Renesas Electronics

ICS507M-01 - PECL Clock Synthesizer | Renesas | 16-SOIC

MPN: ICS507M-01 ✓ सक्रिय
16-pin SOIC Package 10 MHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

ICS507M-01 अवलोकन

Renesas ICS507M-01 is a PECL clock synthesizer and differential crystal oscillator circuit packaged in a 16-pin SOIC. It combines an external fundamental-mode crystal with internal frequency multiplication to produce a differential PECL clock. According to the Renesas 507-01 datasheet, a 10 MHz crystal connected to the ICS507-01 with the 12X output selected by S1=0 and S0=1 produces a 120 MHz PECL output clock. The part therefore serves as a clock-generation and timing IC rather than a conventional general-purpose oscillator.

A crystal-based clock synthesizer provides a controlled relationship between a stable low-frequency reference and one or more higher-frequency outputs. This clock-generation approach is useful when a system needs a local timing reference without relying on a separate external clock generator. Differential PECL outputs are suited to high-speed digital interconnects because they can offer good noise immunity and signal-integrity characteristics when implemented with correct termination and routing.

The ICS507-01 family supports selectable frequency multiplication, allowing a single crystal frequency to serve several clocking requirements. The documented 10 MHz-to-120 MHz example demonstrates a 12X multiplication ratio. Selection inputs S1 and S0 determine the active multiplier, while the crystal and external support components establish the operating frequency and stability. Exact output frequency ranges, tolerance limits, supply voltage, operating temperature, jitter, and output rise/fall times must be taken from the manufacturer datasheet before final design release.

The 16-pin SOIC package is used in a differential clock topology that includes a crystal, supply bypass components, mode-setting inputs, and output circuitry. Layout is especially important because unequal or overly long clock traces can degrade edge quality and introduce deterministic or random jitter. Differential pair routing, solid return paths, controlled impedance, and short output connections should be treated as core layout requirements rather than optional refinements.

Typical uses include telecom line-card timing, network-interface clock generation, instrumentation, test-and-measurement equipment, industrial control, and other systems requiring a local high-frequency reference clock. In each case, the crystal frequency, selected multiplier, output standard, supply requirements, and downstream receiver timing must be checked together before the component is committed to a PCB.

The principal design consideration is to validate the complete clock path at the target frequency. Start with the manufacturer reference topology, use the documented crystal and termination values, and preserve symmetrical differential routing. Decoupling should be placed directly beside the supply pins, mode-selection logic must remain stable during operation, and unused outputs require the termination strategy specified by the manufacturer. The SOIC outline and pin numbering should also be checked against the specific ordering code and assembly variant used in the BOM.

This page organizes the confirmed ICS507M-01 clocking characteristics, practical PCB guidance, documented multiplier example, and verified drop-in candidates into an engineering-focused selection resource. It supports early architecture and sourcing decisions while directing final component validation to the Renesas manufacturer datasheet.

के लिए ड्रॉप-इन विकल्प ICS507M-01 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

ICS507M-01I

✅ ड्रॉप-इन
📦 16-SOIC
Same 16-SOIC clock-synthesizer format; ordering grade and marking differ by 0 in the industrial suffix, while verified numerical electrical differences require datasheet confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ICS507M-01ILF

✅ ड्रॉप-इन
📦 16-SOIC
Same 16-SOIC family and functional block; LF identifies the orderable packing configuration rather than a change of the 10 MHz-to-120 MHz multiplication function.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ICS507M-01IT

✅ ड्रॉप-इन
📦 16-SOIC
Same 16-SOIC clock-generator architecture; T identifies the orderable configuration, with no verified change to the 12X multiplier function.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ICS507M-01ILFT

✅ ड्रॉप-इन
📦 16-SOIC
Same 16-SOIC family and clock-synthesizer function; industrial, lead-free, and tape-and-reel identifiers do not alter the documented 12X multiplication behavior.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

507M-01LF

✅ ड्रॉप-इन
📦 16-SOIC
Compatibility data identifies matching terminals, 16-SOIC package, and primary PECL clock-synthesizer characteristics; frequency and temperature limits still require direct comparison.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ICS507M-01 विशेषताएं

Product Type PECL clock synthesizer and differential crystal oscillator
Manufacturer Renesas Electronics
Output Logic Standard PECL
आउटपुट कॉन्फ़िगरेशन Differential
Reference Input External fundamental-mode crystal
Documented Crystal Frequency 10 MHz
Documented Multiplier Setting 12X with S1=0 and S0=1
Documented Output Frequency 120 MHz
पैकेज 16-pin SOIC
माउंटिंग प्रकार Surface mount

ICS507M-01 16-pin soic पिन कॉन्फ़िगरेशन गाइड

ICS507M-01 (16-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ICS507M-01 के लिए 16-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ICS507M-01.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ICS507M-01 के लिए उपयुक्त है 6 अनुप्रयोगs: Telecom Line-Card Clock Generation, Network Interface Timing, Industrial Control Clocking, Instrumentation and Test Equipment, High-Speed Digital Backplane, Embedded Communication Equipment.

🌐

Telecom Line-Card Clock Generation

The ICS507M-01 is appropriate for a telecom line card that needs a local differential clock derived from a stable crystal reference. Its documented 10 MHz crystal and 12X setting produce a 120 MHz PECL output, illustrating how one reference can support a higher-frequency internal clock. The circuit should follow the manufacturer reference topology, use the specified crystal network, and provide controlled-impedance differential routing. PECL output characteristics must match the receiver’s supply, termination, and input-capacitance requirements. Because clock jitter can affect downstream data recovery, validate the complete crystal-and-clock path against the system timing budget before production release.

🌐

Network Interface Timing

The ICS507M-01 can provide a differential PECL timing source for network-interface or backplane circuitry when a local crystal-based clock is preferred. The documented 12X multiplication path allows a 10 MHz reference to support a 120 MHz clock, reducing the number of unrelated external oscillators in a multi-rail design. The output network must preserve differential symmetry, provide a continuous return path, and observe the recommended PECL termination. Designers should also check output frequency tolerance, edge rate, and jitter against the receiving logic rather than relying only on nominal frequency.

🏭

Industrial Control Clocking

The ICS507M-01 fits industrial control systems that need a deterministic differential clock close to high-speed digital logic. Its selectable multiplier architecture lets one crystal reference serve a defined clock frequency, and the documented S1=0, S0=1 setting demonstrates 12X multiplication from 10 MHz to 120 MHz. Place bypass capacitance close to the supply pins and isolate the oscillator section from switching nodes and high-current outputs. For production equipment, confirm the operating-temperature grade, crystal aging characteristics, and total jitter contribution against the controller’s timing specification.

🔧

Instrumentation and Test Equipment

The ICS507M-01 can serve as the clock source in instrumentation and test equipment requiring a stable differential PECL signal. The external-crystal architecture supports controlled frequency selection, while the 12X multiplier example enables a 120 MHz output from a 10 MHz crystal. Measurement accuracy depends on the crystal’s frequency tolerance and aging as well as the circuit’s jitter, so the clock path should be characterized in the final enclosure and with the intended load. Use short outputs, correct terminations, and a clean reference supply to prevent switching or loading effects from obscuring the source performance.

🖥️

High-Speed Digital Backplane

The ICS507M-01 is suitable for local clock distribution within a high-speed digital backplane when differential PECL clocking is used. A 10 MHz crystal and the documented 12X mode can produce a 120 MHz clock for nearby receivers, avoiding a long distribution path back to a central oscillator. Differential pair geometry, impedance, return-path continuity, and output termination must be controlled to preserve edge quality. Keep the oscillator’s crystal loop compact and keep its supply return independent of noisy load currents. Validate clock-to-data timing and jitter at each receiver rather than assuming nominal frequency is sufficient.

📡

Embedded Communication Equipment

The ICS507M-01 can support embedded communication equipment that requires a local high-frequency clock and differential PECL interface. Its selectable multiplier function allows a single crystal reference to generate a higher clock frequency, with 120 MHz demonstrated from a 10 MHz crystal. In a mixed-signal or switching environment, decouple the clock supply locally and route the differential output away from power-converter nodes. Review the maximum output frequency, minimum supply voltage, temperature range, and termination requirements in the manufacturer datasheet to ensure the selected ordering variant remains valid across the product’s environmental conditions.

अनुशंसित उत्पादों का सारांश

ICS507M-01I Same-family clock synthesizer उपयोग में: Telecom Line-Card Clock Generation, Industrial Control Clocking, Embedded Communication Equipment 507M-01LF Compatible 16-SOIC clock-synthesizer configuration उपयोग में: Telecom Line-Card Clock Generation, Instrumentation and Test Equipment ICS507M-01ILF Same-family orderable configuration उपयोग में: Network Interface Timing, High-Speed Digital Backplane ICS507M-01IT Same-family orderable configuration उपयोग में: Network Interface Timing, High-Speed Digital Backplane ICS507M-01ILFT Same-family orderable configuration उपयोग में: Industrial Control Clocking, Embedded Communication Equipment ICS507M-01T Same-family orderable configuration उपयोग में: Instrumentation and Test Equipment
What is the ICS507M-01 clock synthesizer used for?
The ICS507M-01 is a PECL clock synthesizer that uses an external fundamental-mode crystal to generate a higher-frequency differential clock. According to the Renesas 507-01 datasheet, a 10 MHz crystal with the 12X multiplier selected by S1=0 and S0=1 produces a 120 MHz PECL output clock. It is suitable for telecom, industrial, instrumentation, and network equipment requiring a local high-speed timing reference.
How do I generate a 120 MHz clock with the ICS507M-01?
A 120 MHz clock is generated by connecting a 10 MHz fundamental-mode crystal and selecting the 12X multiplier. The Renesas 507-01 datasheet specifically identifies S1=0 and S0=1 for this setting. Use the manufacturer's crystal-load, supply-bypass, decoupling, and output-termination recommendations so that the selected multiplier produces a stable 120 MHz differential PECL output.
Where can I download the ICS507M-01 datasheet PDF?
The official Renesas 507-01 datasheet is available from the manufacturer's document page at https://www.renesas.com/en/document/dst/507-01-datasheet. It is the controlling reference for the ICS507M-01 architecture, crystal interface, multiplier selection, electrical characteristics, pin functions, package outline, and recommended application circuit. Use the manufacturer PDF for design release rather than a distributor-generated copy.
What is the ICS507M-01 pinout?
The ICS507M-01 uses a 16-pin SOIC, but the publicly listed result does not reproduce a complete pin-description table. Use the pin-description table in the Renesas 507-01 datasheet when assigning supply, crystal, selection-input, ground, and differential-output connections. Do not infer unused-pin treatment from a distributor page, and verify the package drawing against the selected ordering code before PCB release.
What are the key specifications of ICS507M-01 that engineers should know?
The confirmed ICS507M-01 characteristics are its PECL differential clock output, use of an external fundamental-mode crystal, selectable frequency multiplication, and 16-pin SOIC package. The manufacturer documents a 10 MHz crystal producing a 120 MHz output when 12X multiplication is selected with S1=0 and S0=1. Supply limits, jitter, tolerance, temperature range, and edge-rate limits should be read from the manufacturer datasheet.
ICS507M-01 vs ICS507M-01I - which one is the drop-in choice?
The ICS507M-01I is the closest same-brand alternative identified for the ICS507M-01 and is listed as a clock generator, PLL, and frequency synthesizer with the same 16-SOIC format. For a new design, verify the exact temperature grade, ordering suffix, and marking requirements against the Renesas datasheet before treating it as a drop-in replacement. The two orderable variants may differ in qualification rather than electrical function.
Can the 507M-01LF replace the ICS507M-01?
The 507M-01LF is reported as a complete replacement for the ICS507M-01 because its terminals, package, and principal clock-synthesizer characteristics are consistent. It is listed in a 16-SOIC format, making it the most directly supported cross-reference candidate. Final substitution still requires checking the crystal interface, multiplier settings, supply voltage, frequency range, and temperature grade against the approved manufacturer documentation.
What is the best drop-in replacement for ICS507M-01?
The 507M-01LF is the best-supported drop-in candidate because a compatibility listing identifies matching terminals, package, and primary performance characteristics. Same-brand Renesas variants such as ICS507M-01I and ICS507M-01ILFT provide additional sourcing paths, but temperature and packing variants must be confirmed against the assembly requirements. Avoid choosing a replacement solely by the SOIC outline.
When should I choose ICS507M-01 over a discrete oscillator solution?
Choose the ICS507M-01 when the design benefits from selectable multiplication of one external crystal reference and requires differential PECL outputs. A discrete oscillator may be simpler when a single fixed output frequency is sufficient and does not need the family’s selection inputs. The decision should account for crystal accuracy, output-edge quality, jitter, supply design, and whether the downstream system benefits from differential clocking.
Is ICS507M-01 suitable for telecom line-card timing?
The ICS507M-01 is suitable for telecom timing when the required output frequency, clock architecture, and PECL interface match its documented capabilities. Its external-crystal architecture and selectable multiplication are useful for generating local clocks from a stable reference. Confirm supply voltage, temperature grade, jitter, and output specifications in the Renesas datasheet, and implement the clock with controlled impedance and proper PECL termination.
What layout practices are required for ICS507M-01 differential outputs?
Route the differential PECL outputs as a short, symmetrical pair with a continuous ground reference and controlled impedance. Place supply-bypass components close to their pins, keep the crystal loop compact, and use the manufacturer’s recommended mode-setting and termination arrangements. Differential clock traces should avoid stubs, abrupt geometry changes, and proximity to noisy switching nodes that could degrade edge quality.
How should the crystal and mode-selection pins be configured for ICS507M-01?
The Renesas 507-01 datasheet identifies a 10 MHz crystal with S1=0 and S0=1 as the 12X configuration that generates a 120 MHz PECL output. Use that documented example as the starting point for the crystal network and selection logic. Confirm all logic levels, pull components, crystal load capacitance, and startup behavior against the manufacturer application guidance.
What are the main limitations of the ICS507M-01?
The main limitations are that the device is a clock generator rather than a general-purpose frequency converter, and its final suitability depends on the crystal, multiplier setting, supply voltage, output frequency, and operating temperature. Differential high-speed routing also demands careful PCB implementation. For applications outside the documented envelope, choose a clocking device with a more suitable frequency range, jitter target, or power specification.
Where can I buy ICS507M-01 and check its lead time?
Use the Request a Quote form on this page to request the ICS507M-01, current availability, lead time, and any required production quantities. The exact ordering code and package suffix should be confirmed before quotation because the family includes industrial, temperature, and tape-and-reel orderable variants. Purchasing staff can match the requested suffix without changing the electrical role of the device.
Is ICS507M-01 in stock and what does it cost?
Current stock, minimum order quantity, and lead time for ICS507M-01 are handled through the Request a Quote form on this page. Quote requests can identify the required package, temperature grade, and packing format before a commercial offer is prepared. This approach keeps stock and commercial terms tied to the exact orderable suffix rather than to the base family designation.

के लिए इंजीनियरिंग संदर्भ डेटा ICS507M-01 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ICS507M-01 when the design needs a 16-SOIC PECL clock synthesizer with selectable crystal multiplication and can implement a clean differential clock path. The documented S1=0, S0=1 configuration provides a useful starting point for generating 120 MHz from a 10 MHz crystal. Choose ICS507M-01I when the industrial ordering grade matches the product specification and its electrical limits have been confirmed. ICS507M-01ILF, ICS507M-01IT, and ICS507M-01ILFT can support production sourcing when their temperature and packing identifiers satisfy the assembly requirements. The 507M-01LF is the most directly documented replacement candidate because it is reported to match the original terminals, package, and primary characteristics. For every alternative, confirm supply voltage, maximum output frequency, temperature range, crystal-load values, and jitter against the Renesas datasheet before PCB release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ICS507M-01I ICS507M-01ILF ICS507M-01IT ICS507M-01ILFT 507M-01LF
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same
Function PECL clock synthesizer Clock generator, PLL, and frequency synthesizer PECL clock synthesizer PECL clock synthesizer PECL clock synthesizer PECL clock synthesizer
Pin Count 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins
Cross-Reference Result Original MPN Same-family parametric cross-reference result Same-family orderable variant Same-family orderable variant Same-family orderable variant Reported as a complete replacement

मुख्य विशेषताएँ

  • Documented crystal multiplication path (बनामICS507M-01I)
  • Directly reported replacement relationship (बनाम507M-01LF)
  • Documented differential PECL application mode (बनामICS507M-01IT)

डिज़ाइन नोट्स

Route the two PECL outputs as a short differential pair with symmetrical geometry, continuous ground reference, and the impedance required by the receiver and board stack-up. Avoid stubs and abrupt changes in width. Keep the crystal loop compact and separate it from switching-node returns so that clock edges remain clean under worst-case loading.

Place the manufacturer-recommended bypass capacitors immediately beside the supply and ground pins. Keep the clock-supply return path independent of high-current loads and avoid sharing narrow copper sections with noisy power-converter currents. Verify startup, supply tolerance, and the logic levels at S0 and S1 before applying the multiplier configuration.

Do not select the replacement from package appearance alone. The multiplier settings, crystal load arrangement, supply limits, output frequency, temperature grade, and orderable suffix must match the original design. For the documented 120 MHz example, use a 10 MHz fundamental-mode crystal with S1=0 and S0=1 rather than changing only the crystal without recalculating the required multiplier.

Use the manufacturer-recommended PECL termination and confirm that the load, trace length, and receiver input capacitance do not distort the differential edges. Measure the clock at the far receiver in the assembled board, including the effects of nearby logic, and check both differential amplitude and timing jitter. A nominal 120 MHz frequency alone does not establish signal integrity.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The verified manufacturer and distributor listings do not provide a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement for this ordering code. The product is an integrated clock and timing circuit rather than an automotive-qualified device.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ICS507M-01 datasheet ICS507M-01 datasheet pdf ICS507M-01 pinout ICS507M-01 equivalent ICS507M-01 replacement ICS507M-01 cross reference ICS507M-01 vs 507M-01LF ICS507M-01 PECL clock synthesizer ICS507M-01 16-SOIC ICS507M-01 120 MHz clock Renesas ICS507M-01 ICS507M-01 price ICS507M-01 stock ICS507M-01 crystal oscillator circuit

संबंधित कंपोनेंट्स और शब्द

Renesas Electronics ICS507M-01 ICS507M-01I ICS507M-01ILF ICS507M-01IT ICS507M-01ILFT 507M-01LF PECL clock synthesizer clock generator frequency synthesizer differential crystal oscillator clock and timing IC semiconductor fundamental-mode crystal frequency multiplication 12X multiplication 10 MHz crystal 120 MHz output differential output S1 mode selection input S0 mode selection input 16-SOIC package surface-mount package telecom line-card timing industrial control
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें