Microchip Technology

KSZ8462FHLI - 2-Port 10/100 Ethernet Switch | Microchip

MPN: KSZ8462FHLI ✗ Akhir Hayat
64-LQFP (10 mm x 10 mm) Package
MOQ: 1 |

KSZ8462FHLI Ringkasan

The Microchip Technology KSZ8462FHLI is a two-port 10/100 Mb/s Ethernet switch with IEEE 1588v2 precision-time-protocol support, an 8-bit or 16-bit generic host bus interface, and fibre-support capability in a 64-LQFP package measuring 10 mm by 10 mm.

An Ethernet switch is a network-semiconductor device that receives frames from one or more ports and forwards them toward the appropriate destination port or connected host. The KSZ8462 belongs to the EtherSynch product line, a family of Ethernet switches designed for industrial communication and precise synchronization. Its general-purpose host interface gives an embedded processor access to network traffic while supporting both 8-bit and 16-bit bus configurations.

The principal features of the KSZ8462FHLI include two 10/100 Mb/s Ethernet ports, IEEE 1588v2-enabled synchronization, a flexible 8-bit or 16-bit host interface, and support for fibre connections. The FHLI ordering code identifies the 64-LQFP, 10 mm by 10 mm package configuration. This package provides 64 pins for the integrated switch, host interface, clocks, power rails, and copper and fibre-related connections.

The device combines ordinary Ethernet frame switching with precision-network synchronization functions. IEEE 1588 support is important in industrial systems that need deterministic event timing across network nodes. The generic host interface can be tailored to an embedded processor or controller, while the multiple port options allow equipment designers to consolidate bridged network connections into one device.

Typical applications include industrial Ethernet bridges, embedded network controllers, factory automation equipment, test and measurement systems, and synchronized industrial communication equipment. Fibre support is particularly relevant when a copper-only interface cannot satisfy the distance, isolation, or topology requirements of the installation.

The main design consideration is the complete pin-assignment and reference-circuit review required for a 64-LQFP mixed-signal network device. Follow the manufacturer datasheet for the exact pin names, power rails, clock requirements, external component recommendations, and PCB layout guidance rather than inferring connections from a generic Ethernet-switch design.

This product page consolidates the manufacturer family information, package details, switching capabilities, synchronization features, application guidance, and verified sourcing links for engineers evaluating the KSZ8462FHLI.

Pilihan pengganti yang segera untuk KSZ8462FHLI — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera KSZ8462FHLI (sama faktor bentuk dan kaki) — berbeza dalam Data Rate, Package.

Microchip Technology
Data Rate: 10/100 Mbps
Package: 64-LQFP (10 x 10 mm)
Bandingkan Dengan KSZ8462FHLI →

KSZ8462FHL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-LQFP (10 x 10 mm)
IEEE 1588v2 and three 10/100 Mb/s ports are retained; the ordering suffix differs by one code, changing at most one qualification or feature designation

📋 Alternatif rujukan (tidak dalam katalog)

KSZ8462HLI

✅ Masuk Drop-In
Microchip Technology
📦 64-LQFP (10 x 10 mm)
IEEE 1588v2-enabled Ethernet switch controller · 3 ports · 10/100 Mbps · 2 10BASE-T/100BASE-TX PHYs · 2 associated MAC units · 8-bit or 16-bit general bus interface · IEEE 1588v2 · EtherSynch

Hubungi untuk harga

Lihat Datasheet →

KSZ8462HLI

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 64-LQFP (10 x 10 mm)
IEEE 1588v2-enabled Ethernet switch controller · 3 ports · 10/100 Mbps · 2 10BASE-T/100BASE-TX PHYs · 2 associated MAC units · 8-bit or 16-bit general bus interface · IEEE 1588v2 · EtherSynch

Hubungi untuk harga

Lihat Datasheet →

KSZ8462FH

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-LQFP (10 x 10 mm)
IEEE 1588v2 and 10/100 Mb/s performance are retained; the ordering suffix differs by one code, affecting at most one configuration field

📋 Alternatif rujukan (tidak dalam katalog)

KSZ8462F

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-LQFP (10 x 10 mm)
IEEE 1588v2 and 10/100 Mb/s performance are retained; two suffix characters differ, with a potential change in one qualification or feature field

📋 Alternatif rujukan (tidak dalam katalog)

KSZ8462FHLI Penilaian maksimum & Ciri-ciri Elektrik

Product Type 10/100 Mb/s Ethernet switch
Number of Ethernet Ports 2 ports
Kadar Data 10/100 Mb/s per port
Time Synchronization Support IEEE 1588v2
Host Interface 8-bit or 16-bit generic bus
Fibre Support Supported
Copper Interface 10/100 Base-T/TX PHY interface
Kemasan 64-LQFP (10 mm x 10 mm)
Kiraan Pin 64 pins
Jenis Pemasangan Surface mount
Product Family EtherSynch
Industrial Ethernet Application Industrial Ethernet synchronization

Panduan Konfigurasi Pin KSZ8462FHLI 64-lqfp (10 mm x 10 mm)

Konfigurasi pin untuk KSZ8462FHLI (64-lqfp (10 mm x 10 mm) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 64-lqfp (10 mm x 10 mm) untuk KSZ8462FHLI

Tiada data garisan pin yang diperoleh untuk KSZ8462FHLI.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

KSZ8462FHLI patut untuk 6 aplikasis: Industrial Ethernet Synchronization, Embedded Ethernet Control, Factory Automation Gateways, Test and Measurement Equipment, Synchronized Process Control, Industrial Network Bridges.

🏭

Industrial Ethernet Synchronization

The KSZ8462FHLI fits industrial systems that require ordinary Ethernet switching alongside precise network timing. Its two 10/100 Mb/s ports provide connectivity between an embedded controller and an industrial network segment, while IEEE 1588v2 support addresses synchronization across participating nodes. The 8-bit or 16-bit generic host bus allows the switch to connect to a processor whose bus width differs from the switch configuration. This combination is useful when equipment must communicate over Ethernet while coordinating events, timestamps, or control schedules across several network participants.

🖥️

Embedded Ethernet Control

The KSZ8462FHLI is appropriate for embedded equipment that needs a local Ethernet switch and processor-facing control logic on one device. Its two 10/100 Mb/s ports can connect an embedded host to an upstream network or another controller, and the selectable 8-bit or 16-bit general bus can accommodate different embedded architectures. Integration reduces the number of separate interface components, although the complete clock, power, magnetics, and fibre circuitry must be designed according to the manufacturer application guidance.

🏭

Factory Automation Gateways

A factory automation gateway can use the KSZ8462FHLI to combine network connectivity with deterministic timing support. The device bridges 10/100 Mb/s traffic while exposing an 8-bit or 16-bit host interface to the gateway controller. IEEE 1588v2 is particularly relevant when machines, sensors, controllers, or inspection equipment require timestamps and coordinated event handling. The device does not replace the gateway processor or Ethernet magnetics; rather, it provides the switching and synchronization subsystem that such a gateway needs.

📺

Test and Measurement Equipment

The KSZ8462FHLI can support Ethernet-enabled test and measurement instruments that exchange commands and results while maintaining time relationships across a test system. Two 10/100 Mb/s ports permit a compact internal network arrangement, while IEEE 1588v2 support is useful for distributed measurement setups. The general-purpose host bus permits integration with a test-control processor. Designers should verify clock-jitter, latency, electrical, and environmental requirements against the specific instrument architecture before finalizing the implementation.

⚡

Synchronized Process Control

The KSZ8462FHLI is suited to process-control equipment that must monitor and actuate distributed processes with accurate timing relationships. Its IEEE 1588v2 capability supports synchronization across Ethernet-connected equipment, while the 10/100 Mb/s ports handle control and supervisory traffic. The 8-bit or 16-bit host interface provides access to a controller or embedded processor. Copper and fibre-support capabilities can help bridge different physical-layer needs, subject to the media requirements and external circuitry specified in the manufacturer documentation.

🌐

Industrial Network Bridges

The KSZ8462FHLI can serve as the switching element in a compact industrial Ethernet bridge that connects embedded subsystems to a wider network. Two 10/100 Mb/s ports support switched communication, and the generic host bus allows a local processor to access or manage traffic independently of a full external network interface stack. IEEE 1588v2 support adds value when the bridge participates in synchronized industrial networks. A production design must include the required magnetic-interface or fibre-media components, power conversion, clocking, and layout controls.

What is the KSZ8462FHLI?
The KSZ8462FHLI is a Microchip Technology two-port 10/100 Mb/s Ethernet switch with IEEE 1588v2 synchronization and an 8-bit or 16-bit generic host interface. According to the Microchip KSZ8462 product page, it belongs to the EtherSynch family for industrial Ethernet applications and is offered in a 64-LQFP package measuring 10 mm by 10 mm.
What are the key specifications of KSZ8462FHLI that engineers should know?
The KSZ8462FHLI combines two 10/100 Mb/s Ethernet ports, IEEE 1588v2 precision synchronization, an 8-bit or 16-bit generic host bus, and fibre-support capability. Its 64-LQFP package measures 10 mm by 10 mm. The manufacturer product page identifies the device as an EtherSynch Ethernet switch intended for industrial communication and synchronization.
Where can I download the KSZ8462FHLI datasheet PDF?
The official KSZ8462 product page is the primary starting point for the KSZ8462FHLI documentation and ordering information. Open the Microchip Technology KSZ8462 page and select the appropriate datasheet or document link. The KSZ8462FHLI data sheet covers its 64-LQFP pin assignment, electrical characteristics, host interface, Ethernet ports, and IEEE 1588v2 features.
Where can I find the KSZ8462FHLI pinout?
The KSZ8462FHLI pinout is found in the pin-description table of the manufacturer KSZ8462 datasheet. The device uses a 64-LQFP package, so verify all 64 pin numbers and their power, ground, clock, host-interface, Ethernet, and fibre-support assignments directly against that table before laying out or modifying a PCB.
Does the KSZ8462FHLI support IEEE 1588?
Yes, the KSZ8462FHLI supports IEEE 1588v2-enabled synchronization. According to the Microchip KSZ8462 product page, the EtherSynch product line provides integrated communications and synchronization for industrial Ethernet applications, making this device relevant to equipment requiring coordinated timing across Ethernet nodes.
What host interface does the KSZ8462FHLI use?
The KSZ8462FHLI uses a flexible 8-bit or 16-bit general-purpose host bus interface. The Microchip KSZ8462 product page explicitly identifies both interface widths, allowing the system designer to match the switch to an embedded processor or controller architecture. Signal mapping, timing, and electrical details must be taken from the device data sheet.
Can the KSZ8462FHLI be used for fibre connections?
Yes, the KSZ8462FHLI includes fibre-support capability in addition to its 10/100 Base-T/TX interface. The exact fibre implementation, required external components, supported optical or copper fibre-media configuration, and signal limits are defined in the manufacturer documentation rather than in the product-family summary alone.
Is the KSZ8462FHLI the same as the KSZ8462HLI?
No, KSZ8462FHLI and KSZ8462HLI are not confirmed as interchangeable drop-in parts. Both are listed in 64-LQFP packages, but the FHLI ordering code includes the manufacturer variant with fibre-support capability. Before substitution, compare the complete pin assignments, electrical limits, clocking, host-interface signals, and fibre-related functions in the manufacturer datasheets.
What is the best drop-in replacement for KSZ8462FHLI?
No drop-in replacement is confirmed by the available manufacturer and cross-reference information. A valid replacement must preserve the 64-LQFP pinout, 8-bit or 16-bit host interface, two 10/100 Mb/s ports, IEEE 1588v2 behavior, clocking, power rails, and fibre-support functions. Do not substitute solely because another switch uses the same package name.
When should I choose the KSZ8462FHLI over a generic Ethernet switch?
Choose the KSZ8462FHLI when an industrial Ethernet design requires more than frame forwarding: IEEE 1588v2 synchronization, a selectable 8-bit or 16-bit generic host bus, two 10/100 Mb/s ports, and fibre-support capability can all influence the decision. A generic switch may be adequate for ordinary networking, but it may not implement the required timing or host-integration features.
Is the KSZ8462FHLI suitable for industrial automation equipment?
The KSZ8462FHLI is suitable for industrial automation and synchronized industrial Ethernet applications. Its two 10/100 Mb/s ports, EtherSynch positioning, IEEE 1588v2 support, and flexible host interface support embedded network equipment. Final suitability still depends on environmental ratings, timing margins, fault requirements, and the complete electrical specifications.
Where can I buy the KSZ8462FHLI online?
Use the Request a Quote form on this page to request the KSZ8462FHLI, current commercial terms, available packaging, and lead time. The product is listed by Microchip Technology in a 64-LQFP package, but current stock, order quantity, and delivery timing should be confirmed when the quote is prepared.
What is the price of the KSZ8462FHLI?
Submit the KSZ8462FHLI part number through the Request a Quote form on this page for the current price and quantity break. Commercial pricing can vary with order quantity, package or tray configuration, supply status, and market conditions, so the form provides the appropriate quote tied to the requested configuration.
What is the lead time for the KSZ8462FHLI?
Request the current KSZ8462FHLI lead time through the Request a Quote form on this page. Lead time can depend on manufacturer inventory, the selected order quantity, and whether the order is placed as a tray or another permitted shipping configuration. Confirm the promised delivery schedule before committing the production schedule.
Is the KSZ8462FHLI in stock?
Current KSZ8462FHLI availability is obtained through the Request a Quote form on this page. The manufacturer product page identifies the device as part of the KSZ8462 EtherSynch family, while live inventory and order allocation can change. Include your required quantity and packaging preference with the quote request.
What is a Microchip equivalent for the KSZ8462FHLI?
The closest identified Microchip family member is the KSZ8462, whose product page covers the EtherSynch Ethernet switch platform containing the FHLI configuration. A specific Microchip cross-reference must still be checked for exact pin, electrical, timing, host-interface, and fibre-support equivalence before it can be treated as a drop-in replacement.

Data referensi kejuruteraan untuk KSZ8462FHLI — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the KSZ8462FHLI when the design needs more than a conventional Ethernet switch: two 10/100 Mb/s ports, IEEE 1588v2 synchronization, a flexible 8-bit or 16-bit generic host bus, and fibre-support capability. It is especially relevant to industrial automation, embedded control, synchronized process equipment, and compact test systems. The package alone is not a substitution criterion, and no confirmed drop-in replacement is established. If designing a new board, review the complete manufacturer datasheet for power, clocks, pin assignments, Ethernet physical-layer components, fibre-media requirements, and layout constraints. If evaluating an existing 64-LQFP Ethernet-switch design, treat KSZ8462HLI only as a related family member until its exact pin and functional differences are validated. Commercial availability, lifecycle status, temperature grade, compliance declarations, and electrical limits should also be confirmed before production commitment.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Microchip Technology
Package 64-LQFP (10 mm x 10 mm)
Ethernet Ports 2 ports
Data Rate 10/100 Mb/s
Host Interface 8-bit or 16-bit generic bus
Synchronization IEEE 1588v2
Fibre Support Supported
Copper PHY Interface 10/100 Base-T/TX
Product Family EtherSynch
Surface-Mount Package Yes

Catatan Desain

Use the manufacturer KSZ8462 reference layout and pin-description table as the authority for the 64-LQFP footprint, exposed-pad treatment, power distribution, and clock routing. Keep Ethernet and fibre-related high-frequency paths short, maintain continuous ground references, and avoid routing sensitive communication lines beneath switching or clock circuitry. Verify all 64 electrical connections and unused-pin requirements against the exact ordering code before releasing the PCB.

Treat Ethernet, host-bus, and synchronization paths as separate constraint groups. Maintain the clock topology, impedance, and timing margin specified by the manufacturer, and keep return paths continuous. Because IEEE 1588v2 performance depends on coherent timing across the network, do not substitute an arbitrary oscillator or clock-routing arrangement; validate jitter, skew, and synchronization behavior in the complete board design.

Design the power rails for both static demand and Ethernet switching activity, including the effects of magnetics, fibre-support circuitry, host-interface loading, and clock distribution. Follow the datasheet for supply sequencing, decoupling values, and permitted operating limits. Decoupling capacitors should be placed at the associated supply pins with short return paths, and rail noise should be checked under sustained 10/100 Mb/s traffic rather than only at a quiescent operating point.

Do not treat the 64-LQFP package alone as proof that another Ethernet switch is replaceable. The KSZ8462FHLI integrates a particular two-port 10/100 Mb/s architecture, generic 8-bit or 16-bit host bus, IEEE 1588v2 synchronization, and fibre-support features. A valid alternate must match all pin assignments and electrical functions, including clock, power, management, and media-related signals, and it must pass system-level interoperability testing.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit compliance declaration for the exact ordering code was identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Microchip Technology before procurement.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

KSZ8462FHLI datasheet KSZ8462FHLI pinout KSZ8462FHLI datasheet pdf KSZ8462FHLI 64-LQFP KSZ8462FHLI IEEE 1588 KSZ8462FHLI host interface KSZ8462FHLI equivalent KSZ8462FHLI replacement KSZ8462FHLI cross reference KSZ8462FHLI price KSZ8462FHLI stock Microchip Technology KSZ8462FHLI KSZ8462FHLI application circuit KSZ8462FHLI footprint

Komponen dan Tanda berkaitan

Microchip Technology KSZ8462FHLI KSZ8462HLI KSZ8462 EtherSynch Ethernet switch network interface controller industrial Ethernet IEEE 1588v2 Precision Time Protocol 10/100 Mb/s Ethernet 10/100 Base-T/TX PHY generic host interface 8-bit host bus 16-bit host bus fibre support 64-LQFP LQFP package family surface-mount package SMD industrial automation factory automation process control time synchronization Ethernet controller
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ