INA327EA/250 - Precision Rail-to-Rail INA | Texas Instruments
MPN: INA327EA/250 ✓ सक्रियINA327EA/250 अवलोकन
An instrumentation amplifier is a specialized amplifier that combines differential input sensing, high input impedance, precise gain setting, and common-mode rejection in one package. This functional category belongs to the amplifier IC hierarchy, where precision instrumentation amplifiers outperform general-purpose operational amplifiers in applications that must measure small differential signals while rejecting large common-mode voltages.
The INA327 provides a 1 kHz gain-bandwidth product, rail-to-rail input and output operation, an input bias current of 200 pA, and a common-mode input range that extends beyond the positive and negative supply rails. Its true single-supply architecture supports operation from a single 2.7 V to 5.5 V supply, while low DC errors and low drift suit precision measurement equipment.
The INA327EA/250 uses an external resistor network to establish gain, allowing the amplifier to be adapted to different sensor scales without changing the integrated circuit. Its CMOS input stage supports low input bias current and broad common-mode range, although the relatively narrow 1 kHz bandwidth makes it more appropriate for current, temperature, pressure, and slowly varying sensor signals than for wideband signal chains.
Typical applications include shunt-based current measurement in power-conversion systems, low-side motor and solenoid monitoring, bridge-sensor signal conditioning, battery current sensing, and precision industrial instrumentation. The shutdown function can reduce supply demand when the measurement channel is not active, while the 10-pin VSSOP package supports compact surface-mount layouts.
The principal design consideration is input filtering. Gain-setting resistors and the instrument-amplifier inputs should be positioned close to the device, with differential and common-mode filtering selected carefully to preserve differential accuracy and common-mode rejection. The power rails must remain within the 2.7 V to 5.5 V operating limits, and unused inputs should be connected according to the manufacturer pin-description table.
This page combines manufacturer ordering information, package and operating details, drop-in alternatives, application guidance, PCB considerations, and a parameter-by-parameter comparison to support faster component selection and implementation.
के लिए ड्रॉप-इन विकल्प INA327EA/250 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
INA327EA/250G4
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
INA326EA/250G4
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
INA327EA/250 Maximum Ratings और Electrical Characteristics
| Product Type | Precision low-drift CMOS instrumentation amplifier |
| Number of Amplifiers | 1 amplifier |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Gain-Bandwidth Product | 1 kHz |
| Input Offset Voltage | 100 uV maximum |
| Input Bias Current | 200 pA |
| Input Type | Rail-to-rail differential input |
| आउटपुट प्रकार | Rail-to-rail |
| Common-Mode Input Range | Extends beyond the positive and negative supply rails |
| Shutdown Function | Supported |
| Supply Type | Single supply |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C |
| पैकेज | 10-pin VSSOP (DGS), 3.00 mm width |
| माउंटिंग प्रकार | Surface mount |
| Manufacturing Technology | CMOS |
| Delivery Format | Reel, tape and reel |
INA327EA/250 पिन कॉन्फ़िगरेशन
| पिन 1 | [DATA_NEEDED: pin 1 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 2 | [DATA_NEEDED: pin 2 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 3 | [DATA_NEEDED: pin 3 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 4 | [DATA_NEEDED: pin 4 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 5 | [DATA_NEEDED: pin 5 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 6 | [DATA_NEEDED: pin 6 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 7 | [DATA_NEEDED: pin 7 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 8 | [DATA_NEEDED: pin 8 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 9 | [DATA_NEEDED: pin 9 name] — Refer to the pin-description table in the manufacturer datasheet. |
| पिन 10 | [DATA_NEEDED: pin 10 name] — Refer to the pin-description table in the manufacturer datasheet. |
सामान्य अनुप्रयोग
INA327EA/250 के लिए उपयुक्त है 6 अनुप्रयोगs: Low-Side Shunt Current Sensing, Industrial Pressure and Load Sensing, Battery and Power-System Monitoring, Motor and Solenoid Current Feedback, Precision Sensor Signal Conditioning, Portable Instrument and Sensor Interface.
Low-Side Shunt Current Sensing
The INA327EA/250 fits low-side shunt sensing because it combines a 1 kHz gain-bandwidth product with a common-mode input range extending beyond the positive and negative supply rails. A series shunt converts current into a small differential voltage, while the instrumentation amplifier rejects the larger supply-side common-mode voltage. Its 200 pA input bias current is useful when the shunt and gain network present high source impedance. Select the shunt value and external gain resistor together so that the largest expected current leaves adequate output headroom at the 2.7 V to 5.5 V supply limit.
अनुशंसित
Industrial Pressure and Load Sensing
The INA327EA/250 can amplify the small differential output of resistive pressure, force, or load-cell bridges while operating from a single 2.7 V to 5.5 V supply. The 1 kHz gain-bandwidth product is suitable for slow mechanical signals that do not require wideband capture, and the rail-to-rail output helps preserve usable signal range near the supply limits. Bridge excitation and instrumentation-amplifier supply should use clean, appropriately decoupled rails, while matched gain resistors and balanced input routing help preserve offset and common-mode performance.
अनुशंसित
Battery and Power-System Monitoring
The INA327EA/250 is applicable to battery management systems that measure charge, discharge, or average current through a low-side shunt. Its common-mode input range extending beyond the rails reduces sensitivity to changes in the shunt position relative to ground, while the precision CMOS input stage provides low 200 pA bias current for high-impedance networks. The 1 kHz bandwidth is appropriate for control telemetry and protection thresholds rather than high-frequency ripple analysis. Use shutdown control and power-supply design to prevent backfeeding or unintended output behavior during inactive periods.
अनुशंसित
Motor and Solenoid Current Feedback
The INA327EA/250 can provide current feedback for DC motors, solenoids, and electromechanical actuators when the switching event frequency is outside the measurement bandwidth. Its 1 kHz gain-bandwidth product supports slow average-current feedback, and the extended common-mode range allows sensing a shunt placed near the supply return. The circuit must avoid saturating the amplifier during startup or fault-current events. Validate the complete gain, headroom, filter, and shutdown sequence across the actuator's operating range before using the output in a control loop.
अनुशंसित
Precision Sensor Signal Conditioning
The INA327EA/250 is useful as the analog front end for low-level temperature, position, strain, and resistive sensor bridges. Its low drift, rail-to-rail input and output, and common-mode operation beyond the supply rails permit a single-supply design with limited headroom. The 1 kHz bandwidth is appropriate for thermal and mechanical sensors with bandwidths well below 1 kHz. External gain resistors determine the signal scale, so use precise resistors, symmetric routing, and filtering that does not unnecessarily reduce common-mode rejection. A low-noise ADC can then digitize the conditioned output.
अनुशंसित
Portable Instrument and Sensor Interface
The INA327EA/250 suits compact, battery-operated instruments that require accurate differential measurement from a low-voltage supply. It operates from 2.7 V to 5.5 V, offers shutdown support for duty-cycled operation, and uses a compact 10-pin VSSOP package. The rail-to-rail output and extended input common-mode range improve signal utilization in systems with limited supply voltage. Because the device includes one amplifier, multi-channel systems require multiple devices or an additional multiplexing strategy. Confirm startup sequencing, input protection, and channel isolation to prevent unused sensor inputs from disturbing the measurement.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा INA327EA/250 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | INA327EA/250G4 | INA326EA/250G4 |
|---|---|---|---|
| Package | 10-VSSOP (DGS) | 10-VSSOP (DGS) | 10-VSSOP (DGS) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Precision low-drift CMOS instrumentation amplifier | Precision CMOS instrumentation amplifier | Instrumentation amplifier |
| Number of Amplifiers | 1 amplifier | 1 amplifier | 1 amplifier |
मुख्य विशेषताएँ
- Documented shutdown support within the INA327 family (बनामINA326EA/250G4)
- Extended common-mode operation (बनामINA326EA/250G4)
- Single 10-VSSOP precision analog front end (बनामINA327EA/250G4)
डिज़ाइन नोट्स
Place the INA327EA/250 close to the shunt or bridge output, and route the two differential input paths as short and symmetrically as practical. Keep the gain-setting resistors near their associated device pins and connect the DGS exposed thermal pad according to the manufacturer package drawing. A quiet ground return and decoupled supply connection reduce errors that could otherwise appear as input offset or output-noise problems.
Use the 1 kHz gain-bandwidth product to determine whether the measurement is fast enough, and account for the bandwidth reduction that occurs as closed-loop gain increases. For low-side shunt sensing, select the shunt and external gain network so the maximum expected current does not force the rail-to-rail output into saturation. Confirm settling behavior if the shutdown pin is used to cycle the measurement channel.
Do not assume that similar MSOP package dimensions guarantee a drop-in replacement. Verify the complete 10-pin DGS footprint, exposed-pad connection, gain-resistor arrangement, shutdown logic, supply range, and common-mode limits against the manufacturer datasheet. Also check that unused inputs remain in a valid state during startup and shutdown so external sensor circuitry cannot create unintended output voltage or overload the input stage.
अनुपालन जानकारी
The INA327EA/250G4 suffix is associated with a green-compatible ordering form in the Texas Instruments ordering system, but explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statements are not included for the target MPN.