NXP Semiconductors

LPC1758FBD80 - 32-Bit Cortex-M3 MCU with 512KB Flash | NXP

MPN: LPC1758FBD80 ✓ सक्रिय
80-pin LQFP, 12mm x 12mm Package 100 MHz Speed 512KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

LPC1758FBD80 अवलोकन

NXP Semiconductors LPC1758FBD80 is a scalable mainstream 32-bit ARM Cortex-M3 microcontroller with 512KB flash memory, 64KB SRAM, Ethernet, USB, and CAN connectivity in an 80-pin LQFP package. It is designed for embedded systems that require extensive peripheral support and deterministic microcontroller performance without the complexity of a higher-end Cortex-M processor.

A Cortex-M3 microcontroller is a 32-bit embedded processor built around the ARM Cortex-M3 core. The LPC1758FBD80 belongs to the broader hierarchy of microcontroller, embedded processor, semiconductor, and power management system components. Its combination of on-chip flash, static RAM, serial networking, and communication peripherals makes it suitable for gateways, industrial controllers, data-acquisition equipment, and connected embedded products.

The device provides 512KB of flash for firmware and 64KB of SRAM for working memory, reducing dependence on external memory in compact designs. Its integrated Ethernet controller supports networked data acquisition, while USB 2.0 host, OTG, and device functions support service ports, peripheral connectivity, and firmware update workflows. The LPC1700 series also offers CAN 2.0B support for industrial and vehicle-related communication networks.

The LPC1758FBD80 combines a 32-bit Cortex-M3 processor with a broad set of application peripherals. Its integrated connectivity reduces board area and simplifies designs that would otherwise require multiple external interface controllers. A 100MHz operating frequency is listed for the LPC1758FBD80 family ordering configuration, supporting responsive control loops and efficient data handling. A 120MHz figure also appears in family-level documentation and should be checked against the specific clock configuration before design release.

Typical applications include industrial Ethernet gateways, USB-to-serial field-service equipment, CAN-connected machinery controllers, network management appliances, and compact embedded data loggers. The integrated network interfaces are particularly useful where a separate Ethernet controller would increase board complexity. Designers should still validate interrupt latency, peripheral clock requirements, PHY selection, and bus timing against the intended system architecture.

For PCB implementation, use the manufacturer pin description and land-pattern information when assigning the LQFP-80 footprint, programming connections, crystal circuitry, and decoupling. Keep the MCU supply rails, ground return paths, and high-speed Ethernet or USB routes arranged according to the reference design. Confirm crystal loading capacitors, brownout settings, boot configuration, and exposed programming pins before fabrication.

This product data combines the NXP device description, interface capabilities, package information, ordering-code references, engineering application guidance, and a structured comparison of same-family drop-in options. It is intended to accelerate component selection while requiring the final design to be validated against the NXP datasheet, user manual, hardware design guidance, and application-specific qualification requirements.

के लिए ड्रॉप-इन विकल्प LPC1758FBD80 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LPC1758FBD80 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Memory, Package, ADC, Data Memory, Maximum CPU Frequency.

NXP Semiconductors
Flash Memory: 64 KB (64K x 8)
Package: 80-pin LQFP, 12 x 12 mm
ADC: 8 channels, 12-bit
इसके साथ तुलना करें LPC1758FBD80 →
NXP Semiconductors
Flash Memory: 512 kB
Package: 80-pin LQFP, 12 x 12 mm
ADC: 8-channel, 12-bit
इसके साथ तुलना करें LPC1758FBD80 →

LPC1768FBD80

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 80-pin LQFP, 12mm x 12mm
Lower flash capacity than the LPC1758FBD80's 512KB, with the remaining clock, Ethernet, USB, CAN, SRAM, and peripheral differences requiring ordering-table verification

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC1778FBD80

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 80-pin LQFP, 12mm x 12mm
Same LPC1700 family and 80-pin LQFP format, with device-specific clock, memory, and peripheral variations that require direct comparison with the 512KB LPC1758FBD80

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC1788FBD80

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 80-pin LQFP, 12mm x 12mm
Same LPC1700 family and 80-pin LQFP format, but maximum clock, memory configuration, and available peripheral resources differ from the LPC1758FBD80

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC1758FBD80 Maximum Ratings और Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Core ARM Cortex-M3
Operating Frequency 100 MHz
Flash Memory 512KB
SRAM 64KB
Program Memory Architecture 512K x 8 bits
Ethernet Support Integrated Ethernet controller
USB Support USB 2.0 host, OTG, and device
CAN Support CAN 2.0B
पैकेज 80-pin LQFP, 12mm x 12mm
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान -40°C to +85°C
Core Architecture ARMv7-M
Family LPC1700 series
Product Classification Scalable mainstream 32-bit microcontroller
डेटा बस चौड़ाई 32 bits

LPC1758FBD80 80-pin lqfp, 12mm x 12mm पिन कॉन्फ़िगरेशन गाइड

LPC1758FBD80 (80-pin lqfp, 12mm x 12mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

LPC1758FBD80 के लिए 80-pin lqfp, 12mm x 12mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LPC1758FBD80.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LPC1758FBD80 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Gateway, USB Service and Configuration Interface, CAN-Connected Machinery Controller, Embedded Data Logger, Network Management Appliance, Connected Automotive Electronics.

🏭

Industrial Ethernet Gateway

The LPC1758FBD80 fits an industrial Ethernet gateway because it combines an ARM Cortex-M3 processor, 512KB flash, 64KB SRAM, and an integrated Ethernet controller in an 80-pin LQFP package. Its on-chip connectivity can reduce the need for a separate MAC controller and conserve board area in compact DIN-rail or panel-mounted equipment. An external Ethernet PHY is still required for physical-layer signaling, and the design must accommodate magnetics, line impedance, isolation, and EMC requirements. Its 100MHz listed operating frequency supports responsive protocol processing and local supervisory tasks. For a production design, calculate protocol-stack memory consumption, confirm Ethernet timing and PHY interface requirements, and reserve boot, firmware-update, watchdog, and recovery paths in the firmware architecture.

🔧

USB Service and Configuration Interface

The LPC1758FBD80 is appropriate for USB service equipment because its integrated USB 2.0 host, OTG, and device functions can provide a direct connection to a service PC or field-upgrade tool. The 512KB flash stores application firmware and update images, while 64KB SRAM supports protocol handling and control tasks. Device mode is especially useful for configuration, diagnostics, and firmware recovery, while host or OTG mode can support removable storage and peripheral control. Designers should verify the required USB connector, ESD protection, pull-up configuration, power-source requirements, and enumeration behavior against the NXP application information. The LQFP-80 footprint provides enough pins for separate USB data, programming, reset, clock, and status interfaces, but every net must be assigned from the official pin-description table.

🏭

CAN-Connected Machinery Controller

The LPC1758FBD80 fits CAN-connected machinery control because the LPC1700 family includes CAN 2.0B support and the device provides substantial firmware and data memory in one package. Its Cortex-M3 architecture can execute motor supervisory logic, handle CAN messages, and maintain local control loops without an external processor. A CAN transceiver is required to convert the MCU's logic-level interface into differential bus signals, and the design must account for termination, surge protection, isolation, and common-mode limits. The 100MHz listed clock rate supports time-critical servicing of control and communication tasks, but firmware should use the correct peripheral clocks and interrupt priorities. Before release, verify bus timing, transceiver standby behavior, fault recovery, watchdog behavior, and fail-safe outputs against the machinery safety requirements.

🖥️

Embedded Data Logger

The LPC1758FBD80 supports a compact embedded data logger by combining 512KB flash, 64KB SRAM, Ethernet, USB, and CAN connectivity in a single microcontroller package. Firmware can sample sensors, buffer records locally, expose a service interface, and transmit summarized data over an industrial network. USB device connectivity provides a convenient configuration and recovery path, while Ethernet supports continuous collection into a supervisory system. Storage requirements should be evaluated separately because the integrated flash is primarily intended for firmware rather than an external data-logging medium. For reliable deployment, use a dedicated nonvolatile storage interface if records must survive power loss, implement timestamp and integrity checking, and protect data writes with supervisory logic. The LQFP-80 package also leaves access to multiple serial peripherals and general-purpose I/O for sensors and local human-interface devices.

🌐

Network Management Appliance

The LPC1758FBD80 is a reasonable foundation for a small network-management appliance when Ethernet, USB, and CAN interoperability are required in a controller-oriented design. The 512KB flash can hold a management application and diagnostic routines, while 64KB SRAM can support packet handling, status tables, and local control functions. Its integrated communications peripherals reduce board area compared with a design using separate USB and network interface controllers, although an Ethernet PHY and isolation or magnetics network remain external. Firmware partitioning should keep the network stack, management interface, logging, and update mechanism within the memory budget, with boot recovery planned before deployment. Validate throughput, packet-buffer requirements, DHCP behavior, link timing, thermal performance, and connector safety. The 80-pin LQFP package provides the pin count needed for communications, clock, reset, programming, and status connections.

🚗

Connected Automotive Electronics

The LPC1758FBD80 can be considered for connected automotive electronics where CAN, USB, and Ethernet-style communication capabilities align with a controller architecture. Its Cortex-M3 core, 512KB flash, and 64KB SRAM allow local control logic, diagnostics, and communications software to share one device. CAN 2.0B support is useful for vehicle or machinery networks, but a production automotive design requires a qualified transceiver, robust protection, functional-safety analysis, and environmental validation. The listed -40°C to +85°C temperature range is associated with the LPC1758 family ordering information and does not by itself establish AEC-Q100 qualification. Engineers should confirm the exact ordering code, qualification status, transient limits, brownout behavior, and diagnostic requirements before using the device in safety-relevant or regulated vehicle systems.

What are the key specifications of LPC1758FBD80 that engineers should know?
The LPC1758FBD80 is a 32-bit ARM Cortex-M3 microcontroller with 512KB of flash, 64KB of SRAM, integrated Ethernet, USB 2.0 host/OTG/device, and CAN 2.0B connectivity. According to the NXP product page, it is offered in an 80-pin LQFP package. Distributor ordering information for the LPC1758FBD80 family identifies a 100MHz operating frequency and a 12mm by 12mm package, making the device suitable for connected embedded control and data-acquisition designs.
Where can I download the LPC1758FBD80 datasheet?
The official LPC1758FBD80 datasheet and product resources are available from NXP Semiconductors through the manufacturer part page. The NXP product description identifies a Cortex-M3 MCU with 512KB flash, 64KB SRAM, Ethernet, USB, and an LQFP80 package. Use the NXP datasheet and LPC17xx user manual together for electrical limits, pin descriptions, peripheral behavior, and application guidance.
What is the LPC1758FBD80 and what is it used for?
The LPC1758FBD80 is a scalable mainstream 32-bit microcontroller based on the ARM Cortex-M3 core. According to the NXP product page, it combines 512KB flash, 64KB SRAM, Ethernet, USB, and CAN 2.0B in an 80-pin LQFP package. These resources suit industrial gateways, connected controllers, USB service equipment, CAN-based machinery, and embedded data-logging systems.
Where to buy LPC1758FBD80 online?
The LPC1758FBD80 can be requested through the Request a Quote form on this page for current sourcing, lot allocation, and delivery information. The exact device must be quoted with its complete ordering suffix because LPC1758FBD80, LPC1758FBD80K, and LPC1758FBD80,551 identify different packing or temperature configurations. Request the current commercial conditions rather than relying on a historical catalog price.
What is the lead time for LPC1758FBD80?
The current lead time for LPC1758FBD80 should be requested through the Request a Quote form on this page. Lead time can vary with the complete ordering suffix, factory inventory, order quantity, and production scheduling. Provide the target LPC1758FBD80 configuration, estimated annual usage, delivery location, and required schedule with the quotation request for the most useful response.
Is LPC1758FBD80 in stock?
Use the Request a Quote form on this page to request the current LPC1758FBD80 stock position and allocation. Availability depends on the exact ordering suffix and factory lot status, so listings for LPC1758FBD80K or LPC1758FBD80,551 should not be treated as interchangeable stock confirmations. A quotation response can include the available configuration, quantity, lot traceability, and expected delivery schedule.
What is the price of LPC1758FBD80?
The current commercial price for LPC1758FBD80 is available through the Request a Quote form on this page. A precise comparison requires the complete ordering suffix, packing format, temperature grade, and requested quantity because those choices identify different catalog entries. Submit the required configuration and annual usage to obtain a current quotation with sourcing and delivery terms.
LPC1758FBD80 vs LPC1768FBD80 - which is better for a connected controller?
The LPC1768FBD80 is the better choice when 512KB of flash is not required, while the LPC1758FBD80 is preferable for firmware-intensive applications that benefit from its larger memory capacity. Both belong to the LPC1700 Cortex-M3 family and use the same 80-pin LQFP format, but the flash-memory difference must be checked against the application code size. Ethernet, USB, CAN, and peripheral assignments also require verification before substitution.
What is the difference between LPC1758FBD80 and LPC1788FBD80?
The primary distinction is device-specific resource and performance positioning within the LPC1700 family rather than package format. The LPC1758FBD80 is identified by NXP as a 512KB-flash Cortex-M3 MCU with Ethernet, USB, and CAN, while LPC1788FBD80 belongs to the same 80-pin family but may differ in clock, memory, and peripheral configuration. Review the exact ordering-code comparison and pin descriptions before treating either device as a replacement.
When should I choose LPC1758FBD80 over LPC1768FBD80?
Choose LPC1758FBD80 when firmware size, data buffers, or planned feature growth make the larger 512KB flash configuration valuable. The LPC1768FBD80 can be considered when its lower flash capacity is sufficient and reducing memory cost is a priority. The decision should also consider SRAM, Ethernet, USB, CAN, clock requirements, peripheral mapping, and the need to preserve an existing 80-pin LQFP layout.
Is LPC1758FBD80 suitable for an industrial Ethernet gateway?
The LPC1758FBD80 is suitable for an industrial Ethernet gateway when its Ethernet, USB, CAN, 512KB flash, and 64KB SRAM resources match the design. The NXP product page explicitly identifies Ethernet and USB support, while family information also identifies CAN 2.0B. Final suitability depends on protocol stack memory use, PHY selection, timing, environmental requirements, watchdog strategy, and long-term supply conditions.
What can replace LPC1758FBD80?
The closest documented same-family choices are the LPC1768FBD80, LPC1778FBD80, and LPC1788FBD80, each offered in an 80-pin LQFP configuration. They can serve as design-review candidates, but a true drop-in substitution requires identical pin functions, clock limits, memory-map expectations, peripheral resources, supply characteristics, and startup behavior. Verify the NXP ordering tables and user manual before approving a replacement.
What is the best NXP equivalent for LPC1758FBD80?
The best NXP equivalent depends on which resource is driving the replacement: LPC1768FBD80 may be attractive for lower flash demand, while LPC1778FBD80 and LPC1788FBD80 require closer review of clock, memory, and peripheral differences. All are LPC1700-family Cortex-M3 devices associated with an 80-pin LQFP format. Use the manufacturer ordering information to confirm that every connected net remains functionally compatible.
Can LPC1768FBD80 replace LPC1758FBD80 without changing the PCB?
The LPC1768FBD80 may fit the same physical 80-pin LQFP footprint, but matching the footprint does not guarantee a functional drop-in replacement. Its flash capacity differs from the LPC1758FBD80's 512KB configuration, and clock, SRAM, peripheral, and pin-function differences must be evaluated. Confirm the complete pin-description table, memory requirements, peripheral assignments, and boot behavior before approving a PCB substitution.
Where can I find the LPC1758FBD80 pinout and package details?
The LPC1758FBD80 pinout and package dimensions are defined in the NXP LPC17xx user manual and the device datasheet linked from the manufacturer part page. The device uses an 80-pin LQFP package measuring 12mm by 12mm according to distributor ordering information. Assign PCB nets from the official pin-description table and use the manufacturer land pattern for manufacturing rather than relying on a generic package drawing.
What design considerations matter for a PCB using LPC1758FBD80?
A PCB using the LPC1758FBD80 should follow the NXP hardware design guidance for power, ground, clock, decoupling, Ethernet, USB, and CAN routing. Keep sensitive analog and oscillator routes away from fast switching nodes, provide local supply decoupling at the relevant pins, and preserve access to programming and boot-control signals. Validate Ethernet PHY impedance, USB routing, crystal loading, and signal-integrity margins during schematic and layout review.

के लिए इंजीनियरिंग संदर्भ डेटा LPC1758FBD80 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose LPC1758FBD80 when an embedded system needs an ARM Cortex-M3 controller with 512KB flash, 64KB SRAM, Ethernet, USB, and CAN in an 80-pin LQFP package. It is particularly suitable for industrial gateways, CAN-connected controllers, service interfaces, and compact network equipment where integrating communications into the MCU simplifies the PCB. Consider LPC1768FBD80 when its lower flash capacity is sufficient and memory optimization matters. Review LPC1778FBD80 or LPC1788FBD80 when their specific clock, memory, and peripheral configuration offers a better fit than the mainstream LPC1758 profile. For any alternative, verify the complete ordering suffix, operating limits, boot behavior, pin multiplexing, peripheral availability, and software-driver assumptions. Matching the LQFP80 package alone does not guarantee that an existing design can be changed without firmware or schematic revisions.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LPC1768FBD80 LPC1778FBD80 LPC1788FBD80
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 80-pin LQFP, 12mm x 12mm 80-pin LQFP, 12mm x 12mm 80-pin LQFP, 12mm x 12mm 80-pin LQFP, 12mm x 12mm
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Architecture 32-bit 32-bit 32-bit 32-bit

मुख्य विशेषताएँ

  • Larger flash allocation within the same LPC1700 LQFP80 family (बनामLPC1768FBD80)
  • Integrated multi-protocol connectivity (बनामLPC1778FBD80)
  • Mainstream Cortex-M3 resource profile (बनामLPC1788FBD80)

डिज़ाइन नोट्स

Use the NXP LQFP-80 land pattern and assign every signal from the official pin-description table. The target uses a 12mm by 12mm 80-pin LQFP package, so pad length, solder-mask clearance, paste volume, and courtyard dimensions should follow the manufacturer footprint rather than a generic QFP drawing. Verify programming access, reset, boot configuration, crystal connections, supply pins, ground pins, and communication interfaces before releasing the PCB.

Implement separate local decoupling paths for each MCU supply domain and validate voltage tolerances, sequencing, startup current, and brownout behavior against the NXP datasheet. Place the highest-frequency decoupling capacitor as close as practical to the relevant power and ground pins, with additional bulk capacitance placed near the supply entry point. Confirm power-loss behavior because an Ethernet gateway or data logger may need controlled shutdown rather than an abrupt reset.

Route USB and Ethernet signals as controlled-impedance interfaces, with differential geometry kept continuous and referenced to a continuous ground plane. Separate Ethernet magnetics and PHY placement from clocks and switching nodes, and observe the component placement and isolation guidance in the NXP hardware documentation. The MCU may integrate a network controller, but it does not replace the external PHY, line magnetics, connector protection, or required impedance-control structures.

Do not treat an ordering-code variant as an automatic substitute for LPC1758FBD80. LPC1758FBD80K and LPC1758FBD80,551 may change packing or temperature details, while LPC1758FBD80Y may represent another ordering condition. Confirm the complete suffix against the NXP ordering table and ensure the requested commercial configuration preserves the required package, grade, flash option, and lifecycle status.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The -40°C to +85°C operating range is listed for the LPC1758FBD80K family entry. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact NXP ordering-code documentation.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

lpc1758fbd80 datasheet nxp lpc1758fbd80 LPC1758FBD80 datasheet pdf LPC1758FBD80 pinout LPC1758FBD80 LQFP80 footprint LPC1758FBD80 equivalent LPC1758FBD80 replacement LPC1758FBD80 cross reference LPC1758FBD80 vs LPC1768FBD80 LPC1758FBD80 Cortex-M3 512KB LPC1758FBD80 Ethernet USB CAN LPC1758FBD80 price LPC1758FBD80 stock NXP LPC1758FBD80 microcontroller

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors LPC1758FBD80 LPC1768FBD80 LPC1778FBD80 LPC1788FBD80 LPC1700 series ARM Cortex-M3 ARMv7-M architecture 32-bit microcontroller embedded microcontroller semiconductor flash memory static RAM Ethernet controller USB 2.0 host USB OTG USB device CAN 2.0B LQFP-80 surface-mount package industrial Ethernet gateway CAN-connected controller USB service interface embedded data logger network management appliance
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें