LMR934F-GE2 - Low-Power Quad Rail-to-Rail Op Amp | ROHM
N.º de pieza: LMR934F-GE2 ✓ ActivoLMR934F-GE2 Descripción general
An operational amplifier is an active analog building block that compares two input voltages and amplifies their difference. A rail-to-rail output amplifier can approach its supply rails at the output, increasing usable output range in low-voltage systems. The input-output full-swing designation identifies this device as suitable for applications requiring low-voltage operation and broad output range. Within the integrated-circuit hierarchy, the LMR934F-GE2 is an operational amplifier, which belongs to the amplifier IC and analog signal-processing categories.
The LMR934F-GE2 provides four amplifier channels in one 14-SOIC package. Its low-power operating approach is suitable for battery-powered and portable equipment where supply efficiency and compactness matter. The rail-to-rail output characteristic supports signal conditioning near the positive and negative limits of a 5 V supply, while the quad configuration can implement filters, buffers, sensor interfaces, or multiple independent gain stages. The manufacturer identifies the LMR934 family as operable with low voltage and low supply current.
The integrated four-channel architecture simplifies PCB design by reducing the number of packages and external connections required for multiple amplifier functions. The 14-SOIC footprint supports conventional surface-mount assembly, while full-swing output behavior can improve signal utilization in low-headroom analog systems. Because the device is intended for general-purpose amplification, its suitability for precision instrumentation, audio, or sensor conditioning depends on the complete operating conditions and circuit configuration, including supply voltage, load, bandwidth, and stability requirements.
Typical uses include four-channel sensor signal conditioning, low-voltage filtering, buffering, portable test equipment, audio preamplification, and general embedded analog interfaces. In a four-sensor system, all channels can share the same supply and decoupling structure, while independent amplifier sections handle different input signals. In portable equipment, the low-power nature of the LMR series supports compact implementations, although total current consumption depends on the selected device, load condition, operating mode, and external circuitry.
Layout should place the supply bypass capacitor close to the device and minimize trace resistance between the capacitor and amplifier supply pins. Keep input and feedback routing short, maintain symmetry between differential inputs, and keep high-impedance input nodes away from switching nodes and digital return currents. Confirm output swing, noise, offset, bias current, stability, and input common-mode range against the manufacturer datasheet before fixing the external feedback network for a particular gain or load.
This product page organizes the exact MPN, technical constraints, practical applications, design guidance, and qualified comparison information for engineers evaluating the LMR934F-GE2. It also distinguishes confirmed manufacturer and distributor attributes from parameters that require direct datasheet verification, helping procurement and design teams assess fit without relying on ambiguous family-level descriptions.
Alternativas directas para LMR934F-GE2 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
LMR934FJ-GE2
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LMR934F-GE2 Valores máximos y características eléctricas
| Product Type | Quad operational amplifier |
| Amplifier Count | 4 circuits |
| Operating Supply | 5 V |
| Output Architecture | Rail-to-rail output |
| Signal Swing | Input/output full swing |
| Supply Category | Low-voltage, low-supply-current |
| Encapsulado | 14-SOIC, 4.40 mm width |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de LMR934F-GE2 14-soic, 4.40 mm width
Configuración de pines para LMR934F-GE2 (encapsulado 14-soic, 4.40 mm width). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para LMR934F-GE2.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LMR934F-GE2 es adecuado para 6 aplicacións: Portable Sensor Signal Conditioning, Industrial Four-Channel Amplification, Low-Voltage Audio Preamplification, Embedded Analog Filtering, Battery-Powered Measurement Equipment, General-Purpose Interface Buffering.
Portable Sensor Signal Conditioning
The LMR934F-GE2 fits four-channel portable sensor conditioning because it combines four low-power amplifiers in one 14-SOIC package and operates at a 5 V supply point. Each channel can amplify or buffer a low-voltage sensor signal while the integrated quad arrangement reduces component count. The LMR934 family is specifically designed for low-voltage, low-supply-current operation, making it relevant to compact battery-powered instruments. Confirm the input common-mode range, offset, bias current, noise, and output swing in the manufacturer datasheet, then use short input traces and local supply bypassing to preserve sensor fidelity.
Recomendado
Industrial Four-Channel Amplification
The LMR934F-GE2 supports industrial analog interfaces requiring four low-voltage gain or buffer stages without allocating four separate amplifier packages. A 5 V supply, rail-to-rail output behavior, and full-swing operation are useful when signals must occupy much of the available supply range. Its four channels could condition pressure, position, level, or resistance-based sensor outputs before an ADC samples them. Keep sensitive analog traces away from motors, relays, and switching converters, and verify operating-temperature limits, channel-to-channel behavior, and electrical ratings before deployment.
Recomendado
Low-Voltage Audio Preamplification
The LMR934F-GE2 can provide multiple low-voltage preamplifier or buffer stages in compact audio electronics. Its rail-to-rail output and full-swing operation help preserve signal range in a 5 V system, while four channels can support stereo paths, microphone stages, or line-level conditioning. The low-power orientation of the LMR934 series suits battery-powered audio equipment. However, noise, gain-bandwidth product, slew rate, input bias current, and output-drive capability must be checked against the audio bandwidth and load before finalizing the circuit.
Recomendado
Embedded Analog Filtering
The LMR934F-GE2 is suitable for implementing several compact active-filter or signal-shaping stages in an embedded control system. Four amplifier channels allow a designer to build cascaded low-pass, high-pass, or buffering sections while limiting package count. The low-voltage and low-supply-current characteristics align with embedded equipment operating from a 5 V rail. Select feedback capacitors and resistors according to the required response, confirm stability at the selected noise gain, and keep high-impedance nodes short and isolated from digital switching paths.
Recomendado
Battery-Powered Measurement Equipment
The LMR934F-GE2 supports battery-powered measurement equipment where low-voltage operation and integration of four channels are priorities. The LMR934 family targets low supply current, while the quad configuration reduces the number of packages needed for repeated amplification or buffering. A 5 V rail and rail-to-rail output can be useful in compact handheld probes, environmental monitors, and portable test devices. Confirm actual quiescent current and load-dependent consumption in the datasheet, disable unused channels according to manufacturer guidance, and account for the device's contribution to total battery capacity.
Recomendado
General-Purpose Interface Buffering
The LMR934F-GE2 can buffer several low-voltage interface signals when source impedance, loading, or level translation requires an active stage. Rail-to-rail output behavior provides improved use of the 5 V signal range, and the four independent channels reduce board area in designs with multiple buffered nodes. Common uses include comparator-style logic interfaces, sensor outputs, ADC drivers, and small-signal distribution. The output must remain within its linear operating region under the intended load, and the designer should verify input bias current, offset, stability, and capacitive-load behavior for each channel.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LMR934F-GE2 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LMR934FJ-GE2 |
|---|---|---|
| Brand | ROHM Semiconductor | ROHM Semiconductor |
| Package | 14-SOIC | 14-SOIC |
| Amplifier Count | 4 circuits | 4 circuits |
| Output Architecture | Rail-to-rail output | Rail-to-rail output |
| Listed Supply Voltage | 5 V | 1.8 V to 5 V |
Diferenciadores clave
- Four amplifier channels in one package (frente a LMR934FJ-GE2)
- Low-voltage general-purpose positioning (frente a LMR934FJ-GE2)
- Package consolidation for multi-channel analog systems (frente a LMR934FJ-GE2)
Notas de diseño
Place the supply bypass capacitor directly between the LMR934F-GE2 supply and ground pins, with the shortest and lowest-inductance routing practical. Keep amplifier input and feedback traces short and avoid routing them beneath digital clocks, DC-DC converter nodes, or high-current return paths. Symmetrical feedback components help preserve differential timing and reduce sensitivity to parasitic mismatch.
Do not assume that rail-to-rail output means the output can reach either supply rail under every load condition. Check the manufacturer output-swing curves against the selected supply voltage and load. Likewise, verify input common-mode range before using the device for sensor signals that approach either rail, and confirm that the selected feedback network remains stable with the intended gain and capacitive load.
Estimate total supply demand from the four channels because a quad device can consume more current than the corresponding number of independently controlled single amplifiers. Include quiescent current, load-dependent output current, output-stage dissipation, and the power consumed by external feedback networks. In portable systems, check whether unused channels can be disabled according to the manufacturer guidance rather than leaving them in a state that adds avoidable current draw.
Información de cumplimiento
No explicit environmental or automotive qualification status is stated for the exact MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation before environmental or automotive use.