LM239DRG3 - Quad Differential Comparator | Texas Instruments
Артикул: LM239DRG3 ✓ АктивенLM239DRG3 Обзор
A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state when the voltage at the noninverting input rises above the voltage at the inverting input. The LM239 family combines four independent channels with a common power connection, making it suitable for level detection, threshold switching, sensor interfacing, industrial control, and signal conditioning within the wider semiconductor and analog IC hierarchy.
The quad architecture reduces package count and simplifies multi-channel designs. According to the Texas Instruments LM239 product information, the LM239 is a commercial-grade quad differential comparator. Open-collector outputs require an external pull-up network, but this gives engineers flexibility to choose the pull-up voltage independently from the comparator supply and to interface directly with open-collector buses.
Key electrical characteristics include a typical input bias current of 0.25 µA at a 5 V supply and a maximum input offset voltage of 5 mV at a 30 V supply. The family is designed for operation from a single supply over a wide voltage range, while dual-supply operation is possible when the total voltage between the two supplies remains within the device limits and the supply magnitude meets the minimum operating requirement.
Typical uses include monitoring a control voltage against a reference, detecting overvoltage or undervoltage conditions, converting sensor outputs into logic-level events, and driving industrial or automotive-style input modules. The four channels can also be used as window comparators when two channels are configured for upper and lower thresholds.
Designers should account for the open-collector output architecture and place the required pull-up resistor close to the output. Input common-mode range, output saturation voltage, supply ripple, and the timing of external pull-up components should be checked against the system thresholds. The manufacturer pin-description table should be used when assigning PCB tracks and verifying the 14-pin SOIC footprint.
This product page combines the family-level electrical characteristics, package and ordering information, same-footprint alternatives, comparison parameters, and practical comparator-layout guidance. It is intended to help engineers identify whether the LM239DRG3 fits a specific analog-interface design before finalizing the schematic and PCB layout.
Аналоги без доработки для LM239DRG3 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LM239DRG3 (тот же форм-фактор и посадочное место) — отличается по Comparator Type, Output Type, Package, Common-Mode Input Range, Number of Channels.
LM239DG
✅ Прямая заменаУточнить цену
Открыть даташит →LM239DR
✅ Прямая заменаУточнить цену
Открыть даташит →LM239DT
✅ Прямая заменаУточнить цену
Открыть даташит →LM339DR
✅ Прямая замена✓ В наличии
$0.0738 / шт.
Открыть даташит →LM339DRG4
✅ Прямая заменаУточнить цену
Открыть даташит →LM239DRG3 Максимальные параметры и электрические характеристики
| Comparator Type | Quad differential comparator |
| Number of Channels | 4 channels |
| Тип выхода | Open collector |
| Single-Supply Voltage Range | 2 V to 30 V |
| Dual-Supply Voltage Range | -15 V to +15 V |
| Minimum Total Supply Span | 2 V |
| Maximum Total Supply Span | 36 V |
| Minimum VCC | 1.5 V |
| Typical Input Bias Current | 0.25 µA at 5 V |
| Maximum Input Offset Voltage | 5 mV at 30 V |
| Typical Response Time | 0.3 µs |
| Корпус | 14-pin SOIC |
| Package Width | 3.90 mm |
| Package Body Span | 0.154 inch |
| Тип монтажа | Surface mount |
| Shipping Package | Tape and reel |
| Qualification | Commercial grade |
Конфигурация выводов LM239DRG3
| Контакт 1 | OUT 1 — Open-collector output for comparator 1 |
| Контакт 2 | IN 1- — Inverting input for comparator 1 |
| Контакт 3 | IN 1+ — Noninverting input for comparator 1 |
| Контакт 4 | GND — Ground connection |
| Контакт 5 | IN 2+ — Noninverting input for comparator 2 |
| Контакт 6 | IN 2- — Inverting input for comparator 2 |
| Контакт 7 | OUT 2 — Open-collector output for comparator 2 |
| Контакт 8 | OUT 3 — Open-collector output for comparator 3 |
| Контакт 9 | IN 3- — Inverting input for comparator 3 |
| Контакт 10 | IN 3+ — Noninverting input for comparator 3 |
| Контакт 11 | GND — Ground connection |
| Контакт 12 | IN 4+ — Noninverting input for comparator 4 |
| Контакт 13 | IN 4- — Inverting input for comparator 4 |
| Контакт 14 | OUT 4 — Open-collector output for comparator 4 |
Типичное применение
LM239DRG3 подходит для 6 применениеs: Industrial Threshold Detection, Power-Supply Overvoltage Monitor, Sensor Interface and Conditioning, Window Comparator, Relay and Actuator Interfacing, Battery and Portable Equipment Control.
Industrial Threshold Detection
The Texas Instruments LM239DRG3 is well suited to monitoring multiple control voltages in a 24 V industrial signal-conditioning board because its LM239 family supports a single supply up to 30 V. Four independent differential channels can each compare a field-level input with a reference generated by a resistor network. The open-collector output can sink current directly or drive a pull-up rail when a fault or limit is detected. Use the device only when the compared signal remains inside the specified input common-mode range. Add clamping and filtering for inductive or noisy industrial wiring, and select the external pull-up resistor to match the required logic level and output timing.
Рекомендуется
Power-Supply Overvoltage Monitor
The LM239DRG3 can supervise one or more power rails because each comparator evaluates a divided feedback voltage against a precision reference. Its quad organization allows a single 14-pin SOIC to monitor combinations of overvoltage, undervoltage, and enable conditions. The stated 2 V to 30 V single-supply range accommodates a 24 V control rail, while the 36 V maximum total supply span provides headroom when transient protection is included. Because the output is open collector, a fault signal can remain electrically isolated until a pull-up is added. The design must verify the input common-mode limits and account for the 5 mV maximum offset at a 30 V supply when setting a narrow threshold.
Рекомендуется
Sensor Interface and Conditioning
The LM239DRG3 can convert a slowly changing sensor signal into a logic-compatible event by comparing the sensor voltage with an adjustable reference. This arrangement is useful for thermistors, resistive sensors, and simple analog sensor networks where a dedicated comparator is unnecessary. The typical 0.25 µA input bias current at 5 V helps reduce loading of high-impedance sensing networks, while the 0.3 µs response time supports responsive threshold switching. Place the divider close to the relevant input, keep the reference node away from switching-node copper, and use the open-collector pull-up to establish the logic-high voltage. Verify that sensor and reference voltages remain within the usable common-mode range.
Рекомендуется
Window Comparator
Two LM239DRG3 channels can be configured as upper and lower threshold detectors to create a window comparator for temperature, voltage, or current-derived signals. One channel asserts when the monitored signal crosses the upper limit, while another asserts when it crosses the lower limit. Their open-collector outputs can be tied through separate pull-up paths to produce a valid-window indication or an out-of-range alarm. The quad package still leaves two channels available for additional functions. Use matched resistor networks to reduce threshold drift and place the pull-up resistors near the SOIC outputs. Confirm hysteresis behavior and output timing in the implemented circuit, especially when the monitored signal changes rapidly.
Рекомендуется
Relay and Actuator Interfacing
The open-collector outputs of the LM239DRG3 are useful for driving transistor stages that operate relays, solenoid drivers, or other actuators in industrial equipment. Each comparator can produce an active-low control event, and the external pull-up determines the logic-high level rather than tying it directly to the comparator supply. This flexibility allows one device to interface with a transistor logic gate or wired-control module. Use resistors or diodes to limit base or gate current and to suppress inductive transients at the actuator. The LM239DRG3 itself is not the power switch, so its output current and voltage limits must remain within the transistor interface ratings.
Рекомендуется
Battery and Portable Equipment Control
In portable or battery-powered equipment, the LM239DRG3 can implement low-voltage battery monitoring when its supply and input voltages remain within the LM239 operating limits. Four channels can track battery presence, charger state, or multiple threshold points, while the open-collector outputs can be pulled up to a low-energy rail. Low input bias current is beneficial when monitoring high-impedance divider networks, and the compact 14-pin SOIC supports four functions in one package. The actual battery chemistry, operating temperature, and minimum operating voltage must be checked carefully. A regulator or supervisor may be preferable when the rail can fall below the comparator’s 2 V minimum operating condition.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LM239DRG3 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LM239DG | LM239DR | LM239DT | LM339DR | LM339DRG4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Comparator Configuration | Quad differential comparator | Quad differential comparator | Quad differential comparator | Quad differential comparator | Quad differential comparator | Quad differential comparator |
| Output Type | Open collector | Open collector | Open collector | Open collector | Open collector | Open collector |
| Typical Response Time | 0.3 µs | 0.3 µs | 0.3 µs | 0.3 µs | 0.3 µs | 0.3 µs |
Ключевые отличия
- Provides four independent comparison channels in one 14-pin package (против LM339DR)
- Supports a wide single-supply operating range (против LM339DR)
- Low input bias current supports higher-impedance sensing (против LM339DRG4)
Заметки по проектированию
Place the pull-up resistor for each open-collector output close to the corresponding LM239DRG3 output pin. This limits the trace that can receive capacitive coupling and reduces output rise time. Route comparator inputs away from relay, motor, and power-converter switching nodes. Because the device compares small voltage differences, the 5 mV maximum input offset at a 30 V supply should be considered when setting precision thresholds.
Keep the total voltage between supply and ground within the family limit of 36 V, and use the 2 V to 30 V single-supply range only for operating conditions that remain within the input common-mode limits. Add input bypassing close to VCC and ground connections to minimize switching noise. If the monitored rail can fall below 2 V, use a suitable regulator or supervisor rather than assuming the comparator will maintain a valid state.
Do not treat an open-collector output as a actively driven logic output. It can sink current, but the output rises only when a pull-up network is present. Select the pull-up voltage, resistance, and sink-current limit together, and check the comparator output saturation voltage at the expected load. If multiple open-collector outputs are wired together, ensure their individual output ratings support the combined pull-up current.
Информация о соответствии
The available manufacturer product and distributor information identifies the commercial-grade LM239 family but does not state specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.