Texas Instruments

LM2902N/NOPB - Quad 26V 1MHz Op Amp | Texas Instruments

MPN: LM2902N/NOPB ✓ सक्रिय
3 V to 26 V Vdss 14-pin PDIP Package
न्यूनतम ऑर्डर मात्रा: 1 |

LM2902N/NOPB अवलोकन

Texas Instruments LM2902N/NOPB is a quad general-purpose operational amplifier rated for a 3 V to 26 V supply range, with four independent amplifiers and a 1 MHz unity-gain bandwidth. The device is offered in a 14-pin PDIP package and is specified for operation from -40 °C to 85 °C. Its four amplifiers are internally frequency compensated, allowing straightforward implementation of amplifier, comparator, buffer, and feedback-control circuits.

An operational amplifier is an analog signal-conditioning IC that uses high open-loop gain and negative feedback to amplify voltage differences. The quad-amplifier configuration places four independent operational amplifiers in one package, reducing component count and board area where multiple analog channels are required. Within the power-management hierarchy, an LM2902N/NOPB belongs to the linear integrated-circuit family, while functionally it serves as an analog signal-processing IC for instrumentation, control, and interface circuits.

Key characteristics include four independent channels, a 26 V maximum supply rating, 1 MHz gain-bandwidth performance, and approximately 0.5 V/µs slew rate. The internally compensated architecture avoids external frequency-compensation components in ordinary closed-loop applications. Input and output arrangements follow the conventional dual-inline operational-amplifier pinout, allowing each channel to be used independently as long as the unused amplifier is configured safely.

The wide single-supply operating range allows the device to operate from industrial and automotive-related 12 V rails, provided the supply remains within the 26 V rating. Its 1 MHz bandwidth is appropriate for low-frequency control loops, transducers, analog interfaces, and general-purpose signal conditioning rather than high-speed video or communications channels. The PDIP package also supports through-hole assembly and hand prototyping.

Typical applications include four-channel sensor amplification, industrial process-control loops, bridge-signal conditioning, audio preamplification, active filtering, and general analog computation. Each channel can also serve as a comparator when configured with suitable positive feedback, although the output-stage behavior and saturation recovery should be evaluated for the target circuit.

When laying out a board, place the device away from switching nodes and high-current return paths, provide a local supply bypass capacitor close to the power pin, and route high-impedance input traces away from output and clock signals. Check input and output common-mode limits, output-current demand, thermal dissipation, and supply stability against the manufacturer datasheet before releasing the design.

This product page combines the exact orderable part information with practical package, application, replacement, and circuit-layout guidance. It also distinguishes the 14-pin PDIP target from surface-mount family members so engineers can avoid selecting a mechanically incompatible substitute.

के लिए ड्रॉप-इन विकल्प LM2902N/NOPB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM2902N/NOPB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package Type.

Texas Instruments
Package Type: 14-pin DIP
Texas Instruments
Package Type: 14-pin DIP

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N/PB

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N

✅ ड्रॉप-इन
Texas Instruments
📦 14-pin PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2902N/NOPB Maximum Ratings और Electrical Characteristics

Product Type Quad general-purpose operational amplifier
Number of Amplifier Channels 4 channels
Supply Voltage Range 3 V to 26 V
Maximum Supply Voltage 26 V
Unity-Gain Bandwidth 1 MHz
Slew Rate 0.5 V/µs
Compensation Internally frequency compensated
ऑपरेटिंग तापमान रेंज -40 °C to 85 °C
Package Type 14-pin PDIP
पिन की संख्या 14 pins
माउंटिंग स्टाइल Through-hole
आउटपुट प्रकार Push-pull

LM2902N/NOPB पिन कॉन्फ़िगरेशन

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
पिन 1 OUT1 — Amplifier 1 output
पिन 2 IN1- — Amplifier 1 inverting input
पिन 3 IN1+ — Amplifier 1 non-inverting input
पिन 4 V+ — Positive supply voltage
पिन 5 IN2+ — Amplifier 2 non-inverting input
पिन 6 IN2- — Amplifier 2 inverting input
पिन 7 OUT2 — Amplifier 2 output
पिन 8 OUT3 — Amplifier 3 output
पिन 9 IN3- — Amplifier 3 inverting input
पिन 10 IN3+ — Amplifier 3 non-inverting input
पिन 11 V- — Negative supply voltage
पिन 12 IN4+ — Amplifier 4 non-inverting input
पिन 13 IN4- — Amplifier 4 inverting input
पिन 14 OUT4 — Amplifier 4 output

सामान्य अनुप्रयोग

LM2902N/NOPB के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Signal Conditioning, Wheatstone Bridge Instrumentation, Active Audio Preamplification, Automotive Control Interfaces, 12V and 24V Control Loops, General Comparator and Threshold Circuit.

🏭

Industrial Sensor Signal Conditioning

The LM2902N/NOPB is well suited to conditioning low-frequency sensor signals because four independent, internally compensated amplifiers can handle multiple inputs without requiring separate packages. A typical use places one amplifier in a non-inverting configuration, another in an active filter, and the remaining channels in gain or offset stages. The 3 V to 26 V single-supply range supports industrial rails, while the 1 MHz unity-gain bandwidth provides ample margin for temperature, pressure, and position sensors with relatively slow signals. Designers should still confirm the input common-mode range and output swing against the sensor excitation voltage before finalizing the circuit.

🌐

Wheatstone Bridge Instrumentation

The LM2902N/NOPB can form the input and output stages of a bridge-measurement circuit, where small differential sensor voltages must be amplified accurately. Its four independent channels allow a bridge amplifier, gain stage, filter, and output buffer to share one 14-pin PDIP package. The 1 MHz unity-gain bandwidth is much higher than required by many resistive temperature, strain, and pressure elements, helping preserve bandwidth for filtering and response time. The real limitation is input offset and common-mode behavior, which must be checked for the bridge excitation and sensor-ground arrangement used in the final instrumentation design.

🎧

Active Audio Preamplification

The LM2902N/NOPB can implement low-frequency audio preamplifier and active-filter stages using its four independent amplifiers. A useful arrangement assigns separate channels to input gain, frequency shaping, output buffering, and a second audio path, reducing the number of packages on a mixer or line-level board. Its 1 MHz bandwidth is substantially above the 20 kHz audio band, while the approximately 0.5 V/µs slew rate supports clean handling of moderate signal amplitudes. The through-hole PDIP format is particularly convenient for prototypes and educational equipment, although output-current capability and output swing should be checked against headphone or line-driver loads.

🚗

Automotive Control Interfaces

The LM2902N/NOPB can support low-frequency control and interface circuits in automotive equipment because it combines four independent channels with a 26 V maximum supply rating and an operating range of -40 °C to 85 °C. The device is suited to actuator feedback, switch-condition conditioning, and general analog control blocks when the system remains below its electrical limits. The quad arrangement reduces board area compared with four single amplifiers. Automotive qualification status and exact transient requirements should be confirmed for the chosen ordering code, while PCB layout should keep this through-hole device away from high-current switching paths and severe temperature gradients.

⚡

12V and 24V Control Loops

The LM2902N/NOPB is a practical choice for error amplifiers and servo loops running from nominal 12 V or 24 V industrial supplies, as long as transient voltage remains within the 26 V maximum. Its internally compensated amplifiers simplify implementation of proportional-integral control loops, and four channels allow one controller plus three auxiliary analog functions on the same board. The 1 MHz bandwidth allows proportional loops far beyond ordinary process-control dynamics. Designers should add supply filtering and reverse-polarity protection at the board level, account for op-amp input offset, and verify common-mode behavior around the sensor and actuator voltage range.

🔧

General Comparator and Threshold Circuit

Each LM2902N/NOPB amplifier can operate as a comparator when its feedback path introduces positive feedback, allowing four independent threshold channels in one package. Such circuits can monitor supply rails, sensor outputs, or resistor-divider crossings and drive logic or relay-control stages. The 3 V to 26 V operating range is useful for higher-voltage industrial thresholds, while the four-channel arrangement reduces component count. Because the same amplifier is not a dedicated open-collector comparator, the design must account for push-pull output behavior, input offset, output saturation, and propagation delay rather than assuming ideal comparator behavior.

What are the key specifications of LM2902N/NOPB that engineers should know?
The LM2902N/NOPB is a Texas Instruments quad general-purpose operational amplifier with four independent channels, a 3 V to 26 V supply range, 1 MHz unity-gain bandwidth, approximately 0.5 V/µs slew rate, and internal frequency compensation. According to the Texas Instruments LM2902-N product page, the device is packaged as a 14-pin PDIP and is specified from -40 °C to 85 °C. These characteristics make it appropriate for low-frequency industrial control, sensor interfaces, audio amplification, filtering, and general analog signal conditioning.
Where can I download the LM2902N/NOPB datasheet PDF?
The official LM2902-N documentation is available from the Texas Instruments product page at https://www.ti.com/product/LM2902-N, where the manufacturer provides the LM2902-N data sheet and ordering information. The page also links directly to the LM2902N/NOPB ordering entry. Use the manufacturer PDF for the definitive pin description, electrical limits, typical-performance curves, and application guidance before finalizing a high-voltage or precision analog circuit.
What is the LM2902N/NOPB pinout?
The LM2902N/NOPB uses the conventional 14-pin PDIP quad-op-amp arrangement: pins 1 and 7 are outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pins 4 and 11 are supply rails, pins 9 and 13 are inverting inputs, and pins 10 and 12 are non-inverting inputs. Pin 8 is output 3 and pin 14 is output 4. Confirm signal names and ratings against the pin-description table in the Texas Instruments LM2902-N datasheet.
Can LM2902N/NOPB operate from a single 5 V supply?
Yes, the LM2902N/NOPB can operate from a single 5 V supply because its stated operating range is 3 V to 26 V. The 5 V rail remains comfortably below the 26 V maximum. Although the device can operate from 3 V, the usable input and output swing remains constrained by the internal transistor structure and common-mode limits, so those limits must be checked against the signal being amplified.
What is the difference between LM2902N/NOPB and LM2902N?
LM2902N/NOPB is the complete Texas Instruments orderable identifier for the 14-pin PDIP LM2902-N device, while LM2902N is commonly used as the abbreviated base name. The legacy TI order code LM2902N/PB identifies the same 14-pin PDIP device family and can serve as a drop-in ordering option when its lead-free and ordering conditions satisfy the design. Use the exact manufacturer ordering table to confirm package, temperature range, and status.
What is the best drop-in replacement for LM2902N/NOPB?
The STMicroelectronics LM2902N is the closest cross-manufacturer drop-in candidate because it is also a general-purpose quad amplifier in a 14-pin DIP package, with the same 26 V class of supply operation. The onsemi and NXP LM2902N devices are additional 14-pin-DIP options identified by the LM2902 equivalent cross-reference information. Verify input offset, bias current, output swing, noise, and operating-temperature limits against the manufacturer datasheet before production substitution.
Is the STMicroelectronics LM2902N the same as LM2902N/NOPB?
The STMicroelectronics LM2902N is a pin-compatible alternative, but it is not the same manufacturer orderable part as the Texas Instruments LM2902N/NOPB. Both are described as quad general-purpose operational amplifiers in 14-pin DIP packages, allowing board-level substitution with appropriate qualification. Before replacing one with the other, compare common-mode range, output swing, offset voltage, bias current, noise, supply current, slew rate, and temperature limits.
LM2902N/NOPB vs LM324N - which is better for industrial control?
Choose the LM2902N/NOPB when the design needs the LM2902 family’s 26 V supply rating and -40 °C to 85 °C operating specification. The LM324 family is closely related, but it supports a 36 V class of supply operation, so it can be preferable when higher supply headroom matters. Because both devices can use a compatible 14-pin operational-amplifier footprint, verify exact pin assignments and electrical limits rather than assuming every behavior is identical.
When should I choose LM2902N/NOPB over LM2902N/PB?
Choose LM2902N/NOPB when the purchasing system requires TI’s standard /NOPB order code and when its documented packaging and lead-free conditions meet the project requirements. LM2902N/PB is an older TI order code for the same 14-pin PDIP amplifier family and can be useful as a drop-in source when the /NOPB code is unavailable. Review the manufacturer ordering information and current lifecycle designation for the exact code before procurement.
Is LM2902N/NOPB suitable for sensor and bridge applications?
The LM2902N/NOPB is suitable for many low-frequency sensor and bridge interfaces because it provides four independent, internally compensated amplifiers, a 1 MHz unity-gain bandwidth, and operation from a single supply up to 26 V. Its 14-pin PDIP package simplifies through-hole prototyping. The important qualification is bandwidth and input-offset performance: confirm the sensor bandwidth, required accuracy, output swing, and common-mode range before selecting the amplifier.
How should I design the power and layout for LM2902N/NOPB?
Place a local supply-bypass capacitor close to the positive supply pin, connect the negative supply pin to a low-impedance ground return, and keep sensitive input traces away from switching nodes and output pins. Because the device supports up to 26 V, verify the complete power-supply tolerance rather than relying on a nominal 12 V or 24 V value. The Texas Instruments datasheet should be used to confirm absolute maximum voltage, input common-mode limits, and output-current limits.
Where can I buy LM2902N/NOPB online and what is its price?
Use the Request a Quote form on this page to request LM2902N/NOPB pricing, current stock, minimum order quantity, and production lead time. The quote workflow keeps commercial terms aligned with the exact Texas Instruments 14-pin PDIP order code and avoids confusion with similarly named LM2902 variants in surface-mount packages. Submit the required quantity and target delivery date for a current quotation.
Is LM2902N/NOPB in stock and what is the lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page. The order code must be submitted exactly as LM2902N/NOPB, including the 14-pin PDIP package and manufacturer suffix, because abbreviated names such as LM2902N may refer to multiple legacy ordering codes. Include your required quantity, delivery date, and approved-vendor requirements with the request.
What is the price of LM2902N/NOPB?
A current quotation for LM2902N/NOPB is available through the Request a Quote form on this page. Submit the required quantity and target delivery date so the order can be evaluated against the exact Texas Instruments MPN, 14-pin PDIP package, and current procurement status. Do not substitute a surface-mount LM2902M or LM2902D price because those parts use a different package and footprint.
What are common LM2902N/NOPB application circuits?
Common LM2902N/NOPB circuits include transimpedance-style sensor amplifiers, Wheatstone-bridge instrumentation stages, active filters, audio preamplifiers, comparators with positive feedback, voltage followers, and general control-loop amplifiers. The four channels can operate independently, which is useful in multi-axis sensing or multi-stage analog conditioning. Texas Instruments describes the device as four independent, high-gain, internally frequency-compensated amplifiers, supporting these standard analog building blocks.

के लिए इंजीनियरिंग संदर्भ डेटा LM2902N/NOPB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose LM2902N/NOPB when the board requires four general-purpose amplifiers, a 14-pin PDIP footprint, and operation from a single supply up to 26 V. It is a practical fit for industrial sensor conditioning, control loops, audio preamplification, threshold circuits, and through-hole prototypes. The STMicroelectronics, onsemi, and NXP LM2902N devices are practical second-source choices when their manufacturer-specific offset, bias-current, noise, output-current, and temperature limits pass qualification. Use the legacy Texas Instruments LM2902N or LM2902N/PB code when procurement documentation or an existing approved BOM calls for that exact order code. For designs requiring more than 26 V supply headroom, evaluate the related 36 V-class LM324 family instead of forcing the LM2902N/NOPB beyond its rating. For compact surface-mount production, move to an LM2902 surface-mount order code and redesign the footprint rather than attempting a direct mechanical substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LM2902N LM2902N/PB LM2902N LM2902N LM2902N
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments STMicroelectronics onsemi NXP Semiconductors
Amplifier Count 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Mounting Style Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

मुख्य विशेषताएँ

  • Four independent general-purpose amplifiers in one through-hole package (बनामLM324AN/PB)
  • Same 14-pin PDIP footprint as the principal second-source LM2902N (बनामSTMicroelectronics LM2902N)
  • Standard TI order code with a 1 MHz bandwidth (बनामLM2902N/PB)
  • Operation extends from -40 °C to 85 °C (बनामLM324AN/PB)

डिज़ाइन नोट्स

Place a high-frequency bypass capacitor and a bulk capacitor close to the supply pins, with the short return path connected directly to the ground pin. Although the LM2902N/NOPB is specified for single-supply operation from 3 V to 26 V, board transients can exceed the nominal rail. Validate the maximum supply tolerance, startup behavior, and output load current against the manufacturer electrical-characteristics table before selecting capacitor voltage ratings.

Route the four non-inverting inputs and four inverting inputs as short, quiet traces away from supply switching nodes, relay contacts, and the amplifier outputs. The PDIP footprint makes prototype wiring straightforward, but long breadboard or flying-lead connections can increase oscillation risk. Keep feedback components close to their associated amplifier pins, use a solid ground reference, and avoid placing long output routes adjacent to high-impedance sensor inputs.

Do not treat the 26 V maximum supply rating as permission to exceed the input common-mode range. Check that signals remain within the permitted input range and that output swing supports the required load at the selected supply voltage. If an amplifier is used as a comparator, configure positive feedback and account for push-pull output saturation. Unused amplifier channels should be tied to a defined potential rather than left floating.

For circuits adjacent to motors, relays, or switching regulators, reserve filtering for each affected analog channel rather than relying only on one common supply filter. Add series resistance at connector inputs when source impedance permits, clamp exposed inputs against ESD events, and keep the supply return path away from high-current switching currents. The quad package reduces board area, but four active channels can increase the importance of separating their return currents and ground references.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The /NOPB order suffix identifies a no-PB ordering option, but RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status were not stated in the cited product listings and require confirmation from the manufacturer.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

lm2902n nopb lm2902n datasheet lm2902n equivalent lm2902n datasheet pdf lm2902n circuits lm2902n pdf LM2902N/NOPB pinout LM2902N/NOPB 14-pin PDIP LM2902N/NOPB replacement LM2902N/NOPB Texas Instruments LM2902N/NOPB price LM2902N/NOPB stock LM2902N/NOPB vs LM324 LM2902N/NOPB application circuit

संबंधित कंपोनेंट्स और शब्द

Texas Instruments LM2902N/NOPB LM2902N LM2902N/PB STMicroelectronics onsemi NXP Semiconductors LM324 operational amplifier quad operational amplifier analog signal-processing IC linear integrated circuit single-supply amplifier 14-pin PDIP PDIP package family through-hole package surface mount unity-gain bandwidth slew rate internally frequency compensated common-mode voltage industrial control sensor signal conditioning Wheatstone bridge audio preamplifier
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें