ROHM Semiconductor

LMR934F-GE2 - Low-Power Quad Rail-to-Rail Op Amp | ROHM

MPN: LMR934F-GE2 ✓ सक्रिय
5 V Vdss 14-SOIC, 4.40 mm width Package
न्यूनतम ऑर्डर मात्रा: 1 |

LMR934F-GE2 अवलोकन

ROHM Semiconductor LMR934F-GE2 is a low-power, four-circuit, input-output full-swing operational amplifier in a 14-SOIC package. The device supports a 5 V supply and is designed for general-purpose applications requiring rail-to-rail output swing. Its quad-channel configuration integrates four amplifiers into one package, reducing board area compared with separate single-channel devices. The LMR934F-GE2 belongs to ROHM's LMR series of low-voltage, low-supply-current operational amplifiers intended for compact and power-conscious analog circuits.

An operational amplifier is an active analog building block that compares two input voltages and amplifies their difference. A rail-to-rail output amplifier can approach its supply rails at the output, increasing usable output range in low-voltage systems. The input-output full-swing designation identifies this device as suitable for applications requiring low-voltage operation and broad output range. Within the integrated-circuit hierarchy, the LMR934F-GE2 is an operational amplifier, which belongs to the amplifier IC and analog signal-processing categories.

The LMR934F-GE2 provides four amplifier channels in one 14-SOIC package. Its low-power operating approach is suitable for battery-powered and portable equipment where supply efficiency and compactness matter. The rail-to-rail output characteristic supports signal conditioning near the positive and negative limits of a 5 V supply, while the quad configuration can implement filters, buffers, sensor interfaces, or multiple independent gain stages. The manufacturer identifies the LMR934 family as operable with low voltage and low supply current.

The integrated four-channel architecture simplifies PCB design by reducing the number of packages and external connections required for multiple amplifier functions. The 14-SOIC footprint supports conventional surface-mount assembly, while full-swing output behavior can improve signal utilization in low-headroom analog systems. Because the device is intended for general-purpose amplification, its suitability for precision instrumentation, audio, or sensor conditioning depends on the complete operating conditions and circuit configuration, including supply voltage, load, bandwidth, and stability requirements.

Typical uses include four-channel sensor signal conditioning, low-voltage filtering, buffering, portable test equipment, audio preamplification, and general embedded analog interfaces. In a four-sensor system, all channels can share the same supply and decoupling structure, while independent amplifier sections handle different input signals. In portable equipment, the low-power nature of the LMR series supports compact implementations, although total current consumption depends on the selected device, load condition, operating mode, and external circuitry.

Layout should place the supply bypass capacitor close to the device and minimize trace resistance between the capacitor and amplifier supply pins. Keep input and feedback routing short, maintain symmetry between differential inputs, and keep high-impedance input nodes away from switching nodes and digital return currents. Confirm output swing, noise, offset, bias current, stability, and input common-mode range against the manufacturer datasheet before fixing the external feedback network for a particular gain or load.

This product page organizes the exact MPN, technical constraints, practical applications, design guidance, and qualified comparison information for engineers evaluating the LMR934F-GE2. It also distinguishes confirmed manufacturer and distributor attributes from parameters that require direct datasheet verification, helping procurement and design teams assess fit without relying on ambiguous family-level descriptions.

के लिए ड्रॉप-इन विकल्प LMR934F-GE2 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

LMR934FJ-GE2

✅ ड्रॉप-इन
📦 14-SOIC
Related 14-SOIC family member listed with 1.4 MHz gain-bandwidth product, 0.35 V/us slew rate, and 1.8 V to 5 V supply operation; verify pin assignments before substitution

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LMR934F-GE2 Maximum Ratings और Electrical Characteristics

Product Type Quad operational amplifier
Amplifier Count 4 circuits
Operating Supply 5 V
Output Architecture Rail-to-rail output
Signal Swing Input/output full swing
Supply Category Low-voltage, low-supply-current
पैकेज 14-SOIC, 4.40 mm width
माउंटिंग प्रकार Surface mount

LMR934F-GE2 14-soic, 4.40 mm width पिन कॉन्फ़िगरेशन गाइड

LMR934F-GE2 (14-soic, 4.40 mm width पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

LMR934F-GE2 के लिए 14-soic, 4.40 mm width पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LMR934F-GE2.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LMR934F-GE2 के लिए उपयुक्त है 6 अनुप्रयोगs: Portable Sensor Signal Conditioning, Industrial Four-Channel Amplification, Low-Voltage Audio Preamplification, Embedded Analog Filtering, Battery-Powered Measurement Equipment, General-Purpose Interface Buffering.

📱

Portable Sensor Signal Conditioning

The LMR934F-GE2 fits four-channel portable sensor conditioning because it combines four low-power amplifiers in one 14-SOIC package and operates at a 5 V supply point. Each channel can amplify or buffer a low-voltage sensor signal while the integrated quad arrangement reduces component count. The LMR934 family is specifically designed for low-voltage, low-supply-current operation, making it relevant to compact battery-powered instruments. Confirm the input common-mode range, offset, bias current, noise, and output swing in the manufacturer datasheet, then use short input traces and local supply bypassing to preserve sensor fidelity.

🏭

Industrial Four-Channel Amplification

The LMR934F-GE2 supports industrial analog interfaces requiring four low-voltage gain or buffer stages without allocating four separate amplifier packages. A 5 V supply, rail-to-rail output behavior, and full-swing operation are useful when signals must occupy much of the available supply range. Its four channels could condition pressure, position, level, or resistance-based sensor outputs before an ADC samples them. Keep sensitive analog traces away from motors, relays, and switching converters, and verify operating-temperature limits, channel-to-channel behavior, and electrical ratings before deployment.

🎧

Low-Voltage Audio Preamplification

The LMR934F-GE2 can provide multiple low-voltage preamplifier or buffer stages in compact audio electronics. Its rail-to-rail output and full-swing operation help preserve signal range in a 5 V system, while four channels can support stereo paths, microphone stages, or line-level conditioning. The low-power orientation of the LMR934 series suits battery-powered audio equipment. However, noise, gain-bandwidth product, slew rate, input bias current, and output-drive capability must be checked against the audio bandwidth and load before finalizing the circuit.

🧩

Embedded Analog Filtering

The LMR934F-GE2 is suitable for implementing several compact active-filter or signal-shaping stages in an embedded control system. Four amplifier channels allow a designer to build cascaded low-pass, high-pass, or buffering sections while limiting package count. The low-voltage and low-supply-current characteristics align with embedded equipment operating from a 5 V rail. Select feedback capacitors and resistors according to the required response, confirm stability at the selected noise gain, and keep high-impedance nodes short and isolated from digital switching paths.

⚡

Battery-Powered Measurement Equipment

The LMR934F-GE2 supports battery-powered measurement equipment where low-voltage operation and integration of four channels are priorities. The LMR934 family targets low supply current, while the quad configuration reduces the number of packages needed for repeated amplification or buffering. A 5 V rail and rail-to-rail output can be useful in compact handheld probes, environmental monitors, and portable test devices. Confirm actual quiescent current and load-dependent consumption in the datasheet, disable unused channels according to manufacturer guidance, and account for the device's contribution to total battery capacity.

🔧

General-Purpose Interface Buffering

The LMR934F-GE2 can buffer several low-voltage interface signals when source impedance, loading, or level translation requires an active stage. Rail-to-rail output behavior provides improved use of the 5 V signal range, and the four independent channels reduce board area in designs with multiple buffered nodes. Common uses include comparator-style logic interfaces, sensor outputs, ADC drivers, and small-signal distribution. The output must remain within its linear operating region under the intended load, and the designer should verify input bias current, offset, stability, and capacitive-load behavior for each channel.

What is the LMR934F-GE2?
The LMR934F-GE2 is a low-power, four-circuit, input-output full-swing operational amplifier from ROHM Semiconductor in a 14-SOIC package. According to the ROHM product page, the LMR934 family is designed for low-voltage and low-supply-current operation and includes rail-to-rail output behavior. It is intended for general-purpose signal conditioning, buffering, filtering, and other compact analog applications.
How many amplifiers are in the LMR934F-GE2?
The LMR934F-GE2 contains four operational-amplifier circuits in one 14-SOIC package. The distributor product listing identifies it as a four-circuit rail-to-rail amplifier, while the ROHM product page describes the LMR934 family as a low-voltage, low-power input-output full-swing amplifier. Consolidating four channels into one package can reduce PCB area and simplify shared supply bypassing.
What supply voltage does the LMR934F-GE2 use?
The LMR934F-GE2 is identified for operation from a 5 V supply in its product listing. The manufacturer describes the LMR934 series as suitable for low-voltage operation, but the complete allowable supply range should be confirmed in the manufacturer datasheet. Supply design must also account for output swing, load current, thermal dissipation, and the selected bypass network.
Does the LMR934F-GE2 have rail-to-rail output?
Yes, the LMR934F-GE2 has a rail-to-rail output stage. The ROHM product page classifies the LMR934 as an input-output full-swing, low-power operational amplifier, and the distributor listing explicitly describes the device as rail-to-rail. This allows the output to move closer to the supply limits than a conventional non-rail-to-rail amplifier, improving usable swing in low-voltage systems.
What package does the LMR934F-GE2 use?
The LMR934F-GE2 uses a 14-SOIC surface-mount package measuring 4.40 mm in width. The manufacturer and distributor product descriptions identify the same 14-pin package, making it suitable for conventional PCB assembly. Use the manufacturer package drawing and land pattern during layout, particularly for lead pitch, body dimensions, solder mask, and exposed-pad requirements; this SOIC package does not indicate an exposed thermal pad.
Where can I download the LMR934F-GE2 datasheet?
The official LMR934F-GE2 datasheet can be obtained from the ROHM product page at https://www.rohm.com/products/amplifiers-and-linear/operational-amplifiers/low-power/input-output-full-swing/lmr934f-product. The page is the appropriate starting point for electrical characteristics, pin descriptions, package drawings, typical application circuits, and ordering information. Verify the revision associated with the exact orderable MPN before releasing a production design.
Where can I find the LMR934F-GE2 pinout?
Use the pin-description table and package drawing on the ROHM LMR934F product page to assign LMR934F-GE2 connections. The exact numbered pinout is not reproduced here, so use the manufacturer documentation rather than inferring connections from a generic quad-amplifier diagram. The 14-SOIC package includes four amplifier channels, power pins, and channel-specific input and output functions that must be checked against the selected revision.
LMR934F-GE2 vs LMR934FJ-GE2: which one should be selected?
Both parts are identified as ROHM LMR934-family devices in 14-SOIC-compatible documentation, but the exact ordering-code and product differences should be confirmed from the manufacturer data. LMR934FJ-GE2 is listed with a 1.4 MHz gain-bandwidth product, 0.35 V/µs slew rate, 1.8 V to 5 V supply operation, 5 nA input bias current, and 1 mV input offset voltage. Those figures should not be transferred to LMR934F-GE2 without datasheet confirmation.
When should I choose the LMR934F-GE2 over a single or dual amplifier?
Choose the LMR934F-GE2 when a design needs four independently biased or buffered analog channels but package count and board area are important. Its 14-SOIC package consolidates four amplifiers, and the LMR934 family is designed for low-voltage, low-supply-current operation. Select a single or dual amplifier instead when fewer channels are required and a smaller package or lower unused-channel cost is more important.
Is the LMR934F-GE2 suitable for low-voltage sensor conditioning?
The LMR934F-GE2 is suitable in principle for low-voltage sensor conditioning because it combines four low-power amplifiers, a 5 V operating point, and full-swing output capability. Its suitability depends on the sensor output range, required common-mode range, noise, offset, bias current, bandwidth, and capacitive loading. Verify those parameters in the manufacturer datasheet before choosing the gain and feedback network.
What can replace the LMR934F-GE2?
A valid replacement must use the same 14-SOIC footprint and preserve the pin assignments, supply limits, input and output ranges, channel count, bandwidth, slew rate, offset, bias current, noise, and stability characteristics. The closest identified related option is the ROHM LMR934FJ-GE2, but its distinct electrical ratings must be checked before substitution. No additional drop-in replacement is presented without verified pin and parametric compatibility.
Is LMR934F-GE2 the same as LMR934FJ-GE2?
No, the LMR934F-GE2 and LMR934FJ-GE2 should not be treated as identical solely because both belong to the LMR934 family. A separate LMR934FJ-GE2 listing identifies different performance details, including a 1.4 MHz gain-bandwidth product and 0.35 V/µs slew rate. Confirm both electrical ratings and the official pin table before using one as a replacement for the other.
Where can I buy the LMR934F-GE2 and check its lead time?
Use the Request a Quote form on this page to request LMR934F-GE2 availability, order quantity, lead time, and current commercial terms. One distributor listing records 3,984 pieces in stock, but its lead time is marked to be confirmed, so inventory and delivery timing should be revalidated. The request form avoids presenting temporary listing status as a guaranteed production allocation.
What is the price of the LMR934F-GE2?
Use the Request a Quote form on this page for the current LMR934F-GE2 unit price and volume terms. A distributor listing shows a reference unit price of USD 0.8112, but it does not provide a complete qualifying quantity-break schedule, so the structured pricing tier remains empty. Current pricing can change with quantity, lifecycle status, inventory, and packaging requirements.
What are the key specifications of the LMR934F-GE2 that engineers should know?
The confirmed core specifications are four amplifier circuits, a 5 V operating supply, rail-to-rail output, input-output full-swing behavior, low-voltage operation, low supply current, and a 14-SOIC package. ROHM describes the LMR934 family as low-power and operable at low voltage, while the distributor listing identifies the exact MPN as a standard general-purpose quad amplifier. Detailed noise, offset, bandwidth, and thermal limits require confirmation in the manufacturer datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा LMR934F-GE2 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LMR934F-GE2 when a compact 5 V analog design requires four low-power amplifier channels and rail-to-rail output behavior. It is particularly useful for multi-sensor conditioning, buffering, filtering, and portable instrument interfaces where reducing package count is important. The LMR934FJ-GE2 is the closest identified related option and may be considered when its documented 1.8 V to 5 V supply range, 1.4 MHz gain-bandwidth product, 0.35 V/us slew rate, 5 nA bias current, and 1 mV offset satisfy the application. Verify the official pin assignments and complete electrical specifications before substitution. For designs requiring only one or two channels, a single or dual amplifier can reduce unused silicon, simplify routing, and potentially improve cost efficiency. Neither part should be selected solely from the family description when noise, offset, common-mode range, stability, or exact output swing is critical.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LMR934FJ-GE2
Brand ROHM Semiconductor ROHM Semiconductor
Package 14-SOIC 14-SOIC
Amplifier Count 4 circuits 4 circuits
Output Architecture Rail-to-rail output Rail-to-rail output
Listed Supply Voltage 5 V 1.8 V to 5 V

मुख्य विशेषताएँ

  • Four amplifier channels in one package (बनामLMR934FJ-GE2)
  • Low-voltage general-purpose positioning (बनामLMR934FJ-GE2)
  • Package consolidation for multi-channel analog systems (बनामLMR934FJ-GE2)

डिज़ाइन नोट्स

Place the supply bypass capacitor directly between the LMR934F-GE2 supply and ground pins, with the shortest and lowest-inductance routing practical. Keep amplifier input and feedback traces short and avoid routing them beneath digital clocks, DC-DC converter nodes, or high-current return paths. Symmetrical feedback components help preserve differential timing and reduce sensitivity to parasitic mismatch.

Do not assume that rail-to-rail output means the output can reach either supply rail under every load condition. Check the manufacturer output-swing curves against the selected supply voltage and load. Likewise, verify input common-mode range before using the device for sensor signals that approach either rail, and confirm that the selected feedback network remains stable with the intended gain and capacitive load.

Estimate total supply demand from the four channels because a quad device can consume more current than the corresponding number of independently controlled single amplifiers. Include quiescent current, load-dependent output current, output-stage dissipation, and the power consumed by external feedback networks. In portable systems, check whether unused channels can be disabled according to the manufacturer guidance rather than leaving them in a state that adds avoidable current draw.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No explicit environmental or automotive qualification status is stated for the exact MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation before environmental or automotive use.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LMR934F-GE2 datasheet LMR934F-GE2 datasheet pdf LMR934F-GE2 pinout LMR934F-GE2 pin configuration ROHM LMR934F-GE2 LMR934F-GE2 14-SOIC amplifier LMR934F-GE2 rail-to-rail op amp LMR934F-GE2 replacement LMR934F-GE2 equivalent LMR934F-GE2 vs LMR934FJ-GE2 LMR934F-GE2 price LMR934F-GE2 stock LMR934F-GE2 sensor signal conditioning LMR934F-GE2 low voltage amplifier

संबंधित कंपोनेंट्स और शब्द

ROHM Semiconductor LMR934F-GE2 LMR934FJ-GE2 LMR934 series operational amplifier quad amplifier rail-to-rail output amplifier input-output full-swing amplifier low-power amplifier low-voltage amplifier analog IC amplifier IC semiconductor 14-SOIC SOIC package family surface-mount package 5 V supply signal conditioning sensor interface active filtering audio preamplification input common-mode range gain-bandwidth product slew rate input offset voltage
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें