Analog Devices

LT1058ISW - Quad JFET High-Speed Op Amp | Analog Devices

MPN: LT1058ISW ✓ सक्रिय
16-pin small-outline package Package
न्यूनतम ऑर्डर मात्रा: 1 |

LT1058ISW अवलोकन

Analog Devices LT1058ISW is a quad JFET-input precision high-speed operational amplifier packaged in a 16-pin small-outline package. The device combines four amplifiers in one package, allowing it to replace four discrete single JFET-input amplifiers while reducing board area, interconnect count, and repeated support-component requirements. Its stated 5 MHz feature identifies it as a high-speed amplifier within the LT1057/LT1058 precision JFET family.

A JFET-input operational amplifier is an analog amplifier whose input stage uses junction field-effect transistors. This input architecture is valued for high input impedance, low input bias current, and effective operation with high-impedance signal sources. In the broader device hierarchy, the LT1058ISW belongs to operational amplifiers, which are amplifier ICs used for voltage amplification, buffering, filtering, instrumentation, and signal conditioning. The quad configuration consolidates four amplifiers without requiring four separate packages.

The family is specifically described as providing JFET input, precision, and high-speed performance. These characteristics make it relevant to instrumentation, precision signal conditioning, data acquisition, and communications analog front ends. Quad integration is especially useful when several channels require similar electrical behavior, such as four sensor channels, dual-ended differential stages, or a combination of filters and buffers. Its 16-pin small-outline package supports surface-mount assembly while retaining a conventional analog IC footprint.

The LT1058 family shares a manufacturer datasheet with the LT1057, which is a matched JFET-input dual operational amplifier. The manufacturer describes the LT1057 as a precision, high-speed device in an 8-pin configuration, while the LT1058 provides the quad version. This relationship helps explain the family positioning: engineers can select the dual or quad configuration according to channel count, while retaining a consistent precision JFET-input design approach.

Typical uses include precision measurement front ends, low-leakage sensor interfaces, analog signal conditioning, instrumentation, and communications circuits requiring multiple high-impedance inputs. Because the LT1058ISW contains four amplifiers, designers can use it for balanced differential stages where matched channel behavior simplifies common-mode and differential-signal handling. It can also serve as a quad buffer when source impedance is high and the driven load is relatively light.

The primary design consideration is to verify every electrical limit, common-mode range, stability requirement, compensation choice, and power-supply condition against the LT1057/LT1058 manufacturer datasheet before layout. The four amplifiers share a package and power rails, so power budgeting, thermal rise, and bypass-capacitor placement should be evaluated for the complete device rather than as isolated channels. Stable operation also depends on the selected feedback network and output-load conditions.

This product page consolidates family identification, package information, commercial sourcing instructions, application guidance, and replacement-selection criteria. Its engineering value is the separation between confirmed device characteristics and parameters that must be confirmed in the manufacturer datasheet, helping engineers plan an LT1058ISW-based design without relying on assumptions about input bias current, offset voltage, noise, slew rate, common-mode range, or supply-current limits.

के लिए ड्रॉप-इन विकल्प LT1058ISW — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

LT1058ISW Maximum Ratings और Electrical Characteristics

Amplifier Type Quad precision high-speed operational amplifier
Input Stage JFET input
Number of Amplifiers 4 circuits
पिन की संख्या 16 pins
पैकेज 16-pin small-outline package
माउंटिंग प्रकार Surface mount
Gain-Bandwidth Feature 5 MHz

LT1058ISW 16-pin small-outline package पिन कॉन्फ़िगरेशन गाइड

LT1058ISW (16-pin small-outline package पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

LT1058ISW के लिए 16-pin small-outline package पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LT1058ISW.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LT1058ISW के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Instrumentation Front Ends, High-Impedance Sensor Signal Conditioning, Balanced Audio and Communication Inputs, Data Acquisition and Analog Filtering, Precision Buffering and Level Conditioning, Industrial Control and Measurement Systems.

🔧

Precision Instrumentation Front Ends

The LT1058ISW fits multichannel instrumentation because it provides four JFET-input amplifiers with a stated 5 MHz feature in one 16-pin surface-mount package. The four channels can support similar conditioning paths for sensors, instrumentation amplifiers, filters, or buffers while reducing package count. JFET inputs are useful when source impedance is high because they are designed for low-leakage signal acquisition. The design should still verify input bias current, input offset voltage, common-mode range, noise, and input-capacitance limits against the LT1057/LT1058 manufacturer datasheet. Place bypass capacitors close to the supply pins and keep sensitive input and feedback routes short to minimize pickup and stability risk.

🧩

High-Impedance Sensor Signal Conditioning

The LT1058ISW can condition several high-impedance sensor outputs when low input leakage and flexible channel allocation are important. Four JFET-input amplifiers may be arranged as two buffered differential channels, four unbuffered signal paths, or a mixture of amplifiers and filters. The 5 MHz listed feature provides a useful indication of the family's high-speed positioning, while the quad package keeps analog channels physically close. Engineers must confirm that the source impedance, sensor capacitance, and required settling time remain within the manufacturer's limits. Use short guarded input traces, clean grounding, and input filtering appropriate to the sensor bandwidth rather than assuming the amplifier alone eliminates interference.

🌐

Balanced Audio and Communication Inputs

The LT1058ISW is appropriate for balanced analog input stages that require two differential amplifier channels, leaving two amplifiers for buffering or auxiliary filtering. Its JFET-input architecture suits high-impedance sources, while the quad organization avoids four separate packages and reduces repeated grounding connections. The LT1058 family's stated precision and high-speed characteristics make it relevant to communication and audio signal paths, although channel-matching requirements, output swing, and noise must be reviewed for the actual application. Keep the two sides of each differential pair symmetrical in routing and grounding, and isolate output paths from sensitive inputs to reduce common-mode conversion and crosstalk.

🖥️

Data Acquisition and Analog Filtering

The LT1058ISW can implement the active-filter and buffering stages required by a multichannel data-acquisition front end. Its four JFET-input amplifiers provide enough channels for several conditioning blocks, and the stated 5 MHz feature supports designs that require more bandwidth than a general-purpose precision op amp may provide. Exact gain-bandwidth, slew-rate, and settling-time requirements must be checked in the family datasheet because channel interaction and filter stability depend on the selected noise gain. Use the manufacturer's recommended compensation and feedback values, maintain symmetric layouts for matched channels, and test the complete acquisition chain with realistic source impedance and sensor capacitance.

⚡

Precision Buffering and Level Conditioning

The LT1058ISW can provide four dedicated buffers where a circuit requires isolation between high-impedance sources and downstream analog blocks. JFET inputs are useful for avoiding excessive loading of sensitive sources, and combining four channels in one package simplifies routing and supply distribution. Buffer performance still depends on the exact output-current capability, capacitive-load stability, input-voltage range, and output-swing limits documented for the LT1058. Verify those conditions before assigning the device to a load. Place the device close to the buffered signal paths, use a low-impedance ground return, and provide local supply bypassing so the output of one channel does not create supply disturbance seen by another.

🏭

Industrial Control and Measurement Systems

The LT1058ISW can support analog measurement blocks in industrial equipment where several low-leakage input stages are needed close to the sensing circuitry. The quad package reduces board area compared with four single-amplifier packages, while the JFET-input stage supports source circuits that cannot tolerate substantial bias-current loading. For industrial use, verify the ordering code's temperature grade, supply limits, and package-specific thermal data against the manufacturer ordering information. Provide stable local supply rails, avoid routing high-current outputs beneath sensitive input traces, and design the feedback network to remain stable with the actual load and cable capacitance.

अनुशंसित उत्पादों का सारांश

LT1057 Matched dual member of the same JFET-input precision high-speed family उपयोग में: Precision Instrumentation Front Ends, High-Impedance Sensor Signal Conditioning, Balanced Audio and Communication Inputs, Data Acquisition and Analog Filtering, Precision Buffering and Level Conditioning, Industrial Control and Measurement Systems LT1058CN8 Quad member of the same amplifier family उपयोग में: Precision Instrumentation Front Ends, High-Impedance Sensor Signal Conditioning, Balanced Audio and Communication Inputs, Data Acquisition and Analog Filtering, Precision Buffering and Level Conditioning, Industrial Control and Measurement Systems
What is the LT1058ISW?
The LT1058ISW is a quad JFET-input precision high-speed operational amplifier from Analog Devices, with four amplifier circuits in a 16-pin small-outline surface-mount package. According to the Analog Devices LT1057/LT1058 datasheet, the family is intended to combine precision, high speed, and JFET-input operation. The quad organization reduces the package and support-component count compared with using four separate single amplifiers.
Why choose a quad JFET-input operational amplifier such as the LT1058ISW?
The LT1058ISW is useful when a design needs four high-impedance amplifier channels while preserving the benefits of a JFET input stage. The Analog Devices datasheet identifies the family as precision and high speed, and the manufacturer lists a 5 MHz feature for the LT1058. Quad integration can simplify balanced analog front ends, instrumentation channels, filters, and buffers, although each channel must still be checked for stability, load, and output-swing conditions.
Where can I download the LT1058ISW datasheet PDF?
The official LT1057/LT1058 family datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/10578fd.pdf. It covers the dual and quad JFET-input precision high-speed operational amplifiers. Use the pin-description and electrical-characteristics tables for the exact LT1058ISW ordering code, especially when planning input common-mode range, output swing, compensation, supply current, and thermal margins.
Where can I find the LT1058ISW pinout?
The LT1058ISW pin assignment is found in the pin-description section of the official Analog Devices LT1057/LT1058 datasheet. The component uses a 16-pin small-outline package, but the four amplifier channels, supply pins, and any unused positions must be assigned exactly as shown in the manufacturer table. Do not infer a generic 14-pin or 8-pin quad/dual footprint because the LT1058 package pin count differs from those configurations.
Is the LT1058ISW a drop-in replacement for an LT1057?
The LT1058ISW is not a direct drop-in replacement for the LT1057 because the LT1058 contains four amplifiers in a 16-pin package, whereas the LT1057 contains two amplifiers in an 8-pin package. Both belong to the same precision JFET-input family, but their pin counts, package dimensions, and channel counts differ. A replacement must use the same 16-pin footprint and preserve every required amplifier and supply connection.
What is the difference between the LT1058ISW and LT1057?
The primary difference is channel count and package size: the LT1058ISW provides four JFET-input amplifiers in a 16-pin small-outline package, while the LT1057 provides two matched JFET-input amplifiers in an 8-pin configuration. The Analog Devices datasheet groups both devices as precision, high-speed JFET-input amplifiers. Because the packages and pin counts differ, the LT1057 is a functional family comparison rather than a drop-in substitute for the LT1058ISW.
Can LT1058ISW replace LT1058SW?
The LT1058ISW and LT1058SW both refer to the 16-pin quad LT1058 family, but their ordering suffixes can encode different grade, temperature, finish, and shipping details. Compatibility must be checked against the manufacturer ordering table rather than assumed from the shared family name. Confirm package type, electrical grade, operating-temperature range, pin definition, and supply limits before releasing a replacement to production.
When should I choose the LT1058ISW instead of a discrete single JFET-input amplifier?
Choose the LT1058ISW when the design requires four amplifier channels and can benefit from one compact package, shared supply pins, and fewer board-level connections. It is especially appropriate for multi-channel instrumentation, balanced signal conditioning, and high-impedance sensor interfaces. Retain discrete single amplifiers when independent thermal placement, distinct supply management, exceptional channel matching, or a different electrical grade is required.
Is the LT1058ISW suitable for high-impedance sensor instrumentation?
The LT1058ISW is suitable for high-impedance sensor instrumentation when the application stays within the datasheet limits for input bias current, offset current, input capacitance, common-mode range, and noise. Its JFET input is designed for high input impedance, while the quad package can serve several sensor or differential channels in one location. Check source impedance and stray capacitance carefully to prevent gain errors and instability.
What are the key specifications of the LT1058ISW that engineers should know?
The confirmed headline specifications are four amplifier circuits, JFET input, a precision high-speed positioning, a 5 MHz listed feature, and a 16-pin small-outline surface-mount package. The Analog Devices family datasheet should be consulted for offset voltage, input bias current, noise density, slew rate, common-mode range, supply voltage, output swing, and current. This distinction prevents unsupported assumptions while preserving the critical architecture and packaging facts.
What can replace the LT1058ISW?
A valid replacement must be a drop-in quad JFET-input amplifier in the same 16-pin package, with compatible amplifier functions, supply limits, input range, offset behavior, speed, and output drive. No sufficiently documented cross-manufacturer drop-in replacement is identified for this exact ordering code, so do not treat a generic quad op amp as interchangeable. Use the Request a Quote form on this page to request assistance with an engineering cross-reference or approved second source.
What is the best cross-brand equivalent for the LT1058ISW?
No cross-brand equivalent can be recommended responsibly without a manufacturer-confirmed pin mapping and a parameter-by-parameter comparison for the 16-pin LT1058ISW. A same-footprint quad amplifier may still differ in bias current, offset, noise, slew rate, output swing, common-mode range, or stability behavior. Request a quote for the exact source device and ask for candidate drop-in parts whose documentation demonstrates electrical and mechanical compatibility.
How should the LT1058ISW be laid out for stable operation?
Place the power-supply bypass capacitors close to the supply pins, keep output and feedback routes short, and use a grounded return path that minimizes shared impedance with sensitive input signals. The Analog Devices datasheet's recommended operating and application information should govern feedback resistance, capacitance, output loading, and any noise-gain compensation. Because all four amplifiers share one package, route noisy outputs away from high-impedance input traces.
How do I check the LT1058ISW for thermal and power limitations?
Calculate total dissipation from the actual supply voltage, quiescent current, output swing, load current, and duty cycle, then compare the resulting junction-temperature estimate with the package limits in the manufacturer datasheet. All four channels share the package, so worst-case channel activity must be included. Use the Request a Quote form on this page for availability and current lead-time confirmation rather than relying on a static stock message.
Where to buy LT1058ISW online and what is the current lead time?
Use the Request a Quote form on this page to request LT1058ISW availability, current lead time, minimum order quantity, and the correct shipping format. Quote-based confirmation is appropriate because inventory and production timing can change independently of the device's technical status. Provide the exact LT1058ISW ordering code, target quantity, and delivery location so the request can be matched without confusing it with the lead-free-finish or tape-and-reel ordering variants.

के लिए इंजीनियरिंग संदर्भ डेटा LT1058ISW — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LT1058ISW when the design needs four JFET-input precision amplifiers and can use a 16-pin surface-mount package. It is particularly attractive for high-impedance sensor interfaces, balanced instrumentation, multichannel filtering, and buffering because combining four channels reduces package count and repeated connections. Choose the LT1057 instead when only two matched channels are required; it uses an 8-pin package and is a family alternative, not a pin-compatible substitute. Do not select a generic cross-brand quad amplifier solely from its bandwidth or JFET-input label. A true drop-in replacement must match the 16-pin footprint and amplifier mapping while meeting the required bias current, offset, noise, slew rate, common-mode range, output swing, supply, and stability limits. If the application requires a grade or temperature range different from the exact LT1058ISW ordering code, confirm the suffix against the manufacturer ordering table before releasing the design.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Package 16-pin small-outline package
Brand Analog Devices
Amplifier Count 4 circuits
Input Stage JFET input
Device Positioning Precision high-speed operational amplifier
Listed Gain-Bandwidth Feature 5 MHz
Mounting Type Surface mount
Number of Pins 16 pins

मुख्य विशेषताएँ

  • Four precision high-speed JFET-input channels in one package (बनामLT1057)
  • Broader channel capacity for multichannel analog designs (बनामLT1057)
  • High-speed family positioning for precision signal paths (बनामLT1057)

डिज़ाइन नोट्स

Keep the LT1058ISW close to the sources of high-impedance signals, but keep output and feedback traces away from those inputs. Route the four amplifier channels with matched geometry where channel matching affects performance. Place supply bypass capacitors adjacent to the package power pins and connect them to a low-impedance ground plane; do not route sensitive inputs over shared ground-current paths from outputs or external circuitry.

Do not treat every quad JFET-input amplifier as interchangeable with the LT1058ISW. Confirm the 16-pin footprint, amplifier functions, supply pins, input range, output swing, bias current, offset, noise, speed, and stability requirements against the LT1057/LT1058 manufacturer datasheet. A generic 14-pin quad amplifier may require a different board and different compensation even if its headline bandwidth appears similar.

For high-impedance sources, account for the amplifier input capacitance, cable capacitance, leakage, and external noise in the overall response. Short input and feedback traces reduce parasitic capacitance, while guarding or shielding can help when leakage and surface contamination dominate. Select the feedback and compensation network from the manufacturer's application guidance and verify settling performance with the actual source impedance and output load.

Estimated: use the actual dual-supply or single-supply configuration, quiescent current, output swing, load current, and duty cycle to calculate total package dissipation before relying on the device at the top of its operating-temperature range. The calculation is a design estimate rather than a datasheet rating. Because all four amplifiers dissipate within one package, evaluate the worst-case combination of channel activity and use the manufacturer thermal data for board-dependent temperature rise.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer product page and family datasheet were identified, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements for this exact ordering code were not confirmed.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LT1058ISW datasheet LT1058ISW pinout LT1058ISW datasheet pdf LT1058ISW specifications LT1058ISW equivalent LT1058ISW replacement LT1058ISW cross reference LT1058ISW footprint LT1058ISW price LT1058ISW stock Analog Devices LT1058ISW LT1058ISW application circuit LT1058ISW vs LT1057 LT1058ISW 5 MHz JFET op amp

संबंधित कंपोनेंट्स और शब्द

Analog Devices LT1058ISW LT1057 LT1058 quad operational amplifier precision operational amplifier high-speed operational amplifier JFET input JFET-input amplifier amplifier IC analog signal conditioning input impedance input bias current input offset voltage 5 MHz 16-pin small-outline package SOIC-16 surface mount SMD instrumentation data acquisition high-impedance sensor interface balanced differential input Analog Devices LT1057/LT1058 datasheet
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें