ROHM Semiconductor

LMR981G-GTR - Low-Power Rail-to-Rail Op Amp | ROHM

MPN: LMR981G-GTR ✓ सक्रिय
5 V maximum specified supply Vdss Yes Id 6-pin SSOP, embossed tape-and-reel Package
न्यूनतम ऑर्डर मात्रा: 1 |

LMR981G-GTR अवलोकन

The ROHM Semiconductor LMR981G-GTR is a single-circuit, low-power operational amplifier with rail-to-rail input and output capability, supplied in a 6-pin SSOP embossed tape-and-reel package. The device is designed for low-voltage systems that require an amplifier to operate close to both supply rails while keeping supply current low. Its general-purpose configuration makes it applicable to sensor buffering, audio signal conditioning, low-voltage filtering, and general analog signal amplification.

An operational amplifier, or op amp, is an analog integrated circuit that provides high voltage gain in an open-loop configuration. Rail-to-rail input and output amplifiers can accept input signals close to the negative and positive supply rails and can swing their output close to those rails. This capability is useful in low-voltage systems because it expands the usable input and output range without requiring a separate midrail bias reference.

The LMR981G belongs to the ROHM LMR series of low-power input-output full-swing operational amplifiers. According to the manufacturer product page, this series was developed for single, dual, and quad amplifier configurations that operate at low voltage and low supply current. The LMR981G is the single-amplifier configuration, while the LMR982 family adds a shutdown function. Its 5 V supply rating, 6-pin SSOP package, and rail-to-rail input/output architecture make it a compact choice for portable and embedded analog designs.

Key electrical characteristics include one amplifier circuit per package, general-purpose signal conditioning, low-power operation, and full-swing input and output behavior. The datasheet defines the detailed input bias current, input offset voltage, unity-gain bandwidth, slew rate, noise specifications, and output-current limits for design calculations. Because this page does not reproduce those numeric ratings, engineers should use the manufacturer datasheet for precision AC and DC design work.

Typical applications include conditioning the output of resistive sensors, buffering ADC inputs, implementing active filters, and amplifying low-level analog waveforms from portable instruments. The SSOP-6 package is also useful where board space is restricted, although its small body and limited copper area require attention to thermal rise when the amplifier operates continuously near its output-current limit.

When designing around the LMR981G-GTR, confirm the exact input common-mode range, output swing, unity-gain bandwidth, and noise figures for the selected supply voltage. Place the bypass capacitor close to the supply pin, keep feedback resistors close to the amplifier inputs, and avoid driving a capacitive load directly unless the stability behavior has been verified.

This page combines the manufacturer product information with a practical selection guide, packaging details, design cautions, and a structured comparison of drop-in candidates. It adds engineering context around the LMR981G-GTR without replacing the manufacturer datasheet for guaranteed limits, test conditions, and absolute maximum ratings.

के लिए ड्रॉप-इन विकल्प LMR981G-GTR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

LMR981G

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SSOP-6
Base device designation without the -GTR order suffix; electrical ratings are identical while ordering code and packaging designation differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LMR982G-GTR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SSOP-6
Adds shutdown functionality; core rail-to-rail input/output ratings are similar but shutdown control and current behavior differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LMR981G-GTR Maximum Ratings और Electrical Characteristics

Amplifier Type General-purpose operational amplifier
Number of Circuits 1 circuit
Input Type Rail-to-rail input
आउटपुट प्रकार Rail-to-rail output
सप्लाई वोल्टेज 5 V maximum specified supply
Low-Voltage Operation Supported
Low Supply Current Yes
Shutdown Function Not included in LMR981G; shutdown is applied to LMR982
पैकेज 6-pin SSOP, embossed tape-and-reel
माउंटिंग प्रकार Surface mount
Product Series ROHM LMR series, low-power input-output full-swing operational amplifier

LMR981G-GTR 6-pin ssop, embossed tape-and-reel पिन कॉन्फ़िगरेशन गाइड

LMR981G-GTR (6-pin ssop, embossed tape-and-reel पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

LMR981G-GTR के लिए 6-pin ssop, embossed tape-and-reel पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LMR981G-GTR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LMR981G-GTR के लिए उपयुक्त है 6 अनुप्रयोगs: Low-Voltage Sensor Signal Conditioning, Portable Audio Preamp and Buffer, Active Low-Pass Filter, ADC Input Buffer and Driver, Battery-Powered Measurement Module, Industrial Control Signal Interface.

🧩

Low-Voltage Sensor Signal Conditioning

The LMR981G-GTR suits sensor front ends that operate from a low supply and produce signals near either rail. Its rail-to-rail input behavior reduces the need for a midrail reference when the sensor output spans much of the supply range, while the single amplifier and 6-pin SSOP package conserve board area. Place the amplifier close to the sensor to minimize leakage through PCB contamination and long traces. For resistive dividers or thermistors, verify input bias current against the source impedance and confirm offset and noise in the datasheet. The low-power operating approach is especially useful in battery-powered monitors where the amplifier must remain active continuously.

🎧

Portable Audio Preamp and Buffer

The LMR981G-GTR can buffer a microphone, line-level input, or headphone-driver stage in a single-supply audio design. Rail-to-rail output allows the signal to use more of the available supply range, which is valuable in compact portable equipment. Configure the non-inverting gain path with feedback resistors placed close to the amplifier pins, and place input filtering ahead of the amplifier to avoid amplifying unwanted high-frequency content. Because audio quality depends on noise, distortion, and stability, confirm the applicable gain-bandwidth, output-swing, and capacitive-load limits at the intended supply voltage before layout release.

🔧

Active Low-Pass Filter

Use the LMR981G-GTR as the active element in a first-order or higher-order low-pass filter when the signal is referenced to ground and the supply voltage is limited. Its rail-to-rail input and output characteristics provide useful signal range in single-supply systems, while the compact SSOP-6 package leaves room for passive components. Select resistor and capacitor values for the required cutoff and verify that the closed-loop gain remains inside the amplifier's stable operating region. Keep the feedback network compact, connect the bypass capacitor close to the supply pin, and check phase margin against the actual load rather than relying only on nominal gain-bandwidth figures.

📊

ADC Input Buffer and Driver

The LMR981G-GTR can isolate a sensor or transducer from the sampling input of an ADC, preventing the converter's acquisition transient from affecting the source. Low-voltage operation and rail-to-rail input and output behavior make the amplifier appropriate for compact mixed-signal boards, provided the source impedance and required settling time are compatible with the input capacitance. Place the amplifier adjacent to the ADC input and route the differential or single-ended pair away from digital clocks. Review input bias current, offset, noise, and output-swing limits, because high-resolution conversion performance can be degraded by impedance mismatch or source-current error.

🔋

Battery-Powered Measurement Module

The LMR981G-GTR is appropriate for a battery-powered measurement module that must amplify a low-level analog signal without drawing excessive supply current. The LMR series is specifically positioned for low-voltage, low-supply-current operation, and the single-amplifier configuration avoids the unnecessary circuitry of a dual or quad package. The amplifier can run continuously, or the surrounding system can use a higher-order LMR-family device when a controllable shutdown state is needed. Validate quiescent current, output-current capability, and the minimum operating supply at the highest temperature because battery-life calculations and weak-signal performance are sensitive to those conditions.

🏭

Industrial Control Signal Interface

The LMR981G-GTR can buffer control, feedback, or monitoring signals in a low-voltage industrial control board. Rail-to-rail input capability accepts signals spanning most of the supply range, and the 6-pin SSOP package simplifies routing in densely populated control assemblies. The device is best used for slow or moderate-bandwidth signals where its specified noise, offset, and slew-rate characteristics meet the control-loop requirement. Keep traces away from motors, relays, and power-conversion nodes, and use a dedicated bypass capacitor at the supply pin. For protection against industrial transients, add suitable external clamping and filtering rather than relying on the amplifier's internal structures.

What is the LMR981G-GTR?
The LMR981G-GTR is a single-circuit, general-purpose operational amplifier from ROHM Semiconductor with rail-to-rail input and rail-to-rail output capability. It is a low-voltage, low-supply-current device in the LMR series and is supplied in a 6-pin SSOP embossed tape-and-reel package. Its architecture suits sensor buffering, active filtering, ADC input conditioning, and low-level analog amplification where the signal must remain close to the supply rails.
What is the supply voltage of the LMR981G-GTR?
The LMR981G-GTR is specified for operation from a 5 V supply in distributor and manufacturer product listings. ROHM describes the LMR series as a low-voltage amplifier family intended for low supply current. The manufacturer datasheet should be consulted for the complete operating range, input common-mode limits, output swing, and the exact relationship between supply voltage and output-current capability before finalizing a power-supply design.
Does the LMR981G-GTR have rail-to-rail input and output?
Yes, the LMR981G-GTR has full-swing, rail-to-rail input and output characteristics. ROHM identifies the device as a low-power input-output full-swing operational amplifier in the LMR series. Rail-to-rail input allows the amplifier to sense signals near the supply limits, while rail-to-rail output permits the output voltage to approach the supply rails. Exact headroom depends on operating and load conditions defined in the datasheet.
What package does the LMR981G-GTR use?
The LMR981G-GTR is packaged in a 6-pin SSOP and supplied as an embossed tape-and-reel part. The G suffix identifies the single-amplifier configuration, while -GTR identifies the specified surface-mount packaging and reel format. Because SSOP is a small-outline package, adequate copper should be provided beneath and around the device to improve heat dissipation during sustained operation near the output-current limit.
Where can I download the LMR981G-GTR datasheet?
The official LMR981G-GTR datasheet is available from the ROHM product page at https://www.rohm.com/products/amplifiers-and-linear/operational-amplifiers/low-power/input-output-full-swing/lmr981g-product. A manufacturer-hosted copy of the family data sheet is also accessible through https://www.mouser.com/datasheet/2/348/lmr981g_e-1873479.pdf. Use the ROHM document for the authoritative pin description, electrical characteristics, test conditions, and absolute maximum ratings.
Where is the pinout for the LMR981G-GTR?
The pin description is located in the pin-configuration section of the ROHM LMR981G family datasheet. The device uses a 6-pin SSOP with a single operational amplifier, and its standard SSOP signal arrangement places the supply, input, output, and unused or shutdown-related functions across the six leads. Confirm the exact lead names against the manufacturer pin table before assigning PCB tracks or designing the footprint.
What can replace the LMR981G-GTR?
A drop-in replacement for the LMR981G-GTR must use the same 6-pin SSOP footprint, match the power-supply arrangement, preserve the input and output pin functions, and meet the required bandwidth, offset, noise, and output-current limits. The LMR981 family offers closely related single, dual, and quad amplifier options, while the LMR982 family adds shutdown functionality. A mechanical match alone does not guarantee electrical compatibility in shutdown, bias, and stability applications.
What is the best drop-in replacement for the LMR981G-GTR?
The closest same-family drop-in choices are single-amplifier LMR981G package variants with the same 6-pin SSOP lead arrangement and full-swing input/output architecture. The LMR982 is a functional alternative with a shutdown feature, but it should not be treated as an unconditional replacement because its control logic and operating behavior differ. Confirm the exact suffix, pin functions, supply limits, and stability performance before approving any substitution.
Is the LMR981G-GTR suitable for low-voltage sensor conditioning?
Yes, the LMR981G-GTR is well suited to low-voltage sensor conditioning because it combines a low-voltage operating approach, low supply current, and rail-to-rail input/output behavior. It can buffer sensor outputs that operate near the supply rails without requiring a midrail bias. Check the input bias current, offset voltage, noise density, and common-mode behavior in the datasheet when working with high-impedance sources.
What is the difference between the LMR981G and LMR982?
The principal family difference is that the LMR982 applies a shutdown function, while the LMR981G is the low-power full-swing amplifier without that shutdown feature. Both are used in low-voltage, low-supply-current signal-conditioning systems with rail-to-rail input and output capability. Package, pin functions, and electrical limits must still be compared because the shutdown version introduces an additional control and power-state requirement.
LMR981G-GTR vs. LMR982: which amplifier is better for a battery-powered design?
Choose the LMR981G-GTR when the design needs the simplest low-power amplifier and does not require an active shutdown state. Choose an LMR982-family device when the system must disconnect the amplifier to reduce current consumption between measurement cycles. Both approaches support low-voltage operation, but the shutdown solution adds control logic and requires careful definition of logic states and startup behavior.
When should I choose the LMR981G-GTR over another low-power op amp?
Choose the LMR981G-GTR when a compact 6-pin SSOP solution, low supply current, and full-swing input/output behavior are the priorities for a low-voltage design. It is particularly useful when source signals approach the supply rails and the application does not require a shutdown control. If the design needs automotive qualification, lower offset, faster slew rate, lower noise, or a guaranteed output-current rating, compare those requirements against the manufacturer specifications.
Is the LMR981G-GTR suitable for audio applications?
The LMR981G-GTR can be used for low-level audio buffering when its offset, noise, bandwidth, and output-swing specifications satisfy the signal chain. Its low-voltage and low-power characteristics are useful in portable audio equipment, while rail-to-rail output can support single-supply biasing. Verify the datasheet noise and distortion characteristics at the intended supply voltage, load, and gain because generic rail-to-rail capability alone does not guarantee high-fidelity performance.
How should the LMR981G-GTR PCB layout be designed?
Place the supply bypass capacitor close to the positive supply pin and the ground connection, and route feedback and non-inverting inputs away from switching nodes and noisy digital traces. Keep input traces short, avoid unnecessary copper around high-impedance input nodes, and provide solid ground-plane connectivity. The SSOP-6 body has limited heat-dissipation area, so use a generous copper pour when continuous output loading creates self-heating.
How do I buy the LMR981G-GTR and confirm current availability?
Use the Request a Quote form on this page to request current pricing, stock, lead time, minimum order quantity, and shipment options for the LMR981G-GTR. The part is listed across major component channels and is described as a standard, general-purpose amplifier in a 6-pin SSOP package. Because inventory and lead time change by region and volume, confirm the orderable suffix and packaging requirements with the distributor at the time of quotation.

के लिए इंजीनियरिंग संदर्भ डेटा LMR981G-GTR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LMR981G-GTR for a compact, low-voltage, single-supply design that needs rail-to-rail input and output behavior without an active shutdown function. It is appropriate for sensor buffering, ADC input conditioning, active filtering, and low-level audio amplification where low supply current and a small 6-pin SSOP package are priorities. Select LMR981G when an equivalent non-reel ordering format is needed for the same device family. Consider the LMR982G-GTR when the amplifier must disconnect between operating cycles; its shutdown capability can reduce system current, but it also adds control logic and requires verification of startup and pin behavior. For designs requiring automotive qualification, lower offset, lower noise, faster slew rate, or a guaranteed high output-current rating, compare those requirements against the manufacturer datasheet before selecting a substitute.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LMR981G LMR982G-GTR
Package 6-pin SSOP, embossed tape-and-reel 6-pin SSOP ordering variant 6-pin SSOP ordering variant
Brand ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor
Number of Amplifiers 1 circuit 1 circuit 1 circuit
Amplifier Classification General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier with shutdown
Input Type Rail-to-rail, full swing Rail-to-rail, full swing Rail-to-rail, full swing
Output Type Rail-to-rail, full swing Rail-to-rail, full swing Rail-to-rail, full swing
Low Supply Current Yes Yes Yes
Shutdown Function Not included Not included Included
Supply Configuration Single supply Single supply Single supply

मुख्य विशेषताएँ

  • Low-power single-amplifier configuration with full-swing operation (बनामLMR982G-GTR)
  • Compact six-lead SSOP implementation (बनामLMR981G)
  • General-purpose full-swing signal range (बनामLMR982G-GTR)

डिज़ाइन नोट्स

Place the supply bypass capacitor immediately beside the positive supply and ground pins, and connect the amplifier ground directly to the ground plane. Keep the non-inverting input, inverting input, and feedback components away from switching-node copper and fast digital traces. For high-impedance sources, keep the input pins and surrounding copper as small as practical, because surface contamination and leakage can degrade input bias behavior. Use the manufacturer pin configuration to verify all connections before fabrication.

Estimated: with a 5 V supply and a 2 V output, an amplifier delivering 10 mA dissipates roughly (5 V - 2 V) x 10 mA = 30 mW, before accounting for internal bias current. The SSOP-6 package has limited exposed area, so continuous operation near its output-current limit should be checked against the package thermal data and the surrounding copper. Add copper around the device where the board outline permits, and verify junction temperature at the highest expected ambient temperature.

Do not treat rail-to-rail input or output as an unlimited range; input and output headroom change with supply voltage and load current. Avoid driving a large capacitive load directly unless the datasheet's capacitive-load guidance or stability testing supports the application. A shutdown-equipped LMR982-family substitute also requires correct logic-state and startup handling. Review absolute maximum ratings, common-mode limits, output swing, and recommended operating conditions in the manufacturer datasheet.

For gain stages and filters, keep the feedback network compact and use matched resistor layout to minimize parasitic capacitance and thermal gradients. Add small input or output isolation resistors when probing or driving long cables, since they limit capacitive loading and ringing. Validate stability with the actual source resistance, load capacitance, supply decoupling, and PCB ground return. These checks are especially important because rail-to-rail stages may change stability behavior near the supply rails.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The LMR981G-GTR is a general-purpose operational amplifier, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the manufacturer's current compliance documentation for the exact ordering suffix.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LMR981G-GTR LMR981G-GTR datasheet LMR981G-GTR datasheet pdf LMR981G-GTR pinout LMR981G-GTR price LMR981G-GTR stock ROHM LMR981G-GTR LMR981G-GTR equivalent LMR981G-GTR replacement LMR981G-GTR cross reference LMR981G vs LMR982G-GTR LMR981G-GTR 6 pin SSOP LMR981G rail to rail op amp LMR981G-GTR sensor amplifier LMR981G-GTR shutdown function

संबंधित कंपोनेंट्स और शब्द

ROHM Semiconductor LMR981G-GTR LMR981G LMR982G-GTR LMR series operational amplifier op amp single-circuit amplifier rail-to-rail input rail-to-rail output full-swing amplifier low-power amplifier low-voltage operation shutdown function general-purpose amplifier 6-pin SSOP SSOP package family surface-mount package embossed tape-and-reel packaging signal conditioning sensor buffering active filter ADC input conditioning single-supply operation quiescent current
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें