ISL8485CB-T - 5V RS-485/RS-422 Transceiver | Renesas
MPN: ISL8485CB-T ✓ सक्रियISL8485CB-T अवलोकन
An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals between a host controller and a differential communication bus. The driver transmits complementary differential signals, while the receiver detects the voltage difference across the pair. As a single-channel half-duplex transceiver, the ISL8485CB-T supports one communication line while sharing the same package and bus connection structure used by related ISL8485 devices.
The family is specified for 10% supply tolerance, providing a 4.5 V to 5.5 V operating range. Its BiCMOS construction supports low power consumption while operating at rates up to 5 Mbps. The ISL8485CB-T also provides ESD-protected, single-driver, single-receiver operation, making it suitable for point-to-point RS-422 links and multidrop RS-485 networks that require compact, surface-mount transceivers.
Renesas describes the ISL8485 family as a collection of 5 V-powered RS-485 and RS-422 transceivers. The CBZ-T ordering code is associated with a lead-free and RoHS-compliant version, while the CB-T designation identifies the tape-and-reel ordering configuration used in this listing. The 8-pin SOIC package supports conventional surface-mount assembly and is compatible with compact industrial and embedded control equipment.
Typical uses include industrial serial links, factory automation equipment, building controls, instrumentation, and embedded systems communicating over long differential cable runs. The 5 Mbps maximum data rate supports moderately high-speed control and data traffic, while the one-unit-load bus loading helps preserve network capacity when multiple transceivers share a bus.
PCB design should account for the difference between supply current and bus return current. Place the transceiver close to the connector and transceiver protection network, keep the differential pair routed as a tightly coupled pair, and provide the supply bypass capacitance recommended by the manufacturer. The 8-pin SOIC footprint should be checked against the PCB library before substitution because narrow-body variants can differ in lead width and courtyard dimensions.
This product page combines the manufacturer family description, distributor package and ordering information, current sourcing records, interface characteristics, and practical replacement guidance. It also distinguishes the exact ISL8485CB-T ordering code from related ISL8485 variants so engineers can evaluate footprint, supply, ESD, and rate requirements before approving a replacement.
के लिए ड्रॉप-इन विकल्प ISL8485CB-T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
ISL8485IBZ-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ISL8485EIBZ-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ISL8485CBZ-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ISL8485CB-T विशेषताएं
| Product Type | RS-485/RS-422 line transceiver |
| सप्लाई वोल्टेज | 5 V |
| Operating Supply Range | 4.5 V to 5.5 V |
| Maximum Data Rate | 5 Mbps |
| Driver Count | 1 driver |
| Receiver Count | 1 receiver |
| Duplex Configuration | Half-duplex |
| RS-485 Bus Loading | 1 unit load |
| Process Technology | BiCMOS |
| ESD Protection | ±15 kV |
| पैकेज | 8-pin SOIC, 0.154 inch (3.90 mm) width |
| माउंटिंग प्रकार | Surface Mount |
| Ordering Package | Tape & Reel |
| RoHS स्थिति | Compliant |
| लाइफसाइकिल स्थिति | Active |
ISL8485CB-T tape & reel पिन कॉन्फ़िगरेशन गाइड
ISL8485CB-T (tape & reel पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ISL8485CB-T.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ISL8485CB-T के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial RS-485 Control Networks, Point-to-Point RS-422 Links, Building and Automation Controllers, Factory Automation Equipment, Test and Measurement Instrumentation, Embedded Serial Gateways.
Industrial RS-485 Control Networks
The ISL8485CB-T fits industrial control networks that require a compact 5 V differential interface and communication rates up to 5 Mbps. Its single driver and receiver form a half-duplex channel, while the documented one-unit-load bus loading helps preserve capacity in multidrop RS-485 systems. Place the transceiver between the controller UART and the protected bus connector, then use matched differential routing for the cable connection. Because the device is specified for a 4.5 V to 5.5 V supply range, the design must maintain that range during startup and bus faults. Termination, fail-safe biasing, and isolation strategy remain application-level choices rather than functions established by the transceiver itself.
अनुशंसित
Point-to-Point RS-422 Links
The ISL8485CB-T is appropriate for point-to-point RS-422 links where separate differential driver and receiver functions communicate over balanced cabling. Its 5 Mbps maximum data rate accommodates supervisory, data acquisition, and equipment-control traffic when cable length and loss permit. The 8-pin SOIC package preserves a conventional surface-mount footprint and supports compact interface sections. In a point-to-point circuit, retain the full-duplex benefit of separate transmit and receive paths and provide termination at the appropriate cable endpoints. Validate signal polarity, idle state, and receiver enable requirements against the exact ISL8485CB-T pin description before finalizing the schematic.
अनुशंसित
Building and Automation Controllers
The ISL8485CB-T can connect an embedded controller to building-automation equipment operating on an RS-485 bus. Its one-unit-load presentation is valuable when floor controllers, sensors, and gateways share a wired communication backbone. The 5 V transceiver core integrates neatly with low-voltage control logic, while the 8-pin SOIC package supports compact, high-density boards. Designers should separate the transceiver's clean supply path from noisy actuator circuits and route the differential pair away from switching nodes. A surge-protection network at the external connector should be selected for the installation's ESD and lightning exposure, with its effect on bus rise time and data rate reviewed before implementation.
अनुशंसित
Factory Automation Equipment
The ISL8485CB-T supports factory-automation modules that exchange commands and diagnostics with remote actuators, sensors, and motor controllers. Its 5 Mbps capability is useful for service data and fast control traffic on appropriately short and properly terminated buses, while the one-unit-load bus presentation allows additional nodes to participate. Position the transceiver near the field connector so transient-energy protection can be placed ahead of the sensitive IC. Keep the differential route paired and controlled over the distance where possible. The principal trade-off is that a half-duplex single-channel transceiver needs a defined direction-control strategy, so firmware and schematic logic must avoid simultaneous transmission and receiver conflicts.
अनुशंसित
Test and Measurement Instrumentation
The ISL8485CB-T is useful in laboratory and field-test instruments that need a compact, high-speed differential link between a controller and remote fixture. Its 8-pin SOIC package simplifies assembly on mixed-signal boards, and the 4.5 V to 5.5 V range accommodates common 5 V instrument architectures. Differential routing helps reject common-mode noise present near motors, relays, and switching power stages. When integrating the device into high-accuracy equipment, compare the transceiver's receive threshold and switching behavior with the measurement bandwidth. The bus interface improves communication integrity, but it does not replace isolation, shielding, or grounding required by sensitive analog front ends.
अनुशंसित
Embedded Serial Gateways
The ISL8485CB-T bridges a low-voltage embedded UART to a legacy RS-485 or RS-422 field bus in industrial gateways and remote terminal units. Its 5 Mbps capability supports high-throughput firmware transfer and burst data transfer, while the compact 8-pin SOIC package leaves board area for other interface functions. The one-unit-load characteristic helps when multiple field devices share a segment. Implement a deterministic direction-control circuit or firmware state machine, and define behavior when the bus is idle, shorted, or undriven. External protection should be referenced to the transceiver ground strategy to prevent fault energy from propagating into the controller section.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ISL8485CB-T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ISL8485IBZ-T | ISL8485EIBZ-T | ISL8485CBZ-T |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver | RS-485/RS-422 line transceiver | RS-485/RS-422 transceiver |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Operating Supply Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Maximum Data Rate | 5 Mbps | 5 Mbps | 5 Mbps | 5 Mbps |
| Driver and Receiver Count | 1 driver, 1 receiver | 1 driver, 1 receiver | 1 driver, 1 receiver | 1 driver, 1 receiver |
| Bus Loading | 1 unit load | 1 unit load | 1 unit load | 1 unit load |
मुख्य विशेषताएँ
- Exact CB-family ordering configuration (बनामISL8485CBZ-T)
- Same-package Renesas upgrade path (बनामISL8485EIBZ-T)
- Direct family alternative with matching bus loading (बनामISL8485IBZ-T)
डिज़ाइन नोट्स
Route the RS-485 and RS-422 signals as a tightly coupled differential pair from the transceiver to the protection network and connector. Avoid crossing splits between the two conductors, keep the pair away from switching nodes and high-current paths, and minimize stub lengths. Use the package pin-description table in the manufacturer datasheet to preserve the intended pin assignments and maintain a consistent ground reference between the transceiver and protection devices.
Do not treat the CB-T, CBZ-T, IBZ-T, and EIBZ-T suffixes as interchangeable without checking the ordering table and electrical characteristics. The narrow 8-SOIC footprint may appear compatible, but driver strength, slew rate, enable behavior, receiver thresholds, and qualification can vary. Before substitution, compare the exact manufacturer datasheets and confirm that the replacement retains the required 4.5 V to 5.5 V supply range, data-rate capability, and bus loading.
Place a suitable protection network at the external connector and connect it to the transceiver's defined ground strategy. Select components so that protection capacitance does not distort the intended edge rate or violate the receiver's common-mode limits. For factory and building installations, evaluate the ESD and surge environment separately because a connector-side protection network may require coordination with cable shielding, chassis grounding, and isolated systems.
Keep the 5 V transceiver supply within 4.5 V to 5.5 V and decouple it close to the IC. The transceiver supply current is distinct from the current delivered through the communication bus, so supply sizing should account for both internal consumption and external loads. Review whether the 5 V rail experiences startup droop or switching noise from nearby actuators, and avoid routing the bus return through a high-impedance logic-ground path.
अनुपालन जानकारी
The ISL8485EIBZ-T comparison identifies the related Renesas variant as RoHS-compliant and lead-free. The ISL8485CB-T exact ordering code should be confirmed against the manufacturer ordering table for its final environmental status.