Texas Instruments

LM2904VQPWRG4 - Dual 30 V 700 kHz Amp | Texas Instruments

N.º da peça: LM2904VQPWRG4 ✓ Ativo
30 V Vdss 0.7 mA Id 8-TSSOP Package
MOQ: 1 |

LM2904VQPWRG4 Visão geral

The Texas Instruments LM2904VQPWRG4 is a dual general-purpose operational amplifier with two independent, internally frequency-compensated amplifiers, a maximum supply rating of 30 V, and 700 kHz gain-bandwidth product. Each amplifier is supplied in an 8-pin TSSOP package, allowing both channels to be placed on one compact surface-mount device.

An operational amplifier is a high-gain, analog signal-processing component that compares two input voltages and drives its output to reflect their difference. The LM2904V family belongs to the operational-amplifier hierarchy within analog amplifiers and broader integrated-circuit signal conditioning. This dual-device arrangement supports independent inverting, noninverting, summing, filtering, comparison, and feedback-amplifier configurations without requiring two separate packages.

The LM2904VQPWRG4 provides a 30 V maximum supply rating and operates across a -40°C to 125°C temperature range. Its 700 kHz gain-bandwidth product makes it appropriate for general-purpose signal paths with moderate bandwidth requirements. The manufacturer also identifies a low typical supply-current drain of 0.7 mA and a common-mode input range that includes ground, which is useful for sensing signals near the lower supply rail.

Each channel uses independent, frequency-compensated architecture. This arrangement lets one amplifier process a low-level sensor signal while the second handles a separate control, buffer, or gain stage. The 8-pin TSSOP package reduces board area compared with two individual single-amplifier packages, although users still need to observe normal operational-amplifier stability rules when driving capacitive loads or operating with unusual noise-gain configurations.

Typical applications include industrial sensor interfaces, low-frequency active filters, transimpedance stages, audio preamplifiers, loop-control blocks, and general instrumentation. The common-mode range including ground supports rail-adjacent sensing, while the extended temperature range permits use in industrial and automotive-style control environments when the application satisfies the device's complete electrical and qualification requirements.

Designers should verify input and output voltage limits against the selected supply arrangement, provide adequate bypass capacitance near the supply pins, and confirm stable operation at the intended gain and load. The exact pin functions and recommended application circuit should be taken from the manufacturer pin-description table before assigning PCB tracks.

This product overview combines the LM2904VQPWRG4 device identity, manufacturer specifications, packaging details, comparison context, and practical implementation guidance to support faster component selection and board-level implementation.

Alternativas drop-in para LM2904VQPWRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

LM2904VPWR

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-TSSOP
Standard LM2904 family has a 26 V maximum supply rating versus 30 V for LM2904V, a 15.4% reduction, while retaining the same 700 kHz gain-bandwidth class.

📋 Alternativa de referência (fora do catálogo)

LM2904VQPWRG4 Classificações máximas e características elétricas

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Number of Amplifiers 2 amplifiers
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 700 kHz
Faixa de temperatura de operação -40°C to +125°C
Typical Supply-Current Drain 0.7 mA
Common-Mode Input Range Includes ground
Compensation Internally frequency compensated
Channel Independence Two independent amplifiers
Encapsulamento 8-TSSOP
Total Pins 8 pins
Tipo de montagem Surface mount

Guia de Configuração de Pinos do LM2904VQPWRG4 8-tssop

Configuração de pinos para LM2904VQPWRG4 (pacote 8-tssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-tssop para LM2904VQPWRG4

Nenhum dado detalhado de pinagem disponível para LM2904VQPWRG4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

LM2904VQPWRG4 é adequado para 6 aplicaçãos: Industrial Sensor Signal Conditioning, Active Filter and Control Loops, Audio Preamplifier and Buffer, Transimpedance Amplifier, Power Supply and Voltage Monitoring, Instrumentation and Test Equipment.

🏭

Industrial Sensor Signal Conditioning

The LM2904VQPWRG4 fits low-level industrial sensor interfaces because each channel combines a 700 kHz gain-bandwidth product with a common-mode input range that includes ground. Place one amplifier in a non-inverting or differential input stage and use the second channel for filtering or a buffer when required. The 30 V maximum supply rating provides more biasing headroom than the 26 V LM2904 family, while the -40°C to 125°C range supports controlled industrial equipment. Confirm the sensor output, noise requirements, grounding strategy, and maximum signal excursion before finalizing the gain network.

🔧

Active Filter and Control Loops

The two independent channels in LM2904VQPWRG4 support active filters and moderate-bandwidth control loops without adding a second amplifier package. Its 700 kHz gain-bandwidth product gives useful closed-loop response for low-frequency filter and servo functions, while the 30 V supply rating allows more output and common-mode design range than the standard LM2904. Configure each channel for its intended closed-loop gain and account for noise gain, phase margin, and output loading. Stable power-supply bypassing close to the device is important for repeatable analog performance.

🎧

Audio Preamplifier and Buffer

LM2904VQPWRG4 can serve as a general-purpose audio preamplifier or impedance buffer when its 700 kHz bandwidth covers the intended signal range. One channel may amplify an instrument or microphone-level signal while the other provides gain or buffering for a subsequent stage. The common-mode input range including ground is helpful for small bipolar signals, and the dual 8-pin TSSOP package simplifies board allocation. Verify source impedance, output load, input bias-current error, output swing, and the bandwidth required by the complete audio chain.

📷

Transimpedance Amplifier

The LM2904VQPWRG4 is applicable to moderate-bandwidth transimpedance stages where the source is a photodiode or another current-producing sensor. Its two independent channels allow one amplifier to perform conversion while the second supports filtering, bias compensation, or monitoring. The common-mode input range including ground supports sensing close to the lower supply rail, and the 30 V maximum supply rating offers more biasing flexibility than the 26 V LM2904 family. Check capacitance at the input node, feedback stability, available signal bandwidth, and output saturation limits.

⚡

Power Supply and Voltage Monitoring

LM2904VQPWRG4 can monitor a power rail when its input and output operating regions are kept within the device limits. The 30 V supply rating is useful in industrial systems with wider transient headroom, while the common-mode input range including ground supports monitoring near zero volts. One channel may amplify a divided feedback signal and the other may monitor another rail or serve as a buffer. Confirm the maximum input and output voltages, input protection requirements, resistor tolerance, and the transient behavior of the monitored rail.

📺

Instrumentation and Test Equipment

The dual-channel architecture and 8-pin TSSOP package of LM2904VQPWRG4 are useful in compact instrumentation front ends. Its 700 kHz gain-bandwidth product supports moderate-speed measurement and control paths, while the -40°C to 125°C range supports temperature-diverse equipment. The two amplifiers can handle separate input channels or serve as gain and buffer stages. For accurate measurements, account for input offset, bias current, output impedance, common-mode error, noise, and the required settling time; validate the complete channel rather than relying on bandwidth alone.

Resumo dos produtos recomendados

LM2904V Same-family dual operational amplifier Usado em: Industrial Sensor Signal Conditioning, Active Filter and Control Loops, Audio Preamplifier and Buffer, Transimpedance Amplifier, Power Supply and Voltage Monitoring, Instrumentation and Test Equipment LM2904VQPWRG4 Texas Instruments Usado em: Industrial Sensor Signal Conditioning, Active Filter and Control Loops, Audio Preamplifier and Buffer, Transimpedance Amplifier, Power Supply and Voltage Monitoring, Instrumentation and Test Equipment
What are the key specifications of LM2904VQPWRG4 that engineers should know?
The LM2904VQPWRG4 is a dual general-purpose operational amplifier with a 30 V maximum supply rating, 700 kHz gain-bandwidth product, and an 8-pin TSSOP package. According to the Texas Instruments LM2904V product page, it contains two independent, internally frequency-compensated amplifiers and supports operation from -40°C to 125°C. Its typical supply-current drain is 0.7 mA, while the common-mode input range includes ground. These characteristics make it suitable for industrial instrumentation, sensor interfaces, filtering, buffering, and low-frequency control circuits.
What is the operating voltage of LM2904VQPWRG4?
The LM2904VQPWRG4 supports single or split supply operation within a maximum total supply rating of 30 V. The Texas Instruments LM2904V product page identifies the LM2904V as a dual, 30 V operational amplifier, distinguishing it from the 26 V LM2904 family. Actual usable input, output, and common-mode voltages still depend on the selected supply configuration. Designers must also verify that the input and output voltages remain inside the limits shown in the manufacturer datasheet.
What is the gain-bandwidth product of LM2904VQPWRG4?
The LM2904VQPWRG4 has a 700 kHz gain-bandwidth product. According to the Texas Instruments LM2904V product page, this bandwidth supports general-purpose analog signal processing at moderate frequencies. Gain-bandwidth product is one of the main indicators of how quickly an internally compensated operational amplifier can respond to changes in differential input voltage. Actual closed-loop bandwidth will also depend on the selected feedback network, noise gain, output loading, and the required closed-loop gain.
Where can I download the LM2904VQPWRG4 datasheet PDF?
The official LM2904VQPWRG4 documentation is available through the Texas Instruments LM2904V product page at https://www.ti.com/product/LM2904V. From that page, engineers can open the manufacturer datasheet and ordering information. The component is the G4 ordering variant of the LM2904V in an 8-pin TSSOP package. Use the pin-description table, electrical characteristics, and recommended application circuit in the manufacturer PDF when assigning PCB connections and validating the design.
Where can I find the LM2904VQPWRG4 pinout?
The LM2904VQPWRG4 pinout is located in the pin-configuration section of the Texas Instruments LM2904V datasheet. The device uses an 8-pin TSSOP package containing two independent operational-amplifier channels. Before routing a board, identify each amplifier's input, output, and supply pins from the manufacturer pin-description table and follow the package's counter-clockwise numbering convention. The exact pin assignments are intentionally not paraphrased here because package drawings and ordering variants must be checked directly against the official document.
Where can I buy LM2904VQPWRG4 online?
XAIPART provides a Request a Quote form on this page for LM2904VQPWRG4 ordering and sourcing inquiries. Submit the exact MPN, required quantity, target package format, and delivery location so the current commercial response can be prepared. The identified device is the Texas Instruments LM2904VQPWRG4 in an 8-pin TSSOP package. Buyers should not approve an order until the quotation confirms the exact suffix, quantity, and delivery terms.
What is the price of LM2904VQPWRG4?
The current commercial price for LM2904VQPWRG4 should be obtained through the Request a Quote form on this page. The form captures the exact Texas Instruments MPN and requested volume, allowing the commercial response to reflect current channel conditions rather than a static figure that may become outdated. For design planning, evaluate the 8-pin TSSOP footprint, dual-amplifier functionality, supply requirements, and expected production volume before finalizing the bill of materials.
What is the lead time for LM2904VQPWRG4?
The current lead time for LM2904VQPWRG4 should be requested through the Request a Quote form on this page. Include the required order quantity, ship-to location, and target delivery date in the request. For schedule planning, distinguish component lead time from manufacturing and assembly time, and confirm whether any safety stock is required for long-running industrial programs. The exact Texas Instruments ordering code and TSSOP package format should be stated in the request.
Is LM2904VQPWRG4 in stock?
Current inventory for LM2904VQPWRG4 should be confirmed through the Request a Quote form on this page. A quotation response can identify available quantity and the proposed delivery schedule for the exact 8-pin TSSOP ordering variant. Do not infer production availability solely from a catalog listing, because component inventory can change with demand and regional allocation. For safety-critical or long-life programs, request a supply plan that covers both initial build quantity and planned maintenance demand.
What is the difference between LM2904 and LM2904V?
The principal documented difference is the maximum supply rating: Texas Instruments describes LM2904 as a dual, 26 V, 700 kHz operational amplifier and LM2904V as a dual, 30 V, 700 kHz operational amplifier. The LM2904V also has an operating range of -40°C to 125°C. Package choice and exact ordering suffix must be checked separately because the family is offered in multiple package options. Choose LM2904V when the wider 30 V supply rating provides useful design margin.
LM2904VQPWRG4 vs LM2904VQPWR - what changes between the order codes?
LM2904VQPWRG4 and LM2904VQPWR identify closely related Texas Instruments LM2904V catalog entries, but the ordering suffixes should be reconciled against the manufacturer product page and label before interchange. The verified product information establishes the G4 part as a dual, 30 V, 700 kHz amplifier in an 8-pin TSSOP package. Because G4 and the non-G4 ordering code can represent commercial, environmental, or packing distinctions, engineers should confirm the exact suffix, marking, and tape-and-reel configuration rather than treating the codes as unconditionally interchangeable.
When should I choose LM2904VQPWRG4 over a lower-voltage LM2904 variant?
Choose LM2904VQPWRG4 when a design benefits from the LM2904V family's 30 V maximum supply rating while retaining a practical 700 kHz gain-bandwidth product. It is also appropriate when the intended environment spans the documented -40°C to 125°C operating range. Compared with the 26 V LM2904 family, the extra supply headroom can simplify input or output biasing around higher rail voltages. Selection still requires checking common-mode limits, output swing, load capability, and stability at the chosen gain.
Is LM2904VQPWRG4 suitable for industrial sensor interfaces?
Yes, LM2904VQPWRG4 is suitable for many industrial sensor-interface and signal-conditioning applications. Its -40°C to 125°C operating range, 30 V maximum supply rating, 700 kHz gain-bandwidth product, and common-mode input range that includes ground support low-level sensor amplification near the lower rail. The two independent channels can implement separate input stages, filters, or buffers. Engineers should still verify sensor output range, required gain, noise behavior, supply ripple, and output loading against the application.
What can replace LM2904VQPWRG4 as a drop-in part?
No additional drop-in replacement can be responsibly confirmed from the available manufacturer and cross-reference records. A valid drop-in candidate must use the same 8-pin TSSOP footprint, preserve the pin functions, and remain within the target's key electrical ratings, including the 30 V supply class and 700 kHz bandwidth. The LM2904VPWR family member may be a same-brand, same-package starting point, but it should be checked against ordering, temperature, and electrical requirements before substitution. Use a Request a Quote form for sourcing the exact replacement or the target.
Is there a verified cross-brand drop-in equivalent for LM2904VQPWRG4?
No cross-brand drop-in equivalent is verified here. Cross-reference listings identify LM2904 alternatives generally, but they do not establish that a named competitor uses the same 8-pin TSSOP pinout and satisfies the LM2904VQPWRG4's 30 V and 700 kHz electrical requirements. A functional substitute is not automatically a PCB drop-in. Before redesigning a production board, compare the manufacturer pinout, common-mode range, output swing, bias current, offset voltage, supply current, noise, and operating temperature range for the specific candidate.

Dados de referência de engenharia para LM2904VQPWRG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose LM2904VQPWRG4 when the design benefits from the 30 V maximum supply rating, 700 kHz gain-bandwidth product, and -40°C to 125°C operating range of the LM2904V family. It is well suited to industrial sensor interfaces, active filters, audio preamplification, transimpedance stages, rail monitoring, and compact instrumentation using two independent channels. Choose LM2904VPWR only when its lower 26 V supply ceiling is acceptable and the complete electrical characteristics and ordering details have been checked. The same-family relationship does not remove the need to verify common-mode range, output swing, offset, bias current, stability, and temperature limits. For cross-brand substitutions, require an exact 8-pin TSSOP footprint, identical pin functions, and acceptable electrical performance rather than relying only on the broad description “dual operational amplifier.”

Comparação com alternativas

Parâmetro Este produto LM2904VPWR
Brand Texas Instruments Texas Instruments
Package 8-TSSOP 8-TSSOP
Maximum Supply Voltage 30 V 26 V
Gain-Bandwidth Product 700 kHz 700 kHz
Number of Circuits 2 circuits 2 circuits

Principais diferenciais

  • Higher maximum supply rating within the same dual TSSOP family (vs LM2904VPWR)
  • Documented extended-temperature operation (vs LM2904VPWR)
  • Dual independent channels in one compact package (vs LM2904VPWR)

Notas de projeto

Keep the total supply voltage at or below 30 V and verify the individual input and output limits from the manufacturer datasheet under the intended single- or dual-supply configuration. The LM2904V's greater supply headroom compared with the 26 V LM2904 does not permit the amplifier outputs to reach every supply rail. Use local supply bypassing and route the return current directly to the device ground pin to reduce supply noise at the analog input.

Place the input, feedback, and bypass components close to their associated LM2904VQPWRG4 pins to minimize parasitic capacitance and feedback-loop area. Maintain a direct ground path from the device ground pin to the analog ground reference rather than routing sensitive return current through a long loop. Because the 8-pin TSSOP has closely spaced leads, follow the manufacturer land pattern and verify the pin-1 orientation against the PCB footprint before assembly.

Do not treat every dual operational amplifier as a guaranteed drop-in replacement. Confirm the 8-pin TSSOP footprint, channel pin assignment, input common-mode range, output swing, supply rating, and operating temperature for each candidate. LM2904VPWR may serve as a same-brand starting point, but its 26 V maximum supply rating is below the 30 V LM2904V rating. Also avoid adding excessive output capacitance or operating at noise-gain values that reduce stability without an isolation resistor.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The G4 ordering suffix identifies a Texas Instruments catalog variant, but the available manufacturer and distributor records do not explicitly state the individual compliance results. Verify RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations for the exact orderable MPN before release.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

LM2904VQPWRG4 datasheet LM2904VQPWRG4 pinout LM2904VQPWRG4 datasheet pdf LM2904VQPWRG4 specifications LM2904VQPWRG4 TSSOP-8 LM2904VQPWRG4 equivalent LM2904VQPWRG4 replacement LM2904VQPWRG4 vs LM2904VPWR Texas Instruments LM2904VQPWRG4 LM2904VQPWRG4 price LM2904VQPWRG4 stock LM2904VQPWRG4 industrial sensor interface

Componentes & termos relacionados

Texas Instruments LM2904VQPWRG4 LM2904V LM2904VPWR LM2904 dual operational amplifier operational amplifier analog amplifier integrated circuit general-purpose amplifier gain-bandwidth product GBW common-mode input voltage input bias current input offset voltage single-supply operation dual-supply operation 8-pin TSSOP TSSOP package family surface-mount package SMD frequency compensation active filter transimpedance amplifier industrial instrumentation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ