LTC1164CJ - Low-Power Quad Switched-Capacitor Filter | Analog Devices
MPN: LTC1164CJ ✓ सक्रियLTC1164CJ अवलोकन
A switched-capacitor active filter is an analog signal-processing IC that uses clocked internal capacitors and switches to implement frequency-selective behavior. In the signal-chain hierarchy, the LTC1164 belongs to the active-filter category, which sits within analog integrated circuits and signal-conditioning systems. Instead of requiring a separate resistor, capacitor, and op-amp network for each second-order section, it provides four programmable building blocks on one integrated circuit.
The four second-order sections can implement low-pass, high-pass, band-pass, band-stop, and notch responses through external resistor and capacitor selection. Low-noise operation makes the device useful when filtering small signals before amplification or digitization. Its low-power architecture is also appropriate for portable instrumentation, compact data-acquisition systems, audio test equipment, and embedded measurement products where four filter channels must be accommodated without using four separate discrete filter networks.
The internal switched-capacitor architecture provides the main functional benefit of accurate, repeatable filter behavior tied to external clock and component selections. The characteristic trade-off is that switched-capacitor filters introduce clock-related noise and require a clean clock signal. Component tolerances also determine how closely the implemented cutoff, gain, and response shape match their intended values, so resistor and capacitor selection remains an important part of the filter design.
LTC1164CJ applications include anti-alias filtering ahead of analog-to-digital converters, noise rejection in low-level sensor interfaces, audio and communication signal conditioning, laboratory measurement systems, and programmable industrial test equipment. The 24-pin ceramic DIP package supports through-hole PCB construction and legacy instrumentation platforms that require a conventional dual-in-line footprint.
When laying out a circuit using the LTC1164CJ, keep clock and sensitive filter-node traces away from switching power paths, use a low-noise ground strategy, and place external clock and timing components close to their associated pins. Verify the selected component tolerances against the required cutoff frequency and response shape rather than relying only on nominal values.
This product page combines package, function, filter-class, supply-range, and ordering information with practical selection guidance. It also distinguishes verified production and ordering facts from package details and application advice that must be confirmed against the manufacturer datasheet before a new design is released.
के लिए ड्रॉप-इन विकल्प LTC1164CJ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
LTC1164MJ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LTC1164AMJ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LTC1164CJ Maximum Ratings और Electrical Characteristics
| Product Type | Quad universal switched-capacitor active filter |
| Number of Filter Building Blocks | 4 blocks |
| Filter Order per Building Block | 2nd order |
| Architecture | Switched-capacitor |
| Response Type | Universal |
| Typical Cutoff Frequency | 20 kHz |
| Typical Supply Current per Building Block | 850 µA |
| Typical Dual Supply Voltage | ±3 V or ±5 V |
| Minimum Dual Supply Voltage | ±2.37 V |
| Maximum Dual Supply Voltage | ±8 V |
| Temperature Grade | Industrial |
| Terminal Form | Through-hole |
| Number of Terminals | 24 terminals |
| Package Code | DIP |
| पैकेज | 24-pin ceramic DIP |
| माउंटिंग प्रकार | Through-hole |
LTC1164CJ 24-pin ceramic dip पिन कॉन्फ़िगरेशन गाइड
LTC1164CJ (24-pin ceramic dip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LTC1164CJ.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LTC1164CJ के लिए उपयुक्त है 6 अनुप्रयोगs: Anti-Alias Filtering for Data Acquisition, Low-Level Sensor Signal Conditioning, Audio Signal Conditioning, Programmable Industrial Test Equipment, Communication Signal Conditioning, Legacy Through-Hole Instrumentation.
Anti-Alias Filtering for Data Acquisition
The LTC1164CJ is appropriate ahead of an analog-to-digital converter when a compact, multi-section analog filter is needed to suppress out-of-band energy before sampling. Its four second-order switched-capacitor building blocks can be organized into multiple filtering paths or a higher-order composite response, while each section typically consumes 850 µA. The 20 kHz cutoff range and ±2.37 V to ±8 V supply capability suit low-power measurement systems. Engineers should determine the required cutoff and attenuation from the converter specification, select external timing and resistor components accordingly, and verify alias-rejection performance across the complete frequency range in the finished circuit.
Low-Level Sensor Signal Conditioning
The LTC1164CJ can condition small sensor signals before amplification or digitization by providing programmable low-pass, high-pass, band-pass, band-stop, or notch sections. Its low-noise, low-power operation is useful when preserving weak signals is more important than using discrete passive filter networks. Four independent second-order sections allow several channels or a more selective response to be implemented in one 24-pin ceramic DIP package. Component tolerance, clock feedthrough, signal range, and settling time must be checked against the manufacturer data sheet before the filter is placed directly in front of a precision sensor chain.
Audio Signal Conditioning
The LTC1164CJ is suitable for audio-band filtering where several second-order sections are needed to shape frequency response or reject noise outside the useful band. Its universal switched-capacitor architecture supports low-pass, high-pass, band-pass, band-stop, and notch configurations, and the 20 kHz cutoff range covers the upper audio band. The four building blocks can implement stereo or multi-channel filtering with a common device. Because clock-related feedthrough can affect audio noise performance, clock routing, grounding, external component selection, and output loading require careful evaluation using the manufacturer application guidance.
Programmable Industrial Test Equipment
The LTC1164CJ fits compact industrial instrumentation that needs several adjustable filter sections within a limited board area. Each section is a second-order universal switched-capacitor building block, allowing one IC to implement multiple filter responses without four separate discrete networks. The typical 850 µA consumption per section supports power-conscious portable test systems, while dual supplies from ±2.37 V to ±8 V provide compatibility with conventional bipolar analog signal levels. In production test equipment, validate clock stability, component tolerances, calibration range, and temperature performance over the complete operating environment before using the filter as a measurement front end.
Communication Signal Conditioning
The LTC1164CJ can provide channel-selective filtering in communication and interface modules that need low-power second-order analog sections. Its universal response capability allows external component choices to support band-pass or notch behavior around a selected frequency, while the four-section architecture can process several related channels. The 20 kHz usable cutoff range and typical ±3 V or ±5 V dual supplies fit low-speed signal-conditioning requirements. Designers should calculate the required center frequency and bandwidth, account for clock feedthrough and component tolerances, and confirm that the source amplitude remains within the manufacturer-specified operating range.
Legacy Through-Hole Instrumentation
The LTC1164CJ is appropriate for legacy through-hole instrument platforms that require four universal second-order filter sections on a 24-pin ceramic DIP footprint. The industrial temperature grade suits many industrial measurement environments, and the low-power architecture avoids the component count associated with four discrete active-filter networks. This makes the device useful when redesigning legacy analog boards or adding a selectable filter bank to laboratory equipment. Before production use, verify the exact package drawing, pin assignments, supply sequencing, clock source, and external component values against the manufacturer data sheet, especially when the board also supports more than one filter configuration.
के लिए इंजीनियरिंग संदर्भ डेटा LTC1164CJ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LTC1164MJ | LTC1164AMJ |
|---|---|---|---|
| Package | 24-pin ceramic DIP | 24-pin ceramic DIP | 24-pin ceramic DIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Quad universal switched-capacitor active filter | Quad universal switched-capacitor active filter | Quad universal switched-capacitor active filter |
| Number of Building Blocks | 4 | 4 | 4 |
| Filter Order per Building Block | 2nd order | 2nd order | 2nd order |
| Typical Cutoff Frequency | 20 kHz | 20 kHz | 20 kHz |
| Typical Supply Current per Building Block | 850 µA | 850 µA | 850 µA |
| Supply Voltage Range | ±2.37 V to ±8 V | ±2.37 V to ±8 V | ±2.37 V to ±8 V |
| Temperature Grade | Industrial | Military | Military |
| Mounting Type | Through-hole | Through-hole | Through-hole |
मुख्य विशेषताएँ
- Four integrated universal second-order sections (बनामLTC1164MJ)
- Industrial-grade family option (बनामLTC1164AMJ)
- Low-power quad-filter integration (बनामLTC1164MJ)
डिज़ाइन नोट्स
Route the clock away from sensitive filter inputs, outputs, and high-impedance nodes to minimize switching-energy coupling. Keep external timing components close to their associated pins, maintain a stable ground return for the clock source, and avoid sharing long return paths with switching regulators. Because the architecture uses clocked switched-capacitor networks, clock feedthrough can influence small-signal measurements even when the nominal filter response is correct.
Do not treat the four sections as independently unrestricted by the IC data sheet. Check each section's configured response, signal range, external component values, and sharing requirements before combining sections into a higher-order filter. Also account for the 850 µA typical current consumed by each building block when estimating the complete power budget. Component tolerances should be included in cutoff-frequency and gain-error calculations.
Use a conventional 24-pin through-hole footprint compatible with the manufacturer's ceramic DIP drawing and verify orientation against pin 1 before fabrication. Decouple each supply rail near the device, maintain a low-impedance analog ground structure, and isolate clock and filter-node routing from high-current switching paths. If the board combines the filter with converters or digital logic, complete layout review should occur before copper release.
अनुपालन जानकारी
The Analog Devices product page identifies LTC1164 as a production family, but the product-level RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed. AEC-Q100 is not applicable to this industrial-grade active filter.