LM2904VQPWRG4 - Dual 30 V 700 kHz Amp | Texas Instruments
MPN: LM2904VQPWRG4 ✓ सक्रियLM2904VQPWRG4 अवलोकन
An operational amplifier is a high-gain, analog signal-processing component that compares two input voltages and drives its output to reflect their difference. The LM2904V family belongs to the operational-amplifier hierarchy within analog amplifiers and broader integrated-circuit signal conditioning. This dual-device arrangement supports independent inverting, noninverting, summing, filtering, comparison, and feedback-amplifier configurations without requiring two separate packages.
The LM2904VQPWRG4 provides a 30 V maximum supply rating and operates across a -40°C to 125°C temperature range. Its 700 kHz gain-bandwidth product makes it appropriate for general-purpose signal paths with moderate bandwidth requirements. The manufacturer also identifies a low typical supply-current drain of 0.7 mA and a common-mode input range that includes ground, which is useful for sensing signals near the lower supply rail.
Each channel uses independent, frequency-compensated architecture. This arrangement lets one amplifier process a low-level sensor signal while the second handles a separate control, buffer, or gain stage. The 8-pin TSSOP package reduces board area compared with two individual single-amplifier packages, although users still need to observe normal operational-amplifier stability rules when driving capacitive loads or operating with unusual noise-gain configurations.
Typical applications include industrial sensor interfaces, low-frequency active filters, transimpedance stages, audio preamplifiers, loop-control blocks, and general instrumentation. The common-mode range including ground supports rail-adjacent sensing, while the extended temperature range permits use in industrial and automotive-style control environments when the application satisfies the device's complete electrical and qualification requirements.
Designers should verify input and output voltage limits against the selected supply arrangement, provide adequate bypass capacitance near the supply pins, and confirm stable operation at the intended gain and load. The exact pin functions and recommended application circuit should be taken from the manufacturer pin-description table before assigning PCB tracks.
This product overview combines the LM2904VQPWRG4 device identity, manufacturer specifications, packaging details, comparison context, and practical implementation guidance to support faster component selection and board-level implementation.
के लिए ड्रॉप-इन विकल्प LM2904VQPWRG4 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
LM2904VPWR
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LM2904VQPWRG4 Maximum Ratings और Electrical Characteristics
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Circuits | 2 circuits |
| Number of Amplifiers | 2 amplifiers |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 700 kHz |
| ऑपरेटिंग तापमान रेंज | -40°C to +125°C |
| Typical Supply-Current Drain | 0.7 mA |
| Common-Mode Input Range | Includes ground |
| Compensation | Internally frequency compensated |
| Channel Independence | Two independent amplifiers |
| पैकेज | 8-TSSOP |
| Total Pins | 8 pins |
| माउंटिंग प्रकार | Surface mount |
LM2904VQPWRG4 8-tssop पिन कॉन्फ़िगरेशन गाइड
LM2904VQPWRG4 (8-tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LM2904VQPWRG4.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LM2904VQPWRG4 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Signal Conditioning, Active Filter and Control Loops, Audio Preamplifier and Buffer, Transimpedance Amplifier, Power Supply and Voltage Monitoring, Instrumentation and Test Equipment.
Industrial Sensor Signal Conditioning
The LM2904VQPWRG4 fits low-level industrial sensor interfaces because each channel combines a 700 kHz gain-bandwidth product with a common-mode input range that includes ground. Place one amplifier in a non-inverting or differential input stage and use the second channel for filtering or a buffer when required. The 30 V maximum supply rating provides more biasing headroom than the 26 V LM2904 family, while the -40°C to 125°C range supports controlled industrial equipment. Confirm the sensor output, noise requirements, grounding strategy, and maximum signal excursion before finalizing the gain network.
अनुशंसित
Active Filter and Control Loops
The two independent channels in LM2904VQPWRG4 support active filters and moderate-bandwidth control loops without adding a second amplifier package. Its 700 kHz gain-bandwidth product gives useful closed-loop response for low-frequency filter and servo functions, while the 30 V supply rating allows more output and common-mode design range than the standard LM2904. Configure each channel for its intended closed-loop gain and account for noise gain, phase margin, and output loading. Stable power-supply bypassing close to the device is important for repeatable analog performance.
अनुशंसित
Audio Preamplifier and Buffer
LM2904VQPWRG4 can serve as a general-purpose audio preamplifier or impedance buffer when its 700 kHz bandwidth covers the intended signal range. One channel may amplify an instrument or microphone-level signal while the other provides gain or buffering for a subsequent stage. The common-mode input range including ground is helpful for small bipolar signals, and the dual 8-pin TSSOP package simplifies board allocation. Verify source impedance, output load, input bias-current error, output swing, and the bandwidth required by the complete audio chain.
अनुशंसित
Transimpedance Amplifier
The LM2904VQPWRG4 is applicable to moderate-bandwidth transimpedance stages where the source is a photodiode or another current-producing sensor. Its two independent channels allow one amplifier to perform conversion while the second supports filtering, bias compensation, or monitoring. The common-mode input range including ground supports sensing close to the lower supply rail, and the 30 V maximum supply rating offers more biasing flexibility than the 26 V LM2904 family. Check capacitance at the input node, feedback stability, available signal bandwidth, and output saturation limits.
अनुशंसित
Power Supply and Voltage Monitoring
LM2904VQPWRG4 can monitor a power rail when its input and output operating regions are kept within the device limits. The 30 V supply rating is useful in industrial systems with wider transient headroom, while the common-mode input range including ground supports monitoring near zero volts. One channel may amplify a divided feedback signal and the other may monitor another rail or serve as a buffer. Confirm the maximum input and output voltages, input protection requirements, resistor tolerance, and the transient behavior of the monitored rail.
अनुशंसित
Instrumentation and Test Equipment
The dual-channel architecture and 8-pin TSSOP package of LM2904VQPWRG4 are useful in compact instrumentation front ends. Its 700 kHz gain-bandwidth product supports moderate-speed measurement and control paths, while the -40°C to 125°C range supports temperature-diverse equipment. The two amplifiers can handle separate input channels or serve as gain and buffer stages. For accurate measurements, account for input offset, bias current, output impedance, common-mode error, noise, and the required settling time; validate the complete channel rather than relying on bandwidth alone.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LM2904VQPWRG4 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LM2904VPWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-TSSOP | 8-TSSOP |
| Maximum Supply Voltage | 30 V | 26 V |
| Gain-Bandwidth Product | 700 kHz | 700 kHz |
| Number of Circuits | 2 circuits | 2 circuits |
मुख्य विशेषताएँ
- Higher maximum supply rating within the same dual TSSOP family (बनामLM2904VPWR)
- Documented extended-temperature operation (बनामLM2904VPWR)
- Dual independent channels in one compact package (बनामLM2904VPWR)
डिज़ाइन नोट्स
Keep the total supply voltage at or below 30 V and verify the individual input and output limits from the manufacturer datasheet under the intended single- or dual-supply configuration. The LM2904V's greater supply headroom compared with the 26 V LM2904 does not permit the amplifier outputs to reach every supply rail. Use local supply bypassing and route the return current directly to the device ground pin to reduce supply noise at the analog input.
Place the input, feedback, and bypass components close to their associated LM2904VQPWRG4 pins to minimize parasitic capacitance and feedback-loop area. Maintain a direct ground path from the device ground pin to the analog ground reference rather than routing sensitive return current through a long loop. Because the 8-pin TSSOP has closely spaced leads, follow the manufacturer land pattern and verify the pin-1 orientation against the PCB footprint before assembly.
Do not treat every dual operational amplifier as a guaranteed drop-in replacement. Confirm the 8-pin TSSOP footprint, channel pin assignment, input common-mode range, output swing, supply rating, and operating temperature for each candidate. LM2904VPWR may serve as a same-brand starting point, but its 26 V maximum supply rating is below the 30 V LM2904V rating. Also avoid adding excessive output capacitance or operating at noise-gain values that reduce stability without an isolation resistor.
अनुपालन जानकारी
The G4 ordering suffix identifies a Texas Instruments catalog variant, but the available manufacturer and distributor records do not explicitly state the individual compliance results. Verify RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations for the exact orderable MPN before release.