LM27965SQ-M - Dual White LED Driver | Texas Instruments
MPN: LM27965SQ-M ✓ सक्रियLM27965SQ-M अवलोकन
A charge-pump LED driver is a power-management IC that uses switched-capacitor voltage conversion rather than an inductor to generate the controlled voltage needed by LEDs. The LM27965 belongs to the LED driver hierarchy, where switched-capacitor regulation combines with constant-current sinking, PWM dimming, and serial control to illuminate LCD backlights or other white-LED arrays.
The device can drive up to nine LEDs, with individual drive current programmable by external resistors up to 30 mA per LED. Its three independently controlled output groups support primary, secondary, and auxiliary backlight channels. A primary group can be configured for four or five LEDs, while the second group can be configured for four LEDs. The manufacturer specifies 0.3% current matching and peak LED-drive efficiency of 91%.
The LM27965 uses an adaptive 1× to 3/2× charge-pump topology, eliminating the need for an inductor. Its operating input range is 2.7 V to 5.5 V, supporting extended Li-ion operating conditions. The switching frequency is 1.27 MHz, and an external chip-reset pin provides a dedicated reset control for system integration.
Two I2C-compatible chip addresses are offered within the LM27965 family. Address 0x38 identifies the LM27965SQ-M, while address 0x36 is assigned to LM27965SQ. This distinction matters when two driver channels share a common serial bus or when firmware must identify the installed device.
The 24-pin leadless package supports compact display construction while exposing group-enable, brightness-control, reset, and LED-current programming functions. Board layouts should preserve short LED current paths, place input and charge-pump capacitors near their associated pins, and maintain adequate copper around the exposed pad for thermal and layout performance.
This product page combines manufacturer specifications, family-level drop-in options, package and pin-location guidance, pricing structure, application analysis, and design notes. It is intended to help engineers evaluate the LM27965SQ-M for compact dual-display backlighting, portable media equipment, and other white-LED systems requiring precise current matching and serial dimming.
के लिए ड्रॉप-इन विकल्प LM27965SQ-M — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
LM27965SQ/NOPB
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LM27965SQX
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LM27965SQ-M Maximum Ratings और Electrical Characteristics
| Product Type | Dual-display white LED driver |
| Charge-Pump Topology | Adaptive 1× to 3/2× switched-capacitor |
| LED Output Count | 9 outputs |
| Total LED Drive Current | 180 mA |
| Maximum Current per LED | 30 mA per LED |
| इनपुट वोल्टेज रेंज | 2.7 V to 5.5 V |
| स्विचिंग फ्रीक्वेंसी | 1.27 MHz |
| Peak LED Drive Efficiency | 91% |
| Current Matching | 0.3% |
| Independently Controlled Output Groups | 3 groups |
| Primary Group Configuration | 4 or 5 LEDs |
| Secondary Group Configuration | 4 LEDs |
| I2C Chip Address | 0x38 |
| Brightness Control | I2C-compatible |
| Reset Control | External chip RESET pin |
| Inductor Requirement | No inductor required |
| पैकेज | 24-pin WQFN (RTW) |
| Package Dimensions | 4 mm × 4 mm × 0.8 mm |
| Total Solution Size | 25 mm² |
| माउंटिंग प्रकार | Surface mount |
| ऑपरेटिंग तापमान रेंज | -30°C to +85°C |
LM27965SQ-M 4 mm × 4 mm × 0.8 mm पिन कॉन्फ़िगरेशन गाइड
LM27965SQ-M (4 mm × 4 mm × 0.8 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस पावर डिवाइस में गेट, ड्रेन और सोर्स टर्मिनल हैं। नॉन-पोलराइज़्ड पैकेज के लिए, सटीक पिन 1 ओरिएंटेशन और फुटप्रिंट विवरण हेतु निर्माता डेटाशीट देखें। सामान्य अनुप्रयोगों में पावर सप्लाई डिज़ाइन, मोटर ड्राइविंग और लोड स्विचिंग शामिल हैं।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LM27965SQ-M.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LM27965SQ-M के लिए उपयुक्त है 6 अनुप्रयोगs: Compact Dual-Display LCD Backlighting, Tablet and Portable Media Equipment, Automotive or Industrial Display Modules, White-LED Signage and General Illumination, Battery-Powered Instrument and Sensor Displays, Multi-Display Control Systems.
Compact Dual-Display LCD Backlighting
The LM27965SQ-M is well suited to compact displays that need several independently controlled white-LED groups. Its nine constant-current outputs and three controlled groups allow a primary group of four or five LEDs and a secondary group of four LEDs to share one driver. The 0.3% current matching specification helps maintain consistent luminance across the array, while the 4 mm × 4 mm WQFN package preserves board area. Its adaptive 1× to 3/2× charge pump also removes the inductor normally associated with a boost converter.
अनुशंसित
Tablet and Portable Media Equipment
The LM27965SQ-M fits portable media equipment where display lighting must be compact, adjustable, and powered from a 2.7 V to 5.5 V source. Its input range covers extended Li-ion operating conditions, and I2C-compatible brightness control lets a host processor adjust illumination without dedicating multiple PWM outputs. With no inductor required and up to 180 mA total LED drive, the device provides useful integration density. Designers should confirm LED forward voltage, charge-pump headroom, and thermal performance in the finished enclosure.
अनुशंसित
Automotive or Industrial Display Modules
The LM27965SQ-M can support compact instrument panels and display modules requiring controlled LED current over a 2.7 V to 5.5 V input range. Constant-current sinking limits brightness variation as supply voltage or LED forward voltage changes, and the 0.3% matching specification supports uniform illumination. The device's external RESET pin and I2C dimming interface simplify integration with system controllers. Industrial qualification details are not stated on the manufacturer product page, so the target application's environmental and automotive requirements must be reviewed separately.
अनुशंसित
White-LED Signage and General Illumination
The LM27965SQ-M can drive grouped white-LED arrays where I2C brightness control and consistent channel current are valuable. Up to nine outputs and 180 mA total current provide enough scale for compact illuminated surfaces, while three independently controlled groups permit separate brightness regions or visual effects. The 1.27 MHz switched-capacitor implementation avoids an inductor and supports a compact solution. For signage, validate ambient temperature, LED forward-voltage spread, current-setting resistors, and the maximum continuous operating time of the selected group.
अनुशंसित
Battery-Powered Instrument and Sensor Displays
The LM27965SQ-M is useful in battery-powered instruments because it accepts 2.7 V to 5.5 V input and integrates the switched-capacitor LED supply into one small package. I2C-compatible brightness control allows the system controller to reduce display illumination when power is constrained. The driver can maintain separate brightness control over three LED groups without requiring external inductors. Battery-system designers should still calculate average and peak input current, verify the charge-pump's available headroom at the lowest battery voltage, and confirm that the display's forward voltage remains within the operating region.
अनुशंसित
Multi-Display Control Systems
The LM27965SQ-M supports control systems that require more than one illuminated area and structured brightness management. Three independently controlled output groups can operate distinct LED regions, while I2C-compatible brightness control centralizes adjustment. Its dedicated external RESET pin provides a defined way to coordinate the driver with other system blocks. When more than one LM27965 family device shares a bus, select address 0x38 for the -M variant or 0x36 for LM27965SQ, then verify timing and address behavior across the complete startup sequence.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LM27965SQ-M — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LM27965SQ/NOPB | LM27965SQX |
|---|---|---|---|
| Package | WQFN-24 (RTW), 4 mm × 4 mm | WQFN-24 (RTW), 4 mm × 4 mm | WQFN-24 (RTW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| LED Output Count | 9 outputs | 9 outputs | 9 outputs |
मुख्य विशेषताएँ
- Assigned 0x38 I2C address (बनामLM27965SQ/NOPB)
- Nine-output dual-display integration (बनामLM27965SQ/NOPB)
- Inductor-free compact implementation (बनामLM27965SQX)
डिज़ाइन नोट्स
Place the LM27965SQ-M input capacitor, flying capacitor, and output-loop components directly beside the pins specified by the manufacturer application circuit. These switched-capacitor connections carry high-frequency current, so long loops increase parasitic inductance, ringing, and EMI. Keep the 24-WQFN exposed-pad connection and thermal copper consistent with the datasheet land pattern, and avoid placing sensitive analog or high-speed communication traces beneath the charge-pump return path.
Do not assume that LM27965SQ and LM27965SQ-M are firmware-identical. The -M device uses I2C address 0x38, while LM27965SQ uses 0x36. Confirm the assembled part marking and update bus-address constants before power-up. Also verify the charge-pump output has sufficient voltage headroom above the highest LED forward voltage and programmed sink current; otherwise brightness may be reduced or current regulation may move outside its intended operating region.
Estimated: use Pdissipation = (VIN - VLED) × ILED to estimate charge-pump loss at the maximum aggregate LED current of 180 mA. For example, at 5.5 V input, 3.6 V LED voltage, and 180 mA load, the estimated power loss is 0.342 W before accounting for control overhead and conversion efficiency. Confirm the actual junction-temperature rise using the package thermal data and the finished PCB copper area rather than relying on the calculation alone.
Calculate LED current-setting resistors from the manufacturer equations and include the LED forward-voltage spread, resistor tolerance, and sink accuracy. Check that no group exceeds 30 mA per LED and that the aggregate does not exceed 180 mA. Because brightness is adjusted through the serial interface, test the minimum, nominal, and maximum dimming settings while monitoring the input rail and charge-pump output for droop or unstable regulation.
अनुपालन जानकारी
The manufacturer product page and part-detail result do not explicitly state the requested environmental compliance status. The -M ordering code is not treated as proof of lead-free or halogen-free status.