Altera

EP2C15AF256C7N - 14,448-LE Cyclone II FPGA | Altera

Артикул: EP2C15AF256C7N ✗ Снят с производства
1.2 V Vdss 256-FBGA / 256-LBGA Package 402.58 MHz Speed 239,616 bits Memory
MOQ: 1 |

EP2C15AF256C7N Обзор

The Altera EP2C15AF256C7N is a Cyclone II field-programmable gate array with 14,448 logic elements, 152 user I/O, and 239,616 bits of embedded memory in a 256-lead FBGA package. The device operates from a 1.2 V supply, has a listed maximum clock frequency of 402.58 MHz, and is specified for the 0 to 85 degrees Celsius commercial-temperature range. These parameters position it as a compact programmable-logic device for embedded control, data acquisition, communications, and industrial interface designs.

A field-programmable gate array is a semiconductor whose digital logic, interconnections, and configurable I/O are defined after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Cyclone II family combines logic elements, embedded memory, general-purpose I/O, and PLL-based clocking in one integrated device, allowing a board design to adapt to protocol or control requirements without changing the PCB.

The EP2C15AF256C7N provides 14,448 logic elements, 152 user I/O, 239,616 bits of embedded memory, and a 402.58 MHz listed operating frequency. Its 1.2 V core supply reduces power requirements compared with older FPGA generations, while the 256-FBGA package supports dense board layouts. The commercial temperature range makes it appropriate for indoor industrial equipment, laboratory instruments, embedded controllers, and general-purpose data-processing modules.

Cyclone II devices use configurable logic architecture for datapath and control logic, with embedded memory available for buffering and lookup functions. The 256-ball package provides a high pin count relative to earlier low-cost FPGAs, although ball pitch, exposed-pad requirements, and multilayer board construction must be considered during layout. Programming is normally performed through a JTAG-compatible configuration interface, with configuration data loaded from a nonvolatile memory device or another permitted source.

Typical uses include industrial I/O expansion, sensor acquisition, motor and machine control, communications bridges, data logging, and embedded protocol gateways. Its combination of 152 I/O and embedded memory allows multiple external interfaces and local data buffering to coexist in one package. Designs can also use FPGA logic to consolidate discrete control functions, shorten signal paths, and provide a field-update path for logic changes.

Board planning should follow the Cyclone II layout guidance for power, decoupling, configuration pins, clock routing, and high-speed I/O. Place core and I/O supply capacitors close to their designated balls, route configuration signals away from fast clocks, and provide all voltage rails simultaneously. The 256-FBGA footprint requires careful escape-routing planning and a PCB process capable of supporting its ball pitch.

This product page consolidates the core Cyclone II device characteristics, package constraints, lifecycle considerations, qualified family alternatives, and practical implementation guidance into one engineering-focused reference for design reviews and legacy-system maintenance.

Аналоги без доработки для EP2C15AF256C7N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EP2C15AF256C7N (тот же форм-фактор и посадочное место) — отличается по Device Type, Logic Elements, Operating Temperature Range, RoHS Status, Speed Grade.

Intel
Logic Elements: 14,448
RoHS Status: Compliant
Speed Grade: C8
Сравнить с EP2C15AF256C7N →
Altera
Device Type: FPGA (Field Programmable Gate Array)
Operating Temperature Range: -40°C to +100°C (industrial I8 grade; chipdig listing of 0°C to 85°C conflicts and is noted in validation)
RoHS Status: Compliant (N suffix, lead-free)
Сравнить с EP2C15AF256C7N →

EP2C15AF256A7N

✅ Прямая замена
Altera
📦 256-FBGA
Cyclone II field-programmable gate array (FPGA) · 14,448 LEs · 402.58 MHz · 152 I/Os · 1.2 V · 90 nm CMOS · 256-LBGA · FBGA-256

Уточнить цену

Открыть даташит →

EP2C15AF256I8N

✅ Прямая замена
Altera
📦 256-FBGA
FPGA (Field Programmable Gate Array) · Cyclone II (EP2C15) · 14448 · 239616 · 152 · FBGA-256 / 256-LBGA · LBGA

Уточнить цену

Открыть даташит →

EP2C15AF256C6N

✅ Прямая замена ⚠️ Характеристики не проверены
Altera
📦 256-FBGA
Cyclone II Field Programmable Gate Array (FPGA) · 14,448 cells · 152 I/O · 500 MHz · 1.2 V · 256-LBGA · 256 pins · Surface Mount

Уточнить цену

Открыть даташит →

EP2C15AF256C8N

✅ Прямая замена ⚠️ Характеристики не проверены
Intel
📦 256-FBGA
Cyclone II · 14,448 · 239,616 · 152 · 14448 · 256-LBGA (FBGA-256)

Уточнить цену

Открыть даташит →

EP2C15AF256M7N

✅ Прямая замена ⚠️ Характеристики не проверены
📦 256-FBGA
Same 14,448 logic elements, 152 user I/O, 239,616-bit memory, 7 speed suffix, and 256-FBGA footprint; the M ordering code changes temperature or qualification conditions without changing core resources.

📋 Справочный аналог (нет в каталоге)

EP2C15AF256C7N Максимальные параметры и электрические характеристики

Device Type Field Programmable Gate Array (FPGA)
FPGA Family Cyclone II
Logic Elements 14,448 elements
User I/O Count 152 I/O
Embedded Memory 239,616 bits
Maximum Operating Frequency 402.58 MHz
Core Supply Voltage 1.2 V
Package Type 256-FBGA / 256-LBGA
Total Package Pins 256 pins
Package Pin Count 256 balls
Диапазон рабочих температур 0 to 85 degrees Celsius
Тип монтажа Surface mount

Руководство по цоколевке EP2C15AF256C7N в корпусе 256 balls

Цоколевка для EP2C15AF256C7N (корпус 256 balls). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 256 balls для EP2C15AF256C7N

Нет подробных данных о распиновке для EP2C15AF256C7N.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

EP2C15AF256C7N подходит для 6 применениеs: Industrial Machine Control, Sensor and Data-Acquisition Systems, Communication Protocol Bridges, Programmable I/O Expansion, Test and Measurement Equipment, Data Logging and Storage Controllers.

🏭

Industrial Machine Control

The EP2C15AF256C7N fits legacy machine-control platforms that require deterministic programmable logic, a moderate pin count, and embedded buffering within a 1.2 V FPGA core architecture. Its 14,448 logic elements can implement sequencing, interlocks, motion-command generation, and diagnostic state machines, while 152 user I/O provide connections to sensors, actuators, encoders, and industrial digital interfaces. The 239,616 bits of embedded memory can hold position tables, captured waveforms, or communication buffers without relying entirely on external RAM. For an installed system, retain the Cyclone II power architecture, configuration memory, and Quartus-supported device settings so that maintenance changes do not introduce timing or configuration incompatibilities.

🧩

Sensor and Data-Acquisition Systems

The EP2C15AF256C7N can consolidate acquisition logic, channel control, thresholding, and data formatting into one Cyclone II device. Its 152 user I/O support multiple digital sensor inputs, triggers, and control signals, while the listed 402.58 MHz operating frequency provides substantial timing margin for parallel data capture and state-machine processing. The 239,616 bits of embedded memory allow sample buffering, calibration tables, or rolling trigger windows to be handled locally. A practical implementation should partition I/O into acquisition, trigger, and communication groups and keep clocked logic away from sensitive input nets. Configuration should remain isolated from high-speed acquisition paths, and power and ground distribution must satisfy the family's 1.2 V core and I/O supply requirements.

🌐

Communication Protocol Bridges

The EP2C15AF256C7N is suitable for legacy protocol bridges that need simultaneous interface handling, local buffering, and programmable protocol state machines. The 14,448 logic elements can support framing, checksum generation, byte stuffing, FIFO control, and command translation, while 152 I/O permit multiple parallel, serial, or legacy peripheral connections. Its embedded memory can absorb temporary frame storage and smooth traffic between unequal bus rates. Designers should use clock-domain-crossing structures when external interfaces operate at unrelated frequencies and should avoid deriving timing-critical signals directly from unconstrained routing. Because this is a mature architecture, validate the configuration file, pin assignments, and timing closure with the supported Altera tool flow before releasing a maintenance revision.

🔧

Programmable I/O Expansion

The EP2C15AF256C7N can add configurable logic and interface capacity to an embedded control board through its 152 user I/O. Useful functions include protocol conversion, discrete timing, latch and debounce logic, pulse generation, and status aggregation that would otherwise consume multiple discrete controllers. A 1.2 V core and a 256-FBGA package make the device suitable for compact boards where component count and routing flexibility matter. The principal layout constraint is the density of the 256-ball footprint, which requires controlled escape routing, adequate layer count, and careful ball assignment for power and high-speed signals. Confirm package ball maps and configuration requirements for the exact EP2C15AF256C7N ordering code before releasing artwork.

📺

Test and Measurement Equipment

The EP2C15AF256C7N can implement sequencing, pattern generation, timing control, and data capture in legacy test equipment. Its 14,448 logic elements are suitable for coordinating multiple instrument functions, while the 402.58 MHz listed frequency supports synchronous control logic and moderately high-speed digital pattern generation. The 239,616 bits of embedded memory can be organized for capture windows, calibration records, or test-result buffering. High-speed analog instrumentation remains outside the FPGA's direct function, so the device should coordinate converters and interface electronics rather than replace them. Layout should separate sensitive measurement paths from digital activity, use controlled clock distribution, and follow the Cyclone II guidance for decoupling and configuration signal integrity.

🖥️

Data Logging and Storage Controllers

The EP2C15AF256C7N can serve as the controller for compact data loggers by combining record formatting, buffer management, event timestamping, and storage-interface sequencing. Its 152 user I/O allow access to sensors, flash memory, status indicators, and an external communications link, while 239,616 bits of embedded memory can buffer blocks while writes occur. The 402.58 MHz listed operating frequency provides margin for parallel data movement and CRC or integrity calculations. Implementation should account for flash-program timing, error recovery, and deterministic arbitration between logging and communications. For long-life deployments, retain the original configuration method and validate the complete design against the selected temperature and power requirements rather than relying only on nominal FPGA clock performance.

What are the key specifications of EP2C15AF256C7N that engineers should know?
The EP2C15AF256C7N is a Cyclone II FPGA with 14,448 logic elements, 152 user I/O, 239,616 bits of embedded memory, and a listed maximum frequency of 402.58 MHz. It uses a 1.2 V core supply and is packaged in a 256-FBGA configuration for a 0 to 85 degrees Celsius commercial operating range. According to the Cyclone II device documentation, these figures define the device as a mid-density programmable-logic platform for control, communications, and embedded data-processing systems.
Where to download the EP2C15AF256C7N datasheet PDF?
The manufacturer Cyclone II handbook is the appropriate document for obtaining the device family electrical characteristics, package information, configuration guidance, and pin descriptions. The EP2C15AF256C7N is specifically identified as a 14,448-logic-element device with 152 user I/O in a 256-FBGA package. Use the manufacturer handbook rather than a generic cross-reference page when designing power rails, configuration circuitry, or PCB escape routing for this legacy FPGA.
Where can I find the EP2C15AF256C7N pinout?
The EP2C15AF256C7N pinout is organized as 256 package balls in the Cyclone II 256-FBGA mechanical and pin-assignment documentation. Because BGA ball assignments depend on the exact device variant, use the manufacturer tables for the EP2C15AF256C7N rather than assigning pins from a generic 256-ball drawing. Configuration pins, power balls, ground balls, and user I/O must all be cross-checked against the selected board schematic before routing.
What is the operating voltage of EP2C15AF256C7N?
The EP2C15AF256C7N operates from a 1.2 V core supply. According to the Cyclone II device documentation, the 1.2 V figure refers to the core operating voltage and should not be treated as the only voltage required by every I/O bank. The complete design must also satisfy the family requirements for I/O supplies, auxiliary power, configuration voltage, sequencing, decoupling, and power-source startup behavior.
What is the operating temperature range of EP2C15AF256C7N?
The EP2C15AF256C7N is specified for a commercial operating range of 0 to 85 degrees Celsius. The device family documentation identifies the FPGA as a 1.2 V Cyclone II part in a 256-FBGA package. When selecting this device for an enclosure, calculate the internal board temperature rather than relying only on ambient temperature, and verify that power-supply dissipation and nearby heat sources do not push the package beyond the specified range.
Is EP2C15AF256C7N suitable for industrial control applications?
The EP2C15AF256C7N can support industrial control applications that remain within its 0 to 85 degrees Celsius commercial-temperature specification. Its 14,448 logic elements, 152 user I/O, and 239,616 bits of embedded memory suit machine controls, acquisition systems, and communication gateways. For installations with extended temperature exposure, vibration, long-term supply constraints, or automotive qualification requirements, review the appropriate industrial or qualified family variant and enclosure thermal design.
EP2C15AF256C7N vs EP2C15AF256A7N - which is better for a new design?
The EP2C15AF256C7N and EP2C15AF256A7N belong to the same EP2C15 Cyclone II family and use the same 256-FBGA footprint, with the same 14,448 logic elements and 152 user I/O. Their ordering suffixes must be checked against the manufacturer's device table before choosing one because they can represent different qualification or commercial conditions. The EP2C15AF256C7N is the specified target for this page, while the alternative can provide a family-level migration path when its exact electrical and qualification ratings are verified.
When should I choose EP2C15AF256C7N over a newer FPGA?
Choose EP2C15AF256C7N when an existing Cyclone II board must be maintained, a verified design already targets its 256-FBGA footprint, or its 14,448 logic elements and 152 user I/O meet the system requirements. A newer FPGA should be selected when lower power, better performance, more memory, improved tool support, or a current supply commitment is more important than avoiding board and firmware redesign. Migrating to a newer device generally requires pin, voltage, timing, and toolchain validation.
Can EP2C15AF256I8N replace EP2C15AF256C7N?
The EP2C15AF256I8N is a Cyclone II family alternative with the same EP2C15 logic density, 256-FBGA footprint, 14,448 logic elements, and 152 user I/O. It is not automatically interchangeable because the I8N ordering code indicates different device conditions or grades that must be checked for temperature range, speed, qualification, and ordering validity. Use the manufacturer ordering guide to confirm electrical equivalence before substituting it in production hardware.
What can replace EP2C15AF256C7N on the same PCB?
The closest direct replacement candidates are qualified EP2C15AF256 family members using the same 256-FBGA footprint, including EP2C15AF256A7N and EP2C15AF256I8N. A replacement is truly drop-in only after confirming pin functions, core and I/O voltage requirements, speed grade, temperature range, configuration behavior, and package drawing. Cyclone IV, Cyclone V, Cyclone 10, MAX 5, and MAX 10 devices are not established as footprint-compatible replacements, so they normally require PCB and design migration.
What is the best Altera equivalent for EP2C15AF256C7N?
The best Altera-family equivalent is another EP2C15AF256 device in the 256-FBGA package when its ordering suffix preserves the required speed, temperature, qualification, and electrical characteristics. EP2C15AF256A7N and EP2C15AF256I8N are the relevant family-level candidates because they retain the 14,448 logic elements, 152 user I/O, and 256-ball footprint. No cross-manufacturer device was established as a pin-compatible drop-in replacement, so a complete cross-family migration requires a new footprint and design qualification.
Where to buy EP2C15AF256C7N online?
Use the Request a Quote form on this page to request EP2C15AF256C7N availability, current lead time, and minimum order quantity. Because the Cyclone II family is a mature platform, buyers should confirm lifecycle status, original-package condition, traceability, and whether the quoted inventory is factory-new or another condition. Attach the exact suffix and target package when requesting a quotation to avoid mismatched FP2C15AF256-family variants.
What is the price of EP2C15AF256C7N?
The current commercial price for EP2C15AF256C7N should be requested through the Request a Quote form on this page. The submitted line item must use the complete EP2C15AF256C7N ordering code and 256-FBGA package because related Cyclone II devices can have different speed grades, temperature ratings, or qualification terms. A quotation response can also clarify stock status, minimum order quantity, estimated lead time, and supported shipping options for the selected condition.
What is the lead time for EP2C15AF256C7N?
The current lead time for EP2C15AF256C7N is best confirmed through the Request a Quote form on this page. Lead time depends on remaining factory inventory, package condition, traceability documentation, order quantity, and whether the requested units are new-production or legacy stock. Include the target annual usage and required certification documents in the request so the supply response reflects the intended procurement rather than only a generic unit count.
Is EP2C15AF256C7N in stock?
Stock availability for EP2C15AF256C7N must be confirmed through the Request a Quote form on this page because mature FPGA inventory can change quickly and may vary by package condition and quantity. Provide the exact MPN, required quantity, acceptable date code, and required traceability level. A confirmed inventory response should also state the estimated delivery schedule, allowing procurement to determine whether an alternate EP2C15AF256 ordering code is necessary for production continuity.

Справочные инженерные данные для EP2C15AF256C7N — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose EP2C15AF256C7N for maintenance, replication, or extension of an existing Cyclone II design that uses the 256-FBGA footprint and relies on its 14,448 logic elements, 152 user I/O, and 239,616 bits of embedded memory. Select EP2C15AF256A7N or EP2C15AF256I8N when their ordering-code temperature, speed, and qualification conditions meet the production requirements, but verify those conditions before release. EP2C15AF256C6N is appropriate when a lower speed grade is sufficient; EP2C15AF256C8N may suit designs requiring a higher grade after timing review. Do not treat newer Cyclone, MAX, or competing FPGA families as drop-in alternatives. Moving to a newer device usually requires a new board, different tools, new configuration data, and complete timing, power, I/O, and functional verification.

Сравнение с аналогами

Параметр Этот товар EP2C15AF256A7N EP2C15AF256I8N EP2C15AF256C6N EP2C15AF256C8N EP2C15AF256M7N
Package 256-FBGA / 256-LBGA 256-FBGA / 256-LBGA 256-FBGA / 256-LBGA 256-FBGA / 256-LBGA 256-FBGA / 256-LBGA 256-FBGA / 256-LBGA
Brand Altera Altera Altera Altera Altera Altera
FPGA Family Cyclone II Cyclone II Cyclone II Cyclone II Cyclone II Cyclone II
Logic Elements 14,448 elements 14,448 elements 14,448 elements 14,448 elements 14,448 elements 14,448 elements
User I/O Count 152 I/O 152 I/O 152 I/O 152 I/O 152 I/O 152 I/O
Embedded Memory 239,616 bits 239,616 bits 239,616 bits 239,616 bits 239,616 bits 239,616 bits
Package Pin Count 256 balls 256 balls 256 balls 256 balls 256 balls 256 balls

Ключевые отличия

  • Maintains the full EP2C15 logic and memory resource count (против EP2C15AF256I8N)
  • Provides the same 152-I/O interface count in the same package (против EP2C15AF256A7N)
  • Offers a defined 402.58 MHz listed operating point (против EP2C15AF256C6N)
  • Combines control logic, embedded storage, and a dense 256-ball interface (против M2GL050-1VF400)

Заметки по проектированию

The 256-FBGA footprint requires deliberate escape-routing and layer-transition planning. Assign the most constrained external interfaces to accessible balls, route supply and ground connections directly to their designated balls, and avoid long stubs beneath the device. Follow the Cyclone II package and board-layout guidance for ball pitch, via construction, decoupling, and exposed thermal requirements. Validate the PCB stack-up with the assembler because assembly capability, not just schematic connectivity, determines whether the package can be reliably manufactured.

Provide the 1.2 V core supply and all required I/O and auxiliary rails using the family power-sequence and voltage-level requirements. Place the required core, I/O, and auxiliary decoupling capacitors close to their associated balls and use a low-impedance distribution plane for return current. Power-supply startup must satisfy the device's configuration requirements. Do not infer every I/O voltage from the 1.2 V core specification, because separate I/O banks can require different logic levels.

Keep configuration pins, clock inputs, and high-speed user interfaces away from noisy switching nodes, and route clocks over continuous planes with controlled impedance. Treat the configuration interface as critical logic that must remain accessible for programming or in-system reconfiguration. When mixing external clock domains, use the timing and clock-domain-crossing methods supported by the Cyclone II design flow rather than relying on combinational synchronizers.

Do not substitute a device solely because it is labeled 256-FBGA or EP2C15. Confirm the complete ordering code, speed suffix, temperature class, qualification status, core voltage, I/O standards, configuration behavior, and package drawing. A family-compatible alternative can still fail if its temperature range is too narrow or its speed grade is insufficient. For a cross-generation migration, budget for a new PCB footprint, timing requalification, toolchain changes, and regenerated configuration files.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No manufacturer compliance declarations were identified for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer or the supplier of the offered condition before procurement.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

EP2C15AF256C7N EP2C15AF256C7N datasheet EP2C15AF256C7N pinout EP2C15AF256C7N datasheet pdf EP2C15AF256C7N equivalent EP2C15AF256C7N replacement EP2C15AF256C7N cross reference Altera EP2C15AF256C7N EP2C15AF256C7N 256 FBGA EP2C15AF256C7N 14448 logic elements EP2C15AF256C7N 152 user IO EP2C15AF256C7N price EP2C15AF256C7N stock EP2C15AF256C7N vs EP2C15AF256I8N

Связанные компоненты & термины

Altera Intel EP2C15AF256C7N EP2C15AF256A7N EP2C15AF256I8N Cyclone II FPGA field-programmable gate array programmable logic device semiconductor logic element embedded memory user I/O 256-FBGA FBGA package family surface-mount package 1.2 V core supply 402.58 MHz JTAG industrial control data acquisition protocol bridging data logging Cyclone II device documentation
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ