onsemi

LM224DR2G - 4-Channel 3-32V Op Amp | onsemi

MPN: LM224DR2G ✓ सक्रिय
3 V to 32 V Vdss Low power Id 14-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

LM224DR2G अवलोकन

The onsemi LM224DR2G is a four-channel general-purpose operational amplifier rated for single-supply operation from 3 V to 32 V, with a gain-bandwidth product of 1 MHz and a slew rate of 0.6 V/us, housed in a 14-pin SOIC package. The four amplifiers can operate from a common supply, making the device suitable for compact analog signal-processing systems that require several independent amplifier channels.

A general-purpose operational amplifier is a voltage-amplified, high-gain active device commonly used for signal conditioning, buffering, comparisons, instrumentation, and closed-loop feedback control. Within the semiconductor hierarchy, an operational amplifier belongs to the amplifier IC and analog signal-processing categories. It provides a practical combination of high open-loop gain, differential input capability, and output-voltage swing, allowing simple external feedback networks to define the closed-loop behavior.

The LM224 series provides four true differential-input amplifiers in one package. Its stated 1 MHz gain-bandwidth product supports general-purpose signal amplification at low and moderate frequencies, while the 0.6 V/us slew rate governs large-signal response. Operation from 3 V to 32 V covers both low-voltage circuits and conventional industrial supply levels. The Mouser listing identifies the LM224DR2G as a low-power quad operational amplifier with a -25°C to 85°C temperature range.

Because each amplifier shares the same package and supply rails, designers can reduce component count and board area in applications requiring several similar channels. The 14-pin SOIC format also supports conventional surface-mount assembly and is compatible with automated inspection and pick-and-place processes. True differential inputs allow each channel to accept signals referenced to the circuit ground without requiring a separate input common-mode arrangement for every channel.

Typical uses include four-channel sensor conditioning, general-purpose signal buffering, instrumentation interfaces, industrial control signal paths, and low-frequency analog measurement systems. Four matched functional channels can simplify a design that needs to process or monitor several related signals. The device is most appropriate when moderate bandwidth, straightforward feedback networks, and wide supply-voltage flexibility matter more than very high speed or very low offset voltage.

Design the bypass capacitance and input network to limit parasitic coupling between adjacent channels. Keep sensitive input traces short, place the supply-bypass capacitor close to the positive and ground pins, and maintain signal returns away from switching nodes. Verify common-mode and output-swing limits against the selected 3 V to 32 V supply before using the amplifier near a rail, because those operating limits determine whether a particular feedback configuration remains linear.

This page combines the manufacturer-family characteristics with package, supply, temperature, frequency, and sourcing information, and adds practical channel-level design guidance for evaluating the LM224DR2G in industrial and instrumentation applications.

के लिए ड्रॉप-इन विकल्प LM224DR2G — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM224DR2G (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, AEC-Q100 Qualification, Input Type, Number of Channels, Operating Temperature Range.

Texas Instruments
Package: 14-SOIC
AEC-Q100 Qualification: unknown
इसके साथ तुलना करें LM224DR2G →
onsemi
Package: 14-SOIC
AEC-Q100 Qualification: Not applicable
Input Type: Differential input
इसके साथ तुलना करें LM224DR2G →

LM224DR

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin SOIC
Standard general-purpose operational amplifier · 4 circuits · 14-SOIC · Surface mount

✓ स्टॉक में

$0.1641 / यूनिट

डेटाशीट देखें →

LM224DRG4

✅ ड्रॉप-इन
📦 14-pin SOIC
Identical LM224 family and 14-pin SOIC implementation; the listed gain-bandwidth product, slew rate, and supply range remain 1 MHz, 0.6 V/us, and 3 V to 32 V, giving a 0% difference in the stated key ratings.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LM124DR

✅ ड्रॉप-इन
📦 14-pin SOIC
The listed gain-bandwidth product is 1.2 MHz versus 1 MHz, a 20% increase, while both devices use a 14-pin SOIC quad-amplifier package.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LM224DR2G Maximum Ratings और Electrical Characteristics

Amplifier Type General-purpose operational amplifier
Number of Channels 4 circuits
Number of Amplifiers 4 amplifiers
Supply Voltage Range 3 V to 32 V
Gain-Bandwidth Product 1 MHz
Slew Rate 0.6 V/us
Input Type True differential inputs
ऑपरेटिंग तापमान रेंज -25°C to 85°C
पैकेज 14-pin SOIC
माउंटिंग प्रकार Surface mount
Quiescent Current Class Low power
Single-Supply Operation 3 V minimum single-supply operation
Maximum Supply Voltage 32 V
Channel Architecture Quad channel
Product Classification Instrumentation, operational amplifiers, buffer amplifiers

LM224DR2G 14-pin soic पिन कॉन्फ़िगरेशन गाइड

LM224DR2G (14-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

LM224DR2G के लिए 14-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LM224DR2G.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LM224DR2G के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Signal Conditioning, Four-Channel Buffering, Instrumentation Amplifier Front End, Low-Frequency Communication Interface, Power and Battery Monitoring, Analog Control and Threshold Conditioning.

🏭

Industrial Sensor Signal Conditioning

The LM224DR2G fits industrial sensor-conditioning front ends that amplify several low-frequency analog signals with one package. Its four true differential-input channels can each process a transducer output while sharing a 3 V to 32 V supply, reducing component count compared with four separate single amplifiers. The 1 MHz gain-bandwidth product is appropriate for many resistive sensors, position sensors, and process-control signals that do not require wideband amplification. The principal design consideration is common-mode range: verify that the sensor voltage remains within the amplifier’s operating limits at the selected supply voltage. Keep sensor traces away from switching nodes and use a quiet ground reference to prevent injected current from becoming amplified signal error.

🔧

Four-Channel Buffering

The LM224DR2G is useful where four low-frequency signals must be buffered before reaching an ADC, logic device, or downstream measurement circuit. Its four amplifiers provide independent unity-gain follower or modest-gain channels in one 14-pin SOIC, while the 0.6 V/us slew rate is suitable for signals that do not require high-speed transitions. A 1 MHz gain-bandwidth product also supports gain settings through the standard inverting and non-inverting feedback networks. Check output-voltage headroom at the chosen supply and avoid operating the output close to a rail when large signal swings are expected. Place the bypass capacitor at the supply pins and route each buffered signal away from the unused high-impedance inputs.

📊

Instrumentation Amplifier Front End

The LM224DR2G can form the active portions of a four-channel instrumentation front end when the required bandwidth is moderate. True differential inputs support balanced sensor signals, and the common 3 V to 32 V supply range accommodates both portable and industrial systems. With a 1 MHz gain-bandwidth product, each channel can provide useful closed-loop gain while retaining sufficient bandwidth for slow pressure, temperature, strain, and position measurements. The tradeoff is that the LM224 is a general-purpose amplifier rather than a dedicated low-offset instrumentation amplifier, so resistor matching and input bias behavior may limit accuracy. Use high-value matched feedback networks where practical and verify offset, bias-current, and common-mode requirements against the manufacturer electrical-characteristics table.

🌐

Low-Frequency Communication Interface

The LM224DR2G can amplify slow communication, control, or interface signals in equipment that does not require GHz-class bandwidth. Its 1 MHz gain-bandwidth product is appropriate for baseband waveform conditioning, receive-buffer tasks, and modest-frequency analog filtering stages. The 0.6 V/us slew rate provides a defined limit for larger voltage transitions, while four channels allow separate transmit, receive, threshold, or monitoring functions on one package. Designers should keep the closed-loop gain low enough to avoid bandwidth reduction around noise-gain peaks and should provide stable feedback components close to the device. Decouple the supply locally and use controlled return paths to prevent digital switching activity from coupling into the analog input nodes.

⚡

Power and Battery Monitoring

The LM224DR2G can monitor several slowly changing voltages in power-supply or battery-management circuitry because it accepts a 3 V to 32 V supply and includes true differential inputs. A practical arrangement can amplify sensed voltage-difference, output-voltage, and load-current signals for comparison or conversion by downstream circuitry. Its four-channel package reduces the number of separate amplifiers required for multi-point monitoring. The device is not intended for high-side current measurement at high bandwidth, so a suitable current-sense amplifier may be needed where precision current measurement is required. Confirm the common-mode voltage at every monitored node, maintain adequate output headroom, and use short, shielded routing for high-impedance sensing lines.

🖥️

Analog Control and Threshold Conditioning

The LM224DR2G supports general analog control tasks such as error amplification, threshold shaping, and slow closed-loop feedback around a power converter. Its true differential inputs are helpful when the error signal is referenced to another node rather than ground, and the 3 V minimum operating voltage supports low-voltage control systems. With four channels, designers can combine voltage feedback, current feedback, soft-start conditioning, and monitoring functions. The 0.6 V/us slew rate is adequate for many control loops but can become a limiting factor when fast compensation is required. Verify loop stability with the actual feedback network, keep compensation components close to the relevant pins, and avoid routing the compensation node through long traces susceptible to coupling.

What is the onsemi LM224DR2G?
The onsemi LM224DR2G is a four-channel general-purpose operational amplifier in a 14-pin SOIC package. According to the onsemi LM224 family datasheet listing, the device has true differential inputs, operates from 3 V to 32 V, and is intended for general-purpose single-supply analog signal-processing applications. Each of its four amplifier channels can be configured independently with external resistors.
What are the key specifications of LM224DR2G?
The LM224DR2G provides four amplifier channels, a 1 MHz gain-bandwidth product, and a 0.6 V/us slew rate in a 14-pin SOIC. According to the onsemi datasheet listing, its supply-voltage range is 3 V to 32 V and its operating-temperature range is -25°C to 85°C. The device also features true differential inputs and is classified as a low-power, general-purpose amplifier.
Where can I download the LM224DR2G datasheet PDF?
The LM224DR2G datasheet PDF is available through the onsemi LM224DR2G document listing linked on this page. The manufacturer document describes the LM224 series as single-supply quad operational amplifiers with true differential inputs. It also provides the family information needed for supply range, frequency response, electrical characteristics, package details, and application guidance.
Where can I find the LM224DR2G pinout?
The LM224DR2G uses a 14-pin SOIC, and its pin assignments are shown in the onsemi LM224 family datasheet. Use the package drawing and pin-description table when assigning input, output, positive-supply, and negative-supply connections. Keep the exact pin numbering from the datasheet because orientation errors can short the supply rail or connect an amplifier output incorrectly.
Is LM224DR2G suitable for single-supply operation?
Yes, the LM224DR2G supports single-supply operation from 3 V to 32 V. According to the onsemi datasheet description, the LM224 series was designed with advantages for standard operational-amplifier use in single-supply systems. The common supply connects to every amplifier channel, while the true differential inputs support grounded sensor and signal-conditioning circuits.
Can LM224DR2G replace LM324ADR?
The LM224DR2G and LM324ADR are both general-purpose quad amplifiers offered in 14-pin SOIC packages, but replacement suitability depends on the complete electrical requirements of the original circuit. According to the manufacturer-family information, the LM224DR2G operates from 3 V to 32 V with a 1 MHz gain-bandwidth product. Confirm input offset, input bias current, output swing, supply behavior, and temperature limits before approving the substitution.
What is the difference between LM224DR2G and LM124DR?
The LM224DR2G has a stated gain-bandwidth product of 1 MHz, while the LM124DR comparison information states 1.2 MHz for the TI LM124DR. Both are 14-pin SOIC quad operational amplifiers, but the LM124DR offers 20% more listed gain-bandwidth product. This makes the LM224DR2G the more conservative choice when its lower bandwidth is adequate, while the LM124DR may be preferable where the additional bandwidth is beneficial.
When should I choose LM224DR2G over a higher-speed quad op amp?
Choose the LM224DR2G when a 1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 3 V to 32 V supply capability meet the circuit requirements. According to the onsemi family description, the device provides four true differential-input channels in one SOIC-14 package. It is a practical choice for low-frequency buffering, general-purpose conditioning, and multi-channel instrumentation rather than high-speed signal chains.
What is the best drop-in replacement for LM224DR2G?
The closest documented drop-in candidates are the onsemi LM224DR and onsemi LM224DRG4, which retain the LM224 family and 14-pin SOIC implementation. The TI LM124DR is another 14-pin quad-amplifier candidate with a listed 1.2 MHz gain-bandwidth product. Because the source information does not establish every electrical limit for each candidate, verify supply range, offset voltage, bias current, output swing, and temperature grade against the LM224DR2G datasheet.
Can LM224DR2G be used for industrial sensor conditioning?
Yes, the LM224DR2G can serve as a general-purpose front-end amplifier for low-frequency industrial sensor signals when the input and output remain within its operating limits. Its four channels allow several conditioning paths to share one package, while the 3 V to 32 V supply range supports low-voltage and industrial systems. Use the manufacturer datasheet to check input common-mode range and output swing at the actual supply voltage.
How should LM224DR2G channels be laid out on a PCB?
Place the supply-bypass capacitor close to the positive-supply and ground pins, and keep each input and feedback path short to minimize parasitic coupling. The onsemi LM224 family is a general-purpose quad amplifier, so sensitive inputs should be separated from switching-node traces and high-current return paths. Maintain a continuous ground reference and follow the datasheet layout guidance for the 14-pin SOIC footprint.
Where can I buy LM224DR2G and check current lead time?
Use the Request a Quote form on this page to request the current LM224DR2G price, stock position, lead time, and order quantity. The manufacturer and distributor listings identify the exact 14-pin SOIC part, but quotations and availability can change. Request the package and quantity in the inquiry so the returned proposal refers to LM224DR2G rather than a related LM224 family member.
What is the price of LM224DR2G?
Current LM224DR2G pricing depends on order quantity, supply status, and requested delivery terms. Use the Request a Quote form on this page for a current unit price and quantity schedule. The part is an onsemi four-channel, 14-pin SOIC operational amplifier rated for 3 V to 32 V operation, so include the exact MPN when requesting a quotation.
Is LM224DR2G in stock?
Current stock for LM224DR2G should be confirmed through the Request a Quote form on this page because inventory changes by package quantity and supplier channel. The verified distributor listings identify the exact onsemi LM224DR2G in a 14-pin SOIC package. Requesting a quotation for the required quantity provides a current allocation and delivery response for that MPN.
What can replace LM224DR2G?
The documented replacement path starts with the onsemi LM224DR and LM224DRG4, which preserve the LM224 family and 14-pin SOIC footprint. The TI LM124DR offers a closely related 14-pin quad-amplifier configuration with a listed 1.2 MHz gain-bandwidth product. Treat these as engineering candidates until supply limits, offset, bias current, output swing, noise, and temperature specifications have been checked against the original circuit.

के लिए इंजीनियरिंग संदर्भ डेटा LM224DR2G — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LM224DR2G when a low-cost, general-purpose quad amplifier with true differential inputs, a 1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 3 V to 32 V single-supply operation fits the design. Select LM224DR or LM224DRG4 when an onsemi LM224-family source is preferred and the exact orderable grade remains acceptable. Consider LM124DR when its listed 1.2 MHz gain-bandwidth product provides useful bandwidth margin, but verify the remaining electrical characteristics and supply limits before treating it as a drop-in replacement. For designs requiring lower offset, lower noise, faster response, or wider temperature operation, use a different amplifier family after a complete comparison. A package match alone is not enough: verify input common-mode range, output swing, bias current, offset voltage, supply current, and stability with the actual feedback network.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LM224DR LM224DRG4 LM124DR
Brand onsemi onsemi onsemi Texas Instruments
Package 14-pin SOIC 14-pin SOIC - same 14-pin SOIC - same 14-pin SOIC - same
Number of Amplifiers 4 4 4 4
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz 1.2 MHz

मुख्य विशेषताएँ

  • Wide single-supply operating range (बनामLM124DR)
  • Four integrated general-purpose channels (बनामLM2904PWR)
  • Defined general-purpose bandwidth and slew rate (बनामLM124DR)

डिज़ाइन नोट्स

Place the supply-bypass capacitor immediately adjacent to the positive-supply and ground pins, and connect the input and output pins of each channel directly to their feedback components. For a 14-pin SOIC, keep sensitive non-inverting inputs short and away from adjacent output pins. These measures reduce parasitic feedback and coupling between the four amplifier channels, particularly when several channels amplify small sensor signals simultaneously.

Do not assume that a common 14-pin SOIC footprint guarantees identical electrical behavior between amplifier families. Before substituting LM124DR for LM224DR2G, compare input offset voltage, input bias current, common-mode range, output swing, supply current, noise, and temperature limits using the manufacturer data. Also confirm that the feedback values do not create an unstable closed-loop response with the alternate part’s gain-bandwidth and slew-rate characteristics.

Keep the unused inputs of each amplifier in a defined, low-impedance state consistent with the datasheet guidance rather than allowing them to float. Route high-impedance inputs away from clock, relay, motor, and power-converter switching traces. Use a continuous ground plane and a single-point connection strategy for external sensor returns where appropriate, reducing the ground-potential differences that can otherwise appear as input errors in low-level instrumentation circuits.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact LM224DR2G orderable part. The LM224 is an analog integrated circuit and is not an AEC-Q100-qualified automotive device.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LM224DR2G datasheet LM224DR2G pinout LM224DR2G datasheet pdf LM224DR2G specifications LM224DR2G equivalent LM224DR2G replacement LM224DR2G cross reference LM224DR2G vs LM124DR LM224DR2G footprint LM224DR2G spice model LM224DR2G price LM224DR2G stock onsemi LM224DR2G LM224 14-SOIC quad op amp LM224DR2G industrial sensor conditioning

संबंधित कंपोनेंट्स और शब्द

onsemi LM224DR2G LM224DR LM224DRG4 LM124DR LM324ADR LM2904PWR operational amplifier general-purpose amplifier quad amplifier true differential input single-supply operation gain-bandwidth product slew rate input common-mode range output voltage swing closed-loop feedback signal conditioning instrumentation industrial control 14-pin SOIC SOIC package family surface-mount technology RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें