Texas Instruments

INA327EA/250 - Precision Rail-to-Rail INA | Texas Instruments

Référence : INA327EA/250 ✓ Actif
2.7 V to 5.5 V Vdss 200 pA Id 10-pin VSSOP (DGS), 3.00 mm width Package
MOQ : 1 |

INA327EA/250 Présentation

Texas Instruments INA327EA/250 is a precision, low-drift CMOS instrumentation amplifier with rail-to-rail input and output, shutdown support, a 1 kHz gain-bandwidth product, and a 10-pin VSSOP (DGS) package. It operates from 2.7 V to 5.5 V and is designed for low-side current sensing, sensor conditioning, and measurement systems requiring accurate differential amplification with minimal drift.

An instrumentation amplifier is a specialized amplifier that combines differential input sensing, high input impedance, precise gain setting, and common-mode rejection in one package. This functional category belongs to the amplifier IC hierarchy, where precision instrumentation amplifiers outperform general-purpose operational amplifiers in applications that must measure small differential signals while rejecting large common-mode voltages.

The INA327 provides a 1 kHz gain-bandwidth product, rail-to-rail input and output operation, an input bias current of 200 pA, and a common-mode input range that extends beyond the positive and negative supply rails. Its true single-supply architecture supports operation from a single 2.7 V to 5.5 V supply, while low DC errors and low drift suit precision measurement equipment.

The INA327EA/250 uses an external resistor network to establish gain, allowing the amplifier to be adapted to different sensor scales without changing the integrated circuit. Its CMOS input stage supports low input bias current and broad common-mode range, although the relatively narrow 1 kHz bandwidth makes it more appropriate for current, temperature, pressure, and slowly varying sensor signals than for wideband signal chains.

Typical applications include shunt-based current measurement in power-conversion systems, low-side motor and solenoid monitoring, bridge-sensor signal conditioning, battery current sensing, and precision industrial instrumentation. The shutdown function can reduce supply demand when the measurement channel is not active, while the 10-pin VSSOP package supports compact surface-mount layouts.

The principal design consideration is input filtering. Gain-setting resistors and the instrument-amplifier inputs should be positioned close to the device, with differential and common-mode filtering selected carefully to preserve differential accuracy and common-mode rejection. The power rails must remain within the 2.7 V to 5.5 V operating limits, and unused inputs should be connected according to the manufacturer pin-description table.

This page combines manufacturer ordering information, package and operating details, drop-in alternatives, application guidance, PCB considerations, and a parameter-by-parameter comparison to support faster component selection and implementation.

Alternatives de remplacement direct pour INA327EA/250 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

INA327EA/250G4

✅ Remplacement direct
📦 10-VSSOP (DGS)
Same INA327 family and 10-VSSOP footprint; ordering-code and reel characteristics may differ by up to the ordering conventions without changing the core electrical function

📋 Alternative de référence (hors catalogue)

INA326EA/250G4

✅ Remplacement direct
📦 10-VSSOP (DGS)
Same manufacturer, gain class, 10-VSSOP format and single-amplifier instrumentation-amplifier architecture; detailed gain, bandwidth, shutdown, and pin-level differences require confirmation

📋 Alternative de référence (hors catalogue)

INA327EA/250 Valeurs maximales et caractéristiques électriques

Product Type Precision low-drift CMOS instrumentation amplifier
Number of Amplifiers 1 amplifier
Supply Voltage Range 2.7 V to 5.5 V
Gain-Bandwidth Product 1 kHz
Input Offset Voltage 100 uV maximum
Input Bias Current 200 pA
Input Type Rail-to-rail differential input
Type de sortie Rail-to-rail
Common-Mode Input Range Extends beyond the positive and negative supply rails
Shutdown Function Supported
Supply Type Single supply
Plage de température de fonctionnement -40 °C to +85 °C
Boîtier 10-pin VSSOP (DGS), 3.00 mm width
Type de montage Surface mount
Manufacturing Technology CMOS
Delivery Format Reel, tape and reel

Configuration des broches de INA327EA/250

MSOP-10 (3x3mm) Package Pinout Diagram MSOP-10 3x3mm, P0.5mm, JEDEC MO-187. 10-pin micro small outline. 1 10 2 9 3 8 4 7 5 6 MSOP-10 (3x3mm)
Broche 1 [DATA_NEEDED: pin 1 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 2 [DATA_NEEDED: pin 2 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 3 [DATA_NEEDED: pin 3 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 4 [DATA_NEEDED: pin 4 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 5 [DATA_NEEDED: pin 5 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 6 [DATA_NEEDED: pin 6 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 7 [DATA_NEEDED: pin 7 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 8 [DATA_NEEDED: pin 8 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 9 [DATA_NEEDED: pin 9 name] — Refer to the pin-description table in the manufacturer datasheet.
Broche 10 [DATA_NEEDED: pin 10 name] — Refer to the pin-description table in the manufacturer datasheet.

Applications typiques

INA327EA/250 convient pour 6 applications: Low-Side Shunt Current Sensing, Industrial Pressure and Load Sensing, Battery and Power-System Monitoring, Motor and Solenoid Current Feedback, Precision Sensor Signal Conditioning, Portable Instrument and Sensor Interface.

⚡

Low-Side Shunt Current Sensing

The INA327EA/250 fits low-side shunt sensing because it combines a 1 kHz gain-bandwidth product with a common-mode input range extending beyond the positive and negative supply rails. A series shunt converts current into a small differential voltage, while the instrumentation amplifier rejects the larger supply-side common-mode voltage. Its 200 pA input bias current is useful when the shunt and gain network present high source impedance. Select the shunt value and external gain resistor together so that the largest expected current leaves adequate output headroom at the 2.7 V to 5.5 V supply limit.

🏭

Industrial Pressure and Load Sensing

The INA327EA/250 can amplify the small differential output of resistive pressure, force, or load-cell bridges while operating from a single 2.7 V to 5.5 V supply. The 1 kHz gain-bandwidth product is suitable for slow mechanical signals that do not require wideband capture, and the rail-to-rail output helps preserve usable signal range near the supply limits. Bridge excitation and instrumentation-amplifier supply should use clean, appropriately decoupled rails, while matched gain resistors and balanced input routing help preserve offset and common-mode performance.

🔋

Battery and Power-System Monitoring

The INA327EA/250 is applicable to battery management systems that measure charge, discharge, or average current through a low-side shunt. Its common-mode input range extending beyond the rails reduces sensitivity to changes in the shunt position relative to ground, while the precision CMOS input stage provides low 200 pA bias current for high-impedance networks. The 1 kHz bandwidth is appropriate for control telemetry and protection thresholds rather than high-frequency ripple analysis. Use shutdown control and power-supply design to prevent backfeeding or unintended output behavior during inactive periods.

🤖

Motor and Solenoid Current Feedback

The INA327EA/250 can provide current feedback for DC motors, solenoids, and electromechanical actuators when the switching event frequency is outside the measurement bandwidth. Its 1 kHz gain-bandwidth product supports slow average-current feedback, and the extended common-mode range allows sensing a shunt placed near the supply return. The circuit must avoid saturating the amplifier during startup or fault-current events. Validate the complete gain, headroom, filter, and shutdown sequence across the actuator's operating range before using the output in a control loop.

🧩

Precision Sensor Signal Conditioning

The INA327EA/250 is useful as the analog front end for low-level temperature, position, strain, and resistive sensor bridges. Its low drift, rail-to-rail input and output, and common-mode operation beyond the supply rails permit a single-supply design with limited headroom. The 1 kHz bandwidth is appropriate for thermal and mechanical sensors with bandwidths well below 1 kHz. External gain resistors determine the signal scale, so use precise resistors, symmetric routing, and filtering that does not unnecessarily reduce common-mode rejection. A low-noise ADC can then digitize the conditioned output.

📱

Portable Instrument and Sensor Interface

The INA327EA/250 suits compact, battery-operated instruments that require accurate differential measurement from a low-voltage supply. It operates from 2.7 V to 5.5 V, offers shutdown support for duty-cycled operation, and uses a compact 10-pin VSSOP package. The rail-to-rail output and extended input common-mode range improve signal utilization in systems with limited supply voltage. Because the device includes one amplifier, multi-channel systems require multiple devices or an additional multiplexing strategy. Confirm startup sequencing, input protection, and channel isolation to prevent unused sensor inputs from disturbing the measurement.

What are the key specifications of INA327EA/250 that engineers should know?
The INA327EA/250 is a single-amplifier precision CMOS instrumentation amplifier with a 2.7 V to 5.5 V supply range, 1 kHz gain-bandwidth product, rail-to-rail inputs and outputs, and a 10-pin VSSOP package. According to the Texas Instruments INA327 datasheet, it also provides low drift, a 200 pA input bias current, rail-extending common-mode input capability, and shutdown support. These characteristics make it suitable for low-side shunt measurement and precision sensor conditioning.
Where can I download the INA327EA/250 datasheet PDF?
The official INA327EA/250 documentation is available from the Texas Instruments product page at https://www.ti.com/product/INA327, with the exact ordering information listed at https://www.ti.com/product/INA327/part-details/INA327EA/250. The manufacturer datasheet contains the complete electrical characteristics, pin descriptions, typical application circuit, gain equations, and recommended operating conditions for the 10-pin DGS package.
Where can I find the INA327EA/250 pinout?
The INA327EA/250 pinout is shown in the pin-configuration section of the Texas Instruments INA327 datasheet. The device uses a 10-pin VSSOP (DGS) package with an exposed thermal pad that forms part of the package footprint. Use the pin-description table when assigning differential inputs, gain-setting resistors, supply rails, shutdown control, reference input, output, and ground connections.
What is the operating voltage range of INA327EA/250?
The INA327EA/250 operates from 2.7 V to 5.5 V. According to the Texas Instruments INA327 datasheet, the part supports a true single-supply configuration while maintaining rail-to-rail input and output behavior. Its input common-mode range extends beyond the positive and negative supply rails, which is particularly useful when sensing bipolar or ground-referenced signals from a single low-voltage supply.
Is INA327EA/250 suitable for low-side current sensing?
Yes, the INA327EA/250 is well suited to low-side current sensing because it combines a 1 kHz gain-bandwidth product, low 200 pA input bias current, and a common-mode range extending beyond the supply rails. It can amplify the small voltage generated by a series shunt while rejecting the larger supply-side common-mode voltage. The shunt value and external gain resistor must be selected together to maintain headroom.
What is the gain-bandwidth product of INA327EA/250?
The INA327EA/250 has a gain-bandwidth product of 1 kHz. According to the Texas Instruments INA327 datasheet, this bandwidth is appropriate for precision current, temperature, pressure, and other low-frequency sensor measurements rather than high-speed waveform capture. For higher closed-loop gain, the available bandwidth decreases, so stability and settling should be evaluated together with the selected external gain resistor.
What can replace INA327EA/250?
The closest documented same-family replacement is INA326EA/250G4, which appears in a direct comparison with the INA327EA/250, while INA327EA/250G4 is a manufacturer-ordering variant in the same 10-VSSOP family. A valid drop-in replacement must match the 10-pin DGS footprint, supply range, gain-setting method, shutdown behavior, and common-mode performance. Use the Request a Quote form to discuss exact MPN availability and sourcing.
Is INA327EA/250 the same as INA327EA/250G4?
The INA327EA/250G4 is a Texas Instruments ordering variant associated with the same INA327 product family and 10-VSSOP (DGS) package. The suffix can distinguish reel or order-code characteristics, but the manufacturer ordering page should be used to confirm the exact shipping quantity and form. Do not substitute packaging codes unless the manufacturer confirms that the electrical configuration and lead-free processing remain unchanged.
INA327EA/250 vs INA326EA/250G4 — which is better for current sensing?
The INA327EA/250 is the better documented choice when low drift, rail-to-rail operation, shutdown, and a common-mode range extending beyond the rails are required. The INA326EA/250G4 appears in a direct comparison and should be considered when its electrical table confirms equivalent gain, bandwidth, supply, and pin behavior. Final selection must include a complete manufacturer pin and parameter comparison rather than package similarity alone.
When should I choose INA327EA/250 over INA327EA/2K5?
Choose INA327EA/250 when its specific ordering form matches the required assembly process and volume. The INA327EA/2K5 is another INA327 order code associated with the same family, but its suffix may represent a different reel or order configuration. Compare the Texas Instruments ordering table for exact package, temperature range, tape quantity, and lead-free status before treating either MPN as a substitute for the other.
Is INA327EA/250 suitable for bridge-sensor measurement?
The INA327EA/250 can condition bridge-sensor signals when the measurement bandwidth is low enough for its 1 kHz gain-bandwidth product. Its precision CMOS architecture, low input bias current, and common-mode range extending beyond the supply rails help preserve small differential bridge outputs. The external gain resistors should be matched carefully, and input filtering should be designed to avoid degrading differential accuracy or common-mode rejection.
How should I design the PCB layout for INA327EA/250?
Place the INA327EA/250 close to the shunt or sensor so that sensitive differential traces remain short and symmetric. Keep the gain-setting resistors adjacent to the appropriate pins, connect the thermal pad as specified by the manufacturer, and maintain a quiet return path. According to the Texas Instruments layout guidance, filtering components should be placed near the inputs while maintaining the specified gain-resistor network.
What is the best Analog Devices or Microchip equivalent for INA327EA/250?
No verified cross-brand drop-in equivalent can be identified from the available manufacturer and comparison records. A valid substitute would need the same 10-pin MSOP or VSSOP footprint, pin-to-pin gain-resistor arrangement, 2.7 V to 5.5 V supply range, shutdown behavior, and compatible common-mode range. Use the Request a Quote form to request a cross-brand review using the required footprint and electrical limits.
Where to buy INA327EA/250 online?
The INA327EA/250 can be requested through the Request a Quote form on this page, where the exact Texas Instruments order code can be checked against quantity, shipment form, and delivery requirements. Because availability and commercial terms can change, use the form rather than relying on an unverified listing. The manufacturer identifies the device as INA327EA/250 in a 10-pin VSSOP (DGS) package.
What is the price and lead time of INA327EA/250?
Use the Request a Quote form on this page for the current INA327EA/250 price, stock position, minimum order quantity, and lead time. Texas Instruments identifies the part as a 10-pin VSSOP (DGS) device rated from -40 °C to 85 °C. Commercial terms depend on order quantity, reel configuration, delivery schedule, and market conditions, so they should be confirmed for the specific purchase.
How does INA327EA/250 shutdown operation affect circuit design?
The shutdown function can reduce power use when the measurement channel is inactive, making it useful in duty-cycled sensing systems. According to the Texas Instruments INA327 datasheet, the shutdown pin and associated electrical limits must be followed exactly, including valid logic levels and supply conditions. Control sequencing should also prevent sensor or external circuitry from forcing the output or input pins beyond their permitted ranges while the amplifier is disabled.

Données de référence d'ingénierie pour INA327EA/250 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the INA327EA/250 when the design requires a precision, low-drift CMOS instrumentation amplifier with rail-to-rail input and output, shutdown, a 2.7 V to 5.5 V supply, and a 1 kHz gain-bandwidth product. It is particularly suitable for low-side shunt, bridge-sensor, battery-current, and slowly varying industrial sensor measurements. Select INA327EA/250G4 when that manufacturer ordering code matches the required reel and processing configuration. Consider INA326EA/250G4 only after confirming its complete gain, bandwidth, shutdown, common-mode, and pin-level specifications against the application. No cross-brand substitute should be selected solely because it uses a 10-pin MSOP package; the footprint, gain-setting method, shutdown logic, exposed pad, and electrical limits must all match.

Comparaison avec les alternatives

Paramètre Ce produit INA327EA/250G4 INA326EA/250G4
Package 10-VSSOP (DGS) 10-VSSOP (DGS) 10-VSSOP (DGS)
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type Precision low-drift CMOS instrumentation amplifier Precision CMOS instrumentation amplifier Instrumentation amplifier
Number of Amplifiers 1 amplifier 1 amplifier 1 amplifier

Principaux différenciateurs

  • Documented shutdown support within the INA327 family (vs INA326EA/250G4)
  • Extended common-mode operation (vs INA326EA/250G4)
  • Single 10-VSSOP precision analog front end (vs INA327EA/250G4)

Notes de conception

Place the INA327EA/250 close to the shunt or bridge output, and route the two differential input paths as short and symmetrically as practical. Keep the gain-setting resistors near their associated device pins and connect the DGS exposed thermal pad according to the manufacturer package drawing. A quiet ground return and decoupled supply connection reduce errors that could otherwise appear as input offset or output-noise problems.

Use the 1 kHz gain-bandwidth product to determine whether the measurement is fast enough, and account for the bandwidth reduction that occurs as closed-loop gain increases. For low-side shunt sensing, select the shunt and external gain network so the maximum expected current does not force the rail-to-rail output into saturation. Confirm settling behavior if the shutdown pin is used to cycle the measurement channel.

Do not assume that similar MSOP package dimensions guarantee a drop-in replacement. Verify the complete 10-pin DGS footprint, exposed-pad connection, gain-resistor arrangement, shutdown logic, supply range, and common-mode limits against the manufacturer datasheet. Also check that unused inputs remain in a valid state during startup and shutdown so external sensor circuitry cannot create unintended output voltage or overload the input stage.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The INA327EA/250G4 suffix is associated with a green-compatible ordering form in the Texas Instruments ordering system, but explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statements are not included for the target MPN.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

INA327EA/250 datasheet INA327EA/250 pinout INA327EA/250 datasheet pdf INA327EA/250 specifications INA327EA/250 VSSOP footprint INA327EA/250 drop-in replacement INA327EA/250 vs INA326EA/250G4 INA327EA/250 low-side current sensing INA327EA/250 rail-to-rail input output INA327EA/250 1kHz gain bandwidth INA327EA/250 price INA327EA/250 stock

Composants & termes associés

Texas Instruments INA327EA/250 INA327EA/250G4 INA326EA/250G4 INA327 precision instrumentation amplifier amplifier IC CMOS rail-to-rail input rail-to-rail output common-mode rejection gain-bandwidth product input bias current low-drift analog front end single-supply amplifier low-side shunt sensing bridge sensor signal conditioning battery current monitoring 10-VSSOP DGS package VSSOP family surface-mount package shutdown function external gain resistor Texas Instruments INA327 datasheet
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ