Texas Instruments

LM2902N-MAND - 26V 1MHz Quad Op Amp | Texas Instruments

MPN: LM2902N-MAND ✓ सक्रिय
26 V Vdss 14-pin PDIP Package
न्यूनतम ऑर्डर मात्रा: 1 |

LM2902N-MAND अवलोकन

Texas Instruments LM2902N-MAND is a four-amplifier operational-amplifier IC designed for general-purpose analog signal conditioning. The LM2902 family is specified for operation from a single 3 V to 26 V supply, with a 1 MHz gain-bandwidth product, and is offered in a 14-pin through-hole dual in-line package. Each of the four amplifiers is independently frequency compensated and can operate from single-supply or split-supply configurations.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The quad operational amplifier belongs to the broader hierarchy of operational amplifier, analog amplifier, analog signal-processing IC, and semiconductor. Its four independent channels make one package practical for buffering, amplification, active filtering, comparators, instrumentation stages, and control loops that require several similar analog functions.

The principal family-level characteristics are a 26 V maximum supply rating, 1 MHz unity-gain bandwidth, four amplifier circuits, and a 14-pin PDIP package. Push-pull output capability supports output swing above the negative supply rail under suitable load conditions. These characteristics are especially useful in industrial equipment where a higher supply rating and low-cost general-purpose amplification can simplify the power architecture.

Each amplifier uses internal frequency compensation, eliminating the need for an external compensation network in typical closed-loop configurations. The same basic amplifier can be used as a non-inverting stage with high input impedance, an inverting stage with a defined gain, or a voltage follower for buffering. With a 1 MHz gain-bandwidth product, practical closed-loop bandwidth depends on the selected noise gain, while stability and output behavior must be evaluated with the actual load and supply conditions.

Typical uses include sensor interfaces, transducer signal conditioning, active analog filters, industrial controls, audio preamplification, feedback networks, and general signal conditioning. The wide supply range permits operation from industrial 24 V systems when the total supply remains within the 26 V rating, while lower-supply operation supports lower-energy systems. Four channels can reduce package count when the circuit contains multiple independent analog paths.

Designers should verify the exact suffix-specific ordering information, operating-temperature grade, and pin marking before production release. Decoupling capacitors should be placed close to the supply pins, signal traces should avoid nearby switching nodes, and unused amplifier channels should be configured according to the manufacturer guidance rather than left floating. Input and output voltage, current, stability, and common-mode limits must be checked at the intended supply voltage.

This product page combines the manufacturer product identity, verified distributor information, package-level details, drop-in sourcing options, and application guidance. It also highlights the practical trade-offs between the family-level LM2902N and other quad operational amplifiers, helping engineers evaluate PCB reuse, supply-voltage tolerance, bandwidth, sourcing, and functional fit before finalizing a bill of materials.

के लिए ड्रॉप-इन विकल्प LM2902N-MAND — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM2902N-MAND (समान फॉर्म फैक्टर और फुटप्रिंट).

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin DIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin DIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin DIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin DIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N-MAND Maximum Ratings और Electrical Characteristics

Product Type Quad operational amplifier
Number of Amplifier Circuits 4 circuits
Maximum Supply Voltage 26 V
Unity-Gain Bandwidth 1 MHz
आउटपुट प्रकार Push-pull
Application Category General-purpose instrumentation and signal conditioning
पैकेज 14-pin PDIP
पिन काउंट 14 pins
माउंटिंग प्रकार Through-hole
Compensation Internally frequency compensated
Supply Configuration Single supply or split supply

LM2902N-MAND पिन कॉन्फ़िगरेशन

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
पिन 1 OUT1 — Amplifier 1 output
पिन 2 -IN1 — Amplifier 1 inverting input
पिन 3 +IN1 — Amplifier 1 non-inverting input
पिन 4 V+ — Positive supply connection
पिन 5 +IN2 — Amplifier 2 non-inverting input
पिन 6 -IN2 — Amplifier 2 inverting input
पिन 7 OUT2 — Amplifier 2 output
पिन 8 OUT3 — Amplifier 3 output
पिन 9 -IN3 — Amplifier 3 inverting input
पिन 10 +IN3 — Amplifier 3 non-inverting input
पिन 11 V- — Negative supply or ground connection
पिन 12 +IN4 — Amplifier 4 non-inverting input
पिन 13 -IN4 — Amplifier 4 inverting input
पिन 14 OUT4 — Amplifier 4 output

सामान्य अनुप्रयोग

LM2902N-MAND के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Signal Conditioning, Active Analog Filters, Audio Preamplification and Buffering, Power Supply Feedback Control, Data Acquisition and Instrumentation, Motor and Control-System Interfaces.

🏭

Industrial Sensor Signal Conditioning

LM2902N-MAND fits industrial sensor interfaces that require several low-frequency conditioning stages on one board. Its four internally frequency-compensated amplifiers can amplify, invert, filter, and buffer sensor signals while the associated LM2902 family operates from a supply rated up to 26 V. That 26 V rating is relevant to 24 V industrial control systems because it can support conventional industrial rails, although the exact suffix-specific limits must be checked. With a 1 MHz unity-gain bandwidth, the device is most appropriate for slow sensor signals and control loops rather than wideband instrumentation. Use one channel for the primary amplifier and the others for filtering or reference buffering, while keeping input common-mode voltage and output swing within the manufacturer limits.

🔧

Active Analog Filters

The LM2902N-MAND can implement multiple active-filter sections in audio, control, and measurement equipment. Its four independent, internally compensated operational amplifiers allow Sallen-Key or state-variable topologies to be assembled without separate amplifier packages. The family-level 1 MHz unity-gain bandwidth provides useful loop gain for filters with moderate frequency requirements, while the 26 V supply rating accommodates higher-voltage industrial signal chains. Component tolerances and the amplifier gain-bandwidth relationship determine the attainable cutoff frequency and phase margin. Confirm noise-gain stability, output loading, and supply headroom for each filter section. The device is especially suitable for low-frequency active filters where simplicity and multi-channel integration matter more than the very high bandwidth or low noise of a precision amplifier.

🎧

Audio Preamplification and Buffering

LM2902N-MAND is appropriate for general-purpose audio preamplification, input buffering, and level conditioning when four related analog channels are required. Its push-pull outputs and 26 V family supply capability allow operation from higher-voltage headroom-oriented analog rails, subject to the exact device limits. The 1 MHz unity-gain bandwidth is well above the audible range and ample for ordinary audio conditioning, though it does not imply low-noise or high-fidelity performance. Each channel can follow a non-inverting topology for signal gain or an inverting topology when channel inversion is useful. Avoid using it for demanding low-noise microphone preamplification without first checking input bias current, offset voltage, and noise. The main benefit is consolidating several standard audio analog stages into one 14-pin package.

⚡

Power Supply Feedback Control

LM2902N-MAND can support error-amplifier, feedback, and supervisory functions in linear power-supply and control-system designs. Four channels permit use of a main error amplifier alongside current-limit, auxiliary feedback, or monitoring paths. The LM2902 family's 26 V maximum supply rating is useful for 24 V industrial power systems, while single- or split-supply operation supports different feedback arrangements. The 1 MHz unity-gain bandwidth allows response to control-loop errors well beyond typical slow power-supply dynamics, but loop compensation still governs stability. Place the feedback-divider output close to the amplifier input, keep high-current switching paths away from the feedback node, and verify saturation and slew requirements during startup and load transients. This application requires careful stability analysis rather than relying on bandwidth alone.

📊

Data Acquisition and Instrumentation

LM2902N-MAND is useful in moderate-speed data-acquisition front ends where several analog channels require common amplification and buffering. The four amplifiers can condition outputs from sensors, transducers, dividers, or analog switches before conversion. A 1 MHz unity-gain bandwidth supports signal paths well above conventional low-frequency process measurements, while the 26 V family rating can simplify interface to 24 V test equipment. The amplifier is not inherently a precision part, so offset voltage, bias current, input bias errors, and common-mode range must be evaluated against the measurement accuracy budget. Use a grounded or differentially referenced topology appropriate to the source, provide local supply bypassing, and keep high-impedance input traces short. This device is most appropriate when general-purpose accuracy and cost matter more than micropower operation.

🤖

Motor and Control-System Interfaces

LM2902N-MAND can condition feedback and reference signals in industrial motor-control and electromechanical systems. Four channels can handle position feedback, command scaling, current-sense amplification, and error comparison within a 24 V control environment. The associated LM2902 family's 26 V supply rating accommodates conventional industrial rails with design margin, and its 1 MHz bandwidth is ample for many low-bandwidth control loops. Use the amplifier only where its input and output ranges support the sensed signal and excitation waveform; motor transients can exceed nominal rail limits even when the average supply is 24 V. Add appropriate protection, keep feedback routing away from switching nodes, and verify that each amplifier remains stable with the real load. The main advantage is consolidating multiple general-purpose analog functions without changing the through-hole package style.

What are the key specifications of LM2902N-MAND that engineers should know?
The LM2902N-MAND belongs to the Texas Instruments LM2902 family, which combines four independently frequency-compensated operational amplifiers in a 14-pin PDIP package. According to the manufacturer product page, the family is a quad 26 V operational amplifier with a 1 MHz gain-bandwidth product. It supports single-supply or split-supply operation and uses push-pull outputs. The suffix-specific operating-temperature and ordering details should be confirmed in the ordering information for LM2902N-MAND.
What is LM2902N-MAND and what does it do?
LM2902N-MAND is a four-channel operational-amplifier IC for general-purpose analog signal conditioning. The Texas Instruments LM2902 family provides four independent, internally frequency-compensated amplifiers, a 1 MHz unity-gain bandwidth, and operation from a single or split supply. Each channel can provide voltage amplification, impedance buffering, active filtering, or comparator-style functions. The device is associated with the 14-pin PDIP LM2902N package family.
What is the supply voltage range of LM2902N-MAND?
The LM2902N-MAND is associated with a maximum supply rating of 26 V and operates from single-supply or split-supply arrangements. According to the Texas Instruments LM2902-N product page, the quad amplifier family is designed for a wide supply-voltage range. Use the manufacturer datasheet and suffix-specific ordering information to establish minimum and recommended supply limits for the exact LM2902N-MAND configuration before designing the power rail.
What is the gain-bandwidth product of LM2902N-MAND?
The LM2902 family associated with LM2902N-MAND has a 1 MHz unity-gain bandwidth product. According to the Texas Instruments product page, the part is a quad 1 MHz operational amplifier. A 1 MHz unity-gain bandwidth supports moderate-speed signal conditioning, but closed-loop bandwidth will generally be lower at higher noise gains and should be evaluated using the actual feedback network, load, and supply voltage.
Where can I download the LM2902N-MAND datasheet PDF?
The official LM2902-N product page at Texas Instruments is the preferred starting point for the manufacturer datasheet, ordering information, and quality documentation. Use the manufacturer product page at https://www.ti.com/product/LM2902-N to locate the PDF and confirm that the document revision covers LM2902N-MAND. The exact package, temperature grade, and suffix ordering codes should be checked on the ordering-information table before release to production.
Where can I find the LM2902N-MAND pinout?
Use the pin-description table and package drawing in the Texas Instruments LM2902 family documentation to assign LM2902N-MAND connections. The LM2902N configuration is a 14-pin PDIP containing four amplifiers, with each channel using non-inverting input, inverting input, and output pins. The package also includes supply and ground pins. Confirm the exact pin arrangement against the current manufacturer datasheet before laying out a PCB or assembling a replacement board.
What can replace LM2902N-MAND?
An LM2902N-MAND replacement must use the same 14-pin PDIP footprint and preserve the four-amplifier pin arrangement, supply rating, and intended frequency-compensated operation. Texas Instruments LM2902N and STMicroelectronics LM2902N are direct family candidates, while other LM2902N sources may support second sourcing after pin and parameter verification. Use the Request a Quote form on this page for current sourcing, and approve a substitute only after comparing the complete manufacturer datasheet.
Is LM2902N-MAND the same as LM2902N?
LM2902N-MAND is an orderable suffix of the LM2902 family, while LM2902N is the base 14-pin PDIP ordering designation. According to Texas Instruments, the family shares the same quad, 26 V, 1 MHz operational-amplifier architecture. The suffix can carry ordering, marking, or qualification information, so engineers should verify the exact suffix-specific temperature grade and marking rather than treating every LM2902N ordering code as interchangeable without review.
LM2902N-MAND vs LM2902N - which is better for an industrial control board?
LM2902N-MAND is the preferable selection when the exact suffix qualification, marking, or approved configuration is required; LM2902N is preferable when the standard base ordering option is acceptable for the design. Both are associated with the same 14-pin PDIP quad operational-amplifier family, 26 V maximum supply rating, and 1 MHz bandwidth. Choose by checking the suffix-specific ordering table and production traceability requirements rather than by basic analog performance alone.
When should I choose LM2902N-MAND over another quad general-purpose op amp?
Choose LM2902N-MAND when a design needs four internally compensated general-purpose amplifiers, a 1 MHz unity-gain bandwidth, a 26 V family supply rating, and an established 14-pin PDIP footprint. It is appropriate for sensor interfaces, active filters, buffering, industrial control blocks, and moderate-speed feedback loops. Select another amplifier when the application requires substantially higher bandwidth, lower offset, lower noise, rail-to-rail output, or a qualification grade not assigned to this suffix.
Is LM2902N-MAND suitable for a 24 V industrial control application?
The LM2902N-MAND is a reasonable candidate for a 24 V industrial control application because the associated LM2902 family has a 26 V maximum supply rating and supports split-supply operation. The system must maintain adequate transient and steady-state margin below 26 V, including regulator tolerance and startup overshoot. Confirm the suffix-specific absolute maximum ratings, input common-mode range, output swing, temperature grade, and power dissipation before approving the design.
What is the best cross-brand equivalent for LM2902N-MAND?
The STMicroelectronics LM2902N is the clearest cross-brand candidate because it is identified as a general-purpose four-circuit operational amplifier in a 14-DIP package, matching the key architecture and footprint of the Texas Instruments LM2902N family. Confirm pin orientation, supply rating, bandwidth, output-current capability, and temperature grade in each manufacturer datasheet. Cross-brand equivalence does not eliminate the need for circuit-level validation.
Where can I buy LM2902N-MAND and what is its current lead time?
Use the Request a Quote form on this page to request current LM2902N-MAND availability, lead time, minimum order quantity, and package configuration from XAIPART. The manufacturer product page confirms the LM2902-N family, but live inventory and production timing can change independently of the family status. Provide the target quantity, required suffix, and destination country when requesting a quotation so sourcing can confirm the exact configuration.
What is the price of LM2902N-MAND?
The current commercial price for LM2902N-MAND is best obtained through the Request a Quote form on this page. Pricing depends on order quantity, exact suffix and package configuration, component condition, and current production status. Submit the required MPN and annual or prototype quantity for a quotation tied to the requested configuration rather than relying on a generic LM2902 family price that may apply to a different suffix or package.
Is LM2902N-MAND in stock?
LM2902N-MAND stock status and available production quantity should be confirmed through the Request a Quote form on this page. The Texas Instruments product page lists the LM2902-N family, but it does not establish a fixed, real-time stock count for the exact LM2902N-MAND suffix. Include prototype quantity, forecast volume, and required package configuration in the request so the sourcing response reflects the actual build schedule.

के लिए इंजीनियरिंग संदर्भ डेटा LM2902N-MAND — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose LM2902N-MAND when the design requires four internally compensated general-purpose operational amplifiers, a 1 MHz unity-gain bandwidth, a 26 V family supply rating, and a 14-pin through-hole footprint. It is well matched to industrial 24 V control boards, sensor conditioners, active filters, audio preamplifiers, and power-supply feedback circuits where moderate bandwidth and simple integration are more important than precision offset, micropower operation, or rail-to-rail output. Choose the Texas Instruments LM2902N when the base ordering designation satisfies your qualification and marking requirements. Consider STMicroelectronics LM2902N for a second source, but verify pin orientation, temperature grade, offset, bias current, output current, and absolute limits against the complete datasheets. National Semiconductor, HGSEMI, and Intersil LM2902N sources may also support legacy or second-source requirements. Do not select an SOIC-package alternative when the existing PCB has through-hole DIP lands; a footprint change requires redesign rather than a drop-in replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LM2902N LM2902N LM2902N LM2902N LM2902N
Package 14-pin PDIP 14-pin PDIP 14-pin DIP 14-pin DIP 14-pin DIP 14-pin DIP
Brand Texas Instruments Texas Instruments STMicroelectronics National Semiconductor HGSEMI Intersil
Amplifier Count 4 4 4 4 4 4
Application Class General-purpose instrumentation and signal conditioning General-purpose instrumentation and signal conditioning General-purpose instrumentation and signal conditioning General-purpose instrumentation and signal conditioning General-purpose instrumentation and signal conditioning General-purpose instrumentation and signal conditioning

मुख्य विशेषताएँ

  • Four general-purpose amplifiers consolidated in one through-hole package (बनामLM324N)
  • Higher family supply-voltage ceiling (बनामLM324N)
  • Established 14-pin family footprint supports second sourcing (बनामSTMicroelectronics LM2902N)
  • Single-package channel consolidation (बनामSTMicroelectronics LM2902N)

डिज़ाइन नोट्स

Treat the 26 V figure as an absolute family-level ceiling, not a recommended operating rail. For a nominal 24 V industrial supply, include regulator tolerance, load transients, startup overshoot, and temperature effects in the worst-case analysis. Place local supply bypass capacitors close to pins 4 and 11, and follow the capacitor values and layout guidance in the manufacturer datasheet. Decoupling requirements can change with gain, source impedance, and operating frequency.

Do not assume that every amplifier channel may be left unused. Configure each unused channel as a voltage follower with its output tied to its inverting input, connect the non-inverting input to a valid common-mode reference within the permitted range, and confirm the output remains stable. Also check the input common-mode range at the actual supply voltage; a 26 V maximum supply rating does not imply that every input can swing across the complete rail range.

Route high-impedance input and feedback traces away from switching-node copper, inductors, relay contacts, and other sources of injected noise. Keep feedback loops compact and connect the bypass return path directly to the relevant ground or supply pin. Because this is a through-hole 14-pin DIP, use a socket only when its pin contacts and insulation can preserve reliable electrical and mechanical performance at the operating temperature.

Use the 1 MHz unity-gain bandwidth as the starting point for gain-bandwidth planning, not as an unconditional operating-frequency limit. Closed-loop bandwidth decreases as noise gain rises, and capacitive loading can reduce stability. Add isolation resistors when driving long cables, sampled sensor outputs, or large capacitive loads, and verify the resulting response with oscilloscope measurements before production release.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The Texas Instruments LM2902-N product page is the authoritative source for the exact suffix's environmental and qualification information. No specific compliance declaration is stated for LM2902N-MAND in the manufacturer-page snippets.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

lm2902n datasheet lm2902n equivalent lm2902n datasheet pdf lm2902n nopb lm2902n circuits lm2902n pdf LM2902N-MAND datasheet LM2902N-MAND pinout LM2902N-MAND replacement LM2902N-MAND equivalent LM2902N-MAND 14 pin DIP LM2902N-MAND price Texas Instruments LM2902N-MAND LM2902N-MAND industrial control

संबंधित कंपोनेंट्स और शब्द

Texas Instruments LM2902N-MAND LM2902N STMicroelectronics National Semiconductor HGSEMI Intersil LM324N quad operational amplifier operational amplifier analog amplifier analog signal-processing IC semiconductor general-purpose amplifier push-pull output unity-gain bandwidth 1 MHz 26 V internal frequency compensation single-supply operation split-supply operation 14-pin PDIP DIP package family through-hole surface-mount package hierarchy sensor signal conditioning active filter power-supply feedback control
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें