ICS507M-01 - PECL Clock Synthesizer | Renesas | 16-SOIC
MPN: ICS507M-01 ✓ فعالICS507M-01 نمای کلی
A crystal-based clock synthesizer provides a controlled relationship between a stable low-frequency reference and one or more higher-frequency outputs. This clock-generation approach is useful when a system needs a local timing reference without relying on a separate external clock generator. Differential PECL outputs are suited to high-speed digital interconnects because they can offer good noise immunity and signal-integrity characteristics when implemented with correct termination and routing.
The ICS507-01 family supports selectable frequency multiplication, allowing a single crystal frequency to serve several clocking requirements. The documented 10 MHz-to-120 MHz example demonstrates a 12X multiplication ratio. Selection inputs S1 and S0 determine the active multiplier, while the crystal and external support components establish the operating frequency and stability. Exact output frequency ranges, tolerance limits, supply voltage, operating temperature, jitter, and output rise/fall times must be taken from the manufacturer datasheet before final design release.
The 16-pin SOIC package is used in a differential clock topology that includes a crystal, supply bypass components, mode-setting inputs, and output circuitry. Layout is especially important because unequal or overly long clock traces can degrade edge quality and introduce deterministic or random jitter. Differential pair routing, solid return paths, controlled impedance, and short output connections should be treated as core layout requirements rather than optional refinements.
Typical uses include telecom line-card timing, network-interface clock generation, instrumentation, test-and-measurement equipment, industrial control, and other systems requiring a local high-frequency reference clock. In each case, the crystal frequency, selected multiplier, output standard, supply requirements, and downstream receiver timing must be checked together before the component is committed to a PCB.
The principal design consideration is to validate the complete clock path at the target frequency. Start with the manufacturer reference topology, use the documented crystal and termination values, and preserve symmetrical differential routing. Decoupling should be placed directly beside the supply pins, mode-selection logic must remain stable during operation, and unused outputs require the termination strategy specified by the manufacturer. The SOIC outline and pin numbering should also be checked against the specific ordering code and assembly variant used in the BOM.
This page organizes the confirmed ICS507M-01 clocking characteristics, practical PCB guidance, documented multiplier example, and verified drop-in candidates into an engineering-focused selection resource. It supports early architecture and sourcing decisions while directing final component validation to the Renesas manufacturer datasheet.
جایگزینهای drop-in برای ICS507M-01 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
ICS507M-01I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ICS507M-01ILF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ICS507M-01IT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ICS507M-01ILFT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
507M-01LF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ICS507M-01 مشخصات
| Product Type | PECL clock synthesizer and differential crystal oscillator |
| Manufacturer | Renesas Electronics |
| Output Logic Standard | PECL |
| پیکربندی خروجی | Differential |
| Reference Input | External fundamental-mode crystal |
| Documented Crystal Frequency | 10 MHz |
| Documented Multiplier Setting | 12X with S1=0 and S0=1 |
| Documented Output Frequency | 120 MHz |
| بستهبندی | 16-pin SOIC |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین ICS507M-01 16-pin soic
پیکربندی پین برای ICS507M-01 (پکیج 16-pin soic). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ICS507M-01.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ICS507M-01 مناسب است برای 6 کاربردs: Telecom Line-Card Clock Generation, Network Interface Timing, Industrial Control Clocking, Instrumentation and Test Equipment, High-Speed Digital Backplane, Embedded Communication Equipment.
Telecom Line-Card Clock Generation
The ICS507M-01 is appropriate for a telecom line card that needs a local differential clock derived from a stable crystal reference. Its documented 10 MHz crystal and 12X setting produce a 120 MHz PECL output, illustrating how one reference can support a higher-frequency internal clock. The circuit should follow the manufacturer reference topology, use the specified crystal network, and provide controlled-impedance differential routing. PECL output characteristics must match the receiver’s supply, termination, and input-capacitance requirements. Because clock jitter can affect downstream data recovery, validate the complete crystal-and-clock path against the system timing budget before production release.
پیشنهادی
Network Interface Timing
The ICS507M-01 can provide a differential PECL timing source for network-interface or backplane circuitry when a local crystal-based clock is preferred. The documented 12X multiplication path allows a 10 MHz reference to support a 120 MHz clock, reducing the number of unrelated external oscillators in a multi-rail design. The output network must preserve differential symmetry, provide a continuous return path, and observe the recommended PECL termination. Designers should also check output frequency tolerance, edge rate, and jitter against the receiving logic rather than relying only on nominal frequency.
پیشنهادی
Industrial Control Clocking
The ICS507M-01 fits industrial control systems that need a deterministic differential clock close to high-speed digital logic. Its selectable multiplier architecture lets one crystal reference serve a defined clock frequency, and the documented S1=0, S0=1 setting demonstrates 12X multiplication from 10 MHz to 120 MHz. Place bypass capacitance close to the supply pins and isolate the oscillator section from switching nodes and high-current outputs. For production equipment, confirm the operating-temperature grade, crystal aging characteristics, and total jitter contribution against the controller’s timing specification.
پیشنهادی
Instrumentation and Test Equipment
The ICS507M-01 can serve as the clock source in instrumentation and test equipment requiring a stable differential PECL signal. The external-crystal architecture supports controlled frequency selection, while the 12X multiplier example enables a 120 MHz output from a 10 MHz crystal. Measurement accuracy depends on the crystal’s frequency tolerance and aging as well as the circuit’s jitter, so the clock path should be characterized in the final enclosure and with the intended load. Use short outputs, correct terminations, and a clean reference supply to prevent switching or loading effects from obscuring the source performance.
پیشنهادی
High-Speed Digital Backplane
The ICS507M-01 is suitable for local clock distribution within a high-speed digital backplane when differential PECL clocking is used. A 10 MHz crystal and the documented 12X mode can produce a 120 MHz clock for nearby receivers, avoiding a long distribution path back to a central oscillator. Differential pair geometry, impedance, return-path continuity, and output termination must be controlled to preserve edge quality. Keep the oscillator’s crystal loop compact and keep its supply return independent of noisy load currents. Validate clock-to-data timing and jitter at each receiver rather than assuming nominal frequency is sufficient.
پیشنهادی
Embedded Communication Equipment
The ICS507M-01 can support embedded communication equipment that requires a local high-frequency clock and differential PECL interface. Its selectable multiplier function allows a single crystal reference to generate a higher clock frequency, with 120 MHz demonstrated from a 10 MHz crystal. In a mixed-signal or switching environment, decouple the clock supply locally and route the differential output away from power-converter nodes. Review the maximum output frequency, minimum supply voltage, temperature range, and termination requirements in the manufacturer datasheet to ensure the selected ordering variant remains valid across the product’s environmental conditions.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ICS507M-01 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ICS507M-01I | ICS507M-01ILF | ICS507M-01IT | ICS507M-01ILFT | 507M-01LF |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Function | PECL clock synthesizer | Clock generator, PLL, and frequency synthesizer | PECL clock synthesizer | PECL clock synthesizer | PECL clock synthesizer | PECL clock synthesizer |
| Pin Count | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
| Cross-Reference Result | Original MPN | Same-family parametric cross-reference result | Same-family orderable variant | Same-family orderable variant | Same-family orderable variant | Reported as a complete replacement |
تفاوتهای کلیدی
- Documented crystal multiplication path (در مقابلICS507M-01I)
- Directly reported replacement relationship (در مقابل507M-01LF)
- Documented differential PECL application mode (در مقابلICS507M-01IT)
یادداشتهای طراحی
Route the two PECL outputs as a short differential pair with symmetrical geometry, continuous ground reference, and the impedance required by the receiver and board stack-up. Avoid stubs and abrupt changes in width. Keep the crystal loop compact and separate it from switching-node returns so that clock edges remain clean under worst-case loading.
Place the manufacturer-recommended bypass capacitors immediately beside the supply and ground pins. Keep the clock-supply return path independent of high-current loads and avoid sharing narrow copper sections with noisy power-converter currents. Verify startup, supply tolerance, and the logic levels at S0 and S1 before applying the multiplier configuration.
Do not select the replacement from package appearance alone. The multiplier settings, crystal load arrangement, supply limits, output frequency, temperature grade, and orderable suffix must match the original design. For the documented 120 MHz example, use a 10 MHz fundamental-mode crystal with S1=0 and S0=1 rather than changing only the crystal without recalculating the required multiplier.
Use the manufacturer-recommended PECL termination and confirm that the load, trace length, and receiver input capacitance do not distort the differential edges. Measure the clock at the far receiver in the assembled board, including the effects of nearby logic, and check both differential amplitude and timing jitter. A nominal 120 MHz frequency alone does not establish signal integrity.
اطلاعات انطباق
The verified manufacturer and distributor listings do not provide a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement for this ordering code. The product is an integrated clock and timing circuit rather than an automotive-qualified device.