KSZ8462FHLI - 2-Port 10/100 Ethernet Switch | Microchip
MPN: KSZ8462FHLI ✗ जीवन की समाप्तिKSZ8462FHLI अवलोकन
An Ethernet switch is a network-semiconductor device that receives frames from one or more ports and forwards them toward the appropriate destination port or connected host. The KSZ8462 belongs to the EtherSynch product line, a family of Ethernet switches designed for industrial communication and precise synchronization. Its general-purpose host interface gives an embedded processor access to network traffic while supporting both 8-bit and 16-bit bus configurations.
The principal features of the KSZ8462FHLI include two 10/100 Mb/s Ethernet ports, IEEE 1588v2-enabled synchronization, a flexible 8-bit or 16-bit host interface, and support for fibre connections. The FHLI ordering code identifies the 64-LQFP, 10 mm by 10 mm package configuration. This package provides 64 pins for the integrated switch, host interface, clocks, power rails, and copper and fibre-related connections.
The device combines ordinary Ethernet frame switching with precision-network synchronization functions. IEEE 1588 support is important in industrial systems that need deterministic event timing across network nodes. The generic host interface can be tailored to an embedded processor or controller, while the multiple port options allow equipment designers to consolidate bridged network connections into one device.
Typical applications include industrial Ethernet bridges, embedded network controllers, factory automation equipment, test and measurement systems, and synchronized industrial communication equipment. Fibre support is particularly relevant when a copper-only interface cannot satisfy the distance, isolation, or topology requirements of the installation.
The main design consideration is the complete pin-assignment and reference-circuit review required for a 64-LQFP mixed-signal network device. Follow the manufacturer datasheet for the exact pin names, power rails, clock requirements, external component recommendations, and PCB layout guidance rather than inferring connections from a generic Ethernet-switch design.
This product page consolidates the manufacturer family information, package details, switching capabilities, synchronization features, application guidance, and verified sourcing links for engineers evaluating the KSZ8462FHLI.
के लिए ड्रॉप-इन विकल्प KSZ8462FHLI — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं KSZ8462FHLI (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Data Rate, Package.
KSZ8462FHL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8462HLI
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →KSZ8462HLI
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →KSZ8462FH
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8462F
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8462FHLI Maximum Ratings और Electrical Characteristics
| Product Type | 10/100 Mb/s Ethernet switch |
| Number of Ethernet Ports | 2 ports |
| डेटा दर | 10/100 Mb/s per port |
| Time Synchronization Support | IEEE 1588v2 |
| Host Interface | 8-bit or 16-bit generic bus |
| Fibre Support | Supported |
| Copper Interface | 10/100 Base-T/TX PHY interface |
| पैकेज | 64-LQFP (10 mm x 10 mm) |
| पिन काउंट | 64 pins |
| माउंटिंग प्रकार | Surface mount |
| Product Family | EtherSynch |
| Industrial Ethernet Application | Industrial Ethernet synchronization |
KSZ8462FHLI 64-lqfp (10 mm x 10 mm) पिन कॉन्फ़िगरेशन गाइड
KSZ8462FHLI (64-lqfp (10 mm x 10 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: KSZ8462FHLI.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
KSZ8462FHLI के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Synchronization, Embedded Ethernet Control, Factory Automation Gateways, Test and Measurement Equipment, Synchronized Process Control, Industrial Network Bridges.
Industrial Ethernet Synchronization
The KSZ8462FHLI fits industrial systems that require ordinary Ethernet switching alongside precise network timing. Its two 10/100 Mb/s ports provide connectivity between an embedded controller and an industrial network segment, while IEEE 1588v2 support addresses synchronization across participating nodes. The 8-bit or 16-bit generic host bus allows the switch to connect to a processor whose bus width differs from the switch configuration. This combination is useful when equipment must communicate over Ethernet while coordinating events, timestamps, or control schedules across several network participants.
Embedded Ethernet Control
The KSZ8462FHLI is appropriate for embedded equipment that needs a local Ethernet switch and processor-facing control logic on one device. Its two 10/100 Mb/s ports can connect an embedded host to an upstream network or another controller, and the selectable 8-bit or 16-bit general bus can accommodate different embedded architectures. Integration reduces the number of separate interface components, although the complete clock, power, magnetics, and fibre circuitry must be designed according to the manufacturer application guidance.
Factory Automation Gateways
A factory automation gateway can use the KSZ8462FHLI to combine network connectivity with deterministic timing support. The device bridges 10/100 Mb/s traffic while exposing an 8-bit or 16-bit host interface to the gateway controller. IEEE 1588v2 is particularly relevant when machines, sensors, controllers, or inspection equipment require timestamps and coordinated event handling. The device does not replace the gateway processor or Ethernet magnetics; rather, it provides the switching and synchronization subsystem that such a gateway needs.
Test and Measurement Equipment
The KSZ8462FHLI can support Ethernet-enabled test and measurement instruments that exchange commands and results while maintaining time relationships across a test system. Two 10/100 Mb/s ports permit a compact internal network arrangement, while IEEE 1588v2 support is useful for distributed measurement setups. The general-purpose host bus permits integration with a test-control processor. Designers should verify clock-jitter, latency, electrical, and environmental requirements against the specific instrument architecture before finalizing the implementation.
Synchronized Process Control
The KSZ8462FHLI is suited to process-control equipment that must monitor and actuate distributed processes with accurate timing relationships. Its IEEE 1588v2 capability supports synchronization across Ethernet-connected equipment, while the 10/100 Mb/s ports handle control and supervisory traffic. The 8-bit or 16-bit host interface provides access to a controller or embedded processor. Copper and fibre-support capabilities can help bridge different physical-layer needs, subject to the media requirements and external circuitry specified in the manufacturer documentation.
Industrial Network Bridges
The KSZ8462FHLI can serve as the switching element in a compact industrial Ethernet bridge that connects embedded subsystems to a wider network. Two 10/100 Mb/s ports support switched communication, and the generic host bus allows a local processor to access or manage traffic independently of a full external network interface stack. IEEE 1588v2 support adds value when the bridge participates in synchronized industrial networks. A production design must include the required magnetic-interface or fibre-media components, power conversion, clocking, and layout controls.
के लिए इंजीनियरिंग संदर्भ डेटा KSZ8462FHLI — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | Microchip Technology |
| Package | 64-LQFP (10 mm x 10 mm) |
| Ethernet Ports | 2 ports |
| Data Rate | 10/100 Mb/s |
| Host Interface | 8-bit or 16-bit generic bus |
| Synchronization | IEEE 1588v2 |
| Fibre Support | Supported |
| Copper PHY Interface | 10/100 Base-T/TX |
| Product Family | EtherSynch |
| Surface-Mount Package | Yes |
डिज़ाइन नोट्स
Use the manufacturer KSZ8462 reference layout and pin-description table as the authority for the 64-LQFP footprint, exposed-pad treatment, power distribution, and clock routing. Keep Ethernet and fibre-related high-frequency paths short, maintain continuous ground references, and avoid routing sensitive communication lines beneath switching or clock circuitry. Verify all 64 electrical connections and unused-pin requirements against the exact ordering code before releasing the PCB.
Treat Ethernet, host-bus, and synchronization paths as separate constraint groups. Maintain the clock topology, impedance, and timing margin specified by the manufacturer, and keep return paths continuous. Because IEEE 1588v2 performance depends on coherent timing across the network, do not substitute an arbitrary oscillator or clock-routing arrangement; validate jitter, skew, and synchronization behavior in the complete board design.
Design the power rails for both static demand and Ethernet switching activity, including the effects of magnetics, fibre-support circuitry, host-interface loading, and clock distribution. Follow the datasheet for supply sequencing, decoupling values, and permitted operating limits. Decoupling capacitors should be placed at the associated supply pins with short return paths, and rail noise should be checked under sustained 10/100 Mb/s traffic rather than only at a quiescent operating point.
Do not treat the 64-LQFP package alone as proof that another Ethernet switch is replaceable. The KSZ8462FHLI integrates a particular two-port 10/100 Mb/s architecture, generic 8-bit or 16-bit host bus, IEEE 1588v2 synchronization, and fibre-support features. A valid alternate must match all pin assignments and electrical functions, including clock, power, management, and media-related signals, and it must pass system-level interoperability testing.
अनुपालन जानकारी
No explicit compliance declaration for the exact ordering code was identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Microchip Technology before procurement.