LT1058ISW - Quad JFET High-Speed Op Amp | Analog Devices
MPN: LT1058ISW ✓ AktifLT1058ISW Genel Bakış
A JFET-input operational amplifier is an analog amplifier whose input stage uses junction field-effect transistors. This input architecture is valued for high input impedance, low input bias current, and effective operation with high-impedance signal sources. In the broader device hierarchy, the LT1058ISW belongs to operational amplifiers, which are amplifier ICs used for voltage amplification, buffering, filtering, instrumentation, and signal conditioning. The quad configuration consolidates four amplifiers without requiring four separate packages.
The family is specifically described as providing JFET input, precision, and high-speed performance. These characteristics make it relevant to instrumentation, precision signal conditioning, data acquisition, and communications analog front ends. Quad integration is especially useful when several channels require similar electrical behavior, such as four sensor channels, dual-ended differential stages, or a combination of filters and buffers. Its 16-pin small-outline package supports surface-mount assembly while retaining a conventional analog IC footprint.
The LT1058 family shares a manufacturer datasheet with the LT1057, which is a matched JFET-input dual operational amplifier. The manufacturer describes the LT1057 as a precision, high-speed device in an 8-pin configuration, while the LT1058 provides the quad version. This relationship helps explain the family positioning: engineers can select the dual or quad configuration according to channel count, while retaining a consistent precision JFET-input design approach.
Typical uses include precision measurement front ends, low-leakage sensor interfaces, analog signal conditioning, instrumentation, and communications circuits requiring multiple high-impedance inputs. Because the LT1058ISW contains four amplifiers, designers can use it for balanced differential stages where matched channel behavior simplifies common-mode and differential-signal handling. It can also serve as a quad buffer when source impedance is high and the driven load is relatively light.
The primary design consideration is to verify every electrical limit, common-mode range, stability requirement, compensation choice, and power-supply condition against the LT1057/LT1058 manufacturer datasheet before layout. The four amplifiers share a package and power rails, so power budgeting, thermal rise, and bypass-capacitor placement should be evaluated for the complete device rather than as isolated channels. Stable operation also depends on the selected feedback network and output-load conditions.
This product page consolidates family identification, package information, commercial sourcing instructions, application guidance, and replacement-selection criteria. Its engineering value is the separation between confirmed device characteristics and parameters that must be confirmed in the manufacturer datasheet, helping engineers plan an LT1058ISW-based design without relying on assumptions about input bias current, offset voltage, noise, slew rate, common-mode range, or supply-current limits.
Drop-in alternatifler için LT1058ISW — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinLT1058ISW Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Quad precision high-speed operational amplifier |
| Input Stage | JFET input |
| Number of Amplifiers | 4 circuits |
| Pin Sayısı | 16 pins |
| Paket | 16-pin small-outline package |
| Montaj Türü | Surface mount |
| Gain-Bandwidth Feature | 5 MHz |
LT1058ISW 16-pin small-outline package Pin Yapısı Kılavuzu
LT1058ISW (16-pin small-outline package paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LT1058ISW.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LT1058ISW için uygundur 6 uygulamas: Precision Instrumentation Front Ends, High-Impedance Sensor Signal Conditioning, Balanced Audio and Communication Inputs, Data Acquisition and Analog Filtering, Precision Buffering and Level Conditioning, Industrial Control and Measurement Systems.
Precision Instrumentation Front Ends
The LT1058ISW fits multichannel instrumentation because it provides four JFET-input amplifiers with a stated 5 MHz feature in one 16-pin surface-mount package. The four channels can support similar conditioning paths for sensors, instrumentation amplifiers, filters, or buffers while reducing package count. JFET inputs are useful when source impedance is high because they are designed for low-leakage signal acquisition. The design should still verify input bias current, input offset voltage, common-mode range, noise, and input-capacitance limits against the LT1057/LT1058 manufacturer datasheet. Place bypass capacitors close to the supply pins and keep sensitive input and feedback routes short to minimize pickup and stability risk.
Önerilen
High-Impedance Sensor Signal Conditioning
The LT1058ISW can condition several high-impedance sensor outputs when low input leakage and flexible channel allocation are important. Four JFET-input amplifiers may be arranged as two buffered differential channels, four unbuffered signal paths, or a mixture of amplifiers and filters. The 5 MHz listed feature provides a useful indication of the family's high-speed positioning, while the quad package keeps analog channels physically close. Engineers must confirm that the source impedance, sensor capacitance, and required settling time remain within the manufacturer's limits. Use short guarded input traces, clean grounding, and input filtering appropriate to the sensor bandwidth rather than assuming the amplifier alone eliminates interference.
Önerilen
Balanced Audio and Communication Inputs
The LT1058ISW is appropriate for balanced analog input stages that require two differential amplifier channels, leaving two amplifiers for buffering or auxiliary filtering. Its JFET-input architecture suits high-impedance sources, while the quad organization avoids four separate packages and reduces repeated grounding connections. The LT1058 family's stated precision and high-speed characteristics make it relevant to communication and audio signal paths, although channel-matching requirements, output swing, and noise must be reviewed for the actual application. Keep the two sides of each differential pair symmetrical in routing and grounding, and isolate output paths from sensitive inputs to reduce common-mode conversion and crosstalk.
Önerilen
Data Acquisition and Analog Filtering
The LT1058ISW can implement the active-filter and buffering stages required by a multichannel data-acquisition front end. Its four JFET-input amplifiers provide enough channels for several conditioning blocks, and the stated 5 MHz feature supports designs that require more bandwidth than a general-purpose precision op amp may provide. Exact gain-bandwidth, slew-rate, and settling-time requirements must be checked in the family datasheet because channel interaction and filter stability depend on the selected noise gain. Use the manufacturer's recommended compensation and feedback values, maintain symmetric layouts for matched channels, and test the complete acquisition chain with realistic source impedance and sensor capacitance.
Önerilen
Precision Buffering and Level Conditioning
The LT1058ISW can provide four dedicated buffers where a circuit requires isolation between high-impedance sources and downstream analog blocks. JFET inputs are useful for avoiding excessive loading of sensitive sources, and combining four channels in one package simplifies routing and supply distribution. Buffer performance still depends on the exact output-current capability, capacitive-load stability, input-voltage range, and output-swing limits documented for the LT1058. Verify those conditions before assigning the device to a load. Place the device close to the buffered signal paths, use a low-impedance ground return, and provide local supply bypassing so the output of one channel does not create supply disturbance seen by another.
Önerilen
Industrial Control and Measurement Systems
The LT1058ISW can support analog measurement blocks in industrial equipment where several low-leakage input stages are needed close to the sensing circuitry. The quad package reduces board area compared with four single-amplifier packages, while the JFET-input stage supports source circuits that cannot tolerate substantial bias-current loading. For industrial use, verify the ordering code's temperature grade, supply limits, and package-specific thermal data against the manufacturer ordering information. Provide stable local supply rails, avoid routing high-current outputs beneath sensitive input traces, and design the feedback network to remain stable with the actual load and cable capacitance.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LT1058ISW — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 16-pin small-outline package |
| Brand | Analog Devices |
| Amplifier Count | 4 circuits |
| Input Stage | JFET input |
| Device Positioning | Precision high-speed operational amplifier |
| Listed Gain-Bandwidth Feature | 5 MHz |
| Mounting Type | Surface mount |
| Number of Pins | 16 pins |
Ana Farklılayıcılar
- Four precision high-speed JFET-input channels in one package (karşılaştırma:LT1057)
- Broader channel capacity for multichannel analog designs (karşılaştırma:LT1057)
- High-speed family positioning for precision signal paths (karşılaştırma:LT1057)
Tasarım Notları
Keep the LT1058ISW close to the sources of high-impedance signals, but keep output and feedback traces away from those inputs. Route the four amplifier channels with matched geometry where channel matching affects performance. Place supply bypass capacitors adjacent to the package power pins and connect them to a low-impedance ground plane; do not route sensitive inputs over shared ground-current paths from outputs or external circuitry.
Do not treat every quad JFET-input amplifier as interchangeable with the LT1058ISW. Confirm the 16-pin footprint, amplifier functions, supply pins, input range, output swing, bias current, offset, noise, speed, and stability requirements against the LT1057/LT1058 manufacturer datasheet. A generic 14-pin quad amplifier may require a different board and different compensation even if its headline bandwidth appears similar.
For high-impedance sources, account for the amplifier input capacitance, cable capacitance, leakage, and external noise in the overall response. Short input and feedback traces reduce parasitic capacitance, while guarding or shielding can help when leakage and surface contamination dominate. Select the feedback and compensation network from the manufacturer's application guidance and verify settling performance with the actual source impedance and output load.
Estimated: use the actual dual-supply or single-supply configuration, quiescent current, output swing, load current, and duty cycle to calculate total package dissipation before relying on the device at the top of its operating-temperature range. The calculation is a design estimate rather than a datasheet rating. Because all four amplifiers dissipate within one package, evaluate the worst-case combination of channel activity and use the manufacturer thermal data for board-dependent temperature rise.
Uyumluluk Bilgisi
The manufacturer product page and family datasheet were identified, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements for this exact ordering code were not confirmed.