Renesas Electronics

ISL84051IA - 8:1 100 Ohm Analog Multiplexer | Renesas

MPN: ISL84051IA ✗ जीवन की समाप्ति
2 V to 12 V Vdss 100 ohm Rds(on) 16-QSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

ISL84051IA अवलोकन

Renesas Electronics ISL84051IA is a low-voltage, single 8-to-1 analog multiplexer with an on-resistance of 100 ohms, TTL/CMOS-compatible control inputs, and a 16-QSOP package. It supports single-supply operation from 2 V to 12 V and dual-supply operation, allowing one multiplexed analog path to select among eight signal sources.

An analog multiplexer is a semiconductor switch that routes multiple input signals to one common output. It belongs to the analog switch and multiplexer hierarchy, where a multiplexer reduces the number of external connections needed by a data-acquisition system. The ISL84051IA combines an 8-to-1 signal configuration, selectable signal polarity, and an inhibit function within a compact surface-mount package.

Principal features include an 8-to-1 configuration, 100-ohm maximum on-resistance as listed by distributors, TTL/CMOS-compatible logic inputs, and operation from 2 V to 12 V. The device can also operate from dual supplies, making it suitable for systems that must route signals centered around ground. Its low-voltage design supports analog measurement, test, and signal-routing equipment.

The ISL84051 family is designed as a pin-compatible replacement for MAX4051 and MAX4051A devices. Control logic determines which one of the eight analog inputs connects to the common output, while the inhibit pin can disconnect all signal paths. This architecture reduces input-channel count on analog-to-digital converter boards and permits several sensors or voltage sources to share one conversion channel.

Typical uses include battery-cell measurement, automated test equipment, data-acquisition systems, sample-and-hold networks, and general-purpose analog routing. Designers should account for on-resistance when calculating signal attenuation, confirm that the selected supply configuration meets the input voltage range, and treat the inhibit function as a deliberate control signal rather than a substitute for power sequencing.

PCB placement should keep analog traces short and provide a nearby ground return to minimize parasitic pickup. Input and output protection may be required when connected to external sources. The manufacturer datasheet should guide logic-level compatibility, supply sequencing, and handling of unused channels.

This page combines device specifications, verified drop-in cross-references, application guidance, and package-specific selection information to support faster engineering evaluation and sourcing decisions.

के लिए ड्रॉप-इन विकल्प ISL84051IA — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

MAX4051

✅ ड्रॉप-इन
📦 16-QSOP
Same 8-to-1 multiplexing function and documented pin compatibility; on-resistance and supply details may vary by ordering option, with MAX4051 identified as the direct MAX-family equivalent.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX4051A

✅ ड्रॉप-इन
📦 16-QSOP
Same 8-to-1 multiplexing role and documented pin compatibility; MAX4051A is the enhanced MAX-family counterpart and may differ in specified voltage, resistance, and switching details.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ISL84051IA Maximum Ratings और Electrical Characteristics

Configuration 8-to-1 analog multiplexer
Number of Circuits 1 circuit
Maximum On-Resistance 100 ohm
On-Resistance at ±5 V 60 ohm
Single-Supply Voltage Range 2 V to 12 V
Supply Configuration Single or dual supply
Logic Compatibility TTL/CMOS compatible
Signal Path Count 8 inputs to 1 output
Inhibit Function All signal paths can be opened
पैकेज 16-QSOP
माउंटिंग प्रकार Surface mount
Pb-Free Identification Pb-free device
Manufacturer Compatibility Pin compatible with MAX4051 and MAX4051A

ISL84051IA 16-qsop पिन कॉन्फ़िगरेशन गाइड

ISL84051IA (16-qsop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ISL84051IA के लिए 16-qsop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ISL84051IA.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ISL84051IA के लिए उपयुक्त है 6 अनुप्रयोगs: Battery Cell Multiplexing, Automated Test Equipment, Data Acquisition Systems, Sensor Signal Routing, Sample-and-Hold Systems, Portable Measurement Instruments.

⚡

Battery Cell Multiplexing

The ISL84051IA is well suited to low-voltage battery-cell measurement because its 8-to-1 architecture allows eight monitored sources to share one analog measurement channel while operating from a supply range that extends down to 2 V. Place the selected cell signal on the common output and connect the remaining inputs to the cells being monitored. The 100-ohm maximum on-resistance must be included in the measurement-source impedance budget, while the inhibit function can isolate the path during reset or calibration. The selected ADC should also tolerate switching transients and leakage from the multiplexer.

🏭

Automated Test Equipment

The ISL84051IA can route one of eight test signals to a shared measurement instrument, reducing the number of analog input connections in automated test equipment. Its TTL/CMOS-compatible control inputs support conventional digital control logic, and the 16-QSOP package conserves board area. The 100-ohm maximum on-resistance can affect high-impedance measurements, so the instrument input and source network should be checked together. Use the inhibit function to isolate the selected path during fixture reset, calibration, or a safety-related transition.

🖥️

Data Acquisition Systems

An ISL84051IA-based data-acquisition front end can use one converter input for eight analog channels, simplifying connector density and PCB routing. The low-voltage operation supports embedded measurement systems, while dual-supply capability permits signals centered around ground. Account for the listed 100-ohm maximum on-resistance when calculating source impedance and acquisition time. Keep the common output and selected inputs away from fast digital clocks, provide a continuous ground reference, and confirm that leakage and switching transients fall within the converter’s acquisition requirements.

🧩

Sensor Signal Routing

The ISL84051IA can select among eight sensor outputs for a common conditioning or conversion stage, reducing duplicated front-end circuitry in compact sensing systems. Low-voltage operation is useful when the sensors operate near the lower end of the supported 2 V to 12 V range. The analog switch resistance should remain small relative to the sensor and amplifier input impedances to avoid gain errors. Place the device close to the multiplexer or conditioning amplifier, maintain short return paths, and use the inhibit control when a sensor must be disconnected during system initialization.

📺

Sample-and-Hold Systems

The ISL84051IA can route one of eight rapidly changing inputs into a shared sample-and-hold stage, making it useful when a system requires source selection before a single hold capacitor. The 8-to-1 topology prevents each source from requiring a separate hold path. Designers should verify settling behavior against the resistance of the sampling network, the selected signal amplitude, and the multiplexer’s on-resistance. The inhibit function provides a clean way to open the path while the hold network is reset, helping avoid unintended charge transfer between measurement phases.

📱

Portable Measurement Instruments

The ISL84051IA suits portable measurement instruments that need to switch among several low-voltage inputs without multiplying connector pins. Its 16-QSOP package supports compact layouts, and operation down to 2 V fits battery-powered systems. The multiplexer’s 100-ohm maximum on-resistance can become significant when measuring high-impedance sensors, so buffer or compensate the selected source as appropriate. Keep the analog path away from wireless or switching-converter traces, provide local grounding, and use the inhibit input to establish a defined state during startup and shutdown.

अनुशंसित उत्पादों का सारांश

MAX4051 Pin-compatible 8-to-1 multiplexer option उपयोग में: Battery Cell Multiplexing, Data Acquisition Systems, Sample-and-Hold Systems MAX4051A Pin-compatible 8-to-1 multiplexer option उपयोग में: Automated Test Equipment, Sensor Signal Routing, Portable Measurement Instruments
What is the ISL84051IA?
The ISL84051IA is a single 8-to-1 low-voltage analog multiplexer with a 100-ohm maximum on-resistance, TTL/CMOS-compatible control inputs, and a 16-QSOP package. According to the Renesas ISL84051, ISL84052, ISL84053 datasheet, the device supports single and dual supplies and includes an inhibit function for opening all signal paths.
What is the operating voltage range of ISL84051IA?
The ISL84051IA supports a 2 V to 12 V single-supply range and can also operate from dual supplies. According to the Renesas ISL84051, ISL84052, ISL84053 datasheet, the exact positive and negative rail limits for every dual-supply configuration must be checked against the device specifications before applying the switch to a new signal range.
What is the on-resistance of ISL84051IA?
The ISL84051IA has a listed maximum on-resistance of 100 ohms, while a comparison source identifies 60 ohms at ±5 V. According to the Renesas ISL84051, ISL84052, ISL84053 datasheet, use the detailed on-resistance versus supply-voltage curves when calculating insertion loss because the effective resistance depends on operating conditions.
Where can I download the ISL84051IA datasheet PDF?
The ISL84051IA datasheet is available from Renesas through the ISL84051, ISL84052, ISL84053 datasheet document page. That document covers the low-voltage 8-to-1 multiplexer, dual 4-to-1 multiplexer, and triple SPDT switch family, providing the starting point for pin assignments, electrical limits, and supply configurations.
Where is the ISL84051IA pinout?
The ISL84051IA uses a 16-QSOP package, and its numbered pin assignments are shown in the Renesas ISL84051, ISL84052, ISL84053 datasheet. Use the pin-description table and package drawing when assigning selector, enable, inhibit, supply, and analog-signal traces; the public product summary does not reproduce a complete pin-by-pin list.
What can replace the ISL84051IA?
The MAX4051 and MAX4051A are identified as pin-compatible drop-in replacements for the ISL84051 function. The ISL84051 family documentation specifically states that these devices are drop-in replacements for MAX4051 and MAX4051A, allowing a supply-chain review to focus on operating conditions, qualification requirements, and availability rather than redesigning the circuit.
Is the ISL84051IA the same as the MAX4051A?
The ISL84051IA provides the same 8-to-1 multiplexing role as the MAX4051A and is documented as pin compatible with it. The manufacturer family documentation identifies MAX4051A compatibility, but engineers should still verify supply limits, control logic levels, on-resistance, leakage, and the exact package suffix before approving a direct substitution.
Is the MAX4051 a drop-in replacement for ISL84051IA?
The MAX4051 is a documented drop-in replacement candidate for the ISL84051 because the Renesas family datasheet identifies pin compatibility and a drop-in relationship. A production substitution should additionally confirm the selected MAX4051 package, supply configuration, electrical limits, and operating-temperature requirements.
When should I choose ISL84051IA instead of MAX4051?
Choose the ISL84051IA when its documented supply range, inhibit behavior, logic compatibility, and lifecycle position better match the target system. Choose the MAX4051 when the existing board was designed around that function and an alternate sourcing path is needed. Both options require pin and parameter review, especially for on-resistance, leakage, and supply limits.
Is ISL84051IA suitable for battery-cell measurement?
The ISL84051IA is suitable for low-voltage battery-cell measurement because it supports operation down to 2 V and provides an 8-to-1 configuration for sharing one measurement channel among multiple cells. Its 100-ohm maximum on-resistance must be included in the source impedance budget, and the selected ADC should tolerate the multiplexer’s switching transients and leakage.
Does ISL84051IA require an inhibit pin?
The ISL84051IA includes an inhibit function that can open all signal paths simultaneously. According to the Renesas ISL84051, ISL84052, ISL84053 datasheet, this provides a way to isolate the selected analog path during measurement-system reset, calibration, or power-control sequences.
How should on-resistance affect ISL84051IA signal accuracy?
The ISL84051IA contributes an effective series resistance in the selected signal path, so higher resistance increases signal attenuation and can interact with the input impedance of the following converter. Use the 100-ohm maximum listed by distributors and the 60-ohm value reported at ±5 V as design references, then verify the applicable curve for the actual supply and signal amplitude.
Where can I buy ISL84051IA and what is its price?
The ISL84051IA can be requested through the Request a Quote form on this page for current commercial availability and delivery information. The form is the appropriate route for a quotation because component pricing, lot conditions, and supply status can change; use the exact ISL84051IA suffix when submitting the request.
What is the lead time for ISL84051IA?
Use the Request a Quote form on this page to request the current lead time, minimum order quantity, and available shipment options for ISL84051IA. Lead time depends on inventory, manufacturer status, and order configuration, so an old catalog or distributor availability statement should not be treated as a current supply commitment.
Is ISL84051IA in stock?
Current stock for ISL84051IA should be confirmed through the Request a Quote form on this page. The form allows the exact 16-QSOP ordering code to be checked against the requested quantity and delivery schedule, avoiding reliance on an outdated availability indication.
What are the key specifications of ISL84051IA that engineers should know?
The key ISL84051IA specifications are its 8-to-1 configuration, 100-ohm maximum on-resistance, 2 V to 12 V single-supply operation, dual-supply capability, TTL/CMOS-compatible logic, inhibit function, and 16-QSOP package. The Renesas family datasheet is the controlling reference for detailed limits, timing, leakage, and absolute maximum ratings.
Is ISL84051IA compliant with RoHS and REACH?
The ISL84051IA is identified as a Pb-free device, but the available technical summaries do not explicitly state its RoHS, REACH, AEC-Q100, or halogen-free status. Request the current manufacturer material or declaration for the ordered MPN before using those compliance claims in a qualification document.
What is the best Analog Devices equivalent for ISL84051IA?
No Analog Devices equivalent is established by the available manufacturer and cross-reference information for the ISL84051IA. The documented alternatives are the MAX4051 and MAX4051A, which are identified as pin-compatible drop-in relationships. For a different manufacturer, request a formal cross-reference and verify the complete pinout and electrical limits before substitution.

के लिए इंजीनियरिंग संदर्भ डेटा ISL84051IA — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ISL84051IA for a new low-voltage, 8-to-1 analog-routing design when its 2 V to 12 V single-supply range, dual-supply capability, TTL/CMOS-compatible controls, inhibit function, and 16-QSOP package align with the system architecture. It is particularly useful when one ADC or analog front end must monitor eight sources and the 100-ohm maximum on-resistance is acceptable for the required accuracy.

Choose the MAX4051 when maintaining an existing MAX-family design and qualifying that established alternative is preferable to changing the component manufacturer. Choose the MAX4051A for a board tied specifically to that enhanced MAX-family variant, after checking its detailed electrical limits and package ordering code. Both MAX devices are documented as pin-compatible drop-in relationships for the ISL84051 function, but supply limits, leakage, switching timing, temperature grade, and availability must be checked for the exact ordering option before releasing a substitution to production.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX4051 MAX4051A
Multiplexer Configuration 8-to-1 8-to-1 8-to-1
Number of Circuits 1 circuit 1 circuit 1 circuit
Package 16-QSOP 16-QSOP 16-QSOP
Brand Renesas Electronics Maxim Integrated Maxim Integrated
Drop-In Relationship Replaces MAX4051 and MAX4051A Pin-compatible MAX-family equivalent Pin-compatible MAX-family equivalent

मुख्य विशेषताएँ

  • Direct documented relationship with the MAX4051 family (बनामMAX4051)
  • Defined 16-QSOP implementation (बनामMAX4051)
  • Low-voltage single- and dual-supply operation (बनामMAX4051A)

डिज़ाइन नोट्स

Include the switch’s on-resistance when calculating the Thevenin source impedance seen by the following converter or amplifier. The distributor listing specifies a 100-ohm maximum, while another technical summary identifies 60 ohms at ±5 V. For high-impedance sensors, verify the actual resistance curve at the operating supply and signal level; if the resulting divider error is excessive, place a low-input-impedance buffer after the multiplexer.

Place the 16-QSOP close to the analog source connector and the receiving converter or amplifier. Keep the common output and all eight input routes short, provide a continuous ground reference, and avoid routing these traces beneath digital clocks, display signals, or switching-regulator nodes. This arrangement reduces parasitic pickup and makes the 100-ohm switch resistance less significant relative to the complete analog path.

Do not treat the inhibit input as a substitute for removing power or for managing an overvoltage condition. Use it to open the signal paths during reset, calibration, or controlled isolation. Confirm the logic polarity and timing from the manufacturer datasheet, and ensure that every unused analog input is connected to a defined potential. Floating inputs can introduce coupling into measurements even when the selected channel is inactive.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Yes
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available comparison information identifies ISL84051IA as a Pb-free device. Explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations are not stated.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ISL84051IA datasheet ISL84051IA pinout ISL84051IA datasheet pdf ISL84051IA equivalent ISL84051IA replacement ISL84051IA cross reference ISL84051IA footprint ISL84051IA 16-QSOP ISL84051IA 8:1 multiplexer ISL84051IA 100 ohm ISL84051IA vs MAX4051 ISL84051IA price ISL84051IA stock Renesas ISL84051IA ISL84051IA application circuit

संबंधित कंपोनेंट्स और शब्द

Renesas Electronics ISL84051IA ISL84051 ISL84052 ISL84053 MAX4051 MAX4051A Maxim Integrated 8-to-1 analog multiplexer analog switch multiplexer interface IC semiconductor TTL CMOS single supply dual supply on-resistance inhibit pin 16-QSOP QSOP family surface mount SMD battery-cell measurement data acquisition
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें