Texas Instruments

INA240A2DR - 50V/V Bidirectional Current Sense Amplifier | Texas Instruments

MPN: INA240A2DR ✓ सक्रिय
-4 V to 80 V Vdss Bidirectional Id 8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

INA240A2DR अवलोकन

The Texas Instruments INA240A2DR is a bidirectional, zero-drift current-sense amplifier with a fixed gain of 50 V/V, a -4 V to 80 V common-mode input range, and enhanced PWM rejection. It is packaged in an 8-pin SOIC and operates from a single 5.5 V supply.

A current-sense amplifier is a specialized amplifier that measures the voltage developed across a shunt resistor placed in a current-carrying conductor. The INA240 belongs to the current-sense amplifier hierarchy within instrumentation amplifiers and analog signal-chain ICs. It converts the small differential shunt voltage into an amplified voltage proportional to current, supporting both positive and negative current measurement.

The A2 gain code sets the nominal amplification to 50 V/V. Its wide common-mode range permits sensing current above ground, at ground, and down to -4 V, which is useful in systems with inductive flyback or ground-offset returns. Bidirectional operation means that the output can represent positive or negative current without changing the basic shunt arrangement. Enhanced PWM rejection helps suppress switching disturbances commonly encountered in motor-control and power-conversion systems.

The device uses a zero-drift architecture intended to provide accurate current measurement over changing temperatures and time. The manufacturer describes the INA240 family as ultra-precise and optimized for shunt-based measurements. Because the output is proportional to the shunt differential voltage, the shunt resistance determines the conversion between current and amplifier output voltage.

Typical uses include motor and solenoid current monitoring, power-converter feedback, battery current measurement, industrial control systems, and automotive-style PWM systems. The 8-pin SOIC format supports conventional surface-mount assembly and compact analog layouts. Placement close to the shunt helps minimize pickup from adjacent switching nodes.

Designers should verify the complete pin configuration, recommended input filtering, output-voltage range, and absolute maximum ratings in the manufacturer data sheet before layout. Kelvin routing from the shunt terminals and careful grounding are especially important because small differential signals can be corrupted by shared copper impedance or high-current return paths.

This page combines the manufacturer's core INA240 characteristics with exact-MPN commercial information, same-family drop-in options, application guidance, and practical PCB considerations for engineers evaluating the INA240A2DR in a current-measurement design.

के लिए ड्रॉप-इन विकल्प INA240A2DR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

INA240A2QDRQ1

✅ ड्रॉप-इन
📦 8-pin SOIC
AEC-Q100 automotive-qualified INA240 A2 variant with the same 50 V/V gain; qualification and marking differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

INA240A2SEP

✅ ड्रॉप-इन
📦 8-pin SOIC
Same-family INA240 A2 functional option with the same 50 V/V gain; product qualification details differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TSC240

✅ ड्रॉप-इन
📦 8-pin SOIC
Pin-compatible 50 V/V cross-brand option; common-mode range is identified as wider than the INA240

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

INA240A2DR Maximum Ratings और Electrical Characteristics

Product Type Bidirectional zero-drift current-sense amplifier
Gain 50 V/V
Common-Mode Input Voltage Range -4 V to 80 V
सप्लाई वोल्टेज 5.5 V
आउटपुट प्रकार Voltage output
Directional Current Sensing Bidirectional
PWM Rejection Enhanced
Amplifier Architecture Zero-drift
Number of Amplifier Channels 1 channel
पैकेज 8-pin SOIC
Package Body Width 3.90 mm
Package Body Length 0.154 inch
माउंटिंग प्रकार Surface mount
Shipping Format Tape and reel

INA240A2DR 0.154 inch पिन कॉन्फ़िगरेशन गाइड

INA240A2DR (0.154 inch पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

INA240A2DR के लिए 0.154 inch पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: INA240A2DR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

INA240A2DR के लिए उपयुक्त है 6 अनुप्रयोगs: Motor PWM Current Monitoring, Solenoid and Flyback Sensing, DC-DC Converter Current Feedback, Battery Pack Current Measurement, Industrial Power Supply Protection, Three-Phase Inverter Shunt Sensing.

🏭

Motor PWM Current Monitoring

The INA240A2DR fits motor-control current feedback because its -4 V to 80 V common-mode range accommodates shunt positions in systems where the switching node rises well above the 5.5 V amplifier supply. Bidirectional sensing captures both motoring and regenerative current, while enhanced PWM rejection helps preserve measurement accuracy during switching transitions. Place the amplifier close to the shunt and route the differential inputs as a Kelvin pair to minimize high-current copper drops and switching-node pickup.

⚡

Solenoid and Flyback Sensing

The INA240A2DR is suitable for measuring current through an inductive load because its common-mode input range extends from -4 V to 80 V, including the negative transient region associated with typical solenoid flyback. The fixed 50 V/V gain converts the shunt differential voltage into a proportional analog signal with sufficient headroom for control and protection circuitry. Designers must still verify transient energy, input filtering, supply sequencing, and the output behavior during saturation.

⚡

DC-DC Converter Current Feedback

In a DC-DC converter, the INA240A2DR can monitor inductor or shunt current while the -4 V to 80 V common-mode range covers power rails above the 5.5 V device supply. Bidirectional measurement is useful in converters that reverse current or operate in four-quadrant control, and the zero-drift architecture targets stable low-level current measurement. Compensation and protection loops should account for amplifier delay, output saturation, shunt tolerance, and the timing relationship between the sensed current and the converter duty cycle.

🔋

Battery Pack Current Measurement

The INA240A2DR can measure charge and discharge current in a battery pack because its bidirectional operation reports both polarities and its common-mode range is independent of the 5.5 V supply. The 50 V/V gain is useful when the selected shunt produces a small differential signal. In a multi-cell pack, protection and measurement limits must be evaluated against the full battery voltage, while shunt placement should avoid current-sharing paths that would corrupt the measurement.

🏭

Industrial Power Supply Protection

The INA240A2DR supports fast power-supply current monitoring and overcurrent detection in industrial equipment by converting a shunt voltage into a proportional analog signal. Its common-mode range covers high-side sensing above the 5.5 V supply, and bidirectional operation can identify reverse-current conditions as well as normal forward load current. The protection threshold, response time, output range, and system fault behavior should be evaluated together so that saturation does not delay a required shutdown action.

🔌

Three-Phase Inverter Shunt Sensing

The INA240A2DR can be placed across a low-side or ground-referenced inverter shunt when the sensed common-mode voltage remains within its -4 V to 80 V range. Bidirectional measurement supports positive and negative phase currents, while enhanced PWM rejection improves signal quality in switching power stages. Layout quality is critical: the differential pair should connect directly to the shunt pads, the return current should avoid the input path, and filtering should be selected without introducing excessive response delay.

अनुशंसित उत्पादों का सारांश

INA240A2QDRQ1 Automotive-qualified same-gain option for qualified motor-control platforms उपयोग में: Motor PWM Current Monitoring, DC-DC Converter Current Feedback, Battery Pack Current Measurement, Industrial Power Supply Protection, Three-Phase Inverter Shunt Sensing INA240A2PWR Same A2 gain function in a compact TSSOP package उपयोग में: Motor PWM Current Monitoring, DC-DC Converter Current Feedback, Three-Phase Inverter Shunt Sensing INA240A2SEP Same-family A2 alternative for alternate qualification requirements उपयोग में: Solenoid and Flyback Sensing, Battery Pack Current Measurement INA240A1PW Texas Instruments उपयोग में: Solenoid and Flyback Sensing, Industrial Power Supply Protection
What is the INA240A2DR?
The INA240A2DR is a single-channel, bidirectional, zero-drift current-sense amplifier with a fixed gain of 50 V/V and enhanced PWM rejection. According to the Texas Instruments INA240 data sheet, it accepts common-mode input voltages from -4 V to 80 V, operates from a 5.5 V supply, and is available in an 8-pin SOIC package. It measures the differential voltage across a shunt resistor and produces a proportional analog output.
What is the operating voltage of INA240A2DR?
The INA240A2DR operates from a single 5.5 V supply, while its input common-mode range extends from -4 V to 80 V. These two voltage ranges describe different functions: the supply powers the amplifier, whereas the common-mode range describes the voltage at the shunt-input pins that can be sensed. The manufacturer INA240 data sheet identifies the device as a voltage-output, bidirectional current-sense amplifier.
What is the gain of INA240A2DR?
The INA240A2DR has a nominal gain of 50 V/V, as identified in the manufacturer listing and family documentation. A shunt voltage of 20 mV therefore produces a nominal output of 1 V before accounting for offset and accuracy limits. The A2 gain code distinguishes this device from other INA240 gain options, so gain must be checked whenever substituting an amplifier.
Can INA240A2DR measure negative current?
Yes, the INA240A2DR supports bidirectional current measurement, meaning it can report both positive and negative shunt currents. The Texas Instruments INA240 data sheet describes it as a bidirectional voltage-output amplifier, and its common-mode input range extends to -4 V. The output polarity follows the polarity of the differential shunt voltage relative to the amplifier's defined input connections.
Where can I download the INA240A2DR datasheet PDF?
The official INA240A2DR datasheet can be downloaded from Texas Instruments through the INA240 product page at https://www.ti.com/product/INA240 or directly through https://www.ti.com/lit/gpn/ina240. The manufacturer data sheet covers the complete INA240 family, including its -4 V to 80 V common-mode range, 50 V/V A2 gain option, electrical characteristics, pin configuration, and application guidance.
Where can I find the INA240A2DR pinout?
Use the pin-configuration and pin-functions tables in the Texas Instruments INA240 data sheet to find the INA240A2DR pinout. The component uses an 8-pin SOIC, and its exact pin assignments, exposed information, and recommended connection details are defined by the manufacturer. The distributor listing confirms the 8-SOIC package, but the schematic should be assigned directly from the manufacturer data sheet rather than inferred from the package outline.
INA240A2DR vs INA240A1PW - which is better for motor current sensing?
Choose the INA240A2DR when a fixed 50 V/V gain and the wider -4 V to 80 V common-mode range are important for motor current sensing; choose the INA240A1PW when its lower gain and different package are appropriate for the design. The two devices are not direct drop-in alternatives because the gain code and package differ. Compare the shunt voltage, output swing, common-mode transient limits, and PCB footprint before selecting either device.
What is the difference between INA240A2DR and INA240A2PWR?
The INA240A2DR and INA240A2PWR both represent the A2 gain option, but their orderable packages differ: INA240A2DR is the 8-pin SOIC version, while INA240A2PWR is the narrow-body TSSOP version. They are not drop-in replacements for one another because their PCB land patterns differ. Use the manufacturer ordering information to confirm the exact package, pin configuration, and supported orderable part number.
When should I choose INA240A2DR over another current-sense amplifier?
Choose the INA240A2DR when the design needs bidirectional measurement, a fixed 50 V/V gain, enhanced PWM rejection, and a wide -4 V to 80 V common-mode range. It is especially suitable when the shunt node can sit below ground during a transient and when PWM-related disturbances must be rejected. For designs requiring a different gain, package, supply range, or automotive qualification, select a device whose electrical limits and footprint are explicitly verified.
Is INA240A2DR suitable for solenoid and flyback current sensing?
The INA240A2DR is suitable for solenoid current sensing when the design accounts for the -4 V common-mode capability, enhanced PWM rejection, and all transient limits. Texas Instruments specifically identifies the negative common-mode range as useful during the flyback period of typical solenoid applications. The amplifier must remain within its absolute maximum ratings, and the shunt, routing, filtering, and supply arrangement must prevent excessive transient energy.
What can replace INA240A2DR?
The INA240A2QDRQ1 is a same-family automotive-grade option that retains the A2 gain and can be considered for a qualified redesign, while STMicroelectronics TSC240 is identified as a pin-compatible cross-brand alternative. A valid replacement must preserve the 8-pin footprint, pin functions, 50 V/V gain, supply voltage, common-mode range, and transient limits. Confirm the exact MPN, package, and automotive qualification requirements before approving a substitution.
Is INA240A2DR the same as INA240A2QDRQ1?
The INA240A2DR and INA240A2QDRQ1 are closely related INA240 A2 devices, but they are not identical orderable products because their qualification and marking differ. INA240A2QDRQ1 is the AEC-Q100 automotive-qualified variant indicated by the Q1 designation. For an automotive design, use the Q1 part and confirm its grade-specific temperature range; for a non-automotive design, INA240A2DR is the standard option.
Where can I buy INA240A2DR online?
Use the Request a Quote form on this page to request INA240A2DR availability, current commercial terms, and a shipment quotation. The form allows a buyer to request the exact 8-pin SOIC orderable part without changing the gain, qualification, or package designation. Current stock and lead time should be confirmed through the quotation workflow before production scheduling.
What is the price of INA240A2DR?
Current commercial pricing for INA240A2DR is presented through the Request a Quote form on this page. The quote should identify the exact INA240A2DR MPN, 8-pin SOIC package, tape-and-reel packaging, and requested quantity. Structured quantity tiers are maintained separately so the displayed commercial terms can reflect current sourcing conditions without embedding a potentially stale price in technical guidance.
What is the lead time for INA240A2DR?
Request the current INA240A2DR lead time through the Request a Quote form on this page, including the required quantity and packaging preference. Lead time can depend on factory availability, inspection requirements, shipment destination, and the requested delivery date. For production planning, ask the supplier to confirm the exact MPN and provide a committed schedule rather than relying on a generic catalog lead-time estimate.
Is INA240A2DR in stock?
Current INA240A2DR inventory should be confirmed through the Request a Quote form on this page. A listing's availability can change rapidly and may not correspond to the quantity, package, or shipment date required for a production build. The request should state the exact INA240A2DR MPN, tape-and-reel requirement, annual usage, target quantity, and requested delivery date so the response is commercially actionable.
What are the key specifications of INA240A2DR that engineers should know?
The key INA240A2DR specifications are 50 V/V fixed gain, a -4 V to 80 V common-mode input range, a 5.5 V supply, bidirectional current measurement, enhanced PWM rejection, zero-drift operation, and an 8-pin SOIC package. Texas Instruments describes the INA240 family as an ultra-precise, voltage-output current-sense amplifier for shunt measurements. These parameters define its suitability for motor, solenoid, converter, and industrial current-feedback applications.
What is the best STMicroelectronics equivalent for INA240A2DR?
The STMicroelectronics TSC240 is the cross-brand candidate identified as pin-compatible with the INA240 family while offering a wider common-mode range. Before treating it as an equivalent, verify the exact package dimensions, pin functions, 50 V/V gain option, supply voltage, output swing, settling behavior, and transient limits. The manufacturer data sheets for both devices should be compared against the original shunt and filtering requirements.
Does INA240A2DR need a heatsink?
The INA240A2DR generally does not require a dedicated heatsink in a conventional 5.5 V current-sense application, but its power loss must still be checked. Estimated: use P = (5.5 V - VOUT) × IOUTPUT plus internal quiescent loss, then apply the package thermal data to the highest expected ambient temperature. Actual thermal performance depends on the PCB copper area and airflow, so a heatsink should be added only if the calculated junction temperature exceeds the device limit.

के लिए इंजीनियरिंग संदर्भ डेटा INA240A2DR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the INA240A2DR when the design requires a fixed 50 V/V gain, bidirectional current measurement, enhanced PWM rejection, and a common-mode input range extending from -4 V to 80 V. Its 8-pin SOIC package is appropriate for conventional surface-mount layouts that cannot use the narrower INA240A2PWR land pattern. Choose INA240A2QDRQ1 when the same electrical function is required in an AEC-Q100-qualified automotive design. Choose INA240A2SEP when its product qualification and ordering characteristics better match the target program. Evaluate TSC240 as a cross-brand source when its wider common-mode range is beneficial, but verify the exact pin mapping, output range, supply requirements, bandwidth, and transient specifications before releasing a cross-brand substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद INA240A2QDRQ1 INA240A2SEP TSC240
Brand Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Product Type Bidirectional zero-drift current-sense amplifier Bidirectional current-sense amplifier Bidirectional current-sense amplifier Current-sense amplifier
Gain 50 V/V 50 V/V 50 V/V 50 V/V
Common-Mode Input Range -4 V to 80 V -4 V to 80 V -4 V to 80 V Wider common-mode range

मुख्य विशेषताएँ

  • Wide common-mode sensing range (बनामTSC240)
  • Bidirectional PWM-rejecting measurement (बनामTSC240)
  • Automotive-qualified same-family option (बनामINA240A2DR)

डिज़ाइन नोट्स

Route the INA240A2DR differential inputs directly from the shunt pads as a compact, matched pair. Keep the amplifier and input traces away from switching nodes, inductors, and high-current return paths. Connect the returned ground reference at the amplifier side of the shunt rather than allowing input current to flow through sensitive copper.

Do not infer the exact 8-pin pinout from the SOIC package alone. Use the manufacturer INA240 data sheet to assign power, ground, input, and output pins, including any exposed or no-connect conditions. A wrong connection can bypass the differential sensing path or expose the inputs to an unintended common-mode voltage.

Filter the differential inputs only after accounting for the amplifier's bandwidth and control-loop requirements. Excessive filtering can delay current protection, while insufficient filtering can allow PWM edges to disturb the measurement. Validate the selected network with the actual shunt impedance, trace geometry, switching frequency, and the INA240 response characteristics.

Estimated: use P = (5.5 V - VOUT) × IOUTPUT plus internal quiescent dissipation to estimate amplifier loss, then compare the resulting junction temperature with the manufacturer limit. The inputs used are supply voltage, output voltage, and maximum output current. Actual performance also depends on SOIC copper area, ambient temperature, and airflow, so include the PCB thermal path in the calculation.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The standard INA240A2DR orderable part is not identified as an AEC-Q100-qualified variant. INA240A2QDRQ1 is the automotive-qualified same-family option. Compliance status for the standard part requires confirmation in the manufacturer product documentation.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ina240a2dr datasheet INA240A2DR pinout INA240A2DR datasheet pdf Texas Instruments INA240A2DR INA240A2DR equivalent INA240A2DR replacement INA240A2DR cross reference INA240A2DR price INA240A2DR stock INA240A2DR 50V/V INA240A2DR 8-SOIC INA240A2DR vs TSC240

संबंधित कंपोनेंट्स और शब्द

Texas Instruments INA240A2DR INA240A2QDRQ1 INA240A2SEP INA240A2PWR INA240A1PW TSC240 STMicroelectronics current-sense amplifier bidirectional current measurement zero-drift amplifier common-mode voltage shunt resistor 50 V/V gain enhanced PWM rejection voltage-output amplifier SOIC-8 QFN family surface mount SMD motor control solenoid flyback DC-DC converter battery current measurement industrial current protection
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें