ROHM Semiconductor

LM358WPT - Dual 5V 1.1MHz Op Amp | ROHM | TSSOP-8

MPN: LM358WPT ✓ सक्रिय
5 V Vdss 8-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

LM358WPT अवलोकन

The ROHM Semiconductor LM358WPT is a dual general-purpose operational amplifier with two independent, internally compensated amplifiers in an 8-pin TSSOP package. Rated for a nominal 5 V supply, it supports single-supply operation from 3 V to 36 V or split-supply operation up to plus or minus 16 V. Key characteristics include a 1.1 MHz gain-bandwidth product, approximately 800 kHz small-signal bandwidth, and a 0.3 V/us slew rate.

An operational amplifier, or op amp, is an analog signal-processing IC that amplifies the difference between two input voltages while providing high open-loop gain, negative feedback support, and output-voltage drive. The LM358WPT belongs to the hierarchy dual operational amplifier -> general-purpose amplifier -> analog amplifier IC -> semiconductor. Its common-mode input range can extend toward the negative supply rail, making it useful in single-supply sensor, audio, and control circuits.

The LM358WPT integrates two independent amplifiers, allowing one package to implement stereo audio channels, dual-axis sensing, active filtering, or two-stage signal conditioning. Each channel uses standard industry-style pin assignments for dual op amps: two inputs, one output, and shared positive and negative supply connections. Internal compensation removes the need for external frequency-compensation components in typical closed-loop designs.

At a nominal 5 V supply, the device combines a usable gain-bandwidth product of 1.1 MHz with a 0.3 V/us slew rate. This bandwidth supports audio-frequency and general feedback-control applications rather than high-speed signal conditioning. The large operating-supply range also permits direct interfacing with higher-voltage industrial systems, subject to the input and output common-mode limits and the device's absolute maximum ratings.

Typical uses include microphone preamplification, transducers with ground-referenced outputs, loop-control systems, transducers, and general-purpose amplification. Because the output can source and sink current within the supply limits, the part also serves as an output-buffer stage when the load is not too heavy.

When designing a PCB around the LM358WPT, place bypass capacitors close to the supply pins and route sensitive input traces away from switching nodes. Keep the negative supply connection short because common-mode performance and output swing depend on a low-impedance ground reference. Check the full operating-temperature range and load-current limits in the manufacturer datasheet before using the amplifier in extended-temperature equipment.

This page consolidates package details, supply-range information, pin assignments, drop-in replacement candidates, and application guidance into a practical engineering reference. It also organizes the main design trade-offs so that engineers can compare bandwidth, supply capability, and package reuse before committing a PCB footprint.

के लिए ड्रॉप-इन विकल्प LM358WPT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM358WPT (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Package, Input Offset Voltage, Operating Temperature Range, Slew Rate.

STMicroelectronics
Amplifier Type: Dual low-power bipolar operational amplifier
इसके साथ तुलना करें LM358WPT →
Texas Instruments
Amplifier Type: General Purpose
Package: 8-SOIC (D)
Input Offset Voltage: 2 mV (typical)
इसके साथ तुलना करें LM358WPT →
Texas Instruments
Package: 8-pin micro PBGA surface-mount package
Input Offset Voltage: 3 mV maximum
Operating Temperature Range: -40°C to +85°C
इसके साथ तुलना करें LM358WPT →
STMicroelectronics
Package: SOIC-8
Input Offset Voltage: 1 mV (max)
Operating Temperature Range: -40°C to +125°C
इसके साथ तुलना करें LM358WPT →
Texas Instruments
Amplifier Type: General Purpose, Dual Channel
Package: 8-SOIC (D)
Input Offset Voltage: 1 mV (typical at 25 C)
इसके साथ तुलना करें LM358WPT →
Texas Instruments
Amplifier Type: Low-Noise Operational Amplifier
Operating Temperature Range: 0 °C to +70 °C (NE5532x commercial)
इसके साथ तुलना करें LM358WPT →

LM358BP

✅ ड्रॉप-इन
Texas Instruments
📦 TSSOP-8
Dual operational amplifier · 2 channels · Up to 36 V · 1.2 MHz · 3 mV maximum · -40°C to +85°C · 8-pin micro PBGA surface-mount package · Surface mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2904DR

✅ ड्रॉप-इन
Texas Instruments
📦 TSSOP-8
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LMV358IDT

✅ ड्रॉप-इन
STMicroelectronics
📦 TSSOP-8
2 · 2.7 V to 5.5 V · 210 µA · 1.3 MHz · 0.45 V/µs · 1 mV (max) · 250 nA (max) · 0 V to VCC - 1.1 V

✓ स्टॉक में

$0.13 / यूनिट

डेटाशीट देखें →

MC1458DR

✅ ड्रॉप-इन
Texas Instruments
📦 TSSOP-8
Texas Instruments · MC1458 · General Purpose, Dual Channel · 2 · 0.5 V/us (typical) · 1 MHz · 1 mV (typical at 25 C) · 30 nA (typical)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

NE5532AP

✅ ड्रॉप-इन
Texas Instruments
📦 TSSOP-8
Texas Instruments · NE5532AP · Low-Noise Operational Amplifier · 2 (Dual) · 8-PDIP (through-hole, 2.54 mm pitch) · ±5 V to ±15 V (max ±18 V) · 10 MHz (typ.) · 5 nV/√Hz (typ. at 1 kHz)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM358WPT Maximum Ratings और Electrical Characteristics

Number of Amplifiers 2 amplifiers
Amplifier Type General-purpose operational amplifier
Nominal Supply Voltage 5 V
Single-Supply Operating Range 3 V to 36 V
Split-Supply Operating Range +/-16 V
Gain-Bandwidth Product 1.1 MHz
Small-Signal Bandwidth 800 kHz
Slew Rate 0.3 V/us
पैकेज 8-pin TSSOP
माउंटिंग प्रकार Surface mount
Number of Inputs 4 differential inputs
आउटपुट की संख्या 2 outputs
Compensation Internally compensated

LM358WPT पिन कॉन्फ़िगरेशन

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
पिन 1 OUT A — Amplifier A output
पिन 2 IN A- — Amplifier A inverting input
पिन 3 IN A+ — Amplifier A non-inverting input
पिन 4 V- — Negative supply connection
पिन 5 IN B+ — Amplifier B non-inverting input
पिन 6 IN B- — Amplifier B inverting input
पिन 7 OUT B — Amplifier B output
पिन 8 V+ — Positive supply connection

सामान्य अनुप्रयोग

LM358WPT के लिए उपयुक्त है 6 अनुप्रयोगs: Single-Supply Sensor Signal Conditioning, Audio Preamplifier and Mixer, Industrial Feedback Control Loop, Active Filter and Integrator, Transducer Interface and Buffer, Power Supply and Voltage Monitoring.

🧩

Single-Supply Sensor Signal Conditioning

The LM358WPT suits ground-referenced sensors that need amplification before an ADC or controller input. Its 3 V to 36 V single-supply operating range supports both 5 V embedded systems and higher-voltage industrial interfaces, while the 1.1 MHz gain-bandwidth product provides ample bandwidth for slow sensor signals. Place the non-inverting input at the appropriate bias level, connect the feedback divider to the inverting input, and bypass pin 8 near the device. Because the exact input bias current and common-mode limits are application-critical for high-impedance sources, verify them in the manufacturer datasheet before finalizing the sensor interface.

🎧

Audio Preamplifier and Mixer

The two independent channels in the LM358WPT can handle microphone preamplification, tone shaping, or a small stereo mix stage in a 5 V system. Its 800 kHz small-signal bandwidth and 0.3 V/us slew rate cover audio-band signals without requiring external compensation. Connect each channel as a standard non-inverting or inverting amplifier and place the gain-setting resistors close to the relevant input pins. The main limitation is output-current capability: verify the load impedance and ensure the required peak level remains within the output-swing limits stated in the manufacturer datasheet.

🏭

Industrial Feedback Control Loop

The LM358WPT is appropriate for proportional, integral, or error-amplifier stages in low-bandwidth industrial control loops. Its dual-channel configuration allows one package to implement both the error amplifier and an output-buffer or auxiliary feedback channel. The 3 V to 36 V operating range accommodates a 5 V control board or a higher-voltage industrial interface, and the 1.1 MHz gain-bandwidth product is normally sufficient for slow control loops. Keep compensation components close to the amplifier, avoid grounding the V- pin through a long trace, and confirm stability using the selected noise gain and load capacitance.

🔧

Active Filter and Integrator

The LM358WPT can implement first-order active filters, integrators, and low-pass stages where the signal bandwidth remains well below its 1.1 MHz gain-bandwidth product. Both channels are internally compensated, reducing the component count compared with an uncompensated amplifier. Select resistor and capacitor values against the desired cutoff or time constant, and keep the non-inverting reference tied to a low-impedance bias point in single-supply operation. Pay particular attention to input bias-current error, input offset voltage, and output saturation when the filter has a high DC gain or long integration interval.

📡

Transducer Interface and Buffer

A dual LM358WPT can serve as the front-end for two resistive, capacitive, or other transducer outputs referenced close to ground. The amplifier's common-mode capability toward the negative supply is useful in single-supply systems, while the wide 3 V to 36 V supply range allows the same architecture to cover higher-voltage industrial sources. Use one channel for amplification and the other for gain adjustment or output buffering. Confirm the transducer's source impedance against the input bias current, and verify that the input and output remain inside the common-mode and swing limits at the highest expected signal level.

⚡

Power Supply and Voltage Monitoring

The LM358WPT can monitor a supply rail or scaled voltage by comparing a divided input against a reference and driving a status, limit, or feedback signal. Its nominal 5 V rating and 3 V to 36 V operating range fit both low-voltage control electronics and higher-voltage supervision circuits. Use the 1.1 MHz gain-bandwidth product for slow monitoring signals rather than fast transient capture, and account for input offset when setting the switching threshold. The device also requires attention to output-state behavior during input overvoltage, so consult the absolute maximum ratings and application guidance in the manufacturer datasheet.

What are the key specifications of LM358WPT that engineers should know?
The LM358WPT is a dual general-purpose operational amplifier in an 8-pin TSSOP package, with a nominal 5 V supply, a 1.1 MHz gain-bandwidth product, an approximately 800 kHz small-signal bandwidth, and a 0.3 V/us slew rate. According to the ROHM LM358WPT datasheet, the device operates from 3 V to 36 V on a single supply or at plus or minus 16 V on split supplies. Two independent, internally compensated amplifiers share the same package.
What is the supply voltage range of the ROHM LM358WPT?
The ROHM LM358WPT operates from 3 V to 36 V using a single supply and supports split-supply operation at plus or minus 16 V. This makes it suitable for low-voltage 5 V systems and for higher-voltage industrial interfaces when the signal levels remain inside the input common-mode range. The manufacturer datasheet is the controlling reference for absolute maximum ratings, junction temperature, and derating conditions.
Where can I download the LM358WPT datasheet PDF?
The LM358WPT datasheet PDF is available through the ROHM Semiconductor documentation listing and the indexed datasheet mirror linked on this page. Use the manufacturer document for final pin functions, electrical characteristics, recommended operating conditions, and package drawings. The listed document covers the LM358xx, LM324xx, LM2904xx, and LM2902xx monolithic dual and quad operational-amplifier families.
Where can I find the LM358WPT pinout?
The LM358WPT uses the standard dual-op-amp arrangement in an 8-pin TSSOP: pin 1 is amplifier A output, pin 2 is amplifier A inverting input, pin 3 is amplifier A non-inverting input, pin 4 is V-, pin 5 is amplifier B non-inverting input, pin 6 is amplifier B inverting input, pin 7 is amplifier B output, and pin 8 is V+. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
What can replace the LM358WPT as a drop-in part?
Compatible dual-op-amp candidates include the LM358B, LM2904, LMV358, MC1458, and NE5532, provided the selected ordering code uses the same 8-pin TSSOP footprint. Their electrical ratings are not identical, so replacement should be based on supply range, common-mode range, output swing, bandwidth, noise, and load drive. Verify the exact package suffix and confirm the pin mapping against the manufacturer datasheet.
Is LM358WPT the same as LM358N?
They are functionally related dual LM358-family amplifiers, but LM358N is normally a through-hole DIP package while LM358WPT is a surface-mount 8-pin TSSOP. The amplifier functions and standard pin roles are similar, but the PCB footprints are not interchangeable. The LM358WPT therefore requires a TSSOP land pattern, whereas LM358N requires drilled DIP holes.
Is the LM358WPT suitable for single-supply sensor applications?
Yes, the LM358WPT is suitable for many single-supply sensor-amplifier circuits because it operates from 3 V to 36 V and its input common-mode range extends toward the negative supply. A 5 V implementation can amplify a ground-referenced sensor signal with the non-inverting input biased near mid-supply. Confirm the exact input bias current and common-mode limits in the manufacturer datasheet for high-impedance sources.
How fast is the LM358WPT operational amplifier?
The LM358WPT has a nominal gain-bandwidth product of 1.1 MHz, an approximately 800 kHz small-signal bandwidth, and a 0.3 V/us slew rate. These figures make it suitable for audio-band and general closed-loop control work rather than high-speed video or RF signal chains. Actual closed-loop bandwidth depends on the selected noise gain, feedback network, load, and supply voltage.
When should I choose LM358WPT over LMV358?
Choose the LM358WPT when the design needs its documented 3 V to 36 V operating range and a conventional general-purpose dual-amplifier function. Choose the LMV358 family when a lower-voltage, lower-power design is acceptable and the selected variant offers the required input, output, noise, and bandwidth performance. Both can use standard dual-op-amp pin arrangements, but the exact package ordering code must match the PCB footprint.
What is the best Analog Devices equivalent for LM358WPT?
There is no single universal drop-in selection for every LM358WPT design; the closest choice depends on the required supply voltage, accuracy, noise, bandwidth, and output current. The NE5532 is a common dual-amplifier comparison candidate, but it is not a specification-for-specification LM358 replacement and may have different common-mode and output-swing limits. Confirm the exact package and electrical margins before substituting it.
LM358WPT vs LM2904 - which is better for a 5V control circuit?
The LM2904 is the stronger candidate when the circuit is a 5 V industrial or automotive control design that requires the LM2904 family's temperature-grade and operating-range qualifications. The LM358WPT provides a nominal 5 V part with a documented 3 V to 36 V operating range and two channels in an 8-pin TSSOP. Final selection should consider input offset, common-mode range, output swing, and the required qualification level.
What is the difference between LM358WPT and MC1458?
Both are dual general-purpose operational amplifiers intended for similar feedback-control and signal-conditioning roles, but their electrical characteristics and manufacturer specifications are not necessarily identical. The LM358WPT is identified as a 5 V, 1.1 MHz, 8-pin TSSOP part, while the MC1458 ordering code must be checked for package, supply range, offset voltage, and load-drive compatibility. Use the MC1458 only after confirming those differences.
Where can I buy LM358WPT online?
Use the Request a Quote form on this page to request the current LM358WPT quotation, stock status, lead time, and volume pricing from XAIPART. The form allows buyers to specify the required quantity and packaging. This page does not publish a fixed price table because commercial terms and component availability can change.
Is LM358WPT in stock and what is the lead time?
Request the current LM358WPT inventory position and lead time through the Request a Quote form on this page. The manufacturer datasheet describes the electrical device, while orderable stock and delivery schedules are commercial conditions that vary with quantity and purchasing date. Providing your target quantity and required date helps produce an actionable quotation.
How should decoupling and grounding be handled for the LM358WPT?
Place the supply bypass capacitor close to pin 8 and connect pin 4 to a low-impedance ground plane, keeping both paths short. Route the non-inverting and inverting inputs away from switching-regulator nodes, relay contacts, and other high-current traces. Because the LM358WPT is intended for relatively slow general-purpose amplification, careful physical isolation usually contributes more to usable accuracy than an exotic compensation network.

के लिए इंजीनियरिंग संदर्भ डेटा LM358WPT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LM358WPT for general-purpose dual amplification in a 3 V to 36 V design, particularly when the circuit operates from 5 V, handles slower sensor or control signals, and benefits from two channels in one 8-pin TSSOP. Choose LM2904 when your program requires the temperature characteristics and qualification positioning of that family. Consider LMV358 for lower-voltage, lower-power designs after checking its supply and common-mode limits. Choose NE5532 when low-noise audio performance is more important than the LM358 family's general-purpose characteristics. Choose MC1458 only after verifying offset, bias current, bandwidth, and output swing against the original circuit. For every alternative, confirm that the ordering code specifies the same TSSOP footprint and that the selected device remains stable with the intended noise gain, load capacitance, and supply voltage.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LM358B LM2904 LMV358 MC1458 NE5532
Package TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8
Brand ROHM Semiconductor Texas Instruments onsemi Texas Instruments onsemi Texas Instruments
Number of Amplifiers 2 2 2 2 2 2

मुख्य विशेषताएँ

  • Wide single-supply operating range (बनामLMV358)
  • General-purpose bandwidth for control and audio stages (बनामNE5532)
  • Temperature-oriented LM358-family alternative (बनामLM2904)
  • Two independent channels in one compact surface-mount package (बनामMC1458)

डिज़ाइन नोट्स

The LM358WPT can operate from 3 V to 36 V, but the permissible input and output voltages are narrower than the supply range. Before connecting a higher-voltage source, verify the common-mode limits and ensure the output remains inside the output-swing window with adequate margin. Place a local bypass capacitor from pin 8 to the ground plane and connect pin 4 directly to the plane rather than routing the return through a shared conductor.

Keep the feedback resistors, input-sensing paths, and compensation components close to their associated pins. Route the two input nets as short, paired traces and keep them away from switching-regulator outputs, relay drivers, and motor power wiring. A solid ground plane under the TSSOP minimizes parasitic voltage differences, while a short V- connection helps the amplifier maintain predictable output behavior at the lower supply rail.

Do not assume that every LM358-family or dual-op-amp substitute has identical common-mode range, output swing, noise, or stability behavior. Confirm the exact ordering code, package suffix, supply rating, and pin mapping before reusing a PCB. Also avoid designing around the nominal 1.1 MHz gain-bandwidth product as though it were a guaranteed closed-loop bandwidth; the achieved value depends on noise gain, feedback values, load capacitance, and supply voltage.

For source impedances above several hundred kilohms, the input bias current and leakage current can create errors comparable to the signal being measured. Use a lower-impedance sensor or add a bias resistor at the input while checking the resulting noise-gain penalty. For audio and instrumentation channels, shield sensitive inputs, keep leakage current off the input node, and use a clean reference point for the non-inverting input.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance status has not been established from the available manufacturer and distributor records. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact ROHM ordering code before release.

डेटा सत्यापन तिथि: 2026-11-13 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LM358WPT datasheet LM358WPT datasheet pdf LM358WPT pinout LM358WPT equivalent LM358WPT replacement LM358WPT vs LM2904 LM358WPT 8-TSSOP LM358WPT 5V 1.1MHz ROHM LM358WPT LM358WPT price LM358WPT stock LM358WPT application circuit

संबंधित कंपोनेंट्स और शब्द

ROHM Semiconductor LM358WPT LM358 LM358B LM2904 LMV358 MC1458 NE5532 dual operational amplifier general-purpose amplifier analog amplifier IC semiconductor TSSOP-8 surface mount SMD package gain-bandwidth product slew rate input common-mode range output swing internal compensation single-supply operation split-supply operation feedback control sensor signal conditioning audio preamplifier
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें