EP4CE15F23C9LN - 15,408-LCE Cyclone IV E FPGA | Altera
MPN: EP4CE15F23C9LN ✓ सक्रियEP4CE15F23C9LN अवलोकन
A field-programmable gate array, or FPGA, is a digital integrated circuit whose logic functions are configured after manufacture. An FPGA sits between fixed-function application-specific integrated circuits and software-programmable processors. It provides parallel hardware implementation, configurable interface routing, and reusable programmable logic for systems requiring adaptable control, data acquisition, communications, or signal-processing functions.
The EP4CE15F23C9LN provides 15,408 logic cells and 343 I/O pins. These resources allow multiple control paths, state machines, counters, interfaces, and data-processing functions to be implemented concurrently. Its 516,096-bit configuration memory supports device programming, while the 1.2 V core supply reflects the low-voltage architecture used by the Cyclone IV E family.
Altera identifies the device as the F23 package combination within the Cyclone IV E EP4CE15 product line. The ordering information includes the EP4CE15 device identifier, F23 package designation, C9 performance designation, and N ordering suffix. These encoded fields determine the device variant and should be checked against the original design requirements before substitution.
Typical implementation areas include industrial control and automation, communications equipment, embedded instrumentation, digital signal processing, and general-purpose prototyping. The 343 available I/O positions are particularly relevant to systems that combine parallel external buses, control signals, status indicators, and high-speed serial interfaces implemented through dedicated transceiver resources.
PCB design must account for the dense 484-pin FBGA land pattern, power-supply integrity, configuration access, decoupling, and thermal performance. Because BGA routing is not visible during inspection, use the manufacturer package drawing for ball locations and follow the Altera power, decoupling, and configuration guidelines rather than estimating connectivity from the ordering code.
This product page combines the Altera family specifications, distributor listing details, ordering-code interpretation, and practical BGA design considerations in one searchable reference. It supports engineers comparing logic capacity, I/O availability, package compatibility, and replacement requirements before finalizing an FPGA selection.
के लिए ड्रॉप-इन विकल्प EP4CE15F23C9LN — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं EP4CE15F23C9LN (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, I/O Count, Mounting Type, Logic Cells, Package.
EP4CE15F23C9L
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP4CE15F23C6N
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP4CE15F23C9LN Maximum Ratings और Electrical Characteristics
| Device Type | Cyclone IV E field-programmable gate array |
| Logic Cells | 15,408 logic cells |
| I/O Count | 343 I/O pins |
| Configuration Memory | 516,096 bits |
| Core Supply Voltage | 1.2 V |
| पैकेज | 484-pin FBGA |
| Package Designation | F23 |
| Device Designator | EP4CE15 |
| Speed Designator | C9 |
| Ordering Suffix | N |
| Programmable Logic | FPGA configurable logic |
| माउंटिंग प्रकार | Surface-mount FBGA |
EP4CE15F23C9LN f23 पिन कॉन्फ़िगरेशन गाइड
EP4CE15F23C9LN (f23 पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: EP4CE15F23C9LN.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
EP4CE15F23C9LN के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controllers, Communications Signal Processing, Data Acquisition and Instrumentation, Embedded Video Processing, Programmable Test Equipment, Aerospace Ground Equipment.
Industrial Automation Controllers
The EP4CE15F23C9LN fits parallel industrial-control systems that combine sensor conditioning, machine-state logic, communication formatting, and actuator sequencing. Its 15,408 logic cells allow multiple control paths to operate concurrently instead of relying on a single processor loop, while 343 I/O pins provide substantial connectivity for digital inputs, outputs, interlocks, and status indicators. Designers can implement deterministic hardware control beside communications or diagnostics without splitting the design across multiple programmable devices. The 484-pin FBGA supports dense board layouts, although its fine pitch requires careful escape routing, layer-stack planning, and controlled assembly.
Communications Signal Processing
The EP4CE15F23C9LN is appropriate for programmable protocol handling, packet filtering, test-pattern generation, and fixed-rate signal processing in communications equipment. Parallel logic resources can maintain multiple channels or pipeline stages, and the 343 I/O positions support external memory interfaces, control signals, and high-speed serial transceiver connections. Placing the FPGA close to network or serial-interface circuitry can reduce routing delay and improve implementation predictability. Designers should use the C9 performance grade for demanding timing paths and base board-level decisions on the manufacturer's recommended power, decoupling, and configuration implementation.
Data Acquisition and Instrumentation
The EP4CE15F23C9LN supports instrumentation designs that gather multiple digital inputs, perform timing or protocol conversion, and transfer results to an embedded processor. Its 15,408 logic cells can implement counters, trigger logic, filters, calibration tables, and communication state machines in parallel, while 343 I/O pins provide room for sensor interfaces and control outputs. A hardware implementation can reduce processing latency and produce deterministic acquisition timing. For high-performance analog conversion, use the C9 grade and validate every input, output, and clock timing constraint against the actual system clock tree.
Embedded Video Processing
The EP4CE15F23C9LN can implement preprocessing functions such as pixel formatting, timing generation, region detection, synchronization, and control for embedded display systems. Parallel logic resources are useful for continuous pixel-stream processing, while 343 I/O positions permit flexible connections to image sensors, display controllers, and memory interfaces when the required interface resources are present. The FPGA can also implement deterministic timing independently of a higher-level processor. Because the device has a dense FBGA package and a 1.2 V core supply, power integrity and thermal design must be validated before high-volume deployment.
Programmable Test Equipment
The EP4CE15F23C9LN is suitable for programmable test and measurement logic where patterns, sequencing, stimulus generation, and response capture must be coordinated precisely. The 15,408 logic cells support parallel test channels and reusable state machines, while 343 I/O pins provide broad connectivity to fixtures and converters. FPGA-based sequencing can produce repeatable timing and simplify instrumentation changes that would otherwise require dedicated hardware. The C9 performance designation should be selected when timing margins are tight, and engineers should verify all clock constraints, I/O standards, configuration pins, and thermal conditions before production.
Aerospace Ground Equipment
The EP4CE15F23C9LN can support ground-based test and simulation equipment used during aerospace component development. Its programmable architecture allows engineers to implement interface conversion, fault injection, timing checks, and status decoding without changing the system for every new test article. The large logic-cell and I/O resources support parallel stimulus and response handling, while the FPGA configuration mechanism permits reusable firmware updates. The final aerospace suitability must be based on the exact ordering attributes, operating-temperature limits, screening requirements, and system reliability needs rather than the Cyclone IV family name alone.
के लिए इंजीनियरिंग संदर्भ डेटा EP4CE15F23C9LN — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | EP4CE15F23C9L | EP4CE15F23C6N |
|---|---|---|---|
| Brand | Altera | Altera | Altera |
| Package | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA |
| Device Family | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Logic Cells | 15,408 | 15,408 | 15,408 |
| I/O Count | 343 | 343 | 343 |
| Configuration Memory | 516,096 bits | 516,096 bits | 516,096 bits |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| Performance Designator | C9 | C9 | C6 |
| Package Designator | F23 | F23 | F23 |
मुख्य विशेषताएँ
- C9 performance designation preserves the target's timing class (बनामEP4CE15F23C6N)
- Exact EP4CE15 and F23 device-package identity (बनामEP4CE15F23C6N)
- Closest ordering-code match (बनामEP4CE15F23C9L)
डिज़ाइन नोट्स
Use the Altera F23 package drawing as the authority for every one of the 484 FBGA ball locations, power domains, ground balls, configuration pins, and user I/O assignments. Match the PCB pad array, solder-mask definition, and paste stencil to that drawing rather than a generic 484-BGA footprint. Confirm that the escape-routing layers can support the selected I/O standards without introducing excessive length matching or crosstalk.
Implement the manufacturer's recommended 1.2 V core-supply network with local high-frequency decoupling placed close to the device's supply and ground balls. Separate or carefully isolate analog-sensitive circuitry from the FPGA's switching supply return path where noise limits apply. Because the exact recommended capacitor values and voltage limits are not shown in the product summary, verify them in the EP4CE15F23 datasheet and power-supply design guidance before schematic release.
Assign external clock, high-speed serial, and memory-interface pins according to the F23 device constraints, and preserve the intended clock topology through the PCB stack-up. Use the device pin report generated by the FPGA design tool to prevent accidental I/O-standard conflicts. Keep configuration pins and dedicated pins consistent with the programming file, and validate all timing paths after changing the performance grade from C9 to C6.
Estimate FPGA power from the actual design activity rather than treating the 1.2 V supply value as device dissipation. Estimated: core dissipation equals 1.2 V multiplied by measured core current, while total board heating must also include I/O and auxiliary power domains. Compare that estimate with the package thermal data and board thermal solution; use a via field, copper area, or external thermal solution when the calculated rise exceeds the design limit.
अनुपालन जानकारी
Compliance attributes are not stated in the product records used for this page and remain unknown rather than being inferred from the FPGA family.