Texas Instruments

INA250A1PW - 36V Bidirectional Current-Sense Amplifier | TI

MPN: INA250A1PW ✓ सक्रिय
0 V to 36 V Vdss Yes Id 16-pin TSSOP (PW) Package
न्यूनतम ऑर्डर मात्रा: 1 |

INA250A1PW अवलोकन

The Texas Instruments INA250A1PW is a bidirectional, precision current-sense amplifier with an integrated shunt resistor, a 36 V common-mode range, and a gain of 20 V/V in a 16-pin TSSOP (PW) package. It is designed to measure positive and negative current while the measured conductor operates from 0 V to 36 V, independent of the amplifier supply voltage. The integrated precision shunt removes the external shunt-resistor element while preserving calibrated current measurement.

A current-sense amplifier is a specialized instrumentation amplifier that converts the voltage across a current-sensing resistor into a proportional, low-level output voltage. The INA250 belongs to the current-sense amplifier hierarchy, where it supports precision measurement, power monitoring, motor control, industrial instrumentation, and protection systems. Its integrated shunt also reduces board area compared with a discrete shunt-resistor implementation.

The device provides bidirectional measurement through an externally applied reference voltage. Positive current can move the output above the reference level, while negative current moves it below that level. This arrangement allows a unidirectional amplifier output to represent both load directions and supports applications that need absolute-value or signed-current information. The 0 V to 36 V common-mode range covers many industrial, automotive-adjacent, power-supply, and motor-system rails.

The INA250A1PW uses the A1 gain option, which provides 20 V/V voltage gain. Its voltage-output architecture simplifies connection to analog-to-digital converters, comparators, controllers, and monitoring systems. Because the sensing element is integrated, PCB design must preserve the defined current path and provide adequate copper width and thermal capacity for the intended current level. The TSSOP package is a surface-mount package in the TSSOP-16 family.

Typical applications include high-side power-supply monitoring, bidirectional motor-current measurement, industrial control systems, battery current sensing, solenoid monitoring, and electronic protection. In these systems, the amplifier reconstructs a current-proportional voltage that can be digitized or compared with a threshold. System calibration should account for the selected gain, reference voltage, ADC resolution, and the measurement bandwidth required by the load.

Design attention should focus on Kelvin routing for the reference connection, filtering around the output when the measured waveform contains high-frequency noise, and thermal verification at maximum continuous current. The integrated shunt is convenient, but PCB copper, vias, pads, and connector geometry can limit practical current and increase temperature rise. Use the manufacturer pin-description table when assigning PCB tracks and the device data sheet for the complete recommended layout.

This page combines the manufacturer device description, package and operating information, practical application guidance, replacement criteria, and engineering-oriented design notes. These resources help engineers evaluate the INA250A1PW beyond a basic distributor listing while keeping pin compatibility and measurement accuracy at the center of the selection process.

के लिए ड्रॉप-इन विकल्प INA250A1PW — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

INA250A1PW Maximum Ratings और Electrical Characteristics

Device Type Bidirectional precision current-sense amplifier
Integrated Current-Shunt Resistor Yes
Common-Mode Voltage Range 0 V to 36 V
Maximum Common-Mode Voltage 36 V
आउटपुट प्रकार Voltage output
Current Measurement Direction Bidirectional
Gain Option A1, 20 V/V
रेफ़रेंस वोल्टेज Externally applied
पैकेज 16-pin TSSOP (PW)
ऑपरेटिंग तापमान रेंज -40 °C to +125 °C
माउंटिंग प्रकार Surface mount

INA250A1PW 16-pin tssop (pw) पिन कॉन्फ़िगरेशन गाइड

INA250A1PW (16-pin tssop (pw) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

INA250A1PW के लिए 16-pin tssop (pw) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: INA250A1PW.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

INA250A1PW के लिए उपयुक्त है 6 अनुप्रयोगs: High-Side Power-Supply Monitoring, Bidirectional DC Motor Control, Industrial Load Monitoring, Battery Current Sensing, Solenoid and Actuator Feedback, Overcurrent Protection.

⚡

High-Side Power-Supply Monitoring

The INA250A1PW suits high-side power-supply monitoring because its integrated shunt measures current while the sensed rail can operate from 0 V to 36 V independently of the amplifier supply. Its 20 V/V gain converts bidirectional current into an analog voltage around an applied reference. Place the device in the positive or negative conductor, route the full load current through its defined pins, and connect the output to an ADC or threshold comparator. Copper width, via count, and thermal rise determine whether the layout supports the required continuous current.

🏭

Bidirectional DC Motor Control

The INA250A1PW provides signed motor-current feedback for closed-loop DC motor controllers. Its bidirectional operation allows an external reference to center the output so positive and negative current occupy opposite sides of that reference, while the 0 V to 36 V common-mode range covers many low-voltage motor buses. The 20 V/V gain establishes the current-to-voltage scale used by the controller. Designers should protect the control path from motor-edge transients, filter noise according to control-loop bandwidth, and verify that copper and thermal conditions remain acceptable at peak motor current.

🏭

Industrial Load Monitoring

The INA250A1PW is appropriate for industrial loads where signed current, compactness, and a wide sensed-voltage range are important. Its integrated shunt removes the footprint and tolerance-management burden of a discrete precision shunt, while the 20 V/V A1 gain provides usable scaling for moderate current ranges. A controller can monitor the analog output continuously or compare it against protection thresholds. Environmental qualification should be checked against the exact assembly requirements, and the PCB must maintain the specified current path without sharing narrow copper sections with sensitive measurement returns.

🔋

Battery Current Sensing

The INA250A1PW can monitor current in battery-powered equipment when the common-mode voltage stays within its 0 V to 36 V range. Bidirectional sensing is useful for systems that need charge and discharge current information, while the integrated shunt simplifies the analog front end. Connect the output to an ADC channel and use the external reference to establish the zero-current level. Before selection, calculate the maximum sense voltage at peak current, confirm the available amplifier supply range, and ensure the PCB current path remains within the device's intended operating conditions.

🔧

Solenoid and Actuator Feedback

The INA250A1PW can report current through a solenoid or actuator when the driven conductor is within the 0 V to 36 V common-mode range. The integrated sensing element provides a compact way to detect blocked motion, overload, or an open load without adding a discrete shunt. Its bidirectional capability can also distinguish current reversal in some actuator arrangements. Keep the analog output bandwidth consistent with the diagnostic response time, and place protection and filtering so switching edges do not dominate the measurement or upset an ADC input.

🛡️

Overcurrent Protection

The INA250A1PW supports overcurrent detection by translating conductor current into a voltage that can be compared with a hardware threshold. Because the A1 version has 20 V/V gain, protection thresholds should be calculated from the actual output swing, reference voltage, and selected current limit rather than copied from another gain option. The integrated shunt also helps preserve measurement consistency across assembly. Validate tolerance at the temperature extremes, account for response delay during a short circuit, and ensure the current-carrying PCB path does not become the weakest element in the protection system.

What are the key specifications of INA250A1PW that engineers should know?
The INA250A1PW is a 36 V bidirectional current-sense amplifier with an integrated shunt resistor, 20 V/V gain, and a 16-pin TSSOP package. According to the Texas Instruments INA250 datasheet, its measured common-mode voltage can range from 0 V to 36 V independently of the supply voltage. The device accepts an external reference for bidirectional measurement and operates from -40 °C to +125 °C. Its voltage output is suitable for connection to an ADC, comparator, or control input.
Where can I download the INA250A1PW datasheet PDF?
The official Texas Instruments INA250A1PW datasheet PDF is available from the TI document link on this page. According to Texas Instruments, the document contains the device description, electrical characteristics, pin descriptions, typical application information, and ordering information for the INA250 family. Use the INA250A1PW orderable part-details page to confirm the PW package, 16 pins, and the -40 °C to +125 °C temperature range.
Where can I find the INA250A1PW pinout?
The INA250A1PW pinout is defined in the pin-configuration section of the official Texas Instruments INA250 datasheet. The part uses a 16-pin TSSOP package, so the complete pin list must include all 16 numbered pins and any exposed-pad or no-connect assignments shown by the manufacturer. Use that pin-description table when routing the integrated shunt current path, reference input, supply pins, and output.
What is the operating voltage range of INA250A1PW?
The INA250A1PW can measure a common-mode voltage from 0 V to 36 V independently of its supply voltage. According to the Texas Instruments INA250 datasheet, this range applies to the voltage being sensed rather than directly defining the amplifier supply range. The precise permitted supply-voltage range must be taken from the electrical-characteristics table before the device is placed in a circuit.
How does the integrated shunt in INA250A1PW help current measurement?
The integrated precision shunt provides the internal current-sensing element needed for calibrated bidirectional measurement. According to the Texas Instruments INA250 datasheet, integration provides a calibrated equivalent measurement accuracy with low temperature drift and eliminates the need for a separate precision shunt resistor. The PCB current path, copper dimensions, and thermal conditions still require attention because they influence allowable continuous current.
Can INA250A1PW measure positive and negative current?
Yes, the INA250A1PW supports bidirectional current measurement by using an external reference voltage. According to the Texas Instruments INA250 datasheet, current in one direction produces an output above the reference level, while current in the opposite direction produces an output below it. This allows a single analog channel to represent signed current without adding a separate directional current-measurement circuit.
Where can I buy INA250A1PW online?
The INA250A1PW can be requested through the Request a Quote form on this page for current availability, order quantities, and delivery scheduling. The exact device is a Texas Instruments 16-pin TSSOP current-sense amplifier with an integrated shunt. Request the manufacturer part number INA250A1PW and confirm the required shipment quantity so the supplier can confirm allocation and lead time.
What is the price of INA250A1PW?
Current pricing for INA250A1PW is presented through the Request a Quote form on this page. The request should identify the exact manufacturer part number INA250A1PW, the required quantity, and the delivery location. The form allows an engineer or purchasing team to obtain a current quotation without relying on a stale catalog price or an incorrectly matched package variant.
What is the lead time for INA250A1PW?
The current lead time for INA250A1PW should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, package configuration, and factory allocation, so it should be obtained for the specific production quantity. Use INA250A1PW as the complete ordering identifier when requesting a delivery commitment.
Is INA250A1PW currently in stock?
Current INA250A1PW inventory should be checked through the Request a Quote form on this page. The form is the appropriate channel for confirming stock for the exact 16-pin TSSOP ordering code and the requested quantity. Do not substitute another INA250 gain option or a different tape-and-reel ordering suffix without confirming that the electrical performance and assembly requirements remain acceptable.
What can replace INA250A1PW?
A valid replacement for INA250A1PW must use the same 16-pin TSSOP footprint, preserve pin-to-pin connections, and match the critical 36 V common-mode range, integrated-shunt topology, bidirectional operation, and 20 V/V gain. The available cross-reference information identifies other INA250 gain options, but their gains differ materially and they are therefore not equivalent substitutes. Use the Request a Quote form for sourcing support for the exact device.
What is the best drop-in replacement for INA250A1PW?
No verified drop-in replacement with equivalent electrical performance was identified for INA250A1PW. A same-footprint INA250 part with a different gain code changes the output scale and requires system recalibration, while a part using an external shunt does not provide the same integrated sensing element. A genuine replacement must match the 20 V/V A1 gain and the manufacturer pin configuration; submit the exact required part number through the Request a Quote form.
What is the difference between INA250A1PW and INA250A4PW?
The primary functional difference is amplifier gain: INA250A1PW provides 20 V/V, while INA250A4PW provides 200 V/V, a tenfold increase. The cross-reference material identifies both devices in the same general INA250 family and the same 16-pin TSSOP package family, but a tenfold gain change also changes output scaling, usable measurement range, and ADC requirements. It should not be treated as an equivalent drop-in without recalculating the signal chain.
When should I choose INA250A1PW over a higher-gain INA250 option?
Choose INA250A1PW when the system needs 20 V/V gain, bidirectional measurement from a 0 V to 36 V common-mode range, and a compact integrated-shunt implementation. Higher-gain INA250 options reduce the output voltage produced by a given current, which can be useful for small measurement ranges but increases sensitivity to offset, noise, and ADC full-scale limits. The correct choice depends on the maximum current, shunt dissipation, signal resolution, and output swing.
Is INA250A1PW suitable for motor and industrial power monitoring?
The INA250A1PW is suitable for motor and industrial power monitoring when the sensed common-mode voltage remains within 0 V to 36 V and the application can accept the 20 V/V output scaling. According to the Texas Instruments INA250 datasheet, the integrated shunt supports high-accuracy bidirectional measurement while remaining independent of the supply voltage within the specified common-mode range. Thermal design and bandwidth must still be checked against motor transients and switching conditions.
Is INA250A1PW compatible with ADC-based current monitoring?
Yes, the INA250A1PW voltage output can feed an ADC input for current monitoring. The Texas Instruments INA250 datasheet identifies the device as a voltage-output current-sense amplifier with an external reference for bidirectional measurement. Select the ADC input range and reference network to accommodate the 20 V/V gain, the applied reference voltage, and the maximum expected load current; add filtering if the measured current contains high-frequency transients.

के लिए इंजीनियरिंग संदर्भ डेटा INA250A1PW — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose INA250A1PW when the design requires a bidirectional current measurement, an integrated precision shunt, a 0 V to 36 V sensed common-mode range, and 20 V/V gain. Its TSSOP-16 package is suitable for compact analog measurement sections where adding a separate precision shunt would be inconvenient. The A1 gain is most useful when the maximum expected current produces an analog output that fits comfortably within the ADC or comparator range.

Do not treat another INA250 gain option as an automatic drop-in substitute. INA250A2PW, INA250A3PW, and INA250A4PW increase the gain to 50, 100, and 200 V/V, respectively, requiring changes to output-range calculations, thresholds, software scaling, and possibly protection behavior. INA240-family devices support current measurement but use an external shunt, so they are not pin-compatible functional substitutes for the integrated INA250 architecture. Before placing a part, confirm the exact gain code, supply range, common-mode voltage, package, pin configuration, thermal conditions, and current-path layout.

मुख्य विशेषताएँ

  • Integrated precision shunt simplifies the sensing element (बनामINA240A1PW)
  • Wide common-mode operating range (बनामINA250A2PW)
  • Lower gain preserves measurement headroom for moderate currents (बनामINA250A4PW)

डिज़ाइन नोट्स

Use the manufacturer pin-description table to identify the current-carrying pins and preserve the specified copper path around the integrated shunt. Estimate: for a 1 A continuous current, the PCB copper, vias, pads, and package connections all contribute resistance and temperature rise, so the layout should be sized for the intended current rather than only the nominal signal connection. Keep the current path physically separate from sensitive analog routing to reduce unintended voltage offsets.

Route the reference and output connections as short analog traces, with their return path referenced to the device ground. The external reference defines the zero-current output level in bidirectional measurements, so excessive reference impedance can create offset or noise that appears directly on the measured-current signal. If the output connects to an ADC, select the input range for the 20 V/V gain and add filtering only after determining the required control or diagnostic bandwidth.

Verify continuous-current capability at the highest ambient temperature rather than relying only on nominal output range. Estimate: resistor power is calculated as P = I²R, and junction temperature depends on the package dissipation and PCB thermal resistance. The integrated shunt eliminates a discrete resistor but does not eliminate heat generated in the current path. Check connector pads, copper width, via count, and exposed thermal features against the maximum operating current and temperature rise.

Do not substitute another INA250 gain option as an electrically equivalent replacement. The A1 gain is 20 V/V, while the A2, A3, and A4 options provide progressively higher gain; changing gain changes output scaling, signal-to-noise requirements, and threshold calculations. Also verify that the common-mode voltage remains between 0 V and 36 V and that the separate amplifier supply stays within the manufacturer-specified operating range.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The identified technical pages do not provide explicit compliance statements for the exact ordering code, so each unconfirmed field is marked unknown. AEC-Q100 is not applicable because the device is an instrumentation amplifier rather than an automotive-qualified component.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

INA250A1PW datasheet INA250A1PW pinout INA250A1PW datasheet pdf INA250A1PW application circuit INA250A1PW equivalent INA250A1PW replacement INA250A1PW vs INA250A4PW INA250A1PW footprint INA250A1PW price INA250A1PW stock Texas Instruments INA250A1PW INA250A1PW 36V current sense amplifier

संबंधित कंपोनेंट्स और शब्द

Texas Instruments INA250A1PW INA250 INA240A1PW INA240A3DR INA250A2PW INA250A3PW INA250A4PW current-sense amplifier bidirectional current measurement integrated shunt resistor common-mode voltage voltage-output amplifier precision instrumentation amplifier power management TSSOP-16 TSSOP family surface-mount package SMD analog-to-digital converter external reference voltage current monitoring motor control overcurrent protection industrial instrumentation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें