA core architecture. Its 14,448 logic elements can implement sequencing, interlocks, motion-command generation, and diagnostic state machines, while 152 user I/O provide connections to sensors, actuators, encoders, and industrial digital interfaces. The 239,616 bits of embedded memory can hold position tables, captured waveforms, or communication buffers without relying entirely on external RAM. For an installed system, retain the Cyclone II power architecture, configuration memory, and Quartus-supported device settings so that maintenance changes do not introduce timing or configuration incompatibilities.
अनुशंसित
Sensor and Data-Acquisition Systems
The EP2C15AF256C7N can consolidate acquisition logic, channel control, thresholding, and data formatting into one Cyclone II device. Its 152 user I/O support multiple digital sensor inputs, triggers, and control signals, while the listed 402.58 MHz operating frequency provides substantial timing margin for parallel data capture and state-machine processing. The 239,616 bits of embedded memory allow sample buffering, calibration tables, or rolling trigger windows to be handled locally. A practical implementation should partition I/O into acquisition, trigger, and communication groups and keep clocked logic away from sensitive input nets. Configuration should remain isolated from high-speed acquisition paths, and power and ground distribution must satisfy the family's 1.2 V core and I/O supply requirements.
अनुशंसित
Communication Protocol Bridges
The EP2C15AF256C7N is suitable for legacy protocol bridges that need simultaneous interface handling, local buffering, and programmable protocol state machines. The 14,448 logic elements can support framing, checksum generation, byte stuffing, FIFO control, and command translation, while 152 I/O permit multiple parallel, serial, or legacy peripheral connections. Its embedded memory can absorb temporary frame storage and smooth traffic between unequal bus rates. Designers should use clock-domain-crossing structures when external interfaces operate at unrelated frequencies and should avoid deriving timing-critical signals directly from unconstrained routing. Because this is a mature architecture, validate the configuration file, pin assignments, and timing closure with the supported Altera tool flow before releasing a maintenance revision.
अनुशंसित
Programmable I/O Expansion
The EP2C15AF256C7N can add configurable logic and interface capacity to an embedded control board through its 152 user I/O. Useful functions include protocol conversion, discrete timing, latch and debounce logic, pulse generation, and status aggregation that would otherwise consume multiple discrete controllers. A 1.2 V core and a 256-FBGA package make the device suitable for compact boards where component count and routing flexibility matter. The principal layout constraint is the density of the 256-ball footprint, which requires controlled escape routing, adequate layer count, and careful ball assignment for power and high-speed signals. Confirm package ball maps and configuration requirements for the exact EP2C15AF256C7N ordering code before releasing artwork.
अनुशंसित
Test and Measurement Equipment
The EP2C15AF256C7N can implement sequencing, pattern generation, timing control, and data capture in legacy test equipment. Its 14,448 logic elements are suitable for coordinating multiple instrument functions, while the 402.58 MHz listed frequency supports synchronous control logic and moderately high-speed digital pattern generation. The 239,616 bits of embedded memory can be organized for capture windows, calibration records, or test-result buffering. High-speed analog instrumentation remains outside the FPGA's direct function, so the device should coordinate converters and interface electronics rather than replace them. Layout should separate sensitive measurement paths from digital activity, use controlled clock distribution, and follow the Cyclone II guidance for decoupling and configuration signal integrity.
अनुशंसित
Data Logging and Storage Controllers
The EP2C15AF256C7N can serve as the controller for compact data loggers by combining record formatting, buffer management, event timestamping, and storage-interface sequencing. Its 152 user I/O allow access to sensors, flash memory, status indicators, and an external communications link, while 239,616 bits of embedded memory can buffer blocks while writes occur. The 402.58 MHz listed operating frequency provides margin for parallel data movement and CRC or integrity calculations. Implementation should account for flash-program timing, error recovery, and deterministic arbitration between logging and communications. For long-life deployments, retain the original configuration method and validate the complete design against the selected temperature and power requirements rather than relying only on nominal FPGA clock performance.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा EP2C15AF256C7N — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | EP2C15AF256A7N | EP2C15AF256I8N | EP2C15AF256C6N | EP2C15AF256C8N | EP2C15AF256M7N |
|---|---|---|---|---|---|---|
| Package | 256-FBGA / 256-LBGA | 256-FBGA / 256-LBGA | 256-FBGA / 256-LBGA | 256-FBGA / 256-LBGA | 256-FBGA / 256-LBGA | 256-FBGA / 256-LBGA |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| FPGA Family | Cyclone II | Cyclone II | Cyclone II | Cyclone II | Cyclone II | Cyclone II |
| Logic Elements | 14,448 elements | 14,448 elements | 14,448 elements | 14,448 elements | 14,448 elements | 14,448 elements |
| User I/O Count | 152 I/O | 152 I/O | 152 I/O | 152 I/O | 152 I/O | 152 I/O |
| Embedded Memory | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits |
| Package Pin Count | 256 balls | 256 balls | 256 balls | 256 balls | 256 balls | 256 balls |
मुख्य विशेषताएँ
- Maintains the full EP2C15 logic and memory resource count (बनामEP2C15AF256I8N)
- Provides the same 152-I/O interface count in the same package (बनामEP2C15AF256A7N)
- Offers a defined 402.58 MHz listed operating point (बनामEP2C15AF256C6N)
- Combines control logic, embedded storage, and a dense 256-ball interface (बनामM2GL050-1VF400)
डिज़ाइन नोट्स
The 256-FBGA footprint requires deliberate escape-routing and layer-transition planning. Assign the most constrained external interfaces to accessible balls, route supply and ground connections directly to their designated balls, and avoid long stubs beneath the device. Follow the Cyclone II package and board-layout guidance for ball pitch, via construction, decoupling, and exposed thermal requirements. Validate the PCB stack-up with the assembler because assembly capability, not just schematic connectivity, determines whether the package can be reliably manufactured.
Provide the 1.2 V core supply and all required I/O and auxiliary rails using the family power-sequence and voltage-level requirements. Place the required core, I/O, and auxiliary decoupling capacitors close to their associated balls and use a low-impedance distribution plane for return current. Power-supply startup must satisfy the device's configuration requirements. Do not infer every I/O voltage from the 1.2 V core specification, because separate I/O banks can require different logic levels.
Keep configuration pins, clock inputs, and high-speed user interfaces away from noisy switching nodes, and route clocks over continuous planes with controlled impedance. Treat the configuration interface as critical logic that must remain accessible for programming or in-system reconfiguration. When mixing external clock domains, use the timing and clock-domain-crossing methods supported by the Cyclone II design flow rather than relying on combinational synchronizers.
Do not substitute a device solely because it is labeled 256-FBGA or EP2C15. Confirm the complete ordering code, speed suffix, temperature class, qualification status, core voltage, I/O standards, configuration behavior, and package drawing. A family-compatible alternative can still fail if its temperature range is too narrow or its speed grade is insufficient. For a cross-generation migration, budget for a new PCB footprint, timing requalification, toolchain changes, and regenerated configuration files.
अनुपालन जानकारी
No manufacturer compliance declarations were identified for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer or the supplier of the offered condition before procurement.