Texas Instruments

LM239DRG3 - Quad Differential Comparator | Texas Instruments

MPN: LM239DRG3 ✓ सक्रिय
2 V to 30 V Vdss 0.25 µA at 5 V Id 14-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

LM239DRG3 अवलोकन

Texas Instruments LM239DRG3 is a quad differential comparator containing four independent voltage comparators in a 14-pin SOIC package. The device operates from a single supply of 2 V to 30 V or from dual supplies of ±1 V to ±15 V. Each comparator provides an open-collector output, allowing pull-up resistors to set the output logic level and support wired-interface or level-shifting arrangements.

A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state when the voltage at the noninverting input rises above the voltage at the inverting input. The LM239 family combines four independent channels with a common power connection, making it suitable for level detection, threshold switching, sensor interfacing, industrial control, and signal conditioning within the wider semiconductor and analog IC hierarchy.

The quad architecture reduces package count and simplifies multi-channel designs. According to the Texas Instruments LM239 product information, the LM239 is a commercial-grade quad differential comparator. Open-collector outputs require an external pull-up network, but this gives engineers flexibility to choose the pull-up voltage independently from the comparator supply and to interface directly with open-collector buses.

Key electrical characteristics include a typical input bias current of 0.25 µA at a 5 V supply and a maximum input offset voltage of 5 mV at a 30 V supply. The family is designed for operation from a single supply over a wide voltage range, while dual-supply operation is possible when the total voltage between the two supplies remains within the device limits and the supply magnitude meets the minimum operating requirement.

Typical uses include monitoring a control voltage against a reference, detecting overvoltage or undervoltage conditions, converting sensor outputs into logic-level events, and driving industrial or automotive-style input modules. The four channels can also be used as window comparators when two channels are configured for upper and lower thresholds.

Designers should account for the open-collector output architecture and place the required pull-up resistor close to the output. Input common-mode range, output saturation voltage, supply ripple, and the timing of external pull-up components should be checked against the system thresholds. The manufacturer pin-description table should be used when assigning PCB tracks and verifying the 14-pin SOIC footprint.

This product page combines the family-level electrical characteristics, package and ordering information, same-footprint alternatives, comparison parameters, and practical comparator-layout guidance. It is intended to help engineers identify whether the LM239DRG3 fits a specific analog-interface design before finalizing the schematic and PCB layout.

के लिए ड्रॉप-इन विकल्प LM239DRG3 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM239DRG3 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Comparator Type, Output Type, Package, Common-Mode Input Range, Number of Channels.

Texas Instruments
Comparator Type: Quad precision differential voltage comparator
Output Type: Open-collector
Common-Mode Input Range: Includes ground
इसके साथ तुलना करें LM239DRG3 →
Texas Instruments
Comparator Type: General Purpose
Output Type: Open-Collector
Package: SOIC-14
इसके साथ तुलना करें LM239DRG3 →
Texas Instruments
Comparator Type: General-purpose differential comparator
Common-Mode Input Range: Includes ground
इसके साथ तुलना करें LM239DRG3 →

LM239DG

✅ ड्रॉप-इन
onsemi
📦 14-pin SOIC
General-purpose differential comparator · 4 comparators · 3 V to 36 V · -18 V to +18 V · Open collector with CMOS, open-collector, and TTL compatibility · 130 mV at 4 mA · 25 nA · +/-5 nA

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM239DR

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin SOIC
Quad precision differential voltage comparator · 4 independent channels · ±15 V or 30 V · Open-collector · 25 nA typical · ±5.0 nA typical · 2 mV maximum for LM239A family variants; LM239DR-specific value not supplied · 1.3 µs typical

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM239DT

✅ ड्रॉप-इन
STMicroelectronics
📦 14-pin SOIC
4 independent precision voltage comparators · 4 channels · Single supply or split supply · Open collector

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM339DR

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin SOIC
4 (Quad) · General Purpose · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 5 mV · 25 nA · 5 nA

✓ स्टॉक में

$0.0738 / यूनिट

डेटाशीट देखें →

LM339DRG4

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin SOIC
General-purpose differential comparator · 4 channels · Open collector · Single supply or dual supply · 30 V · ±38 V · 38 V · 0.37 mV

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM239DRG3 Maximum Ratings और Electrical Characteristics

Comparator Type Quad differential comparator
Number of Channels 4 channels
आउटपुट प्रकार Open collector
Single-Supply Voltage Range 2 V to 30 V
Dual-Supply Voltage Range -15 V to +15 V
Minimum Total Supply Span 2 V
Maximum Total Supply Span 36 V
Minimum VCC 1.5 V
Typical Input Bias Current 0.25 µA at 5 V
Maximum Input Offset Voltage 5 mV at 30 V
Typical Response Time 0.3 µs
पैकेज 14-pin SOIC
Package Width 3.90 mm
Package Body Span 0.154 inch
माउंटिंग प्रकार Surface mount
Shipping Package Tape and reel
Qualification Commercial grade

LM239DRG3 पिन कॉन्फ़िगरेशन

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
पिन 1 OUT 1 — Open-collector output for comparator 1
पिन 2 IN 1- — Inverting input for comparator 1
पिन 3 IN 1+ — Noninverting input for comparator 1
पिन 4 GND — Ground connection
पिन 5 IN 2+ — Noninverting input for comparator 2
पिन 6 IN 2- — Inverting input for comparator 2
पिन 7 OUT 2 — Open-collector output for comparator 2
पिन 8 OUT 3 — Open-collector output for comparator 3
पिन 9 IN 3- — Inverting input for comparator 3
पिन 10 IN 3+ — Noninverting input for comparator 3
पिन 11 GND — Ground connection
पिन 12 IN 4+ — Noninverting input for comparator 4
पिन 13 IN 4- — Inverting input for comparator 4
पिन 14 OUT 4 — Open-collector output for comparator 4

सामान्य अनुप्रयोग

LM239DRG3 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Threshold Detection, Power-Supply Overvoltage Monitor, Sensor Interface and Conditioning, Window Comparator, Relay and Actuator Interfacing, Battery and Portable Equipment Control.

🏭

Industrial Threshold Detection

The Texas Instruments LM239DRG3 is well suited to monitoring multiple control voltages in a 24 V industrial signal-conditioning board because its LM239 family supports a single supply up to 30 V. Four independent differential channels can each compare a field-level input with a reference generated by a resistor network. The open-collector output can sink current directly or drive a pull-up rail when a fault or limit is detected. Use the device only when the compared signal remains inside the specified input common-mode range. Add clamping and filtering for inductive or noisy industrial wiring, and select the external pull-up resistor to match the required logic level and output timing.

⚡

Power-Supply Overvoltage Monitor

The LM239DRG3 can supervise one or more power rails because each comparator evaluates a divided feedback voltage against a precision reference. Its quad organization allows a single 14-pin SOIC to monitor combinations of overvoltage, undervoltage, and enable conditions. The stated 2 V to 30 V single-supply range accommodates a 24 V control rail, while the 36 V maximum total supply span provides headroom when transient protection is included. Because the output is open collector, a fault signal can remain electrically isolated until a pull-up is added. The design must verify the input common-mode limits and account for the 5 mV maximum offset at a 30 V supply when setting a narrow threshold.

🧩

Sensor Interface and Conditioning

The LM239DRG3 can convert a slowly changing sensor signal into a logic-compatible event by comparing the sensor voltage with an adjustable reference. This arrangement is useful for thermistors, resistive sensors, and simple analog sensor networks where a dedicated comparator is unnecessary. The typical 0.25 µA input bias current at 5 V helps reduce loading of high-impedance sensing networks, while the 0.3 µs response time supports responsive threshold switching. Place the divider close to the relevant input, keep the reference node away from switching-node copper, and use the open-collector pull-up to establish the logic-high voltage. Verify that sensor and reference voltages remain within the usable common-mode range.

📊

Window Comparator

Two LM239DRG3 channels can be configured as upper and lower threshold detectors to create a window comparator for temperature, voltage, or current-derived signals. One channel asserts when the monitored signal crosses the upper limit, while another asserts when it crosses the lower limit. Their open-collector outputs can be tied through separate pull-up paths to produce a valid-window indication or an out-of-range alarm. The quad package still leaves two channels available for additional functions. Use matched resistor networks to reduce threshold drift and place the pull-up resistors near the SOIC outputs. Confirm hysteresis behavior and output timing in the implemented circuit, especially when the monitored signal changes rapidly.

🔧

Relay and Actuator Interfacing

The open-collector outputs of the LM239DRG3 are useful for driving transistor stages that operate relays, solenoid drivers, or other actuators in industrial equipment. Each comparator can produce an active-low control event, and the external pull-up determines the logic-high level rather than tying it directly to the comparator supply. This flexibility allows one device to interface with a transistor logic gate or wired-control module. Use resistors or diodes to limit base or gate current and to suppress inductive transients at the actuator. The LM239DRG3 itself is not the power switch, so its output current and voltage limits must remain within the transistor interface ratings.

📱

Battery and Portable Equipment Control

In portable or battery-powered equipment, the LM239DRG3 can implement low-voltage battery monitoring when its supply and input voltages remain within the LM239 operating limits. Four channels can track battery presence, charger state, or multiple threshold points, while the open-collector outputs can be pulled up to a low-energy rail. Low input bias current is beneficial when monitoring high-impedance divider networks, and the compact 14-pin SOIC supports four functions in one package. The actual battery chemistry, operating temperature, and minimum operating voltage must be checked carefully. A regulator or supervisor may be preferable when the rail can fall below the comparator’s 2 V minimum operating condition.

What is the LM239DRG3?
The LM239DRG3 is a Texas Instruments quad differential comparator with four independent comparator channels and open-collector outputs in a 14-pin SOIC package. According to the Texas Instruments LM239 product page, it is a commercial-grade comparator designed to operate from a single 2 V to 30 V supply or from dual supplies of ±1 V to ±15 V. The open-collector architecture requires external pull-up resistors and provides flexible output-level interfacing.
What is the operating voltage range of LM239DRG3?
The LM239DRG3 operates from 2 V to 30 V on a single supply and from ±1 V to ±15 V on dual supplies. The LMx39x and LM2901xx family information specifies a permitted difference between the two supply rails of 2 V to 36 V and requires VCC to be at least 1.5 V. This wide operating range supports both low-voltage electronics and conventional industrial control rails.
Where can I download the LM239DRG3 datasheet PDF?
The official LM239DRG3 documentation is available through the Texas Instruments LM239 product page at https://www.ti.com/product/LM239. That page provides the manufacturer’s family documentation, ordering information, parameters, and support resources. When downloading a third-party mirror, verify that it reproduces the Texas Instruments document for LM239, LM239B, LM339, LM339B, LM139, LM2901, and LM2901B rather than a document for an unrelated comparator.
Where can I find the LM239DRG3 pinout?
The LM239DRG3 pinout is documented in the pin-description table of the Texas Instruments LM239 family datasheet. The 14-pin SOIC contains four open-collector outputs, eight comparator inputs, one ground connection, and one supply connection. Use the manufacturer pin-description table when assigning tracks because incorrect output or input ordering can connect one comparator channel to another channel’s reference input.
What are the key specifications of LM239DRG3 that engineers should know?
The key LM239DRG3 specifications are four independent differential comparator channels, open-collector outputs, a 14-pin SOIC package, and a 2 V to 30 V single-supply operating range. The family data also lists a typical response time of 0.3 µs, typical input bias current of 0.25 µA at 5 V, and maximum input offset voltage of 5 mV at 30 V. These parameters determine threshold accuracy, switching speed, and required pull-up implementation.
What can replace the LM239DRG3?
The closest same-footprint choices identified for the LM239DRG3 include LM239DG, LM239DR, LM239DT, LM339DR, and LM339DRG4 in 14-pin SOIC packages. Their suitability depends on required temperature grade, supply limits, offset limits, and exact ordering code. Treat the family variants as qualified substitutes only after comparing the manufacturer data for electrical limits, pin assignments, and operating-temperature requirements.
Is LM239DRG3 the same as LM239DR?
The LM239DRG3 and LM239DR are both identified with Texas Instruments 14-pin SOIC quad differential comparator variants, but their ordering codes can encode different qualification, temperature, reel, or packaging details. The LM239DRG3 should not be declared electrically and mechanically identical solely from the shared family description. Confirm the ordering table, temperature grade, pinout, and package drawing before using LM239DR as a direct substitution.
LM239DRG3 vs LM339DR — which is better for industrial control?
Choose the LM239DRG3 when the design specifically calls for the LM239 commercial-grade family and its ordering qualification. Choose the LM339DR when its datasheet limits, temperature range, input common-mode behavior, and availability better fit the industrial controller. Both are identified as 14-pin SOIC quad comparators, but package similarity alone does not guarantee identical electrical limits; compare the complete manufacturer specifications before substitution.
When should I choose LM239DRG3 over LM239DG?
Choose the LM239DRG3 when its exact ordering qualification, temperature grade, and tape-and-reel configuration match the production design. Choose LM239DG when its specified grade and package details satisfy the application and it offers a preferable sourcing path. Because both belong to the LM239 family and use a 14-pin SOIC, the decisive factors are the ordering-code attributes and rated electrical limits rather than the number of comparator channels.
Is LM239DRG3 suitable for a 24 V industrial control board?
Yes, the LM239DRG3 is suitable for many 24 V industrial-control signal-conditioning stages because the LM239 family supports a single supply up to 30 V. Its four channels can monitor separate thresholds, and open-collector outputs can be pulled up to a suitable logic level. The design must remain within the input common-mode range and must not exceed the maximum total supply span of 36 V.
How do I interface the LM239DRG3 open-collector outputs?
Connect each open-collector output to a pull-up resistor and the logic or load rail it will drive. A transistor or suitable logic input can sink the pull-up current when the comparator output is active. Keep the pull-up resistor close to the output pin to limit rise time and susceptibility to coupling. Select the resistor value using the required sink current, permissible rise time, and the output saturation voltage.
What is the lead time for LM239DRG3?
The current production lead time for LM239DRG3 should be requested through the Request a Quote form on this page. Distributor landing pages can change inventory and scheduling information independently, so an archived stock statement is not a commitment for a new order quantity. Include the required quantity, target date, and 14-pin SOIC tape-and-reel packaging requirement when requesting a quotation.
Is LM239DRG3 in stock?
Current LM239DRG3 inventory should be confirmed through the Request a Quote form on this page. The product is offered as a standard Texas Instruments comparator in 14-pin SOIC tape-and-reel packaging, but actual stock depends on order quantity and replenishment timing. Request a formal quotation for the quantity and delivery schedule needed by the production build.
Where can I buy LM239DRG3 online?
Use the Request a Quote form on this page to request LM239DRG3 pricing, current availability, and lead time for the required quantity. The exact ordering code identifies the commercial-grade quad comparator in 14-pin SOIC tape-and-reel packaging. A written quotation provides a traceable commercial response while avoiding reliance on a temporary distributor landing-page stock count.
What is the best cross-brand equivalent for LM239DRG3?
No cross-brand equivalent can be recommended from the available manufacturer and ordering information without risking an unverifiable substitution. The cross-reference material identifies LM239-family and LM339-family devices but does not establish a specific different-manufacturer part as pin-to-pin and electrically equivalent to LM239DRG3. Use the Texas Instruments cross-reference search, then verify package pinout, supply range, common-mode range, offset voltage, response time, output architecture, and temperature grade.
How should pull-up resistors and layout be designed for LM239DRG3?
Place each pull-up resistor near its corresponding open-collector output and route the output away from sensitive analog inputs. Keep comparator inputs and ground-return paths short, and avoid sharing high-current return paths with precision references. The 14-pin SOIC footprint should follow the manufacturer’s recommended land pattern, with attention to solder mask and thermal relief requirements on the PCB assembly.

के लिए इंजीनियरिंग संदर्भ डेटा LM239DRG3 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LM239DRG3 when the design requires four independent differential comparisons, open-collector outputs, and operation from a single supply up to 30 V or dual supplies up to ±15 V. It is particularly suitable for 24 V industrial threshold detection, sensor interfaces, and power-rail supervision. Choose LM239DG, LM239DR, or LM239DT when their exact ordering grade, temperature range, or packaging better matches the PCB and production plan while retaining the LM239 family architecture. Consider LM339DR or LM339DRG4 when the LM339 family’s documented electrical limits and qualification better satisfy the design; their common 14-pin SOIC format supports board reuse, but electrical equivalence still requires comparison. For any candidate, verify pinout, input common-mode range, offset voltage, supply limits, output sink current, temperature grade, and open-collector pull-up requirements before releasing the substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LM239DG LM239DR LM239DT LM339DR LM339DRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Comparator Configuration Quad differential comparator Quad differential comparator Quad differential comparator Quad differential comparator Quad differential comparator Quad differential comparator
Output Type Open collector Open collector Open collector Open collector Open collector Open collector
Typical Response Time 0.3 µs 0.3 µs 0.3 µs 0.3 µs 0.3 µs 0.3 µs

मुख्य विशेषताएँ

  • Provides four independent comparison channels in one 14-pin package (बनामLM339DR)
  • Supports a wide single-supply operating range (बनामLM339DR)
  • Low input bias current supports higher-impedance sensing (बनामLM339DRG4)

डिज़ाइन नोट्स

Place the pull-up resistor for each open-collector output close to the corresponding LM239DRG3 output pin. This limits the trace that can receive capacitive coupling and reduces output rise time. Route comparator inputs away from relay, motor, and power-converter switching nodes. Because the device compares small voltage differences, the 5 mV maximum input offset at a 30 V supply should be considered when setting precision thresholds.

Keep the total voltage between supply and ground within the family limit of 36 V, and use the 2 V to 30 V single-supply range only for operating conditions that remain within the input common-mode limits. Add input bypassing close to VCC and ground connections to minimize switching noise. If the monitored rail can fall below 2 V, use a suitable regulator or supervisor rather than assuming the comparator will maintain a valid state.

Do not treat an open-collector output as a actively driven logic output. It can sink current, but the output rises only when a pull-up network is present. Select the pull-up voltage, resistance, and sink-current limit together, and check the comparator output saturation voltage at the expected load. If multiple open-collector outputs are wired together, ensure their individual output ratings support the combined pull-up current.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available manufacturer product and distributor information identifies the commercial-grade LM239 family but does not state specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LM239DRG3 datasheet LM239DRG3 pinout LM239DRG3 datasheet pdf LM239DRG3 equivalent LM239DRG3 replacement LM239DRG3 cross reference LM239DRG3 vs LM339DR LM239DRG3 footprint LM239DRG3 price LM239DRG3 stock Texas Instruments LM239DRG3 LM239DRG3 open collector output LM239DRG3 industrial control LM239DRG3 14 pin SOIC what can replace LM239DRG3

संबंधित कंपोनेंट्स और शब्द

Texas Instruments LM239DRG3 LM239 LM239DG LM239DR LM239DT LM339DR LM339DRG4 quad differential comparator comparator analog integrated circuit semiconductor open-collector output single-supply operation dual-supply operation input offset voltage input bias current input common-mode range response time 14-pin SOIC SOIC package family surface mount industrial threshold detection sensor interface power-supply supervision
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें