LPC1758FBD80 - 32-Bit Cortex-M3 MCU with 512KB Flash | NXP
MPN: LPC1758FBD80 ✓ فعالLPC1758FBD80 نمای کلی
A Cortex-M3 microcontroller is a 32-bit embedded processor built around the ARM Cortex-M3 core. The LPC1758FBD80 belongs to the broader hierarchy of microcontroller, embedded processor, semiconductor, and power management system components. Its combination of on-chip flash, static RAM, serial networking, and communication peripherals makes it suitable for gateways, industrial controllers, data-acquisition equipment, and connected embedded products.
The device provides 512KB of flash for firmware and 64KB of SRAM for working memory, reducing dependence on external memory in compact designs. Its integrated Ethernet controller supports networked data acquisition, while USB 2.0 host, OTG, and device functions support service ports, peripheral connectivity, and firmware update workflows. The LPC1700 series also offers CAN 2.0B support for industrial and vehicle-related communication networks.
The LPC1758FBD80 combines a 32-bit Cortex-M3 processor with a broad set of application peripherals. Its integrated connectivity reduces board area and simplifies designs that would otherwise require multiple external interface controllers. A 100MHz operating frequency is listed for the LPC1758FBD80 family ordering configuration, supporting responsive control loops and efficient data handling. A 120MHz figure also appears in family-level documentation and should be checked against the specific clock configuration before design release.
Typical applications include industrial Ethernet gateways, USB-to-serial field-service equipment, CAN-connected machinery controllers, network management appliances, and compact embedded data loggers. The integrated network interfaces are particularly useful where a separate Ethernet controller would increase board complexity. Designers should still validate interrupt latency, peripheral clock requirements, PHY selection, and bus timing against the intended system architecture.
For PCB implementation, use the manufacturer pin description and land-pattern information when assigning the LQFP-80 footprint, programming connections, crystal circuitry, and decoupling. Keep the MCU supply rails, ground return paths, and high-speed Ethernet or USB routes arranged according to the reference design. Confirm crystal loading capacitors, brownout settings, boot configuration, and exposed programming pins before fabrication.
This product data combines the NXP device description, interface capabilities, package information, ordering-code references, engineering application guidance, and a structured comparison of same-family drop-in options. It is intended to accelerate component selection while requiring the final design to be validated against the NXP datasheet, user manual, hardware design guidance, and application-specific qualification requirements.
جایگزینهای drop-in برای LPC1758FBD80 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LPC1758FBD80 (همان فرمفاکتور و فوتپرینت) — متفاوت در Flash Memory, Package, ADC, Data Memory, Maximum CPU Frequency.
LPC1768FBD80
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LPC1778FBD80
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LPC1788FBD80
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LPC1758FBD80 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Core | ARM Cortex-M3 |
| Operating Frequency | 100 MHz |
| Flash Memory | 512KB |
| SRAM | 64KB |
| Program Memory Architecture | 512K x 8 bits |
| Ethernet Support | Integrated Ethernet controller |
| USB Support | USB 2.0 host, OTG, and device |
| CAN Support | CAN 2.0B |
| بستهبندی | 80-pin LQFP, 12mm x 12mm |
| نوع نصب | Surface mount |
| دمای کاری | -40°C to +85°C |
| Core Architecture | ARMv7-M |
| Family | LPC1700 series |
| Product Classification | Scalable mainstream 32-bit microcontroller |
| عرض گذرگاه داده | 32 bits |
راهنمای پیکربندی پین LPC1758FBD80 80-pin lqfp, 12mm x 12mm
پیکربندی پین برای LPC1758FBD80 (پکیج 80-pin lqfp, 12mm x 12mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای LPC1758FBD80.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LPC1758FBD80 مناسب است برای 6 کاربردs: Industrial Ethernet Gateway, USB Service and Configuration Interface, CAN-Connected Machinery Controller, Embedded Data Logger, Network Management Appliance, Connected Automotive Electronics.
Industrial Ethernet Gateway
The LPC1758FBD80 fits an industrial Ethernet gateway because it combines an ARM Cortex-M3 processor, 512KB flash, 64KB SRAM, and an integrated Ethernet controller in an 80-pin LQFP package. Its on-chip connectivity can reduce the need for a separate MAC controller and conserve board area in compact DIN-rail or panel-mounted equipment. An external Ethernet PHY is still required for physical-layer signaling, and the design must accommodate magnetics, line impedance, isolation, and EMC requirements. Its 100MHz listed operating frequency supports responsive protocol processing and local supervisory tasks. For a production design, calculate protocol-stack memory consumption, confirm Ethernet timing and PHY interface requirements, and reserve boot, firmware-update, watchdog, and recovery paths in the firmware architecture.
پیشنهادی
USB Service and Configuration Interface
The LPC1758FBD80 is appropriate for USB service equipment because its integrated USB 2.0 host, OTG, and device functions can provide a direct connection to a service PC or field-upgrade tool. The 512KB flash stores application firmware and update images, while 64KB SRAM supports protocol handling and control tasks. Device mode is especially useful for configuration, diagnostics, and firmware recovery, while host or OTG mode can support removable storage and peripheral control. Designers should verify the required USB connector, ESD protection, pull-up configuration, power-source requirements, and enumeration behavior against the NXP application information. The LQFP-80 footprint provides enough pins for separate USB data, programming, reset, clock, and status interfaces, but every net must be assigned from the official pin-description table.
پیشنهادی
CAN-Connected Machinery Controller
The LPC1758FBD80 fits CAN-connected machinery control because the LPC1700 family includes CAN 2.0B support and the device provides substantial firmware and data memory in one package. Its Cortex-M3 architecture can execute motor supervisory logic, handle CAN messages, and maintain local control loops without an external processor. A CAN transceiver is required to convert the MCU's logic-level interface into differential bus signals, and the design must account for termination, surge protection, isolation, and common-mode limits. The 100MHz listed clock rate supports time-critical servicing of control and communication tasks, but firmware should use the correct peripheral clocks and interrupt priorities. Before release, verify bus timing, transceiver standby behavior, fault recovery, watchdog behavior, and fail-safe outputs against the machinery safety requirements.
پیشنهادی
Embedded Data Logger
The LPC1758FBD80 supports a compact embedded data logger by combining 512KB flash, 64KB SRAM, Ethernet, USB, and CAN connectivity in a single microcontroller package. Firmware can sample sensors, buffer records locally, expose a service interface, and transmit summarized data over an industrial network. USB device connectivity provides a convenient configuration and recovery path, while Ethernet supports continuous collection into a supervisory system. Storage requirements should be evaluated separately because the integrated flash is primarily intended for firmware rather than an external data-logging medium. For reliable deployment, use a dedicated nonvolatile storage interface if records must survive power loss, implement timestamp and integrity checking, and protect data writes with supervisory logic. The LQFP-80 package also leaves access to multiple serial peripherals and general-purpose I/O for sensors and local human-interface devices.
پیشنهادی
Network Management Appliance
The LPC1758FBD80 is a reasonable foundation for a small network-management appliance when Ethernet, USB, and CAN interoperability are required in a controller-oriented design. The 512KB flash can hold a management application and diagnostic routines, while 64KB SRAM can support packet handling, status tables, and local control functions. Its integrated communications peripherals reduce board area compared with a design using separate USB and network interface controllers, although an Ethernet PHY and isolation or magnetics network remain external. Firmware partitioning should keep the network stack, management interface, logging, and update mechanism within the memory budget, with boot recovery planned before deployment. Validate throughput, packet-buffer requirements, DHCP behavior, link timing, thermal performance, and connector safety. The 80-pin LQFP package provides the pin count needed for communications, clock, reset, programming, and status connections.
پیشنهادی
Connected Automotive Electronics
The LPC1758FBD80 can be considered for connected automotive electronics where CAN, USB, and Ethernet-style communication capabilities align with a controller architecture. Its Cortex-M3 core, 512KB flash, and 64KB SRAM allow local control logic, diagnostics, and communications software to share one device. CAN 2.0B support is useful for vehicle or machinery networks, but a production automotive design requires a qualified transceiver, robust protection, functional-safety analysis, and environmental validation. The listed -40°C to +85°C temperature range is associated with the LPC1758 family ordering information and does not by itself establish AEC-Q100 qualification. Engineers should confirm the exact ordering code, qualification status, transient limits, brownout behavior, and diagnostic requirements before using the device in safety-relevant or regulated vehicle systems.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LPC1758FBD80 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LPC1768FBD80 | LPC1778FBD80 | LPC1788FBD80 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-pin LQFP, 12mm x 12mm | 80-pin LQFP, 12mm x 12mm | 80-pin LQFP, 12mm x 12mm | 80-pin LQFP, 12mm x 12mm |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit |
تفاوتهای کلیدی
- Larger flash allocation within the same LPC1700 LQFP80 family (در مقابلLPC1768FBD80)
- Integrated multi-protocol connectivity (در مقابلLPC1778FBD80)
- Mainstream Cortex-M3 resource profile (در مقابلLPC1788FBD80)
یادداشتهای طراحی
Use the NXP LQFP-80 land pattern and assign every signal from the official pin-description table. The target uses a 12mm by 12mm 80-pin LQFP package, so pad length, solder-mask clearance, paste volume, and courtyard dimensions should follow the manufacturer footprint rather than a generic QFP drawing. Verify programming access, reset, boot configuration, crystal connections, supply pins, ground pins, and communication interfaces before releasing the PCB.
Implement separate local decoupling paths for each MCU supply domain and validate voltage tolerances, sequencing, startup current, and brownout behavior against the NXP datasheet. Place the highest-frequency decoupling capacitor as close as practical to the relevant power and ground pins, with additional bulk capacitance placed near the supply entry point. Confirm power-loss behavior because an Ethernet gateway or data logger may need controlled shutdown rather than an abrupt reset.
Route USB and Ethernet signals as controlled-impedance interfaces, with differential geometry kept continuous and referenced to a continuous ground plane. Separate Ethernet magnetics and PHY placement from clocks and switching nodes, and observe the component placement and isolation guidance in the NXP hardware documentation. The MCU may integrate a network controller, but it does not replace the external PHY, line magnetics, connector protection, or required impedance-control structures.
Do not treat an ordering-code variant as an automatic substitute for LPC1758FBD80. LPC1758FBD80K and LPC1758FBD80,551 may change packing or temperature details, while LPC1758FBD80Y may represent another ordering condition. Confirm the complete suffix against the NXP ordering table and ensure the requested commercial configuration preserves the required package, grade, flash option, and lifecycle status.
اطلاعات انطباق
The -40°C to +85°C operating range is listed for the LPC1758FBD80K family entry. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact NXP ordering-code documentation.