Renesas Electronics

ISL8487IBZ - 5V RS-485/RS-422 Transceiver | Renesas

MPN: ISL8487IBZ ✓ सक्रिय
5 V Vdss 8-pin SOIC, 3.90 mm width Package
न्यूनतम ऑर्डर मात्रा: 1 |

ISL8487IBZ अवलोकन

The Renesas Electronics ISL8487IBZ is a 5 V, single-channel RS-485 and RS-422 transceiver in an 8-pin SOIC package. It combines one driver and one receiver, supports a fractional 1/8 unit load, and provides the differential interface required by balanced industrial-communication links. The device is identified as an ESD-protected 8-SOIC transceiver, making it suitable for compact RS-485 equipment, multidrop field buses, industrial control systems, and point-to-point RS-422 links.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into differential voltage waveforms for reliable communication over balanced copper cables. The transmitter drives a differential output, while the receiver converts the differential input into a logic-level signal. By placing a common-mode voltage range and differential signaling between two conductors, this interface class supports improved noise immunity compared with single-ended communication. The ISL8487 family therefore sits between a host controller and a physical network such as Modbus RTU, PROFIBUS-related equipment, or proprietary industrial buses.

The ISL8487IBZ operates from a 5 V supply and is designed for low-power, high-speed or slew-rate-limited communication. Its fractional 1/8 unit-load characteristic allows more receiving nodes on a multidrop bus than a conventional one-unit-load transceiver. Because the package contains one transmitter and one receiver, it can support half-duplex communication when the driver and receiver controls are managed by the host. The device also includes ESD protection, an important feature for transceiver devices connected to external cables and field-accessible equipment.

The family is described as BiCMOS and is designed to meet RS-485 and RS-422 balanced-communication requirements. Its low-power operation suits distributed equipment where every milliampere can affect system thermal design. In half-duplex networks, the receiver may remain active while the driver is disabled, allowing the attached controller to detect responses or bus contention. Designers should still control the enable and disable timing to prevent the driver from fighting an external driver during bus turnaround.

Typical uses include industrial sensor gateways, PLC communication ports, building-control terminals, instrumentation, data-acquisition equipment, and factory automation nodes. The 8-SOIC package also supports compact peripheral boards where a larger multi-channel transceiver would be unnecessary. In a typical multidrop network, the ISL8487IBZ connects a UART or embedded controller to the balanced bus, while termination and biasing components are placed only where required by the network topology.

The main design consideration is cable-side protection. Although the device includes ESD protection, the maximum bus voltage, common-mode range, ground-reference limits, connector placement, and external surge-protection requirements must be checked against the application environment. Keep the balanced pair tightly coupled, connect the transceiver ground reference appropriately, and verify termination and fail-safe behavior for the selected operating mode. The 5 V supply should be decoupled close to the device, and unused control inputs must not float.

This page combines the component identity, RS-485/RS-422 interface characteristics, package information, replacement guidance, comparison details, and practical PCB-design considerations into a focused engineering reference. It also identifies the available same-package alternatives and distinguishes the verified role of each candidate for drop-in replacement decisions.

के लिए ड्रॉप-इन विकल्प ISL8487IBZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

ISL8487EIBZ

✅ ड्रॉप-इन
📦 8-SOIC
Supply voltage remains 5 V (0% change) and receiver loading remains 1/8 unit load (0% change); driver-enable and receiver-enable polarity differs.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX487ECSA+

✅ ड्रॉप-इन
📦 8-SOIC
Maintains an 8-SOIC RS-485/RS-422 footprint and 5 V class operation; exact unit load, enable polarity, data rate, and ESD rating require final datasheet comparison.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ISL8487IBZ विशेषताएं

Product Type Single RS-485/RS-422 transceiver
सप्लाई वोल्टेज 5 V
Number of Drivers 1
Number of Receivers 1
Bus Standard RS-485 and RS-422
Unit Load 1/8 unit load
Signaling Differential balanced signaling
Communication Mode Half-duplex
Process Technology BiCMOS
ESD Protection Yes
पैकेज 8-pin SOIC, 3.90 mm width
Package Type Surface-mount SOIC
पिन काउंट 8 pins

ISL8487IBZ surface-mount soic पिन कॉन्फ़िगरेशन गाइड

ISL8487IBZ (surface-mount soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ISL8487IBZ के लिए surface-mount soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ISL8487IBZ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ISL8487IBZ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial RS-485 Sensor Gateway, PLC and Factory-Control Communication Port, Building-Control and HVAC Terminal, Data-Acquisition Instrument, RS-422 Point-to-Point Link, Motorized Equipment and Remote Actuator.

🏭

Industrial RS-485 Sensor Gateway

The ISL8487IBZ fits an industrial sensor gateway by placing one differential transceiver between a host UART and a field bus. Its 5 V operation, one-driver and one-receiver arrangement, and 1/8 unit-load rating support a multidrop network with multiple receiving nodes. The controller can keep the receiver active for bus monitoring while asserting the driver only during transmission, reducing contention and avoiding a second physical interface. In a practical implementation, the balanced pair should be routed as a tightly coupled differential pair, with termination and fail-safe biasing fitted according to the network topology. The 8-SOIC format also keeps the interface compact enough for a densely populated gateway board while preserving separate driver and receiver control.

🏭

PLC and Factory-Control Communication Port

The ISL8487IBZ is appropriate for a PLC communication port that must connect a controller to a balanced RS-485 bus. The 1/8 unit-load characteristic permits a bus containing more than two receiving nodes, while differential signaling improves immunity to industrial noise compared with a single-ended UART. A half-duplex arrangement reduces the number of interface channels required because the same IC contains both the transmitter and receiver. Firmware should enforce a defined turnaround interval so that local transmission ends before another node responds. Board layout should keep the cable-side connection near the transceiver, provide a stable ground reference, and use the manufacturer data to select termination, fail-safe biasing, and any external surge-protection components.

🧩

Building-Control and HVAC Terminal

The ISL8487IBZ can connect a building-control terminal to an RS-485 backbone where low power and compact packaging are important. Its 5 V supply matches common embedded-control rails, and the single-driver, single-receiver arrangement supports half-duplex command and response traffic over one balanced pair. The fractional 1/8 unit load is particularly useful when the controller coordinates multiple indoor units, sensors, or powered field devices on one bus segment. For reliable operation, use the same pair for communication and non-twisted stubs only when permitted by the bus topology. Keep enable timing under firmware control, prevent floating inputs, and verify that the transceiver's operating limits match the building's temperature range and cable length.

🔧

Data-Acquisition Instrument

The ISL8487IBZ is suitable for a data-acquisition instrument that must exchange commands or measurements over RS-485 or RS-422. The differential interface helps preserve data integrity when the instrument is connected to a long cable or shares an enclosure with switching converters and motors. One transceiver is sufficient for a half-duplex controller channel, and the 1/8 unit-load rating allows the instrument to participate in a multidrop measurement network. Place the IC near the input or output connector, maintain consistent spacing between the differential conductors, and provide a local ground reference without forcing large ground currents through the signal pair. External protection should be considered when the instrument port is accessible from the field or connected through external wiring.

🌐

RS-422 Point-to-Point Link

The ISL8487IBZ supports a point-to-point RS-422 interface because its driver and receiver implement balanced differential signaling in a single 8-SOIC device. In a full-duplex RS-422 design, however, two physically independent communication paths are normally required, so a single ISL8487 channel can implement one direction or a half-duplex arrangement rather than both RS-422 directions by itself. The 5 V interface is compatible with many embedded UART systems, and the low-power family design helps limit system consumption. Confirm the receiver logic, driver timing, cable termination, and maximum data rate against the manufacturer datasheet. For a bidirectional RS-422 port, evaluate a second transceiver or a dual-channel interface according to the required topology.

⚡

Motorized Equipment and Remote Actuator

The ISL8487IBZ can provide the command interface between a controller and a remote motorized actuator connected over an RS-485 field bus. The differential bus is useful in environments containing motor drives, relays, and switching supplies because it reduces susceptibility to common-mode noise. Its 1/8 unit-load rating supports several nodes on a shared segment, while the 5 V supply is convenient for embedded motor controllers. Driver-enable and receiver-enable signals should be sequenced so the device does not contend with another node during an emergency stop or status response. Protect the cable-side circuit according to the motor environment, maintain a low-impedance ground reference, and keep termination and biasing away from the transceiver pins except where the network configuration requires them.

अनुशंसित उत्पादों का सारांश

ISL8487EIBZ Same-family SOIC-8 alternative with different enable polarity उपयोग में: Industrial RS-485 Sensor Gateway, PLC and Factory-Control Communication Port, Building-Control and HVAC Terminal, Data-Acquisition Instrument, RS-422 Point-to-Point Link, Motorized Equipment and Remote Actuator MAX487ECSA+ Cross-brand RS-485/RS-422 comparison candidate उपयोग में: Industrial RS-485 Sensor Gateway, PLC and Factory-Control Communication Port, Building-Control and HVAC Terminal, Data-Acquisition Instrument, RS-422 Point-to-Point Link, Motorized Equipment and Remote Actuator
What is the ISL8487IBZ?
The ISL8487IBZ is a Renesas Electronics single-channel transceiver for balanced RS-485 and RS-422 communication. It combines one driver and one receiver, operates from a 5 V supply, supports a 1/8 unit load, and is packaged in an 8-pin SOIC. The Intersil manufacturer datasheet identifies the ISL8487 family as a low-power BiCMOS interface for high-speed or slew-rate-limited balanced communications.
What is the ISL8487IBZ pinout?
The ISL8487IBZ uses an 8-pin SOIC package with one driver and one receiver for RS-485/RS-422 signaling. Use the pin-description table and package drawing in the Intersil manufacturer datasheet when assigning PCB tracks, particularly for the driver-enable, receiver-enable, data, receive-output, ground, and differential bus connections. Confirm every signal against the selected operating mode before fabrication.
Where can I download the ISL8487IBZ datasheet PDF?
The ISL8487 datasheet is available through the Intersil manufacturer-document listing identified in the product documentation, while the Renesas part appears on the manufacturer-linked distributor product page. The Intersil document is a 13-page PDF covering the 5 V, low-power, 1/8-unit-load RS-485/RS-422 transceiver family. Use the exact ISL8487IBZ ordering code when checking package and temperature-related options.
Where can I buy ISL8487IBZ online?
Use the Request a Quote form on this page to request the current ISL8487IBZ unit price, stock, minimum order quantity, and shipment timing. The form is the direct commercial channel for this product and avoids a static price that may change with availability. For technical qualification, include the required temperature grade, package, quantity, and destination country in the request.
How much does the ISL8487IBZ cost?
Current ISL8487IBZ pricing should be obtained through the Request a Quote form on this page because commercial prices depend on quantity, availability, and supply conditions. The form can provide the unit price for one device as well as volume breaks, allowing procurement to compare complete order costs. No fixed price should be copied into a long-term engineering budget without confirming the current quotation.
What is the lead time for ISL8487IBZ?
Request the current lead time and available quantity through the Request a Quote form on this page. Lead time can vary with the ordered quantity, manufacturing availability, and shipment destination, so a quote provides the most appropriate commercial commitment for the exact ISL8487IBZ ordering code. Include the required delivery date and production schedule when submitting the request.
Is the ISL8487IBZ in stock?
Current ISL8487IBZ stock should be confirmed through the Request a Quote form on this page. Enter the required quantity and packaging preference to obtain an availability response for the exact 8-pin SOIC device. For production planning, request a scheduled allocation or shipment date in addition to the quantity on hand so that procurement can assess continuity of supply.
What are the key specifications of ISL8487IBZ that engineers should know?
The ISL8487IBZ is a 5 V, single-driver and single-receiver RS-485/RS-422 interface IC with a 1/8 unit load, ESD protection, and an 8-pin SOIC package. Its fractional unit-load rating permits several receiving nodes on one multidrop bus, while the differential balanced interface supports noise-resistant field-bus communication. The manufacturer identifies the family as low-power BiCMOS technology.
ISL8487IBZ vs ISL8487EIBZ - which is better for an RS-485 bus?
The ISL8487IBZ and ISL8487EIBZ are both described as 5 V, 1/8-unit-load, 8-SOIC RS-485/RS-422 transceivers, but their enable behavior differs. The ISL8487EIBZ is the relevant alternative when a design requires the E-version control polarity. The 5 V supply and fractional unit load are unchanged, so both maintain the same broad bus-loading class while preserving the SOIC-8 footprint.
When should I choose the ISL8487IBZ over the ISL8487EIBZ?
Choose the ISL8487IBZ when the board logic is designed around its driver-enable and receiver-enable polarity. Choose the ISL8487EIBZ when that version's opposite control polarity simplifies an existing interface arrangement. Both devices occupy the 8-SOIC package and provide a 5 V, 1/8-unit-load RS-485/RS-422 transceiver, so selection should be based on control polarity and the complete manufacturer data rather than package availability.
Is the ISL8487IBZ suitable for multidrop industrial communication?
The ISL8487IBZ is suitable for multidrop industrial links because it supports both RS-485 and RS-422, uses differential balanced signaling, and has a 1/8 unit-load receiver rating. Its one-driver, one-receiver configuration suits half-duplex UART connections when host firmware manages bus turnaround. Network termination, fail-safe biasing, grounding, and cable protection must be designed for the complete bus.
What is the best drop-in replacement for ISL8487IBZ?
The closest identified drop-in candidate is the Renesas ISL8487EIBZ because it uses the same 8-pin SOIC package and retains the 5 V, 1/8-unit-load RS-485/RS-422 configuration. Its driver-enable and receiver-enable polarity differs, so the existing firmware and control connections must be checked. Do not treat a different package or RS-232-only device as a true drop-in replacement.
Can the MAX487ECSA+ replace the ISL8487IBZ?
The MAX487ECSA+ can be evaluated as a cross-brand SOIC-8 RS-485/RS-422 replacement, but it should not be approved without comparing its exact pinout, enable polarity, unit-load rating, data rate, common-mode range, and ESD rating. It is included as a comparison candidate rather than a guaranteed substitution. Verify the complete manufacturer datasheet and test the finished interface across worst-case bus conditions.
How should the ISL8487IBZ be used in a half-duplex RS-485 circuit?
Connect the transceiver between the host UART and the balanced pair, then manage the driver-enable and receiver-enable inputs so the driver is active only during transmission. The receiver can remain enabled to observe bus activity, depending on the chosen control scheme. Avoid enabling the driver while another node drives the bus, and follow the manufacturer datasheet for termination, fail-safe biasing, and ground-reference requirements.
What PCB precautions apply to the ISL8487IBZ?
Place the ISL8487IBZ close to the connector or transceiver boundary so the exposed cable-side route is as short as practical. Route the RS-485 differential pair together with uniform spacing, connect the transceiver ground reference appropriately, and keep switching-node copper away from the balanced pair. Add termination and fail-safe components according to the network topology, and evaluate additional surge protection when the port is exposed to severe industrial transients.

के लिए इंजीनियरिंग संदर्भ डेटा ISL8487IBZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ISL8487IBZ for a 5 V RS-485 or RS-422 interface that requires one driver and one receiver in an 8-SOIC footprint, particularly when a multidrop bus benefits from the documented 1/8 unit load. Choose the ISL8487EIBZ when its enable polarity matches the existing board and firmware, since it retains the same voltage, bus-loading class, and package. Evaluate the MAX487ECSA+ as a cross-brand candidate only after checking the complete pinout and electrical ratings, particularly unit load, enable polarity, data rate, common-mode range, and ESD level. For designs requiring true full-duplex RS-422, verify channel count because the ISL8487IBZ contains only one driver and one receiver. Whichever device is selected, confirm temperature grade, cable protection, termination, fail-safe behavior, and lifecycle status before releasing a production BOM.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ISL8487EIBZ MAX487ECSA+
Brand Renesas Electronics Renesas Electronics Analog Devices
Package 8-SOIC 8-SOIC 8-SOIC
Product Type Single RS-485/RS-422 transceiver Single RS-485/RS-422 transceiver Single RS-485/RS-422 transceiver
Supply Voltage 5 V 5 V 5 V
Drivers 1 1 1
Receivers 1 1 1
ESD Protection Yes Yes Yes

मुख्य विशेषताएँ

  • Same-family enable-polarity alternative (बनामISL8487EIBZ)
  • Multidrop loading supports compact RS-485 networks (बनामMAX487ECSA+)
  • Single integrated RS-485/RS-422 channel (बनामMAX487ECSA+)

डिज़ाइन नोट्स

Place the ISL8487IBZ near the external communication connector and route the balanced conductors as a tightly coupled differential pair. Avoid creating long stubs, discontinuities, or large loops between the transceiver and connector. Keep the interface ground reference close to the device and isolate cable-side return currents from switching-power paths. This arrangement reduces the antenna area that can convert external electromagnetic fields into differential noise.

Do not allow the ISL8487IBZ driver to remain enabled while another node transmits. Firmware should provide a defined driver-disable delay and receiver-enable strategy for half-duplex communication. Also avoid floating enable inputs because undefined control states can create contention or unreliable bus monitoring. Validate timing under the worst supported baud rate and cable length rather than relying only on nominal laboratory conditions.

Use termination and fail-safe biasing only where required by the RS-485 network topology. Excess termination can overload the driver, while insufficient or incorrectly placed termination can create reflections. Keep bias resistors physically close to the appropriate endpoint and confirm their values against the receiver threshold and the number of connected nodes. ESD protection is useful for exposed ports, but it does not replace a complete assessment of surge, ground-fault, and cable-length requirements.

Decouple the 5 V supply locally and provide a low-impedance return from the transceiver ground. Keep the supply and ground planes continuous beneath the 8-SOIC device, and observe the manufacturer's input-capacitor recommendations. Since this is an interface IC rather than a power semiconductor, SOA is not applicable; thermal design should instead focus on the system enclosure temperature and any regulator or regulator-loss contribution at the transceiver.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer document describes a 5 V BiCMOS RS-485/RS-422 transceiver family, but no explicit environmental or material-compliance declarations were included in the product documentation reviewed for this entry. AEC-Q100 is not applicable to this general-purpose interface IC.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ISL8487IBZ datasheet ISL8487IBZ datasheet pdf ISL8487IBZ pinout ISL8487IBZ equivalent ISL8487IBZ replacement ISL8487IBZ drop-in substitute ISL8487IBZ vs ISL8487EIBZ ISL8487IBZ vs MAX487ECSA+ Renesas ISL8487IBZ ISL8487IBZ 8-SOIC transceiver ISL8487IBZ 5V RS-485 ISL8487IBZ RS-422 interface ISL8487IBZ price ISL8487IBZ stock ISL8487IBZ 1/8 unit load

संबंधित कंपोनेंट्स और शब्द

Renesas Electronics Intersil ISL8487IBZ ISL8487EIBZ MAX487ECSA+ RS-485 RS-422 half-duplex transceiver differential transceiver balanced signaling interface IC 1/8 unit load multidrop bus BiCMOS 5 V transceiver 8-SOIC SOIC family surface-mount package ESD protection driver enable receiver enable industrial communication field bus termination fail-safe biasing
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें