Texas Instruments

INA105AM-BB - Unity-Gain Differential Amplifier | Texas Instruments

MPN: INA105AM-BB ✓ सक्रिय
250 µV Vdss TO-99-8 metal can, 8 pins Package
न्यूनतम ऑर्डर मात्रा: 1 |

INA105AM-BB अवलोकन

The Texas Instruments INA105AM-BB is a precision unity-gain differential amplifier with a maximum input offset voltage of 250 µV, supplied in an 8-pin TO-99 metal-can package. It combines a precision operational amplifier with an integrated, laser-trimmed metal-film resistor network to implement a nominal gain of 1 without external matched resistors. The device is designed for instrumentation circuits that require accurate differential-to-single-ended conversion.

A differential amplifier is an amplifier IC that subtracts a signal applied to its inverting input from a signal applied to its non-inverting input. This function forms the foundation of instrumentation, current-shunt, bridge-sensor, and precision analog measurement circuits. The INA105 belongs to the broader operational-amplifier and signal-conditioning hierarchy, where accurate resistor ratios and common-mode rejection are essential for preserving small differential signals in the presence of much larger common-mode voltages.

The integrated resistor network eliminates the need to match and trim four external precision resistors. According to the manufacturer datasheet, the network is laser trimmed for accurate gain and high common-mode rejection. This integration simplifies the analog signal chain and reduces component-count and calibration requirements. The INA105 family is available in 8-pin plastic DIP, SOIC, and TO-99 metal packages, with INA105AM-BB identifying the metal-can configuration.

The unity-gain architecture makes the device suitable when a system requires instrumentation-amplifier-style differential conversion without adjustable gain. Its 250 µV maximum offset specification limits the output error caused by input mismatch. Because the INA105 is a dedicated precision difference amplifier rather than a general-purpose op-amp configured with external resistors, it can provide a more repeatable gain relationship in instrumentation applications.

Typical uses include bridge-transducer signal conditioning, differential receiver interfaces, shunt-amplifier signal paths, laboratory measurement systems, and industrial process-control inputs. In a bridge circuit, the two sensor outputs are applied to the differential inputs and the amplifier rejects common-mode voltage before converting the measurement to a single-ended result. This makes the INA105AM-BB suitable for sensors whose useful signal is much smaller than the voltage common to both input nodes.

Designers should preserve the polarity of the differential inputs, keep input and output return paths short, and provide adequate supply bypassing close to the device pins. Because the TO-99 package is a through-hole metal can, board-level thermal performance and socket or lead-frame compatibility should be checked against the enclosure and assembly process. Stable reference grounding is particularly important when the input difference is small relative to common-mode voltage.

This page combines the manufacturer functional description, package information, sourcing guidance, drop-in comparison, and practical implementation considerations. It highlights where the unity-gain INA105AM-BB differs from ordinary resistor-network differential amplifiers and from precision instrumentation-amplifier alternatives, helping engineers determine whether its fixed gain, integrated network, and TO-99-8 construction fit the target measurement circuit.

के लिए ड्रॉप-इन विकल्प INA105AM-BB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं INA105AM-BB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.

Texas Instruments
Package: TO-99-8 metal package, 8 pins
इसके साथ तुलना करें INA105AM-BB →

INA105AM

✅ ड्रॉप-इन
Texas Instruments
📦 TO-99-8
Precision unity-gain differential amplifier · 1 circuit · 1 V/V · 86 dB minimum over temperature · 0.01% maximum · 0.001% maximum · No external adjustments required · Precision operational amplifier with on-chip metal-film resistor network

कीमत के लिए संपर्क करें

डेटाशीट देखें →

INA105AM-BS

✅ ड्रॉप-इन
📦 TO-99-8
Same 8-wire CAN8 metal-package construction; ordering suffix may change lead or temperature attributes, which must be checked

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD549JHZ

✅ ड्रॉप-इन
📦 TO-99-8
Cross-brand precision differential amplifier; offset, bandwidth, supply, and common-mode limits may differ from the 250 µV INA105AM-BB specification

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

INA105AM-BB Maximum Ratings और Electrical Characteristics

Amplifier Type Precision unity-gain differential amplifier
Number of Circuits 1 circuit
Nominal Gain 1 V/V
Maximum Input Offset Voltage 250 µV
पैकेज TO-99-8 metal can, 8 pins
माउंटिंग प्रकार Through-hole
Integrated Resistor Network Laser-trimmed metal-film network

INA105AM-BB to-99-8 metal can, 8 pins पिन कॉन्फ़िगरेशन गाइड

INA105AM-BB (to-99-8 metal can, 8 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

INA105AM-BB के लिए to-99-8 metal can, 8 pins पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: INA105AM-BB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

INA105AM-BB के लिए उपयुक्त है 6 अनुप्रयोगs: Bridge Sensor Signal Conditioning, Precision Shunt Current Measurement, Differential Receiver Interface, Laboratory Instrumentation Front End, Industrial Process-Control Input, Medical and Diagnostic Signal Conditioning.

🏭

Bridge Sensor Signal Conditioning

The INA105AM-BB fits precision bridge-sensor front ends because its nominal gain of 1 V/V and integrated, laser-trimmed resistor network preserve the small differential voltage between two bridge nodes while rejecting their shared common-mode voltage. The device converts that differential result into a single-ended signal for a downstream converter or controller. Compared with a discrete difference amplifier, the internal matched network reduces resistor-ratio variation and calibration effort. Before finalizing the circuit, confirm the bridge excitation and common-mode voltage against the INA105 operating limits, and provide stable supply bypassing and a low-impedance reference return.

⚡

Precision Shunt Current Measurement

INA105AM-BB is appropriate for measuring the differential voltage generated across a current-sense shunt when the required gain is unity. Its 250 µV maximum input offset voltage defines the principal input-referred error term, while the integrated resistor network provides an accurate gain relationship. Place the amplifier close enough to the shunt to minimize pickup from the high-current conductor, maintain symmetry between the differential input traces, and connect the shunt return directly to the amplifier ground. The supply rails and common-mode limits must accommodate the shunt voltage under peak load.

🌐

Differential Receiver Interface

The INA105AM-BB can serve as the receiver stage for a balanced sensor, communication link, or analog front end whose signal is transmitted differentially. A unity-gain difference amplifier rejects common-mode voltage and delivers a single-ended output to the following analog stage, while the laser-trimmed on-chip network removes the need for four precisely matched external resistors. For reliable behavior, keep the two input paths similarly routed, avoid large ground-potential differences across the sensing points, and verify that signal and common-mode voltages remain within the manufacturer’s electrical limits.

🖥️

Laboratory Instrumentation Front End

INA105AM-BB is useful in laboratory and test-instrument signal chains where a differential source must be referenced to an analog ground. Its fixed unity gain preserves the source amplitude while subtracting common-mode voltage, and the integrated laser-trimmed network gives repeatable conversion without manual resistor matching. In a precision bench instrument, use low-leakage input protection, clean analog grounding, and short traces between the source and amplifier. The 8-pin TO-99 metal package also provides a robust through-hole construction for instrument panels and higher-reliability assemblies when lead spacing matches the selected board layout.

🏭

Industrial Process-Control Input

INA105AM-BB can condition a low-level differential process signal before it enters an industrial controller. The unity-gain relationship is useful when the upstream sensor already produces a calibrated voltage, and the integrated resistor network limits gain error without a discrete trimming procedure. Designers should isolate the input from high-energy field wiring, establish one solid analog reference point, and keep the TO-99 device away from heat sources that could create temperature gradients across the board. Confirm the industrial temperature range and any required qualification status directly in the manufacturer ordering documentation.

💊

Medical and Diagnostic Signal Conditioning

INA105AM-BB may be evaluated for low-level biomedical signal conditioning where a differential source must be converted to a single-ended signal with a fixed gain of 1 V/V. Its 250 µV maximum input offset voltage provides a defined input-referred error limit, while the internal trimmed network reduces gain uncertainty. A medical design must add the required patient protection, isolation, leakage-current analysis, and applicable regulatory controls; the amplifier package alone does not establish medical compliance. Keep patient-connected circuits physically separated from mains-derived power and verify the complete signal chain rather than treating the component as a certified medical device.

What is the INA105AM-BB?
The INA105AM-BB is a precision unity-gain differential amplifier in an 8-pin TO-99 metal-can package. According to the Texas Instruments INA105 datasheet, it combines a precision operational amplifier with an on-chip, laser-trimmed metal-film resistor network. Its nominal gain is 1 V/V, and its maximum input offset voltage is 250 µV. It is intended for accurate differential-to-single-ended conversion in instrumentation and low-level analog measurement systems.
What are the key specifications of INA105AM-BB that engineers should know?
The INA105AM-BB provides a nominal gain of 1 V/V, a 250 µV maximum input offset voltage, one amplifier circuit, and an integrated laser-trimmed resistor network. The manufacturer identifies the device as a precision unity-gain differential amplifier housed in a TO-99-8 metal can. According to the Texas Instruments datasheet, the integrated network is intended to deliver accurate gain and high common-mode rejection without requiring a matched set of external resistors.
What is the package of INA105AM-BB?
The INA105AM-BB is packaged as an 8-pin TO-99 metal can for through-hole mounting. The manufacturer product information identifies the INA105 family in 8-pin plastic DIP, SOIC surface-mount, and TO-99 metal packages. Because the library used for package diagrams does not include a dedicated TO-99 drawing, use the pin-description table and package outline in the manufacturer datasheet when assigning PCB holes and verifying lead dimensions.
Where can I download the INA105AM-BB datasheet PDF?
Download the INA105AM-BB datasheet from the official Texas Instruments INA105 datasheet page at https://www.ti.com/lit/ds/symlink/ina105.pdf. The document covers the INA105 precision unity-gain differential amplifier and its available package configurations. For the exact INA105AM-BB ordering code, confirm the package designation, pin functions, electrical limits, and ordering information before finalizing the PCB footprint or assembly drawing.
Where is the INA105AM-BB pinout?
The INA105AM-BB pinout is in the manufacturer INA105 datasheet, where the TO-99-8 connection diagram identifies the eight device leads and their electrical functions. Use that table when assigning input polarity, supply connections, and output routing. A package drawing should not be inferred solely from the circular can outline because lead spacing and numbering must follow the exact TO-99-8 mechanical drawing and the package-specific pin table.
How does INA105AM-BB compare with an ordinary op-amp differential circuit?
The INA105AM-BB is generally preferable when its fixed unity-gain function matches the design because its internal metal-film network is laser trimmed for accurate gain and high common-mode rejection. A discrete difference amplifier using a general-purpose op-amp requires four closely matched resistors and often external trimming to control gain error. The tradeoff is that INA105AM-BB offers a fixed gain of 1 rather than the adjustable gain normally obtained with external feedback components.
Can INA105AM replace INA105AM-BB on the same PCB?
The INA105AM is the closest same-manufacturer ordering designation associated with the INA105AM-BB, but the suffix must be checked against the manufacturer ordering table before treating it as a drop-in replacement. Both listings identify a TO-99-8 precision unity-gain differential amplifier. Verify the exact package, lead configuration, temperature grade, and device marking because a distributor’s cross-reference result alone does not establish every ordering-code difference.
Is INA105AM-BB suitable for bridge sensor measurement?
Yes, INA105AM-BB is suitable for bridge-sensor measurement when the required signal gain is 1 V/V and the input common-mode range remains within the device limits. Its integrated, laser-trimmed resistor network provides accurate differential gain and high common-mode rejection, which helps reject voltage shared by both bridge nodes. The manufacturer datasheet supplies the applicable common-mode and supply limits, which should be checked against the bridge excitation voltage and output range.
What can replace INA105AM-BB?
The INA105AM and INA105AM-BS are same-manufacturer INA105 alternatives identified in the available component references, while AD549JHZ is a cross-brand precision-amplifier alternative. A valid replacement must preserve the eight-lead metal-can footprint, input and output functions, supply arrangement, unity-gain behavior, and required offset and common-mode limits. Confirm the exact pinout and electrical limits before substitution; an amplifier with similar headline performance is not necessarily a drop-in replacement.
Is INA105AM-BB the same as AD549JHZ?
No, the INA105AM-BB and AD549JHZ are not identical devices. The INA105AM-BB is a dedicated unity-gain differential amplifier with an integrated laser-trimmed resistor network, while the AD549JHZ is identified in component comparison material as a different precision differential-amplifier product. The AD549JHZ may provide a replacement path, but compatibility must be confirmed through its manufacturer datasheet, including pin functions, supply voltage, offset, common-mode range, and package geometry.
When should I choose INA105AM-BB over a general-purpose op-amp?
Choose INA105AM-BB when the circuit needs a fixed unity-gain difference function and accurate resistor ratios are more important than adjustable gain. Its laser-trimmed internal network reduces the matching and calibration burden associated with discrete resistor networks. A general-purpose op-amp may be preferable when adjustable gain, a different common-mode range, lower cost, or a different package is required. The INA105AM-BB is a specialist precision difference amplifier rather than a universal signal-path building block.
Where to buy INA105AM-BB online?
Use the Request a Quote form on this page to request INA105AM-BB availability, pricing, and lead time for your required quantity. The exact part is offered in an 8-pin TO-99 metal-can package, so include quantity, target date, and any required packaging or traceability details in the request. The quote workflow is the appropriate route for obtaining current commercial terms without relying on a potentially stale listing price.
What is the price of INA105AM-BB?
Current commercial pricing for the INA105AM-BB is best obtained through the Request a Quote form on this page. The structured pricing data includes a last-known reference point, but that value may not reflect present inventory, order volume, or market movement. Submit the required quantity and delivery information to obtain a current quotation for the exact INA105AM-BB ordering code.
What is the lead time for INA105AM-BB?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, stock position, manufacturing status, and assembly requirements for the TO-99-8 package. Include the required delivery date and annual usage so the supplier can confirm the most appropriate supply plan for the exact INA105AM-BB part.
Is INA105AM-BB in stock?
Stock status for INA105AM-BB should be confirmed through the Request a Quote form on this page. The component is listed as an 8-pin TO-99 differential amplifier, and current availability can change independently of its technical lifecycle status. Provide your required quantity, date code preference, and target delivery date so the quotation can reflect an actionable supply commitment.
INA105AM-BB vs INA105AM - which is better for an instrumentation circuit?
Choose INA105AM-BB when it is the ordering designation required by the schematic, BOM, or approved-source specification. The INA105AM is also identified as an 8-pin TO-99 unity-gain differential amplifier and is therefore the closest same-family candidate for review. Neither should replace the other solely from a distributor cross-reference: compare the exact suffix, package, temperature grade, marking, and manufacturer ordering information before approving the substitution.

के लिए इंजीनियरिंग संदर्भ डेटा INA105AM-BB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the INA105AM-BB when the design requires a fixed unity-gain difference function, accurate internal resistor ratios, and an 8-pin TO-99 metal-can footprint. It is particularly useful in bridge, shunt, and balanced-signal interfaces where matching and trimming discrete resistors would increase assembly effort. Choose INA105AM when that ordering code is approved by the BOM or supplier after verifying its suffix and grade details. Consider INA105AM-BS when its specific lead or temperature ordering attributes satisfy the assembly requirement, but confirm those differences against the manufacturer ordering table. Evaluate AD549JHZ when a cross-brand precision alternative is needed, while checking its pin functions, supply range, common-mode limits, offset, bandwidth, and package details. Do not select an alternative merely from the eight-pin package count; the electrical limits and pin mapping must match the original circuit.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद INA105AM INA105AM-BS AD549JHZ
Brand Texas Instruments Texas Instruments Texas Instruments Analog Devices
Package TO-99-8 metal can TO-99-8 metal can CAN8 metal package TO-99-8
Amplifier Function Precision unity-gain differential amplifier Precision unity-gain differential amplifier Operational amplifier, INA105 family Precision differential amplifier
Mounting Type Through-hole Through-hole Through-hole Through-hole

मुख्य विशेषताएँ

  • Integrated precision gain network (बनामAD549JHZ)
  • Defined input offset specification (बनामINA105AM-BS)
  • Fixed-gain simplicity (बनामAD549JHZ)

डिज़ाइन नोट्स

Use the manufacturer TO-99-8 package outline to establish the PCB hole pattern; do not derive spacing from a generic circular-can drawing. Keep the two differential inputs short, appropriately terminated, and routed away from switching nodes. Because the device provides a fixed difference function, ground offsets between the input reference and output reference directly affect accuracy. Connect the signal-source return and INA105 ground through a low-impedance path rather than allowing current from an adjacent relay, motor, or switching converter to flow in the reference conductor.

Bypass the supply pins close to the TO-99 package with a local high-frequency capacitor and place a bulk capacitor near the supply source. The exact capacitor values and stability requirements must be taken from the manufacturer application guidance because the available material does not state them. Check input and output voltage limits under startup, overload, and fault conditions. The precision offset specification does not prevent overload damage, so protect the input nodes when field wiring or switching transients can exceed the signal range.

Do not interchange the differential input polarity without recalculating the output sign, and avoid using a common ground symbol as a substitute for a carefully controlled analog return path. The integrated network makes the INA105 easier to apply than a discrete difference amplifier, but input common-mode voltage, supply range, and output swing remain important constraints. Confirm the exact INA105AM-BB ordering-code limits and TO-99 lead functions in the manufacturer datasheet before releasing a production layout.

Estimated power dissipation for the amplifier cannot be assigned from the available electrical data because supply voltage, quiescent current, output voltage, and load current are not stated. Calculate it from the final operating values using P = ((VIN - VOUT) × IOUT) + (VIN × IQ), then compare the resulting junction-temperature estimate with the device’s maximum rating. In a TO-99-8 package, thermal performance depends on the board copper, socket, airflow, and nearby heat sources, so the package outline alone is not an adequate thermal model.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance status is not explicitly stated in the manufacturer or distributor material reviewed for INA105AM-BB. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification documentation before regulatory use.

डेटा सत्यापन तिथि: 2026-11-19 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

INA105AM-BB datasheet INA105AM-BB pinout INA105AM-BB datasheet pdf INA105AM-BB TO-99-8 INA105AM-BB equivalent INA105AM-BB replacement INA105AM-BB cross reference INA105AM-BB unity gain amplifier INA105AM-BB vs INA105AM INA105AM-BB vs AD549JHZ INA105AM-BB bridge sensor amplifier INA105AM-BB price INA105AM-BB stock Texas Instruments INA105AM-BB INA105AM-BB application circuit

संबंधित कंपोनेंट्स और शब्द

Texas Instruments Burr-Brown INA105AM-BB INA105AM INA105AM-BS AD549JHZ Analog Devices precision unity-gain differential amplifier difference amplifier operational amplifier signal-conditioning IC instrumentation amplifier metal-film resistor network laser trimming common-mode rejection input offset voltage TO-99-8 metal-can package through-hole mounting bridge sensor current-shunt measurement balanced differential signal industrial process control medical signal conditioning semiconductor
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें